High-efficiency gene inactivation and replacement system for gram-positive bacteria.

A system for high-efficiency single- and double-crossover homologous integration in gram-positive bacteria has been developed, with Lactococcus lactis as a model system. The system is based on a thermosensitive broad-host-range rolling-circle plasmid, pG+host5, which contains a pBR322 replicon for propagation in Escherichia coli at 37 degrees C. A nested set of L. lactis chromosomal fragments cloned onto pG+host5 were used to show that the single-crossover integration frequency was logarithmically proportional to the length of homology for DNA fragments between 0.35 and 2.5 kb. Using random chromosomal 1-kb fragments, we showed that homologous integration can occur along the entire chromosome. We made use of the reported stimulatory effect of rolling-circle replication on intramolecular recombination to develop a protocol for gene replacement. Cultures were first maintained at 37 degrees C to select for a bacterial population enriched for plasmid integrants; activation of the integrated rolling-circle plasmid by a temperature shift to 28 degrees C resulted in efficient plasmid excision by homologous recombination and replacement of a chromosomal gene by the plasmid-carried modified copy. More than 50% of cells underwent replacement recombination when selection was applied for the replacing gene. Between 1 and 40% of cells underwent replacement recombination when no selection was applied. Chromosomal insertions and deletions were obtained in this way. These results show that gene replacement can be obtained at an extremely high efficiency by making use of the thermosensitive rolling-circle nature of the delivery vector. This procedure is applicable to numerous gram-positive bacteria.     

Insertion of bacteriophage phiFSW into the chromosome of Lactobacillus casei strain Shirota (S-1): characterization of the attachment sites and the integrase gene

The integrase gene (int) on the genome of φFSW, which is a temperate bacteriophage of Lactobacillus casei strain Shirota (formerly denoted as S-1), and the four attachment sites on the genomes of the phage and its host were characterized by sequencing. The φFSW integrase was found to belong to the integrase family of site-specific tyrosine recombinase. The attachment sites shared a 40bp common core within which an integrative site-specific recombination occurs. The common core was flanked on one side by an additional segment of high sequence similarity. An integration plasmid, consisting of int, the phage attachment site (attP), and a selectable marker, inserted stably into the bacterial attachment site (attB) within the common core, as did the complete prophage genome at a frequency of more than 10(3)/microg of plasmid DNA. This plasmid was used as a test system for a preliminary mutational analysis of int and attP. The attB common core was located within and near the end of an open reading frame that appears to encode a homolog to glucose 6-phosphate isomerase, an enzyme of the glycolytic pathway. It is unlikely that the prophage integration inactivates this protein, since a change of only the C-terminal amino acid is predicted because of the sequence similarity between attP and attB.     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Excision process of integrated plasmid pBD12 from the Bacillus subtilis chromosome

We studied the behavior of pBD12 plasmid integrated into Bacillus subtilis chromosome via homologous recombination. One copy of the plasmid was integrated into the chromosome, it conferred resistance to low concentrations of antibiotics. Clones with enhanced resistance bearing autonomous plasmid DNAs appeared with a frequency 10(-6) in rec+ but not in recE strain with the integrated plasmid. By restriction and hybridization analysis of some excised plasmids, the sites of excision were determined, chromosomal location of pBD12 plasmid was found to be at the terminal fragment of prophage DNA, so that the att site of phi 105 phage is supposed to be situated on the EcoRI fragment of phage DNA.     

The expression of Streptomyces and Escherichia coli drug-resistance determinants cloned into the Streptomyces phage phi C31

Lysogens obtained by infecting Streptomyces albus G with a phi C31-pBR322 chimaeric prophage or its delta W12 deletion derivative had increased tetracycline resistance. The ability of the delta W12 derivative to transduce tetracycline resistance was inactivated by inserting a viomycin resistance determinant (vph) into the BamHI site of the pBR322 tet gene, and restored by excising the vph gene. Another deletion mutant (delta W17) of the chimaera, carrying an intact tet gene, was normally unable to transduce tetracycline resistance. This inability was correlated with the finding, by Southern hybridisation analysis, that the att site required for insertion of phi C31 prophage into the host chromosome was located within the delta W17 deletion. Use of phi C31 lysogenic recipient permitted the integration of the att-deleted phage, presumably by homologous recombination, giving tetracycline-resistant double lysogens. This technique was extended to S. coelicolor A3(2) in the detection of derivatives of the att-deleted phage into which a thiostrepton-resistance determinant (tsr) had been inserted in vitro. Phage released from double lysogens were mainly recombinants. One such recombinant is a PstI vector for DNA cloning, able to accommodate up to 6 kb of introduced DNA.     

