Covalent labeling of cell-surface proteins for in-vivo FRET studies

Fluorescence resonance energy transfer (FRET) is a powerful technique to reveal interactions between membrane proteins in live cells. Fluorescence labeling for FRET is typically performed by fusion with fluorescent proteins (FP) with the drawbacks of a limited choice of fluorophores, an arduous control of donor-acceptor ratio and high background fluorescence arising from intracellular FPs. Here we show that these shortcomings can be overcome by using the acyl carrier protein labeling technique. FRET revealed interactions between cell-surface neurokinin-1 receptors simultaneously labeled with a controlled ratio of donors and acceptors. Moreover, using FRET the specific binding of fluorescent agonists could be monitored.     

Fluorescent proteins for FRET microscopy: monitoring protein interactions in living cells

The discovery and engineering of novel fluorescent proteins (FPs) from diverse organisms is yielding fluorophores with exceptional characteristics for live-cell imaging. In particular, the development of FPs for fluorescence (or F?rster) resonance energy transfer (FRET) microscopy is providing important tools for monitoring dynamic protein interactions inside living cells. The increased interest in FRET microscopy has driven the development of many different methods to measure FRET. However, the interpretation of FRET measurements is complicated by several factors including the high fluorescence background, the potential for photoconversion artifacts and the relatively low dynamic range afforded by this technique. Here, we describe the advantages and disadvantages of four methods commonly used in FRET microscopy. We then discuss the selection of FPs for the different FRET methods, identifying the most useful FP candidates for FRET microscopy. The recent success in expanding the FP color palette offers the opportunity to explore new FRET pairs.     

The Impact of Heterogeneity and Dark Acceptor States on FRET: Implications for Using Fluorescent Protein Donors and Acceptors

Förster resonance energy transfer (FRET) microscopy is widely used to study protein interactions in living cells. Typically, spectral variants of the Green Fluorescent Protein (FPs) are incorporated into proteins expressed in cells, and FRET between donor and acceptor FPs is assayed. As appreciable FRET occurs only when donors and acceptors are within 10 nm of each other, the presence of FRET can be indicative of aggregation that may denote association of interacting species. By monitoring the excited-state (fluorescence) decay of the donor in the presence and absence of acceptors, dual-component decay analysis has been used to reveal the fraction of donors that are FRET positive (i.e., in aggregates)._However, control experiments using constructs containing both a donor and an acceptor FP on the same protein repeatedly indicate that a large fraction of these donors are FRET negative, thus rendering the interpretation of dual-component analysis for aggregates between separately donor-containing and acceptor-containing proteins problematic. Using Monte-Carlo simulations and analytical expressions, two possible sources for such anomalous behavior are explored: 1) conformational heterogeneity of the proteins, such that variations in the distance separating donor and acceptor FPs and/or their relative orientations persist on time-scales long in comparison with the excited-state lifetime, and 2) FP dark states.     

Improving the flexibility of genetically encoded voltage indicators via intermolecular FRET

A new family of genetically encoded voltage indicators (GEVIs) has been developed based on intermolecular Förster resonance energy transfer (FRET). To test the hypothesis that the GEVI ArcLight functions via interactions between the fluorescent protein (FP) domains of neighboring probes, the FP of ArcLight was replaced with either a FRET donor or acceptor FP. We discovered relatively large FRET signals only when cells were cotransfected with both the FRET donor and acceptor GEVIs. Using a cyan fluorescent protein donor and an RFP acceptor, we were able to observe a voltage-dependent signal with an emission peak separated by over 200 nm from the excitation wavelength. The intermolecular FRET strategy also works for rhodopsin-based probes, potentially improving their flexibility as well. Separating the FRET pair into two distinct proteins has important advantages over intramolecular FRET constructs. The signals are larger because the voltage-induced conformational change moves two FPs independently. The expression of the FRET donor and acceptor can also be restricted independently, enabling greater cell type specificity as well as refined subcellular voltage reporting.     

