Plasmid-encoded initiation protein is required for activity at all three origins of plasmid R6K DNA replication in vitro

DNA replication of plasmid R6K initiates at three unique sites, ori alpha, ori beta, and ori gamma. Replicating DNA molecules of a deletion derivative of R6K were synthesized in an in vitro system containing pi protein fraction from cells carrying a mini-R6K derivative that produced only this initiation protein as an R6K-encoded protein and analyzed by electron miscroscopy. Requirement of pi protein for the activity of all these three replication origins in vitro was verified. Frequencies of initiation at the three origins were almost equal.     

Comparison of the CopB systems of plasmids R1 and Co1V2-K94: A single base alteration in CopB gene is responsible for the increased copy number of the low copy number plasmid CoIV2-K94

Summary We have isolated a deletion mutation and a point mutation in the copB gene of the replication region Repl of the IncFI plasmid Co1V2-K94. Subsequently, this copB gene with and without point mutation was cloned and sequenced, and the point mutation was mapped in the coding region of copB with a change of one amino acid from arginine to serine. Furthermore, this copB mutant had an approximately 10-fold increase in copy number. The CopB-phenotype of Co1V2-K94 could be complemented in trans by the copB gene of coresident IncFII plasmids such as R1 and R538, but not R100, suggesting that ColV2-K94 and R1 or R538 contain the same copB allele.     

Generation of miniplasmids from copy number mutants of the R plasmid NR1.

Small, closed circular deoxyribonucleic acid molecules, called miniplasmids, were observed in Escherichia coli harboring copy number mutants of the R plasmid NR1 after growth in medium containing tetracycline. The level of tetracycline resistance conferred by the copy mutant plasmids was lower (3 to 6 microgram/ml) than that conferred by NR1 (100 MICROGRAM/ML). The presence of the miniplasmid enhanced the level of tetracycline resistance conferred by the copy mutant. Miniplasmids of molecular weights 4 X 10(6) to 13 X 10(6) were found. They carried no antibiotic resistance markers and could be eliminated by growth in the presence of chloramphenicol and/or streptomycin-spectinomycin. Studies with the restriction endonucleases EcoRI and Sal I indicated that the miniplasmids are derived from the region of the copy mutant plasmids that contains the origin for replication of the resistance transfer factor. There were approximately 12 copies of the miniplasmid per chromosome, compared with 3 and 6 copies of the copy mutants of NR1. The miniplasmids appeared to be incompatible with the copy mutant plasmids.     

Replication of plasmid R6K in DNA polymerase deficient mutants of Escherichia coli.

The plasmid R6K has been introduced into a number of Escherichia coli polymerase deficient (pol) mutants. In polCts mutants transferred to the nonpermissive temperature to inactivate polymerase III, R6K replicates but the replication products have a density in dye-CsCl gradients intermediate between supercoiled and linear forms. This aberrant replication requires normal cellular levels of polymerase I since it does not occur in polA polCts mutants. Normal R6K replication and maintenance occur in a polA polB polC+ host, however, we cannot tell from our experiments wheather polymerase I or III replicates R6K in polA+ polC+ host. Polymerase II, the polB gene product, has no detectable role in R6K replication.     

A single amino acid difference between Rep proteins of P1 and P7 affects plasmid copy number

P1 and P7 are closely related plasmid prophages which are members of the same incompatibility group. We report the complete DNA sequence of the replication region of P7 and compare it to that of P1. The sequence predicts a single amino acid difference between the RepA proteins of these two plasmids, no differences in methylation sites or regions where dnaA protein is expected to bind, and no difference in the spacing of the major features of the two replicons. A P1 replicon with a mutation in repA, the gene that encodes an essential replication protein, is complemented for replication by providing either the P1 RepA protein (RepA1) or the P7 RepA protein (RepA7) in trans. Furthermore, when either of these proteins is supplied in trans, the plasmid copy number of P1 cop mutants drops to that of P1 cop+. However, when RepA7 is supplied, the copy number of P1 cop and P1 cop+ is higher than that when RepA1 is supplied. This indicates that the single amino acid difference between the two versions of the RepA protein plays an important role in determining the plasmid copy number.     

Analysis of dominant copy number mutants of the plasmid pMB1.

We characterize two dominant copy number mutants of a derivative of plasmid pMB1. One of the two mutations maps in the -35 region of the primer promoter and results in increased promoter activity. The analysis of the secondary structure in the proximity of the mutant sequence suggests a possible mechanism which could be the basis of the promoter-up phenotype. By comparing the properties of the mutant and the wild type plasmid in an in vitro system, we confirm that the primer and not its coding sequence is the target of RNA I inhibition. The second mutation affects the sequence of the primer so that it is less sensitive to inhibition by RNA I. We propose that this mutation stabilizes a secondary structure necessary for primer formation.     

An initiator protein for plasmid R6K DNA replication. Mutations affecting the copy-number control

Two kinds of mutations affecting the copy-number control of plasmid R6K were isolated and identified in an initiator pi protein by DNA sequencing. Firstly, a temperature-sensitive replication mutation, ts22, with decreased copy number results in a substitution of threonine to isoleucine at position 138 of the 305-amino-acid pi protein. Secondly, a high-copy-number (cop21) mutant was isolated from this ts mutant and was identified by an alteration of alanine to serine at position 162. This cop21 mutation suppressed the Ts character and was recessive to the wild-type allele in the copy control.     

