PEVK domain of titin: an entropic spring with actin-binding properties

The PEVK domain of the giant muscle protein titin is a proline-rich sequence with unknown secondary/tertiary structure. Here we compared the force-extension behavior of cloned cardiac PEVK titin measured by single-molecule atomic force spectroscopy with the extensibility of the PEVK domain measured in intact cardiac muscle sarcomeres. The analysis revealed that cardiac PEVK titin acts as an entropic spring with the properties of a random coil exhibiting mechanical conformations of different flexibility. Since in situ, titin is in close proximity to the thin filaments, we also studied whether the PEVK domain of cardiac or skeletal titin may interact with actin filaments. Interaction was indeed found in the in vitro motility assay, in which recombinant PEVK titin constructs slowed down the sliding velocity of actin filaments over myosin. Skeletal PEVK titin affected the actin sliding to a lesser degree than cardiac PEVK titin. The cardiac PEVK effect was partially suppressed by physiological Ca(2+) concentrations, whereas the skeletal PEVK effect was independent of [Ca(2+)]. Cosedimentation assays confirmed the Ca(2+)-modulated actin-binding propensity of cardiac PEVK titin, but did not detect interaction between actin and skeletal PEVK titin. In myofibrils, the relatively weak actin-PEVK interaction gives rise to a viscous force component opposing filament sliding. Thus, the PEVK domain contributes not only to the extensibility of the sarcomere, but also affects contractile properties.     

Titin organisation and the 3D architecture of the vertebrate-striated muscle I-band

The giant muscle protein titin (connectin) is known to serve as a cytoskeletal element in muscle sarcomeres. It elastically restrains lengthening sarcomeres, it aids the integrity and central positioning of the A-band in the sarcomere and it may act as a template upon which some sarcomeric components are laid down during myogenesis. A puzzle has been how titin molecules, arranged systematically within the hexagonal A-band lattice of myosin filaments, can redistribute through the I-band to their anchoring sites in the tetragonal Z-band lattice. Recent work by Liversage and colleagues has suggested that there are six titin molecules per half myosin filament. Since there are two actin filaments per half myosin filament in a half sarcomere, this means that there are three titin molecules interacting with each Z-band unit cell containing one actin filament in the same sarcomere and one of opposite polarity from the next sarcomere. Liversage et al. suggested that the three titins might be distributed with two on an actin filament of one polarity and one on the filament of opposite polarity. Here, we build on this suggestion and discuss the transition of titin from the A-band to the Z-band. We show that there are good structural and mechanical reasons why titin might be organised as Liversage et al., suggested and we discuss the possible relationships between A-band arrangements in successive sarcomeres along a myofibril.     

The Three Filament Model of Skeletal Muscle Stability and Force Production

Ever since the 1950s, muscle force regulation has been associated with the cross-bridge interactions between the two contractile filaments, actin and myosin. This gave rise to what is referred to as the "two-filament sarcomere model". This model does not predict eccentric muscle contractions well, produces instability of myosin alignment and force production on the descending limb of the force-length relationship, and cannot account for the vastly decreased ATP requirements of actively stretched muscles. Over the past decade, we and others, identified that a third myofilament, titin, plays an important role in stabilizing the sarcomere and the myosin filament. Here, we demonstrate additionally how titin is an active participant in muscle force regulation by changing its stiffness in an activation/force dependent manner and by binding to actin, thereby adjusting its free spring length. Therefore, we propose that skeletal muscle force regulation is based on a three filament model that includes titin, rather than a two filament model consisting only of actin and myosin filaments.     