Quantification of protein interaction in living cells by two-photon spectral imaging with fluorescent protein fluorescence resonance energy transfer pair devoid of acceptor bleed-through

Fluorescence resonance energy transfer (FRET) between fluorescent proteins (FPs) is a powerful method to visualize and quantify protein-protein interaction in living cells. Unfortunately, the emission bleed-through of FPs limits the usage of this complex technique. To circumvent undesirable excitation of the acceptor fluorophore, using two-photon excitation, we searched for FRET pairs that show selective excitation of the donor but not of the acceptor fluorescent molecule. We found this property in the fluorescent cyan fluorescent protein (CFP)/yellow fluorescent protein (YFP) and YFP/mCherry FRET pairs and performed two-photon excited FRET spectral imaging to quantify protein interactions on the later pair that shows better spectral discrimination. Applying non-negative matrix factorization to unmix two-photon excited spectral imaging data, we were able to eliminate the donor bleed-through as well as the autofluorescence. As a result, we achieved FRET quantification by means of a single spectral acquisition, making the FRET approach not only easy and straightforward but also less prone to calculation artifacts. As an application of our approach, the intermolecular interaction of amyloid precursor protein and the adaptor protein Fe65 associated with Alzheimer's disease was quantified. We believe that the FRET approach using two-photon and fluorescent YFP/mCherry pair is a promising method to monitor protein interaction in living cells.     

Go with the glow: fluorescent proteins to light transgenic organisms

Once a biological novelty known for their role in bioluminescence, fluorescent proteins (FPs) from marine invertebrates have revolutionized the life sciences. Organisms from all kingdoms have been transformed with the Aequorea victoria green fluorescent protein (GFP), and biotechnology has been advanced by the use of FPs. This article reviews the current uses of FPs in whole transgenic organisms and genomics and looks beyond GFP to the complete color palette and spectral properties afforded by FPs from other marine organisms. Coupled with electronic devices for visualizing and quantifying FPs, recently cloned FP genes might be useful for the ecological monitoring of transgenic organisms in the environment. Therefore, this review also addresses the in vivo labeling of organisms with an emphasis on plants.     

Directed evolution of a monomeric, bright and photostable version of Clavularia cyan fluorescent protein: structural characterization and applications in fluorescence imaging

The arsenal of engineered variants of the GFP [green FP (fluorescent protein)] from Aequorea jellyfish provides researchers with a powerful set of tools for use in biochemical and cell biology research. The recent discovery of diverse FPs in Anthozoa coral species has provided protein engineers with an abundance of alternative progenitor FPs from which improved variants that complement or supersede existing Aequorea GFP variants could be derived. Here, we report the engineering of the first monomeric version of the tetrameric CFP (cyan FP) cFP484 from Clavularia coral. Starting from a designed synthetic gene library with mammalian codon preferences, we identified dimeric cFP484 variants with fluorescent brightness significantly greater than the wild-type protein. Following incorporation of dimer-breaking mutations and extensive directed evolution with selection for blue-shifted emission, high fluorescent brightness and photostability, we arrived at an optimized variant that we have named mTFP1 [monomeric TFP1 (teal FP 1)]. The new mTFP1 is one of the brightest and most photostable FPs reported to date. In addition, the fluorescence is insensitive to physiologically relevant pH changes and the fluorescence lifetime decay is best fitted as a single exponential. The 1.19 A crystal structure (1 A=0.1 nm) of mTFP1 confirms the monomeric structure and reveals an unusually distorted chromophore conformation. As we experimentally demonstrate, the high quantum yield of mTFP1 (0.85) makes it particularly suitable as a replacement for ECFP (enhanced CFP) or Cerulean as a FRET (fluorescence resonance energy transfer) donor to either a yellow or orange FP acceptor.     

Modern fluorescent proteins: from chromophore formation to novel intracellular applications

The diverse biochemical and photophysical properties of fluorescent proteins (FPs) have enabled the generation of a growing palette of colors, providing unique opportunities for their use in a variety of modern biology applications. Modulation of these FP characteristics is achieved through diversity in both the structure of the chromophore as well as the contacts between the chromophore and the surrounding protein barrel. Here we review our current knowledge of blue, green, and red chromophore formation in permanently emitting FPs, photoactivatable FPs, and fluorescent timers. Progress in understanding the interplay between FP structure and function has allowed the engineering of FPs with many desirable features, and enabled recent advances in microscopy techniques such as super-resolution imaging of single molecules, imaging of protein dynamics, photochromic FRET, deep-tissue imaging, and multicolor two-photon microscopy in live animals.     

