原子力显微镜单分子力谱研究生物分子间相互作用

原子力显微镜单分子力谱是近年来发展起来的能在单分子水平研究生物分子相互作用的新工具。本文综述了单分子力谱的测定原理、方法及其在研究蛋白．蛋白、蛋白-DNA相互作用,蛋白质去折叠和活细胞上配体／受体结合中的应用进展。     

High-speed atomic force microscopy: Imaging and force spectroscopy

Atomic force microscopy (AFM) is the type of scanning probe microscopy that is probably best adapted for imaging biological samples in physiological conditions with submolecular lateral and vertical resolution. In addition, AFM is a method of choice to study the mechanical unfolding of proteins or for cellular force spectroscopy. In spite of 28 years of successful use in biological sciences, AFM is far from enjoying the same popularity as electron and fluorescence microscopy. The advent of high-speed atomic force microscopy (HS-AFM), about 10 years ago, has provided unprecedented insights into the dynamics of membrane proteins and molecular machines from the single-molecule to the cellular level. HS-AFM imaging at nanometer-resolution and sub-second frame rate may open novel research fields depicting dynamic events at the single bio-molecule level. As such, HS-AFM is complementary to other structural and cellular biology techniques, and hopefully will gain acceptance from researchers from various fields. In this review we describe some of the most recent reports of dynamic bio-molecular imaging by HS-AFM, as well as the advent of high-speed force spectroscopy (HS-FS) for single protein unfolding.     

Direct visualization of KirBac3.1 potassium channel gating by atomic force microscopy

KirBac3.1 belongs to a family of transmembrane potassium (K⁺) channels that permit the selective flow of K-ions across biological membranes and thereby regulate cell excitability. They are crucial for a wide range of biological processes and mutations in their genes cause multiple human diseases. Opening and closing (gating) of Kir channels may occur spontaneously but is modulated by numerous intracellular ligands that bind to the channel itself. These include lipids (such as PIP₂), G-proteins, nucleotides (such as ATP) and ions (e.g. H⁺, Mg²⁺, Ca²⁺). We have used high-resolution atomic force microscopy (AFM) to examine KirBac3.1 in two different configurations. AFM imaging of the cytoplasmic surface of KirBac3.1 embedded in a lipid bilayer has allowed visualization of the tetrameric assembly of the ligand-binding domain. In the absence of Mg²⁺, the four subunits appeared as four protrusions surrounding a central depression corresponding to the cytoplasmic pore. They did not display 4-fold symmetry, but formed a dimer-of-dimers with 2-fold symmetry. Upon addition of Mg²⁺, a marked rearrangement of the intracellular ligand-binding domains was observed: the four protrusions condensed into a single protrusion per tetramer, and there was an accompanying increase in protrusion height. The central cavity within the four intracellular domains also disappeared on addition of Mg²⁺, indicating constriction of the cytoplasmic pore. These structural changes are likely transduced to the transmembrane helices, which gate the K⁺ channel. This is the first time AFM has been used as an interactive tool to study K⁺ channels. It has enabled us to directly measure the conformational changes in the protein surface produced by ligand binding.     

Observation of single-stranded DNA on mica and highly oriented pyrolytic graphite by atomic force microscopy

Atomic force microscopy was used to image single-stranded DNA (ssDNA) adsorbed on mica modified by Mg(2+), by 3-aminopropyltriethoxysilane or on modified highly oriented pyrolytic graphite (HOPG). ssDNA molecules on mica have compact structures with lumps, loops and super twisting, while on modified HOPG graphite ssDNA molecules adopt a conformation without secondary structures. We have shown that the immobilization of ssDNA under standard conditions on modified HOPG eliminates intramolecular base-pairing, thus this method could be important for studying certain processes involving ssDNA in more details.     

Specific anchoring modes of two distinct dystrophin rod sub-domains interacting in phospholipid Langmuir films studied by atomic force microscopy and PM-IRRAS