Thin filament length regulation in striated muscle sarcomeres: pointed-end dynamics go beyond a nebulin ruler

The actin (thin) filaments in striated muscle are highly regulated and precisely specified in length to optimally overlap with the myosin (thick) filaments for efficient myofibril contraction. Here, we review and critically discuss recent evidence for how thin filament lengths are controlled in vertebrate skeletal, vertebrate cardiac, and invertebrate (arthropod) sarcomeres. Regulation of actin polymerization dynamics at the slow-growing (pointed) ends by the capping protein tropomodulin provides a unified explanation for how thin filament lengths are physiologically optimized in all three muscle types. Nebulin, a large protein thought to specify thin filament lengths in vertebrate skeletal muscle through a ruler mechanism, may not control pointed-end actin dynamics directly, but instead may stabilize a large core region of the thin filament. We suggest that this stabilizing function for nebulin modifies the lengths primarily specified by pointed-end actin dynamics to generate uniform filament lengths in vertebrate skeletal muscle. We suggest that nebulette, a small homolog of nebulin, may stabilize a correspondingly shorter core region and allow individual thin filament lengths to vary according to working sarcomere lengths in vertebrate cardiac muscle. We present a unified model for thin filament length regulation where these two mechanisms cooperate to tailor thin filament lengths for specific contractile environments in diverse muscles.     

IMMUNOHISTOCHEMICAL LOCALIZATION OF CONTRACTILE PROTEINS IN LIMULUS STRIATED MUSCLE

Limulus paramyosin and myosin were localized in the A bands of glycerinated Limulus striated muscle by the indirect horseradish peroxidase-labeled antibody and direct and indirect fluorescent antibody techniques. Localization of each protein in the A band varied with sarcomere length. Antiparamyosin was bound at the lateral margins of the A bands in long (~ 10.0 µ) and intermediate (~ 7.0 µ) length sarcomeres, and also in a thin line in the central A bands of sarcomeres, 7.0–~6.0 µ. Antiparamyosin stained the entire A bands of short sarcomeres (<6.0). Conversely, antimyosin stained the entire A bands of long sarcomeres, showed decreased intensity of central A band staining except for a thin medial line in intermediate length sarcomeres, and was bound only in the lateral A bands of short sarcomeres. These results are consistent with a model in which paramyosin comprises the core of the thick filament and myosin forms a cortex. Differential staining observed using antiparamyosin and antimyosin at various sarcomere lengths and changes in A band lengths reflect the extent of thick-thin filament interaction and conformational change in the thick filament during sarcomeric shortening.     

Fine Structure of Cardiac Sarcomeres in the Black Widow Spider Latrodectus mactans

Fine structural characteristics of the cardiac muscle and its sarcomere organization in the black widow spider, Latrodectus mactans were examined using transmission electron microscopy. The arrangement of cardiac muscle fibers was quite similar to that of skeletal muscle fibers, but they branched off at the ends and formed multiple connections with adjacent cells. Each cell contained multiple myofibrils and an extensive dyadic sarcotubular system consisting of sarcoplasmic reticulum and T‐tubules. Thin and thick myofilaments were highly organized in regular repetitive arrays and formed contractile sarcomeres. Each repeating band unit of the sarcomere had three apparent striations, but the H‐zone and M‐lines were not prominent. Myofilaments were arranged into distinct sarcomeres defined by adjacent Z‐lines with relatively short lengths of 2.0 μm to 3.3 μm. Cross sections of the A‐band showed hexagon‐like arrangement of thick filaments, but the orbit of thin filaments around each thick filament was different from that seen in other vertebrates. Although each thick filament was surrounded by 12 thin filaments, the filament ratio of thin and thick myofilaments varied from 3:1 to 5:1 because thin filaments were shared by adjacent thick filaments.     

Evidence for the oligomeric state of 'elastic' titin in muscle sarcomeres

The giant protein titin has important roles in muscle sarcomere integrity, elasticity and contractile activity. The key role in elasticity was highlighted in recent years by single-molecule mechanical studies, which showed a direct relationship between the non-uniform structure of titin and the hierarchical mechanism of its force-extension behavior. Further advances in understanding mechanisms controlling sarcomere structure and elasticity require detailed knowledge of titin arrangement and interactions in situ. Here we present data on the structure and self-interactive properties of an ∼ 290 kDa (∼ 100 nm long) tryptic fragment from the I-band part of titin that is extensible in situ. The fragment includes the conserved ‘distal’ tandem Ig segment of the molecule and forms side-by-side oligomers with distinctive 4 nm cross-striations. Comparisons between these oligomers and the end filaments seen at the tips of native thick filaments indicate identical structure. This shows that end-filaments are formed by the elastic parts of six titin molecules connecting each end of the thick filament to the Z-line. Self-association of elastic titin into stiff end-filaments adds a further hierarchical level in the mechanism of titin extensibility in muscle cells. Self-association of this part of titin may be required to prevent interference of the individual flexible molecules with myosin cross-bridges interacting with actin.     

