Chlamydial DNA polymerase I can bypass lesions in vitro

We found that DNA polymerase I from Chlamydiophila pneumoniae AR39 (CpDNApolI) presents DNA-dependent DNA polymerase activity, but has no detectable 3' exonuclease activity. CpDNApolI-dependent DNA synthesis was performed using DNA templates carrying different lesions. DNAs containing 2'-deoxyuridine (dU), 2'-deoxyinosine (dI) or 2'-deoxy-8-oxo-guanosine (8-oxo-dG) served as templates as effectively as unmodified DNAs for CpDNApolI. Furthermore, the CpDNApolI could bypass natural apurinic/apyrimidinic sites (AP sites), deoxyribose (dR), and synthetic AP site tetrahydrofuran (THF). CpDNApolI could incorporate any dNMPs opposite both of dR and THF with the preference to dAMP-residue. CpDNApolI preferentially extended primer with 3'-dAMP opposite dR during DNA synthesis, however all four primers with various 3'-end nucleosides (dA, dT, dC, and dG) opposite THF could be extended by CpDNApolI. Efficiently bypassing of AP sites by CpDNApolI was hypothetically attributed to lack of 3' exonuclease activity.     

Error-prone bypass of O6-methylguanine by DNA polymerase of Pseudomonas aeruginosa phage PaP1

O⁶-Methylguanine (O⁶-MeG) is highly mutagenic and is commonly found in DNA exposed to methylating agents, generally leads to G:C to A:T mutagenesis. To study DNA replication encountering O⁶-MeG by the DNA polymerase (gp90) of P. aeruginosa phage PaP1, we analyzed steady-state and pre-steady-state kinetics of nucleotide incorporation opposite O⁶-MeG by gp90 exo⁻. O⁶-MeG partially inhibited full-length extension by gp90 exo⁻. O⁶-MeG greatly reduces dNTP incorporation efficiency, resulting in 67-fold preferential error-prone incorporation of dTTP than dCTP. Gp90 exo⁻ extends beyond T:O⁶-MeG 2-fold more efficiently than C:O⁶-MeG. Incorporation of dCTP opposite G and incorporation of dCTP or dTTP opposite O⁶-MeG show fast burst phases. The pre-steady-state incorporation efficiency (k_pol/K_d,dNTP) is decreased in the order of dCTP:G > dTTP:O⁶-MeG > dCTP:O⁶-MeG. The presence of O⁶-MeG at template does not affect the binding affinity of polymerase to DNA but it weakened their binding in the presence of dCTP and Mg²⁺. Misincorporation of dTTP opposite O⁶-MeG further weakens the binding affinity of polymerase to DNA. The priority of dTTP incorporation opposite O⁶-MeG is originated from the fact that dTTP can induce a faster conformational change step and a faster chemical step than dCTP. This study reveals that gp90 bypasses O⁶-MeG in an error-prone manner and provides further understanding in DNA replication encountering mutagenic alkylation DNA damage for P. aeruginosa phage PaP1.     

DNA polymerase V-dependent mutator activity in an SOS-induced Escherichia coli strain with a temperature-sensitive DNA polymerase III.

The temperature-sensitive DNA polymerase III (Pol III) encoded by the dnaE486 allele confers a spontaneous mutator activity in SOS-induced bacteria that is largely dependent upon DNA polymerase V (Pol V), encoded by umuD, C. This mutator activity is influenced by the defective proof-reading sub-unit of Pol III encoded by the dnaQ905 (mutD5) allele arguing that Pol V is most likely fixing mutations arising from mismatched primer termini produced by Pol III(486). The size of the dnaQ effect is, however, modest leaving open the possibility that Pol V may be responsible for some of the mutator effect by engaging in bursts of processive activity.     

