A simple and sensitive label‐free fluorescence sensing of heparin based on Cdte quantum dots

A rapid, simple and sensitive label‐free fluorescence method was developed for the determination of trace amounts of an important drug, heparin. This new method was based on water‐soluble glutathione‐capped CdTe quantum dots (CdTe QDs) as the luminescent probe. CdTe QDs were prepared according to the published protocol and the sizes of these nanoparticles were verified through transmission electron microscopy (TEM), X‐ray diffraction (XRD) and dynamic light scattering (DLS) with an average particle size of about 7 nm. The fluorescence intensity of glutathione‐capped CdTe QDs increased with increasing heparin concentration. These changes were followed as the analytical signal. Effective variables such as pH, QD concentration and incubation time were optimized. At the optimum conditions, with this optical method, heparin could be measured within the range 10.0–200.0 ng mL^?1 with a low limit of detection, 2.0 ng mL^?1. The constructed fluorescence sensor was also applied successfully for the determination of heparin in human serum. Copyright © 2015 John Wiley & Sons, Ltd.     

Fluorescence quenching investigation on the interaction of glutathione‐CdTe/CdS quantum dots with sanguinarine and its analytical application

Water‐soluble glutathione (GSH)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. In pH 5.4 sodium phosphate buffer medium, the interaction between GSH‐CdTe/CdS QDs and sanguinarine (SA) was investigated by spectroscopic methods, including fluorescence spectroscopy and ultraviolet‐visible absorption spectroscopy. Addition of SA to GSH‐CdTe/CdS QDs results in fluorescence quenching of GSH‐CdTe/CdS QDs. Quenching intensity was in proportion to the concentration of SA in a certain range. Investigation of the quenching mechanism, proved that the fluorescence quenching of GSH‐CdTe/CdS QDs by SA is a result of electron transfer. Based on the quenching of the fluorescence of GSH‐CdTe/CdS QDs by SA, a novel, simple, rapid and specific method for SA determination was proposed. The detection limit for SA was 3.4 ng/mL and the quantitative determination range was 0.2–40.0 µg/mL with a correlation coefficient of 0.9988. The method has been applied to the determination of SA in synthetic samples and fresh urine samples of healthy human with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Molecular spectroscopic studies on the interactions of rhein and emodin with thioglycolic acid‐capped core/shell CdTe/CdS quantum dots and their analytical applications

Water‐soluble thioglycolic acid (TGA)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. The interactions of rhein and emodin with TGA‐CdTe/CdS QDs were evaluated by fluorescence and ultraviolet‐visible absorption spectroscopy. Experimental results showed that the high fluorescence intensity of TGA‐CdTe/CdS QDs could be effectively quenched in the presence of rhein (or emodin) at 570 nm, which may have resulted from an electron transfer process from excited TGA‐CdTe/CdS QDs to rhein (or emodin). The quenching intensity was in proportion to the concentration of both rhein and emodin in a certain range. Under optimized conditions, the linear ranges of TGA‐CdTe/CdS QDs fluorescence intensity versus the concentration of rhein and emodin were 0.09650–60 µg/mL and 0.1175–70 µg/mL with a correlation coefficient of 0.9984 and 0.9965, respectively. The corresponding detection limits (3σ/S) of rhein and emodin were 28.9 and 35.2 ng/mL, respectively. This proposed method was applied to determine rhein and emodin in human urine samples successfully with remarkable advantages such as high sensitivity, short analysis time, low cost and easy operation. Based on this, a simple, rapid and highly sensitive method to determine rhein (or emodin) was proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

CdTe/ZnS quantum dots as fluorescent probes for ammonium determination

Novel CdTe/ZnS quantum dot (QD) probes based on the quenching effect were proposed for the simple, rapid, and specific determination of ammonium in aqueous solutions. The QDs were modified using 3‐mercaptopropionic acid, and the fluorescence responses of the CdTe/ZnS QD probes to ammonium were detected through regularity quenching. The quenching levels of the CdTe/ZnS QDs and ammonium concentration showed a good linear relationship between 4.0 × 10^?6 and 5.0 × 10^?4 mol/L; the detection limit was 3.0 × 10^?7 mol/L. Ammonium contents in synthetic explosion soil samples were measured to determine the practical applications of the QD probes and a probable quenching mechanism was described. Copyright © 2015 John Wiley & Sons, Ltd.     