Dystrophin rod repeats 1-3 sub-domain binds to acidic phosphatidylserine in a small vesicle binding assay, while the repeats 20-24 sub-domain does not. In the present work, we studied the adsorption behaviour of both sub-domains at the air/liquid interface and at the air/lipid interface in a Langmuir trough in order to highlight differences in interfacial properties. The adsorption behaviour of the two proteins at the air/liquid interface shows that they display surface activity while maintaining their alpha-helical secondary structure as shown by PM-IRRAS. Strikingly, R20-24 needs to be highly hydrated even at the interface, while this is not the case for R1-3, indicating that the surface activity is dramatically higher for R1-3 than R20-24. Surface-pressure measurements, atomic force microscopy and PM-IRRAS are used in a Langmuir experiment with DOPC-DOPS monolayers at two different surface pressures, 20 mN/m and 30 mN/m. At the lower surface pressure, the proteins are adsorbed at the lipid film interface while maintaining its alpha-helical structure. After an increase of the surface pressure, R1-3 subsequently produces a stable film, while R20-24 induces a reorganization of the lipid film with a subsequent decrease of the surface pressure close to the initial value. AFM and PM-IRRAS show that R1-3 is present in high amounts at the interface, being arranged in clusters representing 3.3% of the surface at low pressure. By contrast, R20-24 is present at the interface in small amounts bound only by a few electrostatic residues to the lipid film while the major part of the molecule remains floating in the sub-phase. Then for R1-3, the electrostatic interaction between the proteins and the film is enhanced by hydrophobic interactions. At higher surface pressure, the number of protein clusters increases and becomes closer in both cases implying the electrostatic character of the binding. These results indicate that even if the repeats exhibit large structural similarities, their interfacial properties are highly contrasted by their differential anchor mode in the membrane. Our work provides strong support for distinct physiological roles for the spectrin-like repeats and may partly explain the effects of therapeutic replacement of dystrophin deficiency by minidystrophins.     

Identification of P2X2/P2X4/P2X6 heterotrimeric receptors using atomic force microscopy (AFM) imaging

Seven P2X purinergic receptor subunits have been identified: P2X1–P2X7. The overlapping expression of P2X2, P2X4 and P2X6 subunits has been shown in different cell types, and functional analysis of P2X receptors in Leydig cells suggests that the three subunits might interact. Here, His₆-tagged P2X2, HA-tagged P2X4 and FLAG-tagged P2X6 subunits were co-expressed in tsA 201 cells. After sequential co-immunoprecipitation using anti-HA and anti-FLAG beads, all three subunits were present, demonstrating their interaction. Atomic force microscopy (AFM) imaging revealed receptors that were specifically decorated by both an anti-His₆ antibody and an anti-HA Fab fragment, indicating the presence of a P2X2/4/6 heterotrimer. To our knowledge, this is the first report of a P2X receptor containing three different subunits.     

Functionalization of amino-modified probes for atomic force microscopy

The probes for atomic force microscopy (AFM) functionalized with bovine serum albumin (BSA) were obtained; they can be used for molecular recognition studies. The procedure of modification and functionalization of the AFM probe included three stages. First, amino probes were obtained by modification in vapors of an amino silane derivative. Then, a covalent bond was formed between the surface amino groups of the probe and a homobifunctional aminoreactive crosslinker. Finally, the probe with a covalently attached crosslinker was functionalized with BSA molecules. The AFM probes were characterized by force measurements at different stages of the modification; the adhesion force and the work of adhesion force were determined. The modification process was confirmed by visualization of BSA and supercoiled pGEMEX DNA molecules immobilized on the standard amino mica and on amino mica modified with a crosslinker.     

原子力显微技术在酶学研究中的应用

酶在生物体的生命活动中占有及其重要的地位,机体功能的和谐统一有赖于酶的作用。原子力显微技术(AFM)作为一门新发展起来的技术,为人们认识酶的结构与功能提供了又一新的窗口。AFM能够在生理条件下对生物样品进行三维成像,在分子水平上实时监测生理生化反应。AFM还能够在皮牛顿精度上测定分子间作用力。目前,AFM已用于单分子酶的化学性质及其作用原理的研究。本简述AFM在酶学中的应用情况。     

Exploring the mechanical properties of single vimentin intermediate filaments by atomic force microscopy

Intermediate filaments (IFs), together with actin filaments and microtubules, compose the cytoskeleton. Among other functions, IFs impart mechanical stability to cells when exposed to mechanical stress and act as a support when the other cytoskeletal filaments cannot keep the structural integrity of the cells. Here we present a study on the bending properties of single vimentin IFs in which we used an atomic force microscopy (AFM) tip to elastically deform single filaments hanging over a porous membrane. We obtained a value for the bending modulus of non-stabilized IFs between 300 MPa and 400 MPa. Our results together with previous ones suggest that IFs present axial sliding between their constitutive building blocks and therefore have a bending modulus that depends on the filament length. Measurements of glutaraldehyde-stabilized filaments were also performed to reduce the axial sliding between subunits and therefore provide a lower limit estimate of the Young's modulus of the filaments. The results show an increment of two to three times in the bending modulus for the stabilized IFs with respect to the non-stabilized ones, suggesting that the Young's modulus of vimentin IFs should be around 900 MPa or higher.     