Mutability of DNA polymerase I: implications for the creation of mutant DNA polymerases

DNA polymerases of the Family A catalyze the addition of deoxynucleotides to a primer with high efficiency, processivity, and selectivity-properties that are critical to their function both in nature and in the laboratory. These polymerases tolerate many amino acid substitutions, even in regions that are evolutionarily conserved. This tolerance can be exploited to create DNA polymerases with novel properties and altered substrate specificities, using rational design and molecular evolution. These efforts have focused mainly on the Family A DNA polymerises -Taq, E. coli Pol I, and T7 - because they are widely utilized in biotechnology today. The redesign of polymerases often requires knowledge of the function of specific residues in the protein, including those located in six evolutionarily conserved regions. The most well characterized of these are motifs A and B, which regulate the fidelity of replication and the incorporation of nucleotide analogs such as dideoxynucleotides. Regions that remain to be more thoroughly characterized are motif C, which is critical for catalysis, and motifs 1, 2 and 6, all of which bind to DNA primer or template. Several recently identified mutants with abilities to incorporate nucleotides with bulky adducts have mutations that are not located within conserved regions and warrant further study. Analysis of these mutants will help advance our understanding of how DNA polymerases select bases with high fidelity.     

De novo DNA synthesis by human DNA polymerase lambda, DNA polymerase mu and terminal deoxyribonucleotidyl transferase

DNA polymerases (pols) catalyse the synthesis of DNA. This reaction requires a primer-template DNA in order to grow from the 3'OH end of the primer along the template. On the other hand terminal deoxyribonucleotidyl transferase (TdT) catalyses the addition of nucleotides at the 3'OH end of a DNA strand, without the need of a template. Pol lambda and pol micro are ubiquitous enzymes, possess both DNA polymerase and terminal deoxyribonucleotidyl transferase activities and belong to pol X family, together with pol beta and TdT. Here we show that pol lambda, pol micro and TdT, all possess the ability to synthesise in vitro short fragments of DNA in the absence of a primer-template or even a primer or a template in the reaction. The DNA synthesised de novo by pol lambda, pol micro and TdT appears to have an unusual structure. Furthermore we found that the amino acid Phe506 of pol lambda is essential for the de novo synthesis. This novel catalytic activity might be related to the proposed functions of these three pol X family members in DNA repair and DNA recombination.     

Interactions of replication versus repair DNA substrates with the Pol I DNA polymerases from Escherichia coli and Thermus aquaticus

Different DNA polymerases partition differently between replication and repair pathways. In this study we examine if two Pol I family polymerases from evolutionarily distant organisms also differ in their preferences for replication versus repair substrates. The DNA binding preferences of Klenow and Klentaq DNA polymerases, from Escherichia coli and Thermus aquaticus respectively, have been studied using a fluorescence competition binding assay. Klenow polymerase binds primed-template DNA (the replication substrate) with up to 50× higher affinity than it binds to nicked DNA, DNA with a 2 base single-stranded gap, blunt-ended DNA, or to a DNA end with a 3′ overhang. In contrast, Klentaq binds all of these DNAs almost identically, indicating that Klenow has a stronger ability to discriminate between replication and repair substrates than Klentaq. In contrast, both polymerases bind mismatched primed-template and blunt-ended DNA tighter than they bind matched primed-template DNA, suggesting that these two proteins may share a similar mechanism to identify mismatched DNA, despite the fact that Klentaq has no proofreading ability. In addition, the presence or absence of 5′- or 3′-phosphates has slightly different effects on DNA binding by the two polymerases, but again reinforce Klenow's more effective substrate discrimination capability.     

The structures of the cell wall teichoic acids from the thermophilic microorganism Geobacillus thermoleovorans strain Fango

The structures of two teichoic acid fractions (TA1 and TA2) isolated from the thermophilic gram-positive bacterium Geobacillus thermoleovorans strain Fango were investigated by means of chemical and NMR spectroscopic methods. The most abundant species (TA1) exhibited a rather regular structure comprising two different repeating units of 1,3-glycerol phosphate nonstoichiometrically substituted by terminal-alpha-D-Gal p (t-alpha-D-Gal p). The second molecular species (TA2) presented a higher structural variability and t-alpha-D-Glc p and the disaccharides t-alpha-D-Glc pNAc-(1-->2)-alpha-D-Glc p and t-alpha-D-Glc pNAc-(1-->3)-alpha-D-Glc p were also present as minor substituents at O-2 of the glycerol phosphate residues. Minor substitution by alanine could also be detected.     