Facile synthesis and photophysical characterization of luminescent CdTe quantum dots for Forster resonance energy transfer based immunosensing of staphylococcal enterotoxin B

Aqueous phase synthesis of CdTe quantum dots (QDs) with surface functionalization for bioconjugation remains the best approach for biosensing and bioimaging applications. We present a facile aqueous phase method to prepare CdTe QDs by adjusting precursor and ligand concentrations. CdTe QDs had photoluminescence quantum yield up to ≈33% with a narrow spectral distribution. The powder X‐ray diffraction profile elucidated characteristic broad peaks of zinc blende cubic CdTe nanoparticles with 2.5–3 nm average crystalline size having regular spherical morphology as revealed by transmission electron microscopy. Infra‐red spectroscopy confirmed disappearance of characteristic absorptions for –SH thiols inferring thiol coordinated CdTe nanoparticles. The effective molar concentration of 1 : 2.5 : 0.5 respectively for Cd²⁺/3‐mercaptopropionic acid/HTe^– at pH 9 ± 0.2 resulted in CdTe quantum dots of 2.2–3.06 nm having band gap in the range 2.74–2.26 eV respectively. Later, QD₅₂₃ and QD₆₀₁ were used for monitoring staphylococcal enterotoxin B (SEB; a bacterial superantigen responsible for food poisoning) using Forster resonance energy transfer based two QD fluorescence. QD₅₂₃ and QD₆₀₁ were bioconjugated to anti‐SEB IgY antibody and SEB respectively according to carbodiimide protocol. The mutual affinity between SEB and anti‐SEB antibody was relied upon to obtain efficient energy transfer between respective QDs resulting in fluorescence quenching of QD₅₂₃ and fluorescence enhancement of QD₆₀₁. Presence of SEB in the range 1–0.05 µg varied the rate of fluorescence quenching of QD₅₂₃, thereby demonstrating efficient use of QDs in the Forster resonance energy transfer based immunosensing method by engineering the QD size. Copyright © 2012 John Wiley & Sons, Ltd.     

The binding of oxidized and reduced nicotinamide–adenine dinucleotides to bovine liver uridine diphosphate glucose dehydrogenase

The binding of NAD(+) and NADH to bovine liver UDP-glucose dehydrogenase was studied by using gel-filtration and fluorescence-titration methods. The enzyme bound 0.5mol of NAD(+) and 2 mol of NADH/mol of subunit at saturating concentrations of both substrate and product. The dissociation constant for NADH was 4.3mum. The binding of NAD(+) to the enzyme resulted in a small quench of protein fluorescence whereas the binding of NADH resulted in a much larger (60-70%) quench of protein fluorescence. The binding of NADH to the enzyme was pH-dependent. At pH8.1 a biphasic profile was obtained on titrating the enzyme with NADH, whereas at pH8.8 the titration profile was hyperbolic. UDP-xylose, and to a lesser extent UDP-glucuronic acid, lowered the apparent affinity of the enzyme for NADH.     

Assembly of light‐emitting diode based on hydrophilic CdTe quantum dots incorporating dehydrated silica gel

Stable photoluminescence QD light‐emitting diodes (QD‐LEDs) were made based on hydrophilic CdTe quantum dots (QDs). A quantum dot‐inorganic nanocomposite (hydrophilic CdTe QDs incorporating dehydrated silica gel) was prepared by two methods (rotary evaporation and freeze drying). Taking advantage of its viscosity, plasticity and transparency, dehydrated silica gel could be coated on the surface of ultraviolet (UV) light LEDs to make photoluminescence QD‐LEDs. This new photoluminescence QD‐LED, which is stable, environmentally non‐toxic, easy to operate and low cost, could expand the applications of hydrophilic CdTe QDs in photoluminescence. Copyright © 2015 John Wiley & Sons, Ltd.     

