Electrophoresis using ultra-high voltages

Optimization of electrophoretic techniques is becoming an increasingly important area of research as microdevices are now routinely adapted for numerous biology and engineering applications. The present work seeks to optimize electrophoresis within microdevices by utilizing ultra-high voltages to increase sample concentration prior to separation. By imaging fluorescently-tagged DNA samples, the effects of both conventional and atypical voltage protocols on DNA migration and separation are readily observed. Experiments illustrate that short periods of high voltage during electrophoretic injection do not destroy the quality of DNA separations, and in fact can enhance sample concentration five-fold. This study presents data that illustrate increases in average resolution, and resolution of longer fragments, obtained from electrophoretic injections utilizing voltages between 85 and 850 V/cm.     

Biocompatible controlled release polymers for delivery of polypeptides and growth factors

The development of biocompatible, controlled release systems for macromolecules has provided the opportunity for researchers and clinicians to target and deliver, on site, biologically active factors. This advance has also facilitated the purification and characterization of a number of important biomolecules. These systems include controlled release delivery systems which release proteins through porous polymer matrices, degradable polymeric delivery systems, and modulated polymer release systems. These areas of research will be reviewed with regards to their design, release kinetics, and biocompatibilities. The utilization of these systems to release such biologically important polypeptides as growth factors (e.g., fibroblast growth factor, epidermal growth factor, transforming growth factor-B) as well as a number of important inhibitory factors (e.g., nitrosoureas, angiogenesis inhibitors) in both in vivo and in vitro studies will be discussed.     

RNA structure: experimental analysis

Among all of the biological macromolecules, the functional versatility of RNAs is unique including encoding or transferring genetic information and performing catalysis. These biological functions are highly dependent upon RNA folding and structure. Since the discovery of catalytic RNAs in the early 1980s, a recent breakthrough came from the identification of a wealth of micro RNAs, small interfering RNAs and regulatory RNAs, all involved in modulation of gene expression. The structure of these novel RNAs, either free or in complex with specific ligands, can be analyzed using various experimental strategies, including X-ray crystallography, cryo-electron microscopy, nuclear magnetic resonance spectroscopy, structure-specific probes, with some that can be used in living cells, RNA engineering, thermal denaturation and mass spectrometry. Among these, X-ray crystallography has recently enabled determination of the structures of several large and complex RNAs, as well as of ribonucleoprotein complexes. The database of RNA structure has grown tremendously since the recent crystal structure analyses of the prokaryotic ribosome and its subunits. These methods are now widely applied to a variety of biologically relevant RNAs.     

Protecting endangered species: do the main legislative tools work?

It is critical to assess the effectiveness of the tools used to protect endangered species. The main tools enabled under the U.S. Endangered Species Act (ESA) to promote species recovery are funding, recovery plan development and critical habitat designation. Earlier studies sometimes found that statistically significant effects of these tools could be detected, but they have not answered the question of whether the effects were large enough to be biologically meaningful. Here, we ask: how much does the recovery status of ESA-listed species improve with the application of these tools? We used species' staus reports to Congress from 1988 to 2006 to quantify two measures of recovery for 1179 species. We related these to the amount of federal funding, years with a recovery plan, years with critical habitat designation, the amount of peer-reviewed scientific information, and time listed. We found that change in recovery status of listed species was, at best, only very weakly related to any of these tools. Recovery was positively related to the number of years listed, years with a recovery plan, and funding, however, these tools combined explain <13% of the variation in recovery status among species. Earlier studies that reported significant effects of these tools did not focus on effect sizes; however, they are in fact similarly small. One must conclude either that these tools are not very effective in promoting species' recovery, or (as we suspect) that species recovery data are so poor that it is impossible to tell whether the tools are effective or not. It is critically important to assess the effectiveness of tools used to promote species recovery; it is therefore also critically important to obtain population status data that are adequate to that task.     