Elastic filaments in situ in cardiac muscle: deep-etch replica analysis in combination with selective removal of actin and myosin filaments

To clarify the full picture of the connectin (titin) filament network in situ, we selectively removed actin and myosin filaments from cardiac muscle fibers by gelsolin and potassium acetate treatment, respectively, and observed the residual elastic filament network by deep-etch replica electron microscopy. In the A bands, elastic filaments of uniform diameter (6-7 nm) projecting from the M line ran parallel, and extended into the I bands. At the junction line in the I bands, which may correspond to the N2 line in skeletal muscle, individual elastic filaments branched into two or more thinner strands, which repeatedly joined and branched to reach the Z line. Considering that cardiac muscle lacks nebulin, it is very likely that these elastic filaments were composed predominantly of connectin molecules; indeed, anti-connectin monoclonal antibody specifically stained these elastic filaments. Further, striations of approximately 4 nm, characteristic of isolated connectin molecules, were also observed in the elastic filaments. Taking recent analyses of the structure of isolated connectin molecules into consideration, we concluded that individual connectin molecules stretched between the M and Z lines and that each elastic filament consisted of laterally-associated connectin molecules. Close comparison of these images with the replica images of intact and S1-decorated sarcomeres led us to conclude that, in intact sarcomeres, the elastic filaments were laterally associated with myosin and actin filaments in the A and I bands, respectively. Interestingly, it was shown that the elastic property of connectin filaments was not restricted by their lateral association with actin filaments in intact sarcomeres. Finally, we have proposed a new structural model of the cardiac muscle sarcomere that includes connectin filaments.     

The M-band: an elastic web that crosslinks thick filaments in the center of the sarcomere

The sarcomere of striated muscle is an efficient molecular machine, characterized by perfect structural organization of contractile filaments. This order is ensured by the sarcomere cytoskeleton, an important element of which is the M-band, believed to maintain the thick filament lattice. We review here recent progress in understanding the M-band function and its structural organization. We explain how the M-band might reduce the intrinsic instability of thick filaments and help titin to maintain order in the sarcomeres. The M-band molecular structure has been clarified recently by biochemical and biophysical approaches that focused on the properties of the prominent M-band component myomesin. These have shown that antiparallel myomesin dimers might link the thick filaments in the M-band, a role analogous to that of alpha-actinin in the Z-disc. Furthermore, similar to titin, myomesin is a molecular spring with complex visco-elastic properties that can be modified by alternative splicing. M-band protein composition correlates with the expression of titin isoforms and appears to be a reliable marker for biomechanical conditions in contracting muscle. We propose that the M-band is in fact a dynamic structure that monitors the stress appearing in the thick filament lattice during contraction and quickly reorganizes to meet new physiological requirements.     

Flightin is essential for thick filament assembly and sarcomere stability in Drosophila flight muscles

Flightin is a multiply phosphorylated, 20-kD myofibrillar protein found in Drosophila indirect flight muscles (IFM). Previous work suggests that flightin plays an essential, as yet undefined, role in normal sarcomere structure and contractile activity. Here we show that flightin is associated with thick filaments where it is likely to interact with the myosin rod. We have created a null mutation for flightin, fln(0), that results in loss of flight ability but has no effect on fecundity or viability. Electron microscopy comparing pupa and adult fln(0) IFM shows that sarcomeres, and thick and thin filaments in pupal IFM, are 25-30% longer than in wild type. fln(0) fibers are abnormally wavy, but sarcomere and myotendon structure in pupa are otherwise normal. Within the first 5 h of adult life and beginning of contractile activity, IFM fibers become disrupted as thick filaments and sarcomeres are variably shortened, and myofibrils are ruptured at the myotendon junction. Unusual empty pockets and granular material interrupt the filament lattice of adult fln(0) sarcomeres. Site-specific cleavage of myosin heavy chain occurs during this period. That myosin is cleaved in the absence of flightin is consistent with the immunolocalization of flightin on the thick filament and biochemical and genetic evidence suggesting it is associated with the myosin rod. Our results indicate that flightin is required for the establishment of normal thick filament length during late pupal development and thick filament stability in adult after initiation of contractile activity.     