Isolation and preliminary characterization of R6K plasmid deletion mutants.

Several deletion mutants of R6K have been isolated by mutagen treatment of bacterial host carrying wild type of the plasmid and search for clones that lost ampicillin or streptomycin resistance. The molecular weight of the mutants as estimated by agarose gel electrophoresis was 15 times 10(6) minus 23 times 10(6) compared to 26 times 10(6) for the parental plasmid. The mutants were characterized in respect of the level of resistance to ampicillin and frequency of conjugational transfer. Some of the mutants were found to differ in Eco RI digestion pattern from the wild type.     

Replication of antibiotic resistance plasmid R6K DNA in vitro.

A soluble extract prepared from cells of an Escherichia coli strain carrying the antibiotic resistance plasmid R6K is capable of carrying out the complete process of R6K DNA replication. DNA synthesis in vitro is dependent on the four deoxyribo- and ribonucleotide triphosphates and is sensitive to rifampin and streptolydigin, inhibitors of DNA-dependent RNA polymerase. The incorporation of deoxyribonucleotides into R6K DNA also is sensitive to actinomycin D, novobiocin, arabinofuranosyl-CTP, and N-ethylmaleimide. Kinetics of synthesis are linear for 60 to 120 min. Replication proceeds semiconservatively and supercoiled closed-circular DNA molecules are synthesized. Analysis by alkaline sucrose gradient centrifugation indicated that the early R6K DNA products contain DNA fragments of approximately 18 S in size, corresponding to the length between the R6K alpha origin of replication and the terminus of replication observed in vivo. Addition of exogenous supercoiled R6K DNA is inhibitory to the in vitro system, whereas the addition of R6K DNA in the form of relaxation complex stimulates R6K DNA synthesis to a small extent.     

A mathematical model for lambda dv plasmid replication: analysis of copy number mutants

A mathematical model based on the molecular control mechanisms for lambda dv plasmid replication in a single Escherichia coli cell has been applied to simulate replication of mutant lambda dv plasmids. Model simulations of changes in repressor level and copy number resulting from mutations in the promoter-operator PROR region are consistent with experimental data. Calculated effects on lambda dv plasmid copy number of oligomer formation and of alternations in termination efficiency at tR1 also agree with experiment. The model has been employed to simulate the influence of cro mutants and of cro and tR1 double mutants on copy number and stable maintenance of lambda dv plasmid copy number. The genetic structure included in formulation of the replicon model provides a framework for relating changes in specific genetic loci on the plasmid with resulting alterations in host-plasmid system function.     

Membrane-bound fractions of R6K plasmid DNA in Escherichia coli.

The intracellular location of plasmid DNA has been of interest in an effort to understand the maintenance of these molecules. We have employed a simple procedure which enables us to isolate from exponentially grown cells on sucrose gradients membrane-complexed forms of R6K plasmid DNA. Electron micrographs identified the complexing of membrane fractions to circular forms of R6K DNA. Biochemical studies of the complexed R6K molecules showed the presence of membrane-specific proteins and suggested that complexing of R6K DNA was primarily with inner membrane fractions of Escherichia coli.     

Structure-based functional analysis of the replication protein of plasmid R6K: key amino acids at the pi/DNA interface

In previous work, we characterized the bases in an iteron of plasmid R6K that are important for the binding of pi protein monomers and dimers. Here we investigate the following six amino acids of pi, encoded by pir, hypothesized to be important for DNA contact: Ser71, Try74, Gly131, Gly211, Arg225, and Arg254.     

Enhancer-origin interaction in plasmid R6K involves a DNA loop mediated by initiator protein

Initiation of DNA replication from ori beta of plasmid R6K requires the presence of the ori gamma sequence in cis. We demonstrate that binding of initiator protein to the seven strong, tandem binding sites in gamma increases binding of the protein at the very weak binding site present in ori beta by cooperativity at a distance. The gamma-beta interaction via the initiator results in a DNA loop, as revealed by the novel technique of cyclization enhancement and as confirmed by exonuclease III protection, electron microscopy, and chemical footprinting. The protein-mediated gamma-beta interaction in vitro suggests that the cooperative interaction of gamma-bound protein with the beta sequence by DNA looping is an early step in the initiation of DNA replication at the beta origin of R6K.     

DNA segments of the IncX plasmid R485 determining replication and incompatibility with plasmid R6K

The expression of incompatibility properties between the IncX plasmids R6K and R485 of Escherichia coli was examined. For small autonomously replicating derivatives of both plasmid elements, the requirements for incompatibility expression include a functional R485 replicon and an active R6K beta-origin region. Functional R6K alpha and gamma origins are not directly involved in incompatibility expression between R6K and R485. A trans-acting replication system was constructed for plasmid R485. It consists of a 3.2-(kb) DNA fragment of R485 that specifies a product(s) in trans which supports replication from an R485 origin plasmid. A minimal R485 origin region of 591 bp was derived utilizing this trans-acting replication system and the nucleotide sequence of this origin region determined. The most striking feature of the sequence is the presence of six tandem 22-bp nucleotide sequence direct repeats.