DNA 测序技术领域的相关政府投入分析

DNA测序技术是遗传工程的核心技术之一,发展快速和低成本的基因测序技术成为研究焦点。美国、欧盟等发达国家和地区大力支持DNA测序技术的创新研究,并投入了大量的科研经费。在美国,国家卫生研究院(NIH)下属的国家人类基因组研究院(NHGRI)、美国能源部(DOE)以及美国科学基金委(NSF)等机构是进行DNA测序技术相关项目经费分配的主要政府部门。DNA测序作为生命科学研究的关键技术也是欧盟框架计划资助的重要内容之一,其以多个欧洲国家间合作以及产学研合作的形式开展。中国在DNA测序技术领域也开展了一些研究。     

Spin isomeric selectivity of water molecules upon DNA hydration

Four-photon coherent scattering of laser radiation was used to study the influence of DNA on the content of quasi-free ortho and para isomers of water molecules in its aqueous solution. It was shown that the concentration of quasi-free molecules that form the rotational spectrum of spin isomers increases considerably in the hydration shell of the DNA molecule as compared with pure water. The increase in the concentration of spin isomers occurs disproportionally. In the presence of DNA, the intensity of the rotational spectrum of ortho isomers is on the average much greater than that of para isomers. It was also demonstrated that the character of hydration and the ortho/para ratio change noticeably upon DNA denaturation, which may be evidence of changes in preferable solvation of DNA during its denaturation. The data obtained allowed us to assume that the stability of different biologically important states of macromolecules can be changed by varying the relative concentration of water spin isomers in solution.     

Microfluidic separation of DNA

DNA separation is important for numerous applications in biotechnology and medicine. Efforts to improve DNA separation in microdevices have led to advances in capillary electrophoresis and the development of novel separation strategies. Current research on microcapillary electrophoresis materials is focused on the development of separation matrices with low injection viscosities and wall-coating capabilities. Microcapillary injector geometries are being designed to allow increased control of sample plug volumes. Novel separation strategies using entropic traps, arrays of pillars and Brownian ratchets are also being developed.     

Generation of chromosomal DNA during alkaline lysis and removal by reverse micellar extraction

The separation of structurally related impurities from pharmaceutical plasmid DNA by highly scalable purification techniques is a challenge for biochemical engineering. Next to RNA, proteins, and lipopolysaccharides, the chromosomal DNA of the plasmid replicating host has to be removed. Here, we describe the application of reverse micellar extraction for the separation of chromosomal from plasmid DNA. By applying different procedures for alkaline lysis, bacterial lysates with different amounts of chromosomal DNA were generated. A reverse micellar extraction step enabled us to deplete the concentration of this impurity below the required level of 50 mg g⁻¹ of plasmid DNA with almost complete plasmid recovery.     

CRISPR with a Happy Ending: Non‐Templated DNA Repair for Prokaryotic Genome Engineering

The exploration of microbial metabolism is expected to support the development of a sustainable economy and tackle several problems related to the burdens of human consumption. Microorganisms have the potential to catalyze processes that are currently unavailable, unsustainable and/or inefficient. Their metabolism can be optimized and further expanded using tools like the clustered regularly interspaced short palindromic repeats and their associated proteins (CRISPR‐Cas) systems. These tools have revolutionized the field of biotechnology, as they greatly streamline the genetic engineering of organisms from all domains of life. CRISPR‐Cas and other nucleases mediate double‐strand DNA breaks, which must be repaired to prevent cell death. In prokaryotes, these breaks can be repaired through either homologous recombination, when a DNA repair template is available, or through template‐independent end joining, of which two major pathways are known. These end joining pathways depend on different sets of proteins and mediate DNA repair with different outcomes. Understanding these DNA repair pathways can be advantageous to steer the results of genome engineering experiments. In this review, we discuss different strategies for the genetic engineering of prokaryotes through either non‐homologous end joining (NHEJ) or alternative end joining (AEJ), both of which are independent of exogenous DNA repair templates.     

Micro and nanotechnological tools for study of RNA

Micro and nanotechnologies have originally contributed to engineering, especially in electronics. These technologies enable fabrication and assembly of materials at micrometer and nanometer scales and the manipulation of nano-objects. The power of these technologies has now been exploited in analyzes of biologically relevant molecules. In this review, the use of micro and nanotechnological tools in RNA research is described.     