Physical mapping of the virion and the prophage DNAs of a temperate Lactobacillus phage phi FSW

We analysed the physical structure of the DNA of phi FSW, which is a temperate phage of Lactobacillus casei S-1. A circular restriction map of the virion DNA has been constructed with three restriction endonucleases, BamHI, SalI and XhoI. Other data indicated that the phage genome was circularly permuted. In lysogens, the DNA of the prophage was found to be linearized at a specific site and integrated into a specific locus of the host genome, with the same orientation in each case, as evidenced by Southern filter hybridization. We compared the physical structure of phi FSW with its three virulent mutants. One of them had a restriction map indistinguishable from that of phi FSW and two of them contained host-derived DNA sequence(s) in a specific region of the phi FSW genome (V-region). The prophage integration site was mapped on a different segment of the phage genome to the V-region. Derivation of virulent mutants from phi FSW is discussed in relation to the physical structure of the phage genome.     

New recA mutations that dissociate the various RecA protein activities in Escherichia coli provide evidence for an additional role for RecA protein in UV mutagenesis.

To isolate strains with new recA mutations that differentially affect RecA protein functions, we mutagenized in vitro the recA gene carried by plasmid mini-F and then introduced the mini-F-recA plasmid into a delta recA host that was lysogenic for prophage phi 80 and carried a lac duplication. By scoring prophage induction and recombination of the lac duplication, we isolated new recA mutations. A strain carrying mutation recA1734 (Arg-243 changed to Leu) was found to be deficient in phi 80 induction but proficient in recombination. The mutation rendered the host not mutable by UV, even in a lexA(Def) background. Yet, the recA1734 host became mutable upon introduction of a plasmid encoding UmuD*, the active carboxyl-terminal fragment of UmuD. Although the recA1734 mutation permits cleavage of lambda and LexA repressors, it renders the host deficient in the cleavage of phi 80 repressor and UmuD protein. Another strain carrying mutation recA1730 (Ser-117 changed to Phe) was found to be proficient in phi 80 induction but deficient in recombination. The recombination defect conferred by the mutation was partly alleviated in a cell devoid of LexA repressor, suggesting that, when amplified, RecA1730 protein is active in recombination. Since LexA protein was poorly cleaved in the recA1730 strain while phage lambda was induced, we conclude that RecA1730 protein cannot specifically mediate LexA protein cleavage. Our results show that the recA1734 and recA1730 mutations differentially affect cleavage of various substrates. The recA1730 mutation prevented UV mutagenesis, even upon introduction into the host of a plasmid encoding UmuD* and was dominant over recA+. With respect to other RecA functions, recA1730 was recessive to recA+. This demonstrates that RecA protein has an additional role in mutagenesis beside mediating the cleavage of LexA and UmuD proteins.     

The bacteriophage T4 insertion/substitution vector system. A method for introducing site-specific mutations into the virus chromosome

A bacteriophage T4 insertion/substitution vector system has been developed as a means of introducing in vitro generated mutations into the T4 chromosome. The insertion/substitution vector is a 2638-base pair plasmid containing the pBR322 origin of replication and ampicillin resistance determinant, a T4 gene 23 promoter/synthetic supF tRNA gene fusion, and a polylinker with eight unique restriction enzyme recognition sites. A T4 chromosomal "target" DNA sequence is cloned into this vector and mutated by standard recombinant DNA techniques. Escherichia coli cells containing this plasmid are then infected with T4 bacteriophage that carry amber mutations in two essential genes. The plasmid integrates into the T4 chromosome by recombination between the plasmid-borne T4 target sequence and its homologous chromosomal counterpart. The resulting phage, termed "integrants," are selectable by the supF-mediated suppression of their two amber mutations. Thus, although the integrants comprise 1-3% or less of the total phage progeny, growth on a nonsuppressing host permits their direct selection. The pure integrant phage can be either analyzed directly for a possible mutant phenotype or transferred to nonselective growth conditions. In the latter case, plasmid-free phage segregants rapidly accumulate due to homologous recombination between the duplicated target sequences surrounding the supF sequence in each integrant chromosome. A major fraction of these segregants will retain the in vitro generated mutation within their otherwise unchanged chromosomes and are isolated as stable mutant bacteriophage. The insertion/substitution vector system thereby allows any in vitro mutated gene to be readily substituted for its wild-type counterpart in the bacteriophage T4 genome.     