Passive tension in cardiac muscle: contribution of collagen, titin, microtubules, and intermediate filaments.

The passive tension-sarcomere length relation of rat cardiac muscle was investigated by studying passive (or not activated) single myocytes and trabeculae. The contribution of collagen, titin, microtubules, and intermediate filaments to tension and stiffness was investigated by measuring (1) the effects of KCl/KI extraction on both trabeculae and single myocytes, (2) the effect of trypsin digestion on single myocytes, and (3) the effect of colchicine on single myocytes. It was found that over the working range of sarcomeres in the heart (lengths approximately 1.9-2.2 microns), collagen and titin are the most important contributors to passive tension with titin dominating at the shorter end of the working range and collagen at longer lengths. Microtubules made a modest contribution to passive tension in some cells, but on average their contribution was not significant. Finally, intermediate filaments contributed about 10% to passive tension of trabeculae at sarcomere lengths from approximately 1.9 to 2.1 microns, and their contribution dropped to only a few percent at longer lengths. At physiological sarcomere lengths of the heart, cardiac titin developed much higher tensions (> 20-fold) than did skeletal muscle titin at comparable lengths. This might be related to the finding that cardiac titin has a molecular mass of 2.5 MDa, 0.3-0.5 MDa smaller than titin of mammalian skeletal muscle, which is predicted to result in a much shorter extensible titin segment in the I-band of cardiac muscle. Passive stress plotted versus the strain of the extensible titin segment showed that the stress-strain relationships are similar in cardiac and skeletal muscle. The difference in passive stress between cardiac and skeletal muscle at the sarcomere level predominantly resulted from much higher strains of the I-segment of cardiac titin at a given sarcomere length. By expressing a smaller titin isoform, without changing the properties of the molecule itself, cardiac muscle is able to develop significant levels of passive tension at physiological sarcomere lengths.     

The titin N2B and N2A regions: biomechanical and metabolic signaling hubs in cross-striated muscles

Muscle specific signaling has been shown to originate from myofilaments and their associated cellular structures, including the sarcomeres, costameres or the cardiac intercalated disc. Two signaling hubs that play important biomechanical roles for cardiac and/or skeletal muscle physiology are the N2B and N2A regions in the giant protein titin. Prominent proteins associated with these regions in titin are chaperones Hsp90 and αB-crystallin, members of the four-and-a-half LIM (FHL) and muscle ankyrin repeat protein (Ankrd) families, as well as thin filament-associated proteins, such as myopalladin. This review highlights biological roles and properties of the titin N2B and N2A regions in health and disease. Special emphasis is placed on functions of Ankrd and FHL proteins as mechanosensors that modulate muscle-specific signaling and muscle growth. This region of the sarcomere also emerged as a hotspot for the modulation of passive muscle mechanics through altered titin phosphorylation and splicing, as well as tethering mechanisms that link titin to the thin filament system.     

Electron Microscopic Studies of Skeletal and Cardiac Muscle of a Benthic Fish. I. Myofibrillar Structure in Resting and Contracted Muscle

SYNOPSIS. Electron microscopic studies are reported on glycerinatedskeletal and cardiac muscle of a benthic fish, Coryphaenoidesspecies. In white skeletal muscle, the sarcomeres have a restinglength of approximately 1.8 µ, with thick filaments 1.4µ and thin filaments 0.75 µ in length. These dimensionsare somewhat shorter than filament lengths of oilier vertebratemuscles, possibly due to the elfect of volume increase duringassembly of thick and thin filaments at high hydrostatic pressure.During ATP-induced contraction of Coryphaenoides muscle fromsarcomere lengths of 1.8 µ to 1.6 µ, there is acharacteristic interdigitation of thick and thin filaments,with decrease in I band length and no change in length of thickor thin filaments. However, in sarcomeres contracted to lengthsof 1.5 µ. to 1.2 µ, there is a slight shorteningof the A band, apparently due to shortening of thick filaments,that occurs despite the presence of residual I band in the samesarcomeres. There is no obvious crumpling or distortion of thickfilaments during contraction to sarcomere lengths as low as1.0 µ, but filament organization undergoes extensive disarrayat sarcomere lengths approaching 0.7 µ. Although effectsfrom heterogeneity of filament length cannot be excluded withcertainty, the present evidence does suggest that contractionot Coryphaenoides muscle from 1.6 µ to 1.0 µ sarcomerelengih is accompanied by shortening of thick filaments consequentto a structural change within the thick filament core.     