Precipitation of filamentous bacteriophages for their selective recovery in primary purification

Filamentous bacteriophages and their derivatives are showing great promise as a whole new class of industrial agents, such as biologically based nano-materials and viral vectors. This raises challenges for their large-scale manufacture, principally due to the lack of bioprocessing knowledge. This article addresses what will be a potentially important option in the primary purification of the bacteriophages. Polyethylene glycol (PEG)-salt dual precipitants, calcium ions, spermidine, and isoelectric precipitation were first examined for their potential suitability for bacteriophage concentration under both pure and broth conditions. Successful precipitants were further studied on the basis of their selective purification ability from DNA and protein contaminants in a clarified broth system. Both PEG-based and isoelectric precipitations resulted in bacteriophage purity improvements, and PEG-based precipitations offered the highest selectivities. This work shows that precipitation of bacteriophages can be an effective primary purification step in a large-scale bioprocess.     

Generation and analysis of mesophilic variants of the thermostable archaeal I-DmoI homing endonuclease

The hyperthermophilic archaeon Desulfurococcus mobilis I-DmoI protein belongs to the family of proteins known as homing endonucleases (HEs). HEs are highly specific DNA-cleaving enzymes that recognize long stretches of DNA and are powerful tools for genome engineering. Because of its monomeric nature, I-DmoI is an ideal scaffold for generating mutant enzymes with novel DNA specificities, similarly reported for homodimeric HEs, but providing single chain endonucleases instead of dimers. However, this would require the use of a mesophilic variant cleaving its substrate at temperatures of 37 degrees C and below. We have generated mesophilic mutants of I-DmoI, using a single round of directed evolution that relies on a functional assay in yeast. The effect of mutations identified in the novel proteins has been investigated. These mutations are located distant to the DNA-binding site and cause changes in the size and polarity of buried residues, suggesting that they act by destabilizing the protein. Two of the novel proteins have been produced and analyzed in vitro. Their overall structures are similar to that of the parent protein, but they are destabilized against thermal and chemical denaturation. The temperature-dependent activity profiles for the mutants shifted toward lower temperatures with respect to the wild-type activity profile. However, the most destabilized mutant was not the most active at low temperatures, suggesting that other effects, like local structural distortions and/or changes in the protein dynamics, also influence their activity. These mesophilic I-DmoI mutants form the basis for generating new variants with tailored DNA specificities.     

Purification process monitoring in monoclonal antibody preparation: contamination with viruses, DNA and peptide growth factors.

Administration in vivo of monoclonal antibodies to humans is challenged by considerations regarding their safety. Contamination with viruses, potentially oncogenic nucleic acids and biologically active components like growth factors and hormones forms a serious point of concern in this respect. We have investigated the potential risk of viral contamination by measuring the reduction of 12 different viruses (after spiking) in the standard downstream purification process of ascitic fluid. Depending on the type of virus added and the purification step employed, the reduction of infectious virus particles varies considerably. The overall reduction ranges from about 10(3), observed for a member of the family of Papovaviridae, to more than 10(12) for members of the families of Herpesviridae and Orthomyxoviridae. Using hybridization analysis with a mouse (genomic) DNA probe, we show that the amount of residual DNA in ascitic fluids may also vary considerably, ranging from 75 ng/ml to 1 microgram/ml. In crude preparations produced in cell culture, much lower DNA concentrations are found (0.3 ng/ml). When standard downstream purification procedures are applied to ascitic fluid, a significant reduction of residual DNA levels is observed in the purified monoclonal antibody preparations and in intermediate fractions. The overall reduction factors vary from about 10(3) to 10(4), which is also confirmed by spiking experiments with either purified DNA or crude chromatin-like DNA. Using in-vitro cellular assays, we further show that peptide growth factors like PDGF and TGF beta are present in considerable amounts in ascitic fluids. The observed biological activities, however, are completely eliminated during the purification steps applied.     

