A neutral lipase applicable in biodiesel production from a newly isolated Streptomyces sp. CS326

In an attempt to isolate a biocatalyst able to catalyze biodiesel production from microbial source, Streptomyces sp. CS326 was screened from hundreds of soil isolates collected from various parts of Korea. In 16S rRNA sequence analysis, the strain showed high degree of similarity with Streptomyces xanthocidicus (99.79%); therefore, it is classified as Streptomyces sp. CS326. An extracellular lipase produced by the strain (LP326) was purified using a single step gel permeation chromatography on Sepharose CL-6B. Molecular weight of LP326 was estimated to be 17,000 Da by SDS-PAGE. The activity was optimum at 40 °C and pH 7.0 and was stable at pH 5.0-8.0 and below 50 °C. It preferred p-nitrophenyl palmitate (C16), a long chain substrate; and K (m) and V (max) for the substrate were determined to be 0.24 mM and 4.6 mM/min mg, respectively. First 10 N-terminal amino acid sequences were APDLVALQSE, which are different from so far reported lipases. LP326 catalyzed biodiesel production using methanol and various oils; therefore, the enzyme can be applicable in the field of biofuel.     

Isolation and characterization of Shigella flexneri G3, capable of effective cellulosic saccharification under mesophilic conditions

A novel Shigella strain (Shigella flexneri G3) showing high cellulolytic activity under mesophilic, anaerobic conditions was isolated and characterized. The bacterium is Gram negative, short rod shaped, and nonmotile and displays effective production of glucose, cellobiose, and other oligosaccharides from cellulose (Avicel PH-101) under optimal conditions (40°C and pH 6.5). Approximately 75% of the cellulose was hydrolyzed in modified ATCC 1191 medium containing 0.3% cellulose, and the oligosaccharide production yield and specific production rate reached 375 mg g Avicel(-1) and 6.25 mg g Avicel(-1) h(-1), respectively, after a 60-hour incubation. To our knowledge, this represents the highest oligosaccharide yield and specific rate from cellulose for mesophilic bacterial monocultures reported so far. The results demonstrate that S. flexneri G3 is capable of rapid conversion of cellulose to oligosaccharides, with potential biofuel applications under mesophilic conditions.     

A novel thermostable xylanase of Paenibacillus macerans IIPSP3 isolated from the termite gut

Xylanase is an enzyme in high demand for various industrial applications, such as those in the biofuel and pulp and paper fields. In this study, xylanase-producing microbes were isolated from the gut of the wood-feeding termite at 50°C. The isolated microbe produced thermostable xylanase that was active over a broad range of temperatures (40-90°C) and pH (3.5-9.5), with optimum activity (4,170 ± 23.5 U mg?1) at 60°C and pH 4.5. The enzyme was purified using a strong cation exchanger and gel filtration chromatography, revealing that the protein has a molecular mass of 205 kDa and calculated pI of 5.38. The half-life of xylanase was 6 h at 60°C and 2 h at 90°C. The isolated thermostable xylanase differed from other xylanases reported to date in terms of size, structure, and mode of action. The novelty of this enzyme lies in its high specific activity and stability at broad ranges of temperature and pH. These properties suggest that this enzyme could be utilized in bioethanol production as well as in the paper and pulp industry.     

A novel, alkali-tolerant thermostable xylanase from Saccharomonospora viridis: direct gene cloning, expression and enzyme characterization

A xylanase gene, designated Svixyn10A, was cloned from actinomycetes Saccharomonospora viridis and the gene product was characterized. Gene Svixyn10A contains 1,374 bp and encodes a polypeptide of 457 amino acids composed of a glycoside hydrolase family 10 catalytic domain with a putative signal peptide, a short Gly-rich linker and a family 2 carbohydrate-binding module (CBM). The deduced amino acid sequence of SviXyn10A shared the highest identity (57 %) with a hypothetical xylanase from Streptomyces lividans TK24 (ZP_05528201). A recombinant His-tagged xylanase, SviXyn10A was expressed in Escherichia coli BL21 and purified. The optimum pH and temperature for SviXyn10A is 8.0 and 60 °C. Compared with thermophilic and mesophilic counterparts, SviXyn10A was more active at high temperatures, retaining >63 % of its maximum activity at 65-70 °C and ~40 % even at 80 °C. It had broad pH adaptability (>35 % activity at pH 5.0-11.0) and alkali-tolerance (>70 % activity after incubation at pH 8.0-11.0 for 1 h at 37 °C), and was highly thermostable (>75 % activity after incubation at 70 °C for 3 h at pH 8.0). It may be the first alkali-tolerant thermostable xylanase reported from Saccharomonospora. These favorable properties make SviXyn10A a good candidate for application in pulp and paper industries.     

High-temperature enzymatic breakdown of cellulose

Cellulose is an abundant and renewable biopolymer that can be used for biofuel generation; however, structural entrapment with other cell wall components hinders enzyme-substrate interactions, a key bottleneck for ethanol production. Biomass is routinely subjected to treatments that facilitate cellulase-cellulose contacts. Cellulases and glucosidases act by hydrolyzing glycosidic bonds of linear glucose β-1,4-linked polymers, producing glucose. Here we describe eight high-temperature-operating cellulases (TCel enzymes) identified from a survey of thermobacterial and archaeal genomes. Three TCel enzymes preferentially hydrolyzed soluble cellulose, while two preferred insoluble cellulose such as cotton linters and filter paper. TCel enzymes had temperature optima ranging from 85°C to 102°C. TCel enzymes were stable, retaining 80% of initial activity after 120 h at 85°C. Two modes of cellulose breakdown, i.e., with endo- and exo-acting glucanases, were detected, and with two-enzyme combinations at 85°C, synergistic cellulase activity was observed for some enzyme combinations.     