Detection of programmed cell death using fluorescence energy transfer.

Fluorescence energy transfer (FRET) can be generated when green fluorescent protein (GFP) and blue fluorescent protein (BFP) are covalently linked together by a short peptide. Cleavage of this linkage by protease completely eliminates FRET effect. Caspase-3 (CPP32) is an important cellular protease activated during programmed cell death. An 18 amino acid peptide containing CPP32 recognition sequence, DEVD, was used to link GFP and BFP together. CPP32 activation can be monitored by FRET assay during the apoptosis process.     

Live cell detection of caspase-3 activation by a Discosoma-red-fluorescent-protein-based fluorescence resonance energy transfer construct

A probe consisting of Discosoma red fluorescent protein (DsRed) and enhanced yellow fluorescent protein (EYFP) linked by a 19-amino-acid chain containing the caspase-3 cleavage site Asp-Glu-Val-Asp was developed to monitor caspase-3 activation in living cells. The expression of the tandem construct in mammalian cells yielded a strong red fluorescence when excited with 450- to 490-nm light or with a 488-nm argon ion laser line as a result of fluorescence resonance energy transfer (FRET) from donor EYFP to acceptor DsRed. The advantage over previous constructs using cyan fluorescent protein is that our construct can be used when excitation wavelengths lower than 488nm are not available. To validate the construct, murine HT-22 hippocampal neuronal cells were triggered to undergo CD95-induced neuronal death. An increase in caspase-3 activity was demonstrated by a reduction of FRET in cells transfected with the construct. This was manifested by a dequenching of EYFP fluorescence leading to an increase in EYFP emission and a corresponding decrease in DsRed fluorescence, which correlated with an increase in pro-caspase-3 processing. We conclude that CD95-induced caspase-3 activation in HT-22 cells was readily detected at the single-cell level using the DsRed-EYFP-based FRET construct, making this a useful technology to monitor caspase-3 activity in living cells.     

CaMK-II oligomerization potential determined using CFP/YFP FRET

Members of the Ca(2+)/calmodulin-dependent protein kinase II (CaMK-II) family are encoded throughout the animal kingdom by up to four genes (alpha, beta, gamma, and delta). Over three dozen known CaMK-II splice variants assemble into approximately 12-subunit oligomers with catalytic domains facing out from a central core. In this study, the catalytic domain of alpha, beta, and delta CaMK-IIs was replaced with cyan (CFP) or yellow fluorescent protein (YFP) for fluorescence resonance energy transfer (FRET) studies. FRET, when normalized to total CFP and YFP, reproducibly yielded values which reflected oligomerization preference, inter-subunit spacing, and localization. FRET occurred when individual CFP and YFP-linked CaMK-IIs were co-expressed, but not when they were expressed separately and then mixed. All hetero-oligomers exhibited FRET values that were averages of their homo-oligomeric parents, indicating no oligomeric preference or restriction. FRET for CaMK-II homo-oligomers was inversely proportional to the variable region length. FPs were monomerized (Leu221 to Lys221) for this study, thus eliminating any potential artifact caused by FP-CaMK-II aggregates. Our results indicate that alpha, beta, and delta CaMK-IIs can freely hetero-oligomerize and that increased variable region lengths place amino termini further apart, potentially influencing the rate of inter-subunit autophosphorylation.     

Visualizing and quantifying the differential cleavages of the eukaryotic translation initiation factors eIF4GI and eIF4GII in the enterovirus‐infected cell

Enterovirus (EV) infection has been shown to cause a marked shutoff of host protein synthesis, an event mainly achieved through the cleavages of eukaryotic translation initiation factors eIF4GI and eIF4GII that are mediated by viral 2A protease (2A^pro). Using fluorescence resonance energy transfer (FRET), we developed genetically encoded and FRET‐based biosensors to visualize and quantify the specific proteolytic process in intact cells. This was accomplished by stable expression of a fusion substrate construct composed of the green fluorescent protein 2 (GFP²) and red fluorescent protein 2 (DsRed2), with a cleavage motif on eIF4GI or eIF4GII connected in between. The FRET biosensor showed a real‐time and quantifiable impairment of FRET upon EV infection. Levels of the reduced FRET closely correlated with the cleavage kinetics of the endogenous eIF4Gs isoforms. The FRET impairments were solely attributed to 2A^pro catalytic activity, irrespective of other viral‐encoded protease, the activated caspases or general inhibition of protein synthesis in the EV‐infected cells. The FRET biosensors appeared to be a universal platform for several related EVs. The spatiotemporal and quantitative imaging enabled by FRET can shed light on the protease–substrate behaviors in their normal milieu, permitting investigation into the molecular mechanism underlying virus‐induced host translation inhibition. Biotechnol. Bioeng. 2009; 104: 1142–1152. © 2009 Wiley Periodicals, Inc.     