Single-chain antibody fragments: Purification methodologies

At present, single-chain variable fragments (scFv) of antibodies are considered one of the most important tools in human therapies. Wide applications of antibodies are being exploited in different medical, pharmaceutical and research areas. These molecules maintain the same binding functionality that full length antibodies but possess several advantageous features as quickness to penetrate the tissues, easy manipulation, fast elimination of their immunocomplex and the possibility of being produced in simple expression systems like bacteria and yeast. The increasing demand in antibody based methodologies is driving advances in the production and purification of genetically engineered antibodies and antibody fragments. While advances in expression systems allow the production of high titers of antibodies, there exist some limits imposed by the downstream methodologies which are not efficient enough to ensure their industrialization.The main aim of this review is to highlight the principal characteristics of single-chain variable fragments of antibodies addressing advances and perspectives on scFv purification.     

Non-ionic hybrid detergents for protein delipidation

Non-ionic detergents are important tools for the investigation of interactions between membrane proteins and lipid membranes. Recent studies led to the question as to whether the ability to capture protein-lipid interactions depends on the properties of detergents or their concentration in purification buffers. To address this question, we present the synthesis of an asymmetric, hybrid detergent that combines the head groups of detergents with opposing delipidating properties. We discuss detergent properties and protein purification outcomes to reveal whether the properties of detergent micelles or the detergent concentration in purification buffers drive membrane protein delipidation. We anticipate that our findings will enable the development of rationally design detergents for future applications in membrane protein research.     

The use of capillary electrophoresis for DNA polymorphism analysis

Capillary electrophoresis has advanced enormously over the last 10 yr as a tool for DNA sequencing, driven by the human and other major genome projects and by the need for rapid electrophoresis-based DNA diagnostic tests. The common need of these analyses is a platform providing very high throughput, high-quality data, and low process costs. These demands have led to capillary electrophoresis machines with multiple capillaries providing highly parallel analyses, to new electrophoresis matrices, to highly sensitive spectrofluorometers, and to brighter, spectrally distinct fluorescent dyes with which to label DNA. Capillary devices have also been engineered onto microchip formats, on which both the amount of sample required for analysis and the speed of analysis are increased by an order of magnitude. This review examines the advances made in capillary and chip-based microdevices and in the different DNA-based assays developed for mutation detection and genotype analysis using capillary electrophoresis. The automation of attendant processes such as for DNA sample preparation, PCR, and analyte purification are also reviewed. Together, these technological developments provide the throughput demanded by the large genome-sequencing projects.     

CRISPR-Cas system: Toward a more efficient technology for genome editing and beyond

Genome engineering technology is of great interest for biomedical research that enables scientists to make specific manipulation in the DNA sequence. Early methods for introducing double-stranded DNA breaks relies on protein-based systems. These platforms have enabled fascinating advances, but all are costly and time-consuming to engineer, preventing these from gaining high-throughput applications. The CRISPR-Cas9 system, co-opted from bacteria, has generated considerable excitement in gene targeting. In this review, we describe gene targeting techniques with an emphasis on recent strategies to improve the specificities of CRISPR-Cas systems for nuclease and non-nuclease applications.     

Aggregation suppression of proteins by arginine during thermal unfolding

Arginine has been used to suppress aggregation of proteins during refolding and purification. We have further studied in this paper the aggregation-suppressive effects of arginine on two commercially important proteins, i.e., interleukine-6 (IL-6) and a monoclonal antibody (mAb). These proteins show extensive aggregation in aqueous buffers when subjected to thermal unfolding. Arginine suppresses aggregation concentration-dependently during thermal unfolding. However, this effect was not specific to arginine, as guanidine hydrochloride (GdnHCl) at identical concentrations also was effective. While equally effective in aggregation suppression during thermal unfolding, arginine and GdnHCl differed in their effects on the structure of the native proteins. Arginine showed no apparent adverse effects on the native protein, while GdnHCl induced conformational changes at room temperature, i.e., below the melting temperature. These additives affected the melting temperature of IL-6 as well; arginine increased it concentration-dependently, while GdnHCl increased it at low concentration but decreased at higher concentration. These results clearly demonstrate that arginine suppresses aggregation via different mechanism from that conferred by GdnHCl.