Genetic study of plasmid integration into yeast chromosomes. IV. Integration of the plasmid pYF91 into different yeast chromosomes

Integration of the episomic chimeric plasmid pYF91 into yeast chromosomes has been studied. Plasmid insertion into the chromosomes was observed to occur with the frequency of 4 X 10(-8). 379 integrants were selected from the highly unstable (cir0) transformants. The fact of plasmid integration into particular chromosomes was confirmed for 318 integrants. Genetic analysis showed that the plasmid can integrate into the region of LEU2 gene or into another arm of chromosome III (227 integrants), and also into other chromosomes: I, II, IV, V, VI, VII, VIII, IX, XII, XV (91 integrants). It is suggested that integration is the result of recombination between yeast chromosomes and homologous plasmid regions carrying LEU2 gene or Ty element and "delta" sequence.     

Integration of the bacteriophage phi 3T-coded thymidylate synthetase gene into the Bacillus subtilis chromosome

Transformation of Bacillus subtilis 168 Thy- auxotrophs with phi 3T deoxyribonucleic acid (DNA) to thymine independence was found to involve site-specific recombination of phi 3T DNA sequences with their homologous counterparts in the bacterial chromosome. During the transformation, the phage phi 3T-encoded thymidylate synthetase gene, thyP3, was shown to integrate at two genetically distinct sites in the B. Subtilis 168 chromosome. The first site was identified to be in the bacterial thymidylate synthetase gene, thyA. The second site was in a prophage (SPB) known to be carried in the host genome. The frequency of the integration of the thyP3 gene at each of the two loci and some of the parameters affecting this frequency were studied. The common origin of the thyP3 and thyA genes and their molecular evolution are also reported.     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Haemophilus influenzae immunoglobulin A1 protease genes: cloning by plasmid integration-excision, comparative analyses, and localization of secretion determinants.

Many bacteria which establish infections after invasion at human mucosal surfaces produce enzymes which cleave immunoglobulin A (IgA), the primary immunoglobulin involved with protection at these sites. Bacterial species such as Haemophilus influenzae which produce IgA1 proteases secrete this enzyme into their environment. However, when the gene encoding this protein was isolated from H. influenzae serotype d and introduced into Escherichia coli, the activity was not secreted into the medium but was localized in the periplasmic space. In this study, the IgA1 protease gene (iga) from an H. influenzae serotype c strain was isolated and the gene from the serotype d strain was reisolated. The IgA1 proteases produced in E. coli from these genes were secreted into the growth medium. A sequence linked to the carboxyl terminus of the iga gene but not present in the original clone was shown to be necessary to achieve normal secretion. Tn5 mutagenesis of the additional carboxyl-terminal region was used to define a 75- to 100-kilodalton coding region required for complete secretion of IgA1 protease but nonessential for protease activity. The iga genes were isolated by a plasmid integration-excision procedure. In this method a derivative of plasmid pBR322 containing a portion of the protease gene and the kanamycin resistance determinant of Tn5 was introduced into H. influenzae by transformation. The kanamycin resistance gene was expressed in H. influenzae, but since pBR322 derivatives are unable to replicate in this organism, kanamycin-resistant transformants arose by integration of the plasmid into the Haemophilus chromosome by homologous recombination. The plasmid, together with the adjoining DNA encoding IgA1 protease, was then excised from the chromosome with DNA restriction enzymes, religated, and reintroduced into E. coli. Comparisons between the H. influenzae protease genes were initiated which are useful in locating functional domains of these enzymes.     

Cloning of the Bacillus subtilis recE+ gene and functional expression of recE+ in B. subtilis.