Isolation and characterization of a Geobacillus thermoleovorans strain from an ultra-deep South African gold mine

A thermophilic facultative bacterial isolate was recovered from 3.2km depth in a gold mine in South Africa. This isolate, designated GE-7, was cultivated from pH 8.0, 50 degrees C water from a dripping fracture near the top of an exploration tunnel. GE-7 grows optimally at 65 degrees C and pH 6.5 on a wide range of carbon substrates including cellobiose, hydrocarbons and lactate. In addition to O(2), GE-7 also utilizes nitrate as an electron acceptor. GE-7 is a long rod-shaped bacterium (4-6microm longx0.5microm wide) with terminal endospores and flagella. Phylogenetic analysis of GE-7 16S rDNA sequence revealed high sequence similarity with G. thermoleovorans DSM 5366(T) (99.6%), however, certain phenotypic characteristics of GE-7 were distinct from this and other previously described strains of G. thermoleovorans.     

Preliminary characterization of a thermostable DNA polymerase I from a mesophilic Bacillus sphaericus strain C3-41

A thermostable DNA polymerase I from a mesophilic Bacillus sphaericus strain C3-41 was characterized in this study. The polI was cloned, sequenced and over-expressed in Escherichia coli. The expressed 110 kDa fusion protein of PolI was stable at 70°C for 1 h. Compared with DNA polymerase I of E. coli (TaKaRa), the relative polymerase activity of this PolI was 3.33 ± 0.1 RFU μl⁻¹ at 37°C using fluorescent quantitative analysis. It showed higher polymerase activity than E. coli PolI at higher temperature, with a relative activity of 3.75 ± 0.1 RFU μl⁻¹ at 70°C. The polI sequence analysis and the protein structure prediction indicated that this protein had a high similarly to other PolI from thermophilic micro-organisms. This information is of importance for future study for evolution of the house-keeping gene polI in entomopathogenic bacterium B. sphaericus.     

Protein trans-splicing and characterization of a split family B-type DNA polymerase from the hyperthermophilic archaeal parasite Nanoarchaeum equitans

Nanoarchaeum equitans family B-type DNA polymerase (Neq DNA polymerase) is encoded by two separate genes, the large gene coding for the N-terminal part (Neq L) of Neq DNA polymerase and the small gene coding for the C-terminal part (Neq S), including a split mini-intein sequence. The two Neq DNA polymerase genes were cloned and expressed in Escherichia coli individually, together (for the Neq C), and as a genetically protein splicing-processed form (Neq P). The protein trans-spliced Neq C was obtained using the heating step at 80 degrees C after the co-expression of the two genes. The protein trans-splicing of the N-terminal and C-terminal parts of Neq DNA polymerase was examined in vitro using the purified Neq L and Neq S. The trans-splicing was influenced mainly by temperature, and occurred only at temperatures above 50 degrees C. The trans-splicing reaction was inhibited in the presence of zinc. Neq S has no catalytic activity and Neq L has lower 3'-->5' exonuclease activity; whereas Neq C and Neq P have polymerase and 3'-->5' exonuclease activities, indicating that both Neq L and Neq S are needed to form the active DNA polymerase that possesses higher proofreading activity. The genetically protein splicing-processed Neq P showed the same properties as the protein trans-spliced Neq C. Our results are the first evidence to show experimentally that natural protein trans-splicing occurs in an archaeal protein, a thermostable protein, and a family B-type DNA polymerase.     