A Nebulin Ruler Does Not Dictate Thin Filament Lengths

To generate force, striated muscle requires overlap between uniform-length actin and myosin filaments. The hypothesis that a nebulin ruler mechanism specifies thin filament lengths by targeting where tropomodulin (Tmod) caps the slow-growing, pointed end has not been rigorously tested. Using fluorescent microscopy and quantitative image analysis, we found that nebulin extended 1.01-1.03 μm from the Z-line, but Tmod localized 1.13-1.31 μm from the Z-line, in seven different rabbit skeletal muscles. Because nebulin does not extend to the thin filament pointed ends, it can neither target Tmod capping nor specify thin filament lengths. We found instead a strong correspondence between thin filament lengths and titin isoform sizes for each muscle. Our results suggest the existence of a mechanism whereby nebulin specifies the minimum thin filament length and sarcomere length regulates and coordinates pointed-end dynamics to maintain the relative overlap of the thin and thick filaments during myofibril assembly.     

The multiple roles of titin in muscle contraction and force production

Titin is a filamentous protein spanning the half-sarcomere, with spring-like properties in the I-band region. Various structural, signaling, and mechanical functions have been associated with titin, but not all of these are fully elucidated and accepted in the scientific community. Here, I discuss the primary mechanical functions of titin, including its accepted role in passive force production, stabilization of half-sarcomeres and sarcomeres, and its controversial contribution to residual force enhancement, passive force enhancement, energetics, and work production in shortening muscle. Finally, I provide evidence that titin is a molecular spring whose stiffness changes with muscle activation and actin–myosin-based force production, suggesting a novel model of force production that, aside from actin and myosin, includes titin as a “third contractile” filament. Using this three-filament model of sarcomeres, the stability of (half-) sarcomeres, passive force enhancement, residual force enhancement, and the decrease in metabolic energy during and following eccentric contractions can be explained readily.     

Characterization of the myosin-based source for second-harmonic generation from muscle sarcomeres

Several biologically important protein structures give rise to strong second-harmonic generation (SHG) in their native context. In addition to high-contrast optical sections of cells and tissues, SHG imaging can provide detailed structural information based on the physical constraints of the optical effect. In this study we characterize, by biochemical and optical analysis, the critical structures underlying SHG from the complex muscle sarcomere. SHG emission arises from domains of the sarcomere containing thick filaments, even within nascent sarcomeres of differentiating myocytes. SHG from isolated myofibrils is abolished by extraction of myosin, but is unaffected by removal or addition of actin filaments. Furthermore, the polarization dependence of sarcomeric SHG is not affected by either the proportion of myosin head domains or the orientation of myosin heads. By fitting SHG polarization anisotropy readings to theoretical response curves, we find an orientation for the elemental harmonophore that corresponds well to the pitch of the myosin rod alpha-helix along the thick filament axis. Taken together, these data indicate that myosin rod domains are the key structures giving SHG from striated muscle. This study should guide the interpretation of SHG contrast in images of cardiac and skeletal muscle tissue for a variety of biomedical applications.     

Passive force generation and titin isoforms in mammalian skeletal muscle.