By use of the Bacillus subtilis bacteriophage cloning vehicle phi 105J23, B. subtilis chromosomal MboI fragments have been cloned that alleviate the pleiotropic effects of the recE4 mutation. The recombinant bacteriophages phi 105Rec phi 1 (3.85-kilobase insert) and phi 105Rec phi 4 (3.3-kilobase insert) both conferred on the recE4 strain YB1015 resistance to ethylmethane sulfonate, methylmethane sulfonate, mitomycin C, and UV irradiation comparable with the resistance observed in recE+ strains. While strain YB1015 (recE4) and its derivatives lysogenized with bacteriophage phi 105J23 were not transformed to prototrophy by B. subtilis chromosomal DNA, strain YB1015 lysogenized with either phi 105Rec phi 1 or phi 105Rec phi 4 was susceptible to transformation with homologous B. subtilis chromosomal DNA. The heteroimmune prophages phi 105 and SPO2 were essentially uninducible in strain YB1015. Significantly, both recombinant prophages phi 105Rec phi 1 and phi 105Rec phi 4 were fully inducible and allowed the spontaneous and mitomycin C-dependent induction of a coresident SPO2 prophage in a recE4 host. The presence of the recombinant prophages also restored the ability of din genes to be induced in strains carrying the recE4 mutation. Finally, both recombinant bacteriophages elaborated a mitomycin C-inducible, 45-kilodalton protein that was immunoreactive with Escherichia coli recA+ gene product antibodies. Collectively, these data demonstrate that the recE+ gene has been cloned and that this gene elaborates the 45-kilodalton protein that is involved in SOB induction and homologous recombination.     

Analysis and possible role of hyperrecombination in the termination region of the Escherichia coli chromosome.

The frequency of excisive homologous recombination has been measured at various positions along the Escherichia coli chromosome. The reporter system makes use of a lambda cI857 prophage integrated by homologous recombination within Tn5 or Tn10 transposons already installed at known positions in the E. coli chromosome. The excision frequency per cell and per generation was determined by monitoring the evolution of the relative number of temperature-resistant (cured) bacteria is a function of the age of the cultures. Excisions, due to RecA-dependent homologous exchanges, appeared to occur more frequently in the preferential termination zone for chromosome replication. The highest frequency of excision observed is compatible with a recombination event at each replication cycle in this region. On the basis of these data, we propose a model involving homologous recombination in the final steps of bacterial chromosome replication and separation.     

Expression of the gtfI gene from Streptococcus sobrinus in Streptococcus anginosus using integration-mediated transformation system

We have constructed a Streptococcus anginosus transformant expressing the gtfI gene from Streptococcus sobrinus, using a previously developed integration-mediated transformation system to introduce foreign genes onto the oral streptococcal chromosome, and attempted to evaluate the gene expression. In this system, one cloning plasmid and three pACYC184 derivatives, anchor, heterodimer, and integration plasmids were used for the construction of a series of integrants via homologous recombination. A portion of S. sobrinus gtfI gene devoid of approximately 1 kb of the 5'-region derived from pMD39 was cloned into the integration plasmid and introduced onto the S. anginosus chromosome. Next, the polymerase chain reaction product corresponding to 2.0 kb of the 5'-region of the gtfI gene from S. sobrinus chromosome was further cloned into the cloning plasmid, and the intact gtfI gene was reconstructed following integration. The final S. anginosus integrant successfully secreted the enzymatically active gtfI gene products and extracellular enzyme was characterized. This enzyme produced water-insoluble glucans and glucan-forming activity was stimulated by the addition of dextranT10. When this integrant was grown in Todd-Hewitt broth supplemented with sucrose, the integrant adhered to the glass surface in vitro and this integrant exhibited the different colony morphology on Mitis-Salivarius agar plates compared to S. sobrinus and S. anginosus. These observations strongly suggest that the construction of S. anginosus integrant expressing S. sobrinus gtfI gene using this transformation system may be an effective means of analysis of cariogenic biofilm formation.     

New method for generating deletions and gene replacements in Escherichia coli.

We describe a method for generating gene replacements and deletions in Escherichia coli. The technique is simple and rapid and can be applied to most genes, even those that are essential. What makes this method unique and particularly effective is the use of a temperature-sensitive pSC101 replicon to facilitate the gene replacement. The method proceeds by homologous recombination between a gene on the chromosome and homologous sequences carried on a plasmid temperature sensitive for DNA replication. Thus, after transformation of the plasmid into an appropriate host, it is possible to select for integration of the plasmid into the chromosome at 44 degrees C. Subsequent growth of these cointegrates at 30 degrees C leads to a second recombination event, resulting in their resolution. Depending on where the second recombination event takes place, the chromosome will either have undergone a gene replacement or retain the original copy of the gene. The procedure can also be used to effect the transfer of an allele from a plasmid to the chromosome or to rescue a chromosomal allele onto a plasmid. Since the resolved plasmid can be maintained by selection, this technique can be used to generate deletions of essential genes.     