Ultra-high resolution imaging of DNA and nucleosomes using non-contact atomic force microscopy

Visualisation of nano-scale biomolecules aids understanding and development in molecular biology and nanotechnology. Detailed structure of nucleosomes adsorbed to mica has been captured in the absence of chemical-anchoring techniques, demonstrating the usefulness of non-contact atomic force microscopy (NC-AFM) for ultra-high resolution biomolecular imaging. NC-AFM offers significant advantages in terms of resolution, speed and ease of sample preparation when compared to techniques such as cryo-electron microscopy and X-ray crystallography. In the absence of chemical modification, detailed structure of DNA deposited on a gold substrate was observed for the first time using NC-AFM, opening up possibilities for investigating the electrical properties of unmodified DNA.     

Probing Interactions within the synaptic DNA-SfiI complex by AFM force spectroscopy

SfiI belongs to a family of restriction enzymes that function as tetramers, binding two recognition regions for the DNA cleavage reaction. The SfiI protein is an attractive and convenient model for studying synaptic complexes between DNA and proteins capable of site-specific binding. The enzymatic action of SfiI has been very well characterized. However, the properties of the complex before the cleavage reaction are not clear. We used single-molecule force spectroscopy to analyze the strength of interactions within the SfiI-DNA complex. In these experiments, the stability of the synaptic complex formed by the enzyme and two DNA duplexes was probed in a series of approach-retraction cycles. In order to do this, one duplex was tethered to the surface and the other was tethered to the probe. The complex was formed by the protein present in the solution. An alternative setup, in which the protein was anchored to the surface, allowed us to probe the stability of the complex formed with only one duplex in the approach-retraction experiments, with the duplex immobilized at the probe tip. Both types of complexes are characterized by similar rupture forces. The stability of the complex was determined by measuring the dependence of rupture forces on force loading rates (dynamic force spectroscopy) and the results suggest that the dissociation reaction of the SfiI-DNA complex has a single energy barrier along the dissociation path. Dynamic force spectroscopy was instrumental in revealing the role of the 5 bp spacer region within the palindromic recognition site on DNA-SfiI in the stability of the complex. The data show that, although the change of non-specific sequence does not alter the position of the activation barrier, it changes values of the off rates significantly.     

Point mutations in membrane proteins reshape energy landscape and populate different unfolding pathways

Using single-molecule force spectroscopy, we investigated the effect of single point mutations on the energy landscape and unfolding pathways of the transmembrane protein bacteriorhodopsin. We show that the unfolding energy barriers in the energy landscape of the membrane protein followed a simple two-state behavior and represent a manifestation of many converging unfolding pathways. Although the unfolding pathways of wild-type and mutant bacteriorhodopsin did not change, indicating the presence of same ensemble of structural unfolding intermediates, the free energies of the rate-limiting transition states of the bacteriorhodopsin mutants decreased as the distance of those transition states to the folded intermediate states decreased. Thus, all mutants exhibited Hammond behavior and a change in the free energies of the intermediates along the unfolding reaction coordinate and, consequently, their relative occupancies. This is the first experimental proof showing that point mutations can reshape the free energy landscape of a membrane protein and force single proteins to populate certain unfolding pathways over others.     

Mechanism of formation of amyloid protofibrils of barstar from soluble oligomers: evidence for multiple steps and lateral association coupled to conformational conversion