When relaxed striated muscle cells are stretched, a resting tension is produced which is thought to arise from stretching long, elastic filaments composed of titin (also called connectin). Here, I show that single skinned rabbit soleus muscle fibers produce resting tension that is several-fold lower than that found in rabbit psoas fibers. At sarcomere lengths where the slope of the resting tension-sarcomere length relation is low, electron microscopy of skinned fibers indicates that thick filaments move from the center to the side of the sarcomere during prolonged activation. As sarcomeres are stretched and the resting tension sarcomere length relation becomes steeper, this movement is decreased. The sarcomere length range over which thick filament movement decreases is higher in soleus than in psoas fibers, paralleling the different lengths at which the slope of the resting tension-sarcomere length relations increase. These results indicate that the large differences in resting tension between single psoas and soleus fibers are due to different tensions exerted by the elastic elements linking the end of each thick filament to the nearest Z-disc, i.e., the titin filaments. Quantitative gel electrophoresis of proteins from single muscle fibers excludes the possibility that resting tension is less in soleus than in psoas fibers simply because they have fewer titin filaments. A small difference in the electrophoretic mobility of titin between psoas and soleus fibers suggests the alternate possibility that mammalian muscle cells use at least two titin isoforms with differing elastic properties to produce variations in resting tension.     

Proposed role of the M-band in sarcomere mechanics and mechano-sensing: a model study

In sarcomeres of striated muscles the middle parts of adjacent thick filaments are connected to each other by the M-band proteins. To understand the role of the M-band in sarcomere mechanics a model of forces which pull a thick filament to opposite Z-disks of a sarcomere is considered. Forces of actin-myosin cross-bridges, I-band titin segments and the M-band are accounted for. A continual expression for the M-band force is obtained assuming that the M-band proteins which connect neighbor thick filaments have nonlinear elastic properties. On the ascending and descending limbs of the force-length diagram cross-bridge forces tend to destabilize sarcomere while titin tries to restore its symmetric configuration. When destabilizing cross-bridge force exceeds a critical limit, symmetric configuration of a sarcomere becomes unstable and the M-band buckles. Stiffness of the M-band increases stability only if the M-band is anchored to the extra-sarcomere cytoskeleton. Realistic magnitudes of the M-band buckling require that the M-band proteins have essentially nonlinear elasticity. The buckling may explain the M-band bending and axial misalignment of the thick filaments observed in contracting muscle. We hypothesize that the buckling stretches the titin protein kinase domain localized in the M-band being the signal for mechanical control of gene expression and protein turnover in striated muscle.     

Studies on cardiac myofibrillogenesis with antibodies to titin, actin, tropomyosin, and myosin

Cardiac myofibrillogenesis was examined in cultured chick cardiac cells by immunofluorescence using antibodies against titin, actin, tropomyosin, and myosin. Primitive cardiomyocytes initially contained stress fiber-like structures (SFLS) that stained positively for alpha actin and/or muscle tropomyosin. In some cases the staining for muscle tropomyosin and alpha actin was disproportionate; this suggests that the synthesis and/or assembly of these two isoforms into the SFLS may not be stoichiometric. The alpha actin containing SFLS in these myocytes could be classified as either central or peripheral; central SFLS showed developing sarcomeric titin while peripheral SFLS had weak titin fluorescence and a more uniform stain distribution. Sarcomeric patterns of titin and myosin were present at multiple sites on these structures. A pair of titin staining bands was clearly associated with each developing A band even at the two or three sarcomere stage, although occasional examples of a titin band being associated with a half sarcomere were noted. The appearance of sarcomeric titin patterns coincided or preceded sarcomere periodicity of either alpha actin or muscle tropomyosin. The early appearance of titin in myofibrillogenesis suggests it may have a role in filament alignment during sarcomere assembly.     

Calcium-dependent inhibition of in vitro thin-filament motility by native titin

Titin (also known as connectin) is a giant filamentous protein that spans the distance between the Z- and M-lines of the vertebrate muscle sarcomere and plays a fundamental role in the generation of passive tension. Titin has been shown to bind strongly to myosin, making it tightly associated to the thick filament in the sarcomere. Recent observations have suggested the possibility that titin also interacts with actin, implying further functions of titin in muscle contraction. We show — using in vitro motility and binding assays — that native titin interacts with both filamentous actin and reconstituted thin filaments. The interaction results in the inhibition of the filaments' in vitro motility. Furthermore, the titin-thin filament interaction occurs in a calcium-dependent manner: increased calcium results in enhanced binding of thin filaments to titin and greater suppression of in vitro motility.