Characterization and cancer cell targeted imaging properties of human antivascular endothelial growth factor monoclonal antibody conjugated CdTe/ZnS quantum dots

High luminescence quantum yield water‐soluble CdTe/ZnS core/shell quantum dots (QDs) stabilized with thioglycolic acid were synthesized. QDs were chemically coupled to fully humanized antivascular endothelial growth factor₁₆₅ monoclonal antibodies to produce fluorescent probes. These probes can be used to assay the biological affinity of the antibody. The properties of QDs conjugated to an antibody were characterized by ultraviolet and visible spectrophotometry, fluorescent spectrophotometry, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, transmission electron microscopy and fluorescence microscopy. Cell‐targeted imaging was performed in human breast cancer cell lines. The cytotoxicity of bare QDs and fluorescent probes was evaluated in the MCF‐7 cells with an MTT viability assay. The results proved that CdTe/ZnS QD–monoclonal antibody nanoprobes had been successfully prepared with excellent spectral properties in target detections. Surface modification by ZnS shell could mitigate the cytotoxicity of cadmium‐based QDs. The therapeutic effects of antivascular endothelial growth factor antibodies towards cultured human cancer cells were confirmed by MTT assay. Copyright © 2014 John Wiley & Sons, Ltd.     

Simultaneous detection of multiple chemical residues in milk using broad-specificity antibodies in a hybrid immunosorbent assay

In this study, a novel immunoassay using 2 types of sensors (QDs and an enzyme) were simultaneously used for detecting multiple structurally different molecules in milk. The method integrates the fluorescence-linked immunosorbent assay (FLISA) using QD605 and QD655 as probes and an enzyme-linked immunosorbent assay (ELISA) using horseradish peroxidase (HRP) labeled secondary antibody. The FLISA was produced by anti-sulfonamide and anti-quinolone broad-specificity monoclonal antibodies (MAbs) for simultaneously detecting 6 sulfonamides and 11 quinolones. Combined with the FLISA, an ELISA was utilized for detecting melamine from the same milk samples. The cross-reactivity of the MAbs was retained while binding the QDs by using avidin and a secondary antibody as bridges. Milk samples were detected using this hybrid immunoassay, with limits of detection (LOD) of the quinolones (0.18 ng mL(-1)), sulfonamides (0.17 ng mL(-1)) and melamine (7.5 ng mL(-1)), respectively. The results demonstrated that the detection limits of the integrated methods were better than required and simplified the sample pretreatment process. The developed immunoassay is suitable for high-throughput screening of low-molecular weight contaminants.     

Sensitive detection of sodium cromoglycate with glutathione‐capped CdTe quantum dots as a novel fluorescence probe

A sensitive and simple analytical strategy for the detection of sodium cromoglycate (SCG) has been established based on a readily detectable fluorescence quenching effect of SCG for glutathione‐capped (GSH‐capped) CdTe quantum dots (QDs). The fluorescence of GSH‐capped CdTe QDs could be efficiently quenched by SCG through electron transfer from GSH‐capped CdTe QDs to SCG. Under optimum conditions, the response was linearly proportional to the concentration of SCG between 0.6419 and 100 µg/mL, with a correlation coefficient (R) of 0.9964; the detection limit (3δ/K) was 0.1926 µg/mL. The optimum conditions and the influence of coexisting foreign substances on the reaction were also investigated. The very effective and simple method reported here has been successfully applied to the determination of SCG in synthetic and real samples. It is believed that the established approach could have good prospects for application in the fields of clinical diseases diagnosis and treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