Understanding the heterogeneity of the soluble oligomers and protofibrillar structures that form initially during the process of amyloid fibril formation is a critical aspect of elucidating the mechanism of amyloid fibril formation by proteins. The small protein barstar offers itself as a good model protein for understanding this aspect of amyloid fibril formation, because it forms a stable soluble oligomer, the A form, at low pH, which can transform into protofibrils. The mechanism of formation of protofibrils from soluble oligomer has been studied by multiple structural probes, including binding to the fluorescent dye thioflavin T, circular dichroism and dynamic light scattering, and at different temperatures and different protein concentrations. The kinetics of the increase in any probe signal are single exponential, and the rate measured depends on the structural probe used to monitor the reaction. Fastest is the rate of increase in the mean hydrodynamic radius, which grows from a value of 6 nm for the A form to 20 nm for the protofibril. Slower is the rate of increase in thioflavin T binding capacity, and slowest is the rate of increase in circular dichroism at 216 nm, which occurs at about the same rate as that of the increase in light scattering intensity. The dynamic light scattering measurements suggest that the A form transforms completely into larger size aggregates at an early stage during the aggregation process. It appears that structural changes within the aggregates occur at the late stages of assembly into protofibrils. For all probes, and at all temperatures, no initial lag phase in protofibril growth is observed for protein concentrations in the range of 1 microM to 50 microM. The absence of a lag phase in the increase of any probe signal suggests that aggregation of the A form to protofibrils is not nucleation dependent. In addition, the absence of a lag phase in the increase of light scattering intensity, which changes the slowest, suggests that protofibril formation occurs through more than one pathway. The rate of aggregation increases with increasing protein concentration, but saturates at high concentrations. An analysis of the dependence of the apparent rates of protofibril formation, determined by the four structural probes, indicates that the slowest step during protofibil formation is lateral association of linear aggregates. Conformational conversion occurs concurrently with lateral association, and does so in two steps leading to the creation of thioflavin T binding sites and then to an increase in beta-sheet structure. Overall, the study indicates that growth during protofibril formation occurs step-wise through progressively larger and larger aggregates, via multiple pathways, and finally through lateral association of critical aggregates.     

原子力显微镜在细胞弹性研究中的应用

细胞表面的力学性质会随着细胞所处环境的不同而发生改变,它的变化间接反映出胞内复杂的生理过程。原子力显微镜（atomic force microscope,AFM）能以高的灵敏度和分辨率检测活体细胞,通过利用赫兹模型分析力曲线可以获得细胞的弹性信息。本文简介了原子力显微镜的工作原理与工作模式,着重介绍利用AFM力曲线检测细胞弹性的方法及其在细胞运动、细胞骨架、细胞黏附、细胞病理等方面的应用成果,表明AFM已经成为细胞弹性研究中十分重要的显微技术。     

Single molecule studies of antibody-antigen interaction strength versus intra-molecular antigen stability

We investigated molecular recognition of antibodies to membrane-antigens and extraction of the antigens out of membranes at the single molecule level. Using dynamic force microscopy imaging and enzyme immunoassay, binding of anti-sendai antibodies to sendai-epitopes genetically fused into bacteriorhodopsin molecules from purple membranes were detected under physiological conditions. The antibody/antigen interaction strength of 70-170 pN at loading rates of 2-50 nN/second yielded a barrier width of x = 0.12 nm and a kinetic off-rate (corresponding to the barrier height) of k(off) = 6s(-1), respectively. Bacteriorhodopsin unfolding revealed a characteristic intra-molecular force pattern, in which wild-type and sendai-bacteriorhodopsin molecules were clearly distinguishable in their length distributions, originating from the additional 13 amino acid residues epitope in sendai purple membranes. The inter-molecular antibody/antigen unbinding force was significantly lower than the force required to mechanically extract the binding epitope-containing helix pair out of the membrane and unfold it (126 pN compared to 204 pN at the same loading rate), meeting the expectation that inter-molecular unbinding forces are weaker than intra-molecular unfolding forces responsible for stabilizing native conformations of proteins.     

The elastic modulus of Matrigel as determined by atomic force microscopy

Recent studies indicate that the biophysical properties of the cellular microenvironment strongly influence a variety of fundamental cell behaviors. The extracellular matrix’s (ECM) response to mechanical force, described mathematically as the elastic modulus, is believed to play a particularly critical role in regulatory and pathological cell behaviors. The basement membrane (BM) is a specialization of the ECM that serves as the immediate interface for many cell types (e.g. all epithelial cells) and through which cells are connected to the underlying stroma. Matrigel is a commercially available BM-like complex and serves as an easily accessible experimental simulant of native BMs. However, the local elastic modulus of Matrigel has not been defined under physiological conditions. Here we present the procedures and results of indentation tests performed on Matrigel with atomic force microscopy (AFM) in an aqueous, temperature controlled environment. The average modulus value was found to be approximately 450 Pa. However, this result is considerably higher than macroscopic shear storage moduli reported in the scientific literature. The reason for this discrepancy is believed to result from differences in test methods and the tendency of Matrigel to soften at temperatures below 37° C.     