Chromatin-bound DNA polymerase from higher plants

Chromatin-bound DNA polymerase has been extracted from pea (Pisum sativum L.) seedlings, and partially purified by solubilization from chromatin followed by chromatography on columns of either DEAE-cellulose or DEAE-Sephadex. The enzyme elutes from DEAE-cellulose as a single peak, but is fractionated into two peaks, CI and CII, by DEAE-Sephadex chromatography. If the enzyme is stored at-15°C for several days prior to chromatography, a third peak, CIII, derived from CII, is obtained. The polymerase is devoid of nuclease activity, and is relatively insensitive to N-ethyl-maleimide. These features, taken with the ion requirements and with data obtained from other plant species, lead to the suggestion that the chromatin-bound DNA polymerase of higher plants is similar to the DNA polymerase- from vertebrates.     

Catalytic properties of cysteine proteinases from Trypanosoma cruzi and Leishmania infantum: a pre-steady-state and steady-state study

Cysteine proteinases are relevant to several aspects of the parasite life cycle and of parasite-host relationship. Moreover, they appear as promising targets for antiparasite chemotherapy. Here, the first quantitative investigation on the steady-state and pre-steady-state kinetics of the papain-like cysteine proteinases from epimastigotes of Trypanosoma cruzi (cruzipain), the agent of Chagas' disease, and from promastigotes of Leishmania infantum, an agent of visceral and cutaneous leishmaniases, is reported. The results indicate that kinetics for the parasite proteinase catalyzed hydrolysis of N-alpha-benzyloxycarbonyl-L-phenylalanyl-L-arginine-(7-amino-4-methylcoumarin) may be consistently fitted to the minimum three-step mechanism involving the acyl.enzyme intermediate E.P: [mechanism: see text] At neutral pH, the k(+3) step (deacylation process) is rate limiting in enzyme catalysis, whereas, at pH<6, the k(+2) step (acylation process) becomes rate limiting. This illustrates the potential danger in interpreting both kcat versus pH profile, given that the acylation or the deacylation step is rate limiting throughout the whole pH range explored, and Km as the true affinity constant for the E:S complex formation. Comparison with the steady-state and pre-steady-state kinetics of homologous plant enzymes suggests that the parasite cysteine proteinase catalytic behavior appears to be of general significance.     

Growth of the Thermophilic Bacterium Geobacillus uralicus as a Function of Temperature and pH: An SCM-Based Kinetic Analysis

The synthetic chemostat model (SCM), originally developed to describe nonstationary growth under widely varying concentrations of the limiting substrate, was modified to account for the effects of nontrophic factors such as temperature and pH. The bacterium Geobacillus uralicus, isolated from an ultradeep well (4680 m), was grown at temperatures ranging from 40 to 75°C and at pH varying from 5 to 9. The biomass kinetics was reasonably well described by the SCM, including the phase of growth deceleration observed in the first hours after a change in the cultivation temperature. At an early stage of batch growth in a neutral or alkalescent medium, bacterial cells showed reversible attachment to the glass surface of the fermentation vessel. The temperature dependence of the maximum specific growth rate (_m) was fitted using the equation _m = Aexp(T)/{1 + expB[1 – C/(T + 273)]}, where A, , B, and C are constants. The maximum specific growth rate of 2.7 h^–1 (generation time, 15.4 min) was attained on a complex nutrient medium (peptone and yeast extract) at 66.5°C and pH 7.5. On a synthetic mineral medium with glucose, the specific growth rate declined to 1.2 h^–1, and the optimal temperature for growth decreased to 62.3°C.     

A new class of mutants in DNA polymerase I that affects gene transposition

A mutant of Escherichia coli strain K12 is defective in transposition of both the transposons Tn5 and Tn10 and the insertion sequences IS1 and IS5. In addition to the defect in transposition, the mutant is also sensitive to methylmethane sulfonate and ultraviolet light, does not grow phage lambda red and is missing the polymerizing activity and the 5′?3′ exonuclease activity of DNA polymerase I, indicating that the mutation is in the structural gene for this enzyme. We have designated the mutant allele as polA34. All of the properties associated with this mutant cotransduce with a marker known to be linked to polA. Furthermore, revertants of the mutant to methylmethane sulfonate resistance also regain the normal transposition frequencies of Tn5, IS1 and IS5. Complementation tests using the diploid polA34/polA show that the sensitivity to methylmethane sulfonate, and the defect in transposition is recessive to the wild-type. Some revertants of polA34 (called polA34 spa) restore resistance to methylmethane sulfonate and u.v. and partially restore the polymerase and 5′?3′ exonuclease activity but do not restore transposition. Thus we conclude that neither the polymerase activity nor the 5′?3′ exonuclease activity are required in transposition, but rather some other property of DNA polymerase I is needed.     