Multi-Color Single Particle Tracking with Quantum Dots

Quantum dots (QDs) have long promised to revolutionize fluorescence detection to include even applications requiring simultaneous multi-species detection at single molecule sensitivity. Despite the early promise, the unique optical properties of QDs have not yet been fully exploited in e. g. multiplex single molecule sensitivity applications such as single particle tracking (SPT). In order to fully optimize single molecule multiplex application with QDs, we have in this work performed a comprehensive quantitative investigation of the fluorescence intensities, fluorescence intensity fluctuations, and hydrodynamic radii of eight types of commercially available water soluble QDs. In this study, we show that the fluorescence intensity of CdSe core QDs increases as the emission of the QDs shifts towards the red but that hybrid CdSe/CdTe core QDs are less bright than the furthest red-shifted CdSe QDs. We further show that there is only a small size advantage in using blue-shifted QDs in biological applications because of the additional size of the water-stabilizing surface coat. Extending previous work, we finally also show that parallel four color multicolor (MC)-SPT with QDs is possible at an image acquisition rate of at least 25 Hz. We demonstrate the technique by measuring the lateral dynamics of a lipid, biotin-cap-DPPE, in the cellular plasma membrane of live cells using four different colors of QDs; QD565, QD605, QD655, and QD705 as labels.     

Novel fluoroimmunoassays for detecting ochratoxin A using CdTe quantum dots

Novel direct and indirect competitive fluorescence‐linked immunosorbent assays (c FLISA and ic FLISA) for detection of ochratoxin A (OTA) were described using CdTe quantum dots (QDs) as fluorescent label. CdTe QDs were successfully synthesized, which had an emission wavelength of 615 nm. The high purity monoclonal antibody against OTA was prepared through cell thawing and the octylic acid‐ammonium sulfate method. The OTA MAbs were successfully coupled with CdTe QDs, and which also retained the original biological activity. The 50% inhibition values (IC₅₀) of the c FLISA and ic FLISA were 0.630 ng/mL, 0.234 ng/mL, the limits of detection (LOD) were 7.06 × 10^–3 and 4.15 × 10^–3 ng/mL, and detection ranges were 7.06 × 10^–3 ? 18.34 ng/mL and 4.15 × 10^–3 ? 4.88 ng/mL, in‐order. The recoveries were 96.0–104.7% along with coefficients of variation (CVs) below 10%. The FLISA provided novel method for determination of OTA and the potential of MAb–CdTe QDs for the establishment of fluorescent immunochromatographic test strip.

     

L‐Cysteine capped CdTe–CdS core–shell quantum dots: preparation,characterization and immuno‐labeling of HeLa cells

Functionalized CdTe–CdS core–shell quantum dots (QDs) were synthesized in aqueous solution via water‐bathing combined hydrothermal method using L‐cysteine (L‐Cys) as a stabilizer. This method possesses both the advantages of water‐bathing and hydrothermal methods for preparing high‐quality QDs with markedly reduced synthesis time, and better stability than a lone hydrothermal method. The QDs were characterized by transmission electronic microscopy and powder X‐ray diffraction and X‐ray photoelectron spectroscopy. The CdTe–CdS QDs with core–shell structure showed both enhanced fluorescence and better photo stability than nude CdTe QDs. After conjugating with antibody rabbit anti‐CEACAM8 (CD67), the as‐prepared l ‐Cys capped CdTe–CdS QDs were successfully used as fluorescent probes for the direct immuno‐labeling and imaging of HeLa cells. It was indicated that this kind of QD would have application potential in bio‐labeling and cell imaging. Copyright © 2009 John Wiley & Sons, Ltd.     

Spectroscopic investigations on the conformational changes of lysozyme effected by different sizes of N‐acetyl‐l‐cysteine‐capped CdTe quantum dots

The effect of N‐acetyl‐l ‐cysteine‐capped CdTe quantum dots (NAC‐CdTe QDs) with different sizes on lysozyme was investigated by isothermal titration calorimetry (ITC), enzyme activity assays, and multi‐spectroscopic methods. ITC results proved that NAC‐CdTe QDs can spontaneously bind with lysozyme and hydrophobic force plays a major role in stabilizing QDs–lysozyme complex. Multi‐spectroscopic measurements revealed that NAC‐CdTe QDs caused strong quenching of the lysozyme's fluorescence in a size‐dependent quenching manner. Moreover, the changes of secondary structure and microenvironment in lysozyme caused by the NAC‐CdTe QDs were higher with a bigger size. The results of enzyme activity assays showed that the interaction between lysozyme and NAC‐CdTe QDs inhibited the activity of lysozyme and the inhibiting effect was in a size‐dependent manner. Based on these results, we conclude that NAC‐CdTe QDs with larger particle size had a larger impact on the structure and function of lysozyme.     