Effect of organic acids on the growth and fermentation of ethanologenic Escherichia coli LY01

Hemicellulose residues can be hydrolyzed into a sugar syrup using dilute mineral acids. Although this syrup represents a potential feedstock for biofuel production, toxic compounds generated during hydrolysis limit microbial metabolism. Escherichia coli LY01, an ethanologenic biocatalyst engineered to ferment the mixed sugars in hemicellulose syrups, has been tested for resistance to selected organic acids that are present in hemicellulose hydrolysates. Compounds tested include aromatic acids derived from lignin (ferulic, gallic, 4-hydroxybenzoic, syringic, and vanillic acids), acetic acid from the hydrolysis of acetylxylan, and others derived from sugar destruction (furoic, formic, levulinic, and caproic acids). Toxicity was related to hydrophobicity. Combinations of acids were roughly additive as inhibitors of cell growth. When tested at concentrations that inhibited growth by 80%, none appeared to strongly inhibit glycolysis and energy generation, or to disrupt membrane integrity. Toxicity was not markedly affected by inoculum size or incubation temperature. The toxicity of all acids except gallic acid was reduced by an increase in initial pH (from pH 6.0 to pH 7.0 to pH 8.0). Together, these results are consistent with the hypothesis that both aliphatic and mononuclear organic acids inhibit growth and ethanol production in LY01 by collapsing ion gradients and increasing internal anion concentrations.     

Dilute-sulfuric acid pretreatment of cattails for cellulose conversion

The use of aquatic plant cattails to produce biofuel will add value to land and reduce emissions of greenhouse gases by replacing petroleum products. Dilute-sulfuric acid pretreatment of cattails was studied using a Dionex accelerated solvent extractor (ASE) varying acid concentration (0.1-1%), treatment temperature (140-180 °C), and residence time (5-10 min). The highest total glucose yield for both the pretreatment and enzyme hydrolysis stages (97.1% of the cellulose) was reached at a temperature of 180 °C, a sulfuric acid concentration of 0.5%, and a time of 5 min. Cattails pretreated with 0.5% sulfuric acid are digestible with similar results at enzyme loadings above 15 FPU/g glucan. Glucose from cattails cellulose can be efficiently fermented to ethanol with an approximately 90% of the theoretical yield. The results in this study indicate that cattails are a promising source of feedstock for advanced renewable fuel production.     

Cloning, expression, and purification of a recombinant cold-adapted beta-galactosidase from antarctic bacterium Pseudoalteromonas sp. 22b

The gram-negative antarctic bacterium Pseudoalteromonas sp. 22b, isolated from the alimentary tract of krill Thyssanoessa macrura, synthesizes an intracellular cold-adapted beta-galactosidase. The gene encoding this beta-galactosidase has been PCR amplified, cloned, expressed in Escherichia coli, purified, and characterized. The enzyme is active as a homotetrameric protein, and each monomer consists of 1028 amino acid residues. The enzyme was purified to homogeneity (50% recovery of activity) by using the fast, two-step procedure, including affinity chromatography on PABTG-Sepharose. Enzymatic properties of the recombinant protein are identical to those of native Pseudoalteromonas sp. 22b beta-galactosidase. The enzyme is cold-adapted and at 10 degrees C retains 20% of maximum activity. The purified enzyme displayed maximum activity close to 40 degrees C and at pH of 6.0-8.0. PNPG was its preferred substrate (58% higher activity than against ONPG). The enzyme was particularly thermolabile, losing all activities within 10 min at 50 degrees C. The hydrolysis of lactose in a milk assay revealed that 90% of milk lactose was hydrolyzed during 6 h at 30 degrees C and during 28 h at 15 degrees C. Because of its attributes, the recombinant Pseudoalteromonas sp. 22b beta-galactosidase could be applied at refrigeration temperatures for production of lactose-reduced dairy products.     

Comparison of sulfuric and hydrochloric acids as catalysts in hydrolysis of Kappaphycus alvarezii (cottonii)

In this study, hydrolysis of marine algal biomass Kappaphhycus alvarezii using two different acid catalysts was examined with the goal of identifying optimal reaction conditions for the formation of sugars and by-products. K. alvarezii were hydrolyzed by autoclave using sulfuric acid or hydrochloric acid as catalyst with different acid concentrations (0.1-1.0 M), substrate concentrations (1.0-13.5%), hydrolysis time (10-90 min) and hydrolysis temperatures (100-130 (°)C). A difference in galactose, glucose, reducing sugar and total sugar content was observed under the different hydrolysis conditions. Different by-product compounds such as 5-hydroxymethylfurfural and levulinic acid were also observed under the different reaction conditions. The optimal conditions for hydrolysis were achieved at a sulfuric acid concentration, temperature and reaction time of 0.2 M, 130 °C and 15 min, respectively. These results may provide useful information for the development of more efficient systems for biofuel production from marine biomass.     

Purification and characterization of an intracellular lipase from pleopods of whiteleg shrimp (Litopenaeus vannamei)

An intracellular lipase present in the whiteleg shrimp Litopenaeus vannamei was