Assessing the tendency of fluorescent proteins to oligomerize under physiologic conditions

Several fluorescent proteins (FPs) are prone to forming low-affinity oligomers. This undesirable tendency is exacerbated when FPs are confined to membranes or when fused to naturally oligomeric proteins. Oligomerization of FPs limits their suitability for creating fusions with proteins of interest. Unfortunately, no standardized method evaluates the biologically relevant oligomeric state of FPs. Here, we describe a quantitative visual assay for assessing whether FPs are sufficiently monomeric under physiologic conditions. Membrane-associated FP-fusion proteins, by virtue of their constrained planar geometry, achieve high effective concentrations. We exploited this propensity to develop an assay to measure FP tendencies to oligomerize in cells. FPs were fused on the cytoplasmic end of an endoplasmic reticulum (ER) signal-anchor membrane protein (CytERM) and expressed in cells. Cells were scored based on the ability of CytERM to homo-oligomerize with proteins on apposing membranes and restructure the ER from a tubular network into organized smooth ER (OSER) whorl structures. The ratio of nuclear envelope and OSER structures mean fluorescent intensities for cells expressing enhanced green fluorescent protein (EGFP) or monomeric green fluorescent protein (mGFP) CytERM established standards for comparison of uncharacterized FPs. We tested three FPs and identified two as sufficiently monomeric, while a third previously reported as monomeric was found to strongly oligomerize.     

Resonance energy transfer between green fluorescent protein variants: complexities revealed with myosin fusion proteins

Green fluorescent protein and its variants are frequently used as F?rster (fluorescence) resonance energy transfer (FRET) pairs to determine the proximity of protein domains. We prepared fusion proteins comprising yellow fluorescent protein-Dictyostelium myosin II motor domain-cyan fluorescent protein (YFP-myosin-CFP) and compared their FRET properties with an existing construct (GFP-myosin-BFP), containing a green fluorescent protein acceptor and blue fluorescent protein donor [Suzuki, Y., Yasunaga, T., Ohkura, R., Wakabayashi, T. and Sutoh, K. (1998) Nature 396, 380-383]. The latter construct showed an apparent 40% reduction in acceptor fluorescence on ATP addition, when excited via the donor, compared with the YFP-myosin-CFP constructs which showed a small increase (相似文献   

Quantitative analysis of chromatin compaction in living cells using FLIM–FRET

We present a quantitative Förster resonance energy transfer (FRET)–based assay using multiphoton fluorescence lifetime imaging microscopy (FLIM) to measure chromatin compaction at the scale of nucleosomal arrays in live cells. The assay uses a human cell line coexpressing histone H2B tagged to either enhanced green fluorescent protein (FP) or mCherry FPs (HeLa^H2B-2FP). FRET occurs between FP-tagged histones on separate nucleosomes and is increased when chromatin compacts. Interphase cells consistently show three populations of chromatin with low, medium, or high FRET efficiency, reflecting spatially distinct regions with different levels of chromatin compaction. Treatment with inhibitors that either increase chromatin compaction (i.e., depletion of adenosine triphosphate) or decrease chromosome compaction (trichostatin A) results in a parallel increase or decrease in the FLIM–FRET signal. In mitosis, the assay showed variation in compaction level, as reflected by different FRET efficiency populations, throughout the length of all chromosomes, increasing to a maximum in late anaphase. These data are consistent with extensive higher order folding of chromatin fibers taking place during anaphase.     