Influence of the KBr matrix on the luminescence properties of CdTe quantum dots

The investigation of the luminescence properties of CdTe/KBr composites with encapsulated quantum dots (QDs) of different sizes was performed and the influence of the KBr matrix on the luminescence properties of CdTe QDs was studied. Encapsulation of nanoparticles by a solid matrix caused a bathochromic shift in the luminescence peak and the shift value was the larger the smaller the size of the quantum dots. Interband quantum transition theory was used to explain the influence of the matrix on the luminescence properties of the capsulated CdTe QDs. Theoretical calculations showed that the observed QD luminescence peak corresponded to a 1 s–1 s electronic transition, and its low‐energy shift after the transfer of QDs from dielectric water to the KBr matrix was due to a corresponding decrease in the depths of electrons and holes potential wells.     

Studying nanotoxic effects of CdTe quantum dots in Trypanosoma cruzi

Semiconductor nanoparticles, such as quantum dots (QDs), were used to carry out experiments in vivo and ex vivo with Trypanosoma cruzi. However, questions have been raised regarding the nanotoxicity of QDs in living cells, microorganisms, tissues and whole animals. The objective of this paper was to conduct a QD nanotoxicity study on living T. cruzi protozoa using analytical methods. This was accomplished using in vitro experiments to test the interference of the QDs on parasite development, morphology and viability. Our results show that after 72 h, a 200 μM cadmium telluride (CdTe) QD solution induced important morphological alterations in T. cruzi, such as DNA damage, plasma membrane blebbing and mitochondrial swelling. Flow cytometry assays showed no damage to the plasma membrane when incubated with 200 μM CdTe QDs for up to 72 h (propidium iodide cells), giving no evidence of classical necrosis. Parasites incubated with 2 μM CdTe QDs still proliferated after seven days. In summary, a low concentration of CdTe QDs (2 μM) is optimal for bioimaging, whereas a high concentration (200 μM CdTe) could be toxic to cells. Taken together, our data indicate that 2 μM QD can be used for the successful long-term study of the parasite-vector interaction in real time.     

A new nanoprobe based on FRET between functional quantum dots and gold nanoparticles for fluoride anion and its applications for biological imaging

A new nanoprobe was designed for the fluorescence imaging of fluoride anion (F(-)) in living cells with high sensitivity and selectivity. The design is based on the fluorescence resonance energy transfer (FRET) between CdTe quantum dots (CdTe QDs) and gold nanoparticles (AuNPs) through the formation of cyclic esters between phenylborinic acid and diol. In the presence of F(-), the boronate ester, a "hard acid", strongly reacts with F(-), a "hard base". Therefore, the boronate ester is converted to trifluoro borate, which causes the breakage of the linkage and disassembles CdTe QDs from AuNPs, resulting in the fluorescence recovery of the quenched CdTe QDs. The interaction mechanism was investigated by (19)FNMR on a model that was constructed by a small molecule and F(-). Quantum chemical calculations also testify the reactivity of boronate ester to F(-) and the sensing mechanism. Experimental results show that the increase in fluorescence intensity is proportional to the concentration of F(-) in the range of 5.0-45 μM. The detection limit and the relative standard deviation were 50 nM and 2.6%, respectively. Fluorescence imaging of F(-) in macrophages cells indicates good cell membrane penetration ability and low cytotoxicity of the nanoprobe, providing a viable alternative to detection of F(-) in biological or environmental samples.     