Mechanics and structure of titin oligomers explored with atomic force microscopy

Titin is a giant polypeptide that spans half of the striated muscle sarcomere and generates passive force upon stretch. To explore the elastic response and structure of single molecules and oligomers of titin, we carried out molecular force spectroscopy and atomic force microscopy (AFM) on purified full-length skeletal-muscle titin. From the force data, apparent persistence lengths as long as ∼1.5 nm were obtained for the single, unfolded titin molecule. Furthermore, data suggest that titin molecules may globally associate into oligomers which mechanically behave as independent wormlike chains (WLCs). Consistent with this, AFM of surface-adsorbed titin molecules revealed the presence of oligomers. Although oligomers may form globally via head-to-head association of titin, the constituent molecules otherwise appear independent from each other along their contour. Based on the global association but local independence of titin molecules, we discuss a mechanical model of the sarcomere in which titin molecules with different contour lengths, corresponding to different isoforms, are held in a lattice. The net force response of aligned titin molecules is determined by the persistence length of the tandemly arranged, different WLC components of the individual molecules, the ratio of their overall contour lengths, and by domain unfolding events. Biased domain unfolding in mechanically selected constituent molecules may serve as a compensatory mechanism for contour- and persistence-length differences. Variation in the ratio and contour length of the component chains may provide mechanisms for the fine-tuning of the sarcomeric passive force response.     

The use of atomic force microscopy for estimating morphometric characteristics of blood cell

The potential of atomic force microscopy for estimating geometric characteristics of blood cells is demonstrated. Comparison of hemocyte morphometric characteristics recorded using different scanning modes has demonstrated that noncontact and semicontact imaging are adequate for studying the size and geometry of biological objects. A contact scanning of cells leads to their irreversible deformation.     

Chitosan nanoparticles as non-viral gene delivery vehicles based on atomic force microscopy study

Chitosan （CS）, a biocompatible and biodegradable material, can act as a non-viral delivery vehicle with low toxicity. In this study, plasmid DNA （pDNA） and siRNA were encapsulated in CS nanoparticles （NPs） to prepare CS-DNA and CS-siRNA NPs using a complex coacervation process. The CS-DNA particle size was within the range of 180-370 nm with a surface charge ranging from 0 to 18 mV at pH 5.5. The stability of pDNA in CS-DNA was investigated by pDNA release study and DNase I protection assay. The release of pDNA from NPs was studied in pH 7.4 phosphatebuffered saline at 37℃ and the CS-DNA NPs could delay the DNA release. Results of DNase I protection assay showed that CS-DNA NPs could protect the encapsulated pDNA from nuclease degradation. In the transfection study, it was found that the transfection efficiency in vitro was dependent on the molecular weight, charge ratio, and DNA concentration of the CS-DNA NP as well as the type of cell transfected. Moreover, the morphology of HeLa cells transfected with CS-siRNA complexes was studied using atomic force microscopy. The results suggest that CS may be more capable than liposome in delivering siRNA to target cells. In summary, our analysis suggests that pDNA and siRNA can be encapsulated in CS NPs without being damaged.     

High-resolution atomic force microscopy of soluble Abeta42 oligomers

Soluble oligomers and protofibrils are widely thought to be the toxic forms of the Abeta42 peptide associated with Alzheimer's disease. We have investigated the structure and formation of these assemblies using a new approach in atomic force microscopy (AFM) that yields high-resolution images of hydrated proteins and allows the structure of the smallest molecular weight (MW) oligomers to be observed and characterized. AFM images of monomers, dimers and other low MW oligomers at early incubation times (< 1h) are consistent with a hairpin structure for the monomeric Abeta42 peptide. The low MW oligomers are relatively compact and have significant order. The most constant dimension of these oligomers is their height (approximately 1-3 nm) above the mica surface; their lateral dimensions (width and length) vary between 5 nm and 10nm. Flat nascent protofibrils with lengths of over 40 nm are observed at short incubation times (< or = 3h); their lateral dimensions of 6-8 nm are consistent with a mass-per-length of 9 kDa/nm previously predicted for the elementary fibril subunit. High MW oligomers with lateral dimensions of 15-25 nm and heights ranging from 2-8 nm are common at high concentrations of Abeta. We show that an inhibitor designed to block the sheet-to-sheet packing in Abeta fibrils is able to cap the heights of these oligomers at approximately 4 nm. The observation of fine structure in the high MW oligomers suggests that they are able to nucleate fibril formation. AFM images obtained as a function of incubation time reveal a sequence of assembly from monomers to soluble oligomers and protofibrils.