Targeted gene disruption by homologous recombination in the hyperthermophilic archaeon Thermococcus kodakaraensis KOD1

In contrast to the high accumulation in sequence data for hyperthermophilic archaea, methodology for genetically manipulating these strains is still at an early stage. This study aimed to develop a gene disruption system for the hyperthermophilic euryarchaeon Thermococcus kodakaraensis KOD1. Uracil-auxotrophic mutants with mutations in the orotidine-5'-monophosphate decarboxylase gene (pyrF) were isolated by positive selection using 5-fluoroorotic acid (5-FOA) and used as hosts for further transformation experiments. We then attempted targeted disruption of the trpE locus in the host strain by homologous recombination, as disruption of trpE was expected to result in tryptophan auxotrophy, an easily detectable phenotype. A disruption vector harboring the pyrF marker within trpE was constructed for double-crossover recombination. The host cells were transformed with the exogenous DNA using the CaCl(2) method, and several transformants could be selected based on genetic complementation. Genotypic and phenotypic analyses of a transformant revealed the unique occurrence of targeted disruption, as well as a phenotypic change of auxotrophy from uracil to tryptophan caused by integration of the wild-type pyrF into the host chromosome at trpE. As with the circular plasmid, gene disruption with linear DNA was also possible when the homologous regions were relatively long. Shortening these regions led to predominant recombination between the pyrF marker in the exogenous DNA and the mutated allele on the host chromosome. In contrast, we could not obtain trpE disruptants by insertional inactivation using a vector designed for single-crossover recombination. The gene targeting system developed in this study provides a long-needed tool in the research on hyperthermophilic archaea and will open the way to a systematic, genetic approach for the elucidation of unknown gene function in these organisms.     

Mechanism of non-tandem integration of prophage phi 80 into the chromosome of the wild-type Escherichia coli

We studied the ability of lambda, phi 80 and their hybrid lambda att80 to lysogenize homoimmune monolysogens and examined the prophage locations on the chromosome of the resulting polylysogens. We observed an effective integration of phi 80 and lambda att80, in contrast to lambda, into the host chromosome, exclusively, at the attachment sites that were not occupied by the resident prophage (nontandem). Besides, the lambda att80 (int+) prophage was observed to ensure effective nontandem integration of a homoimmune int mutant DNA. Hence, we inferred that the expression of the int gene in the phi 80 prophage is constitutive, cI-independent and results in nontandem integration of the homoimmune prophage. The validity of this inference has been supported experimentally: (i) the only lysogen that was found to contain a phi 80 tandem was highly unstable (spontaneous segregation of monolysogens occurred 6-7 times more frequently than with the lambda tandem); (ii) an int inactivating mutation stabilized the phi 80 tandem; as a result, the int mutant has the frequency of tandem integration as high as that of lambda, while no nontandem integration was observed. A hypothesis is proposed which accounts for the instability of the phi 80 tandems and explains the relation between this phenomenon and the prophage ability to integrate into secondary attachment sites in the presence of the primary (normal) one.     

Inheritance of nocardiophage phi EC in matings of nocardial lysogens.

Lysogens of Nocardia erythropolis were mated with nonlysogenic strains to study the inheritance of the phi EC prophage. Crosses between lysogenic strains of the Mat-Ce mating type and nonlysogenic Mat-cE strains produced Mat-cE lysogens at a recovery rate of 17%, whereas recombination frequencies between chromosomal traits were about 2.3 x 10(-5). Crosses of lysogenic Mat-cE mating types with nonlysogenic Mat-Ce produced Mat-Ce lysogens at a recovery rate of 19%, whereas recombinants for chromosomal traits were recovered at only 1.8 x 10(-5). Crosses of homologous mating types, lysogenic Mat-Ce with nonlysogenic Mat-Ce or lysogenic Mat-cE with nonlysogenic Mat-cE, failed to transfer the prophage. It was concluded that the phi EC prophage exists as a plasmid and can be transferred at high frequencies with patterns of transfer controlled like typical nocardial fertility. Evidence that the prophage may also exist as an integrated element was observed from recombination analyses.