Ethanol exposure modulates hepatic S-adenosylmethionine and S-adenosylhomocysteine levels in the isolated perfused rat liver through changes in the redox state of the NADH/NAD(+) system

Methionine metabolism is disrupted in patients with alcoholic liver disease, resulting in altered hepatic concentrations of S-adenosylmethionine (SAM), S-adenosylhomocysteine (SAH), and other metabolites. The present study tested the hypothesis that reductive stress mediates the effects of ethanol on liver methionine metabolism. Isolated rat livers were perfused with ethanol or propanol to induce a reductive stress by increasing the NADH/NAD(+) ratio, and the concentrations of SAM and SAH in the liver tissue were determined by high-performance liquid chromatography. The increase in the NADH/NAD(+) ratio induced by ethanol or propanol was associated with a marked decrease in SAM and an increase in SAH liver content. 4-Methylpyrazole, an inhibitor the NAD(+)-dependent enzyme alcohol dehydrogenase, blocked the increase in the NADH/NAD(+) ratio and prevented the alterations in SAM and SAH. Similarly, co-infusion of pyruvate, which is metabolized by the NADH-dependent enzyme lactate dehydrogenase, restored the NADH/NAD(+) ratio and normalized SAM and SAH levels. The data establish an initial link between the effects of ethanol on the NADH/NAD(+) redox couple and the effects of ethanol on methionine metabolism in the liver.     

Temperature Driven Plasmon-Exciton Coupling in Thermoresponsive Dextran-Graft-PNIPAM/Au Nanoparticle/CdTe Quantum Dots Hybrid Nanosystem

The temperature-driven plasmon-exciton coupling in thermoresponsive dextran-graft-PNIPAM/Au nanoparticle/CdTe quantum dot (D-g-PNIPAM/Au NPs/CdTe QDs) hybrid nanosystem was studied. A significant (0.84 eV) splitting of the absorption peak was observed in the absorption spectrum of the nanosystem, which reflects the fact of formation of plexcitons, occurring due to strong plasmon-exciton coupling. An increasing with time plasmonic enhancement of the photoluminescence of CdTe QDs was revealed, as a result of the penetration of quantum dots into the volume of the D-g-PNIPAM/Au NP hybrid nanosystem and bonding to it. The heating–cooling cycle of the aqueous solution of the studied nanosystem leads to a reversible quenching-recovery alteration of the QD photoluminescence. The quenching was rationalized as a result of an increased probability of nonradiative resonance energy transfer (RET) from CdTe QDs to Au NPs, which occurs due to shortening of the NP-QD distance, caused by shrinking of the macromolecule due to cooling-induced lower critical solution temperature phase transition. Increasing the NP-QD distance in the heating stage recovers the QD PL intensity. The observed effect opens up opportunities for the controlled reversible temperature-driven tuning of the photoluminescence intensity of D-g-PNIPAM/Au NP/CdTe QD nanosystem, which is highly important for its potential use in photonics and biomedical applications.

     

Core–shell structured CdTe/CdS@SiO2@CdTe@SiO2 composite fluorescent spheres: Synthesis and application for Cd2+ detection

Core–shell structured quantum dot (QD)–silica fluorescent nanoparticles have attracted a great deal of attention due to the excellent optical properties of QDs and the stability of silica. In this study, core–shell structured CdTe/CdS@SiO₂@CdTe@SiO₂ fluorescent nanospheres were synthesized based on the Stöber method using multistep silica encapsulation. The second silica layer on the CdTe QDs maintained the optical stability of nanospheres and decreased adverse influences on the probe during subsequent processing. Red‐emissive CdTe/CdS QDs (630 nm) were used as a built‐in reference signal and green‐emissive CdTe QDs (550 nm) were used as a responding probe. The fluorescence of CdTe QDs was greatly quenched by added S^2?, owing to a S^2?‐induced change in the CdTe QDs surface state in the shell. Upon addition of Cd²⁺ to the S^2?‐quenched CdTe/CdS@SiO₂@CdTe@SiO₂ system, the responding signal at 550 nm was dramatically restored, whereas the emission at 630 nm remained almost unchanged; this response could be used as a ratiometric ‘off–on’ fluorescent probe for the detection of Cd²⁺. The sensing mechanism was suggested to be: the newly formed CdS‐like cluster with a higher band gap facilitated exciton/hole recombination and effectively enhanced the fluorescence of the CdTe QDs. The proposed probe shows a highly sensitive and selective response to Cd²⁺ and has potential application in the detection of Cd²⁺ in environmental or biological samples.