Distinct pools of proliferating cell nuclear antigen associated to DNA replication sites interact with the p125 subunit of DNA polymerase delta or DNA ligase I

Proliferating cell nuclear antigen (PCNA) plays an essential role in DNA replication, repair, and cell cycle control. PCNA is a homotrimeric ring that, when encircling DNA, is not easily extractable. Consequently, the dynamics of protein-protein interactions established by PCNA at DNA replication sites is not well understood. We have used DNase I to release DNA-bound PCNA together with replication proteins including the p125-catalytic subunit of DNA polymerase delta (p125-pol delta), DNA ligase I, cyclin A, and cyclin-dependent kinase 2 (CDK2). Interaction with these proteins was investigated by immunoprecipitation with antibodies binding near the interdomain connector loop or to the C-terminal domain of PCNA, respectively, or with antibodies to p125-pol delta or DNA ligase I. PCNA interaction with p125-pol delta or DNA ligase I was detected only by the latter antibodies, and found to be mutually exclusive. In contrast, antibodies to PCNA co-immunoprecipitated only CDK2. A GST-p21(waf1/cip1) C-terminal peptide displaced p125-pol delta and DNA ligase I, but not CDK2, from PCNA. These results suggest that PCNA trimers bound to DNA during the S phase are organized as distinct pools able to bind selectively different partners. Among them, p125-pol delta and DNA ligase I interact with PCNA in a mutually exclusive manner.     

Distinct metal dependence for catalytic and structural functions in the L-arabinose isomerases from the mesophilic Bacillus halodurans and the thermophilic Geobacillus stearothermophilus

L-Arabinose isomerase (AI) catalyzes the isomerization of L-arabinose to L-ribulose. It can also convert d-galactose to d-tagatose at elevated temperatures in the presence of divalent metal ions. The araA genes, encoding AI, from the mesophilic bacterium Bacillus halodurans and the thermophilic Geobacillus stearothermophilus were cloned and overexpressed in Escherichia coli, and the recombinant enzymes were purified to homogeneity. The purified enzymes are homotetramers with a molecular mass of 232 kDa and close amino acid sequence identity (67%). However, they exhibit quite different temperature dependence and metal requirements. B. halodurans AI has maximal activity at 50 degrees C under the assay conditions used and is not dependent on divalent metal ions. Its apparent K(m) values are 36 mM for L-arabinose and 167 mM for d-galactose, and the catalytic efficiencies (k(cat)/K(m)) of the enzyme were 51.4 mM(-1)min(-1) (L-arabinose) and 0.4 mM(-1)min(-1) (d-galactose). Unlike B. halodurans AI, G. stearothermophilus AI has maximal activity at 65-70 degrees C, and is strongly activated by Mn(2+). It also has a much higher catalytic efficiency of 4.3 mM(-1)min(-1) for d-galactose and 32.5 mM(-1)min(-1)for L-arabinose, with apparent K(m) values of 117 and 63 mM, respectively. Irreversible thermal denaturation experiments using circular dichroism (CD) spectroscopy showed that the apparent melting temperature of B. halodurans AI (T(m)=65-67 degrees C) was unaffected by the presence of metal ions, whereas EDTA-treated G. stearothermophilus AI had a lower T(m) (72 degrees C) than the holoenzyme (78 degrees C). CD studies of both enzymes demonstrated that metal-mediated significant conformational changes were found in holo G. stearothermophilus AI, and there is an active tertiary structure for G. stearothermophilus AI at elevated temperatures for its catalytic activity. This is in marked contrast to the mesophilic B. halodurans AI where cofactor coordination is not necessary for proper protein folding. The metal dependence of G. stearothermophilus AI seems to be correlated with their catalytic and structural functions. We therefore propose that the metal ion requirement of the thermophilic G. stearothermophilus AI reflects the need to adopt the correct substrate-binding conformation and the structural stability at elevated temperatures.     