Optical sensors for measuring dynamic changes of cytosolic metabolite levels in yeast

Optical sensors allow dynamic quantification of metabolite levels with subcellular resolution. Here we describe protocols for analyzing cytosolic glucose levels in yeast using genetically encoded F?rster resonance energy transfer (FRET) sensors. FRET glucose sensors with different glucose affinities (K(d)) covering the low nano- to mid- millimolar range can be targeted genetically to the cytosol or to subcellular compartments. The sensors detect the glucose-induced conformational change in the bacterial periplasmic glucose/galactose binding protein MglB using FRET between two fluorescent protein variants. Measurements can be performed with a single sensor or multiple sensors in parallel. In one approach, cytosolic glucose accumulation is measured in yeast cultures in a 96-well plate using a fluorimeter. Upon excitation of the cyan fluorescent protein (CFP), emission intensities of CFP and YFP (yellow fluorescent protein) are captured before and after glucose addition. FRET sensors provide temporally resolved quantitative data of glucose for the compartment of interest. In a second approach, reversible changes of cytosolic free glucose are measured in individual yeast cells trapped in a microfluidic platform, allowing perfusion of different solutions while FRET changes are monitored in a microscope setup. By using the microplate fluorimeter protocol, 96 cultures can be measured in less than 1 h; analysis of single cells of a single genotype can be completed in <2 h. FRET-based analysis has been performed with glucose, maltose, ATP and zinc sensors, and it can easily be adapted for high-throughput screening using a wide spectrum of sensors.     

Establishment of a fluorescence resonance energy transfer-based bioassay for detecting dioxin-like compounds

Dioxins comprise a group of compounds which contain a double aromatic ring-like structure. They are among the most prevalent and toxic environmental pollutants. Accumulation of dioxins in human tissues poses a potential threat to human health. Currently, analytical chemical procedures dominate dioxin-detection protocols. In this study, we established a fluorescence resonance energy transfer (FRET)-based dioxin-detection bioassay. Aryl hydrocarbon receptor (AHR) and AHR nuclear translocator (ARNT) fused-cyan fluorescent protein (CFP) and -yellow fluorescent protein (YFP) constructed were transiently co-transfected into rat hepatoma cell line, H4IIEC3 cells. Our results showed that no FRET signals were detected in AHR-CFP- and ARNT-YFP-transfected H4IIEC3 cells. However, dioxin treatments upregulated FRET signals in these transfected cells in a dose-dependent manner. This work highlighted the potential of FRET technique in the detection of dioxin-like compounds.     

A Monomeric Photoconvertible Fluorescent Protein for Imaging of Dynamic Protein Localization

The use of green-to-red photoconvertible fluorescent proteins (FPs) enables researchers to highlight a subcellular population of a fusion protein of interest and to image its dynamics in live cells. In an effort to enrich the arsenal of photoconvertible FPs and to overcome the limitations imposed by the oligomeric structure of natural photoconvertible FPs, we designed and optimized a new monomeric photoconvertible FP. Using monomeric versions of Clavularia sp. cyan FP as template, we employed sequence-alignment-guided design to create a chromophore environment analogous to that shared by known photoconvertible FPs. The designed gene was synthesized and, when expressed in Escherichia coli, found to produce green fluorescent colonies that gradually switched to red after exposure to white light. We subjected this first-generation FP [named mClavGR1 (monomeric Clavularia-derived green-to-red photoconvertible 1)] to a combination of random and targeted mutageneses and screened libraries for efficient photoconversion using a custom-built system for illuminating a 10-cm Petri plate with 405-nm light. Following more than 15 rounds of library creation and screening, we settled on an optimized version, known as mClavGR2, that has eight mutations relative to mClavGR1. Key improvements of mClavGR2 relative to mClavGR1 include a 1.4-fold brighter red species, 1.8-fold higher photoconversion contrast, and dramatically improved chromophore maturation in E. coli. The monomeric status of mClavGR2 has been demonstrated by gel-filtration chromatography and the functional expression of a variety of mClavGR2 chimeras in mammalian cells. Furthermore, we have exploited mClavGR2 to determine the diffusion kinetics of the membrane protein intercellular adhesion molecule 1 both when the membrane is in contact with a T-lymphocyte expressing leukocyte-function-associated antigen 1 and when it is not. These experiments clearly establish that mClavGR2 is well suited for rapid photoconversion of protein subpopulations and subsequent tracking of dynamic changes in localization in living cells.