Genomic characterization of thermophilic Geobacillus species isolated from the deepest sea mud of the Mariana Trench

The thermophilic strains HTA426 and HTA462 isolated from the Mariana Trench were identified as Geobacillus kaustophilus and G. stearothermophilus, respectively, based on physiologic and phylogenetic analyses using 16S rDNA sequences and DNA–DNA relatedness. The genome size of HTA426 and HTA462 was estimated at 3.23–3.49 Mb and 3.7–4.49 Mb, respectively. The nucleotide sequences of three independent -phage inserts of G. stearothermophilus HTA462 have been determined. The organization of protein coding sequences (CDSs) in the two -phage inserts was found to differ from that in the contigs corresponding to each insert assembled by the shotgun clones of the G. kaustophilus HTA426 genome, although the CDS organization in another insert is identical to that in the HTA426 genome.     

Increased dietary cholesterol promotes enhanced mutagenesis in DNA polymerase kappa-deficient mice

DNA polymerase kappa (Polκ) bypasses planar polycyclic N²-guanine adducts in an error-free manner. Cholesterol derivatives may interact with DNA to form similarly bulky lesions. In accordance, these studies examined whether increased mutagenesis of DNA accompanies hypercholesterolemia in Polk^−/− mice. These mice also carried apoE gene knockouts to ensure increased levels of plasma cholesterol following exposure to a high cholesterol diet. The mice carried a reporter transgene (the λ-phage cII gene) for subsequent quantitative analysis of mutagenesis in various tissues. We observed significantly increased mutation frequencies in several organs of apoE^−/−Polk^−/− mice following a high cholesterol diet, compared to those remaining on a standard diet. Regardless of dietary regime, the mutation frequency in many organs was significantly higher in apoE^−/−Polk^−/− than in apoE^−/−Polk^+/+ mice. As expected for polycyclic guanine adducts, the mutations mainly consisted of G:C transversions. The life expectancy of apoE^−/−Polk^−/− mice maintained on a high cholesterol diet was reduced compared to apoE^−/−Polk^+/+ mice. Overall, this study demonstrates a role for Polκ in bypass of cholesterol-induced guanine lesions.     

Improved thermostability and PCR efficiency of Thermococcus celericrescens DNA polymerase via site-directed mutagenesis

The Thermococcus celericrescens (Tcel) DNA polymerase gene, which contains a 2328-bp open reading frame that encodes 775 amino acid residues, was expressed in the Escherichia coli strain Rosetta(DE3)pLysS. The expressed enzyme was purified through heat treatment, HisTrap™ HP column chromatography and then HiTrap™ SP HP column chromatography. Tcel DNA polymerase has poor thermostability and PCR efficiency compared to those of other family B DNA polymerases. To improve thermostability and PCR efficiency, mutant Tcel DNA polymerases were created via site-directed mutagenesis. Specifically, we targeted the A752 residue for enhanced thermostability and the N213 residue for improved PCR efficiency. The mutant Tcel DNA polymerases all showed enhanced PCR efficiency and thermostability compared to those of the wild-type Tcel DNA polymerase. Specifically, the double mutant TcelA752K/N213D DNA polymerase had an approximately three-fold increase in thermostability over that of the wild-type enzyme and amplified a long 10-kb PCR product in an extension time of 2 min. However, there was a small change in the 3′ → 5′ exonuclease activity compared with that of the wild-type Tcel DNA polymerase, even though the mutation is in the ExoII motif. The double mutant TcelA752K/N213D DNA polymerase had a 2.6-fold lower error rate compared to that of Taq DNA polymerase. It seems that the double mutant TcelA752K/N213D DNA polymerase can be used in LA (long and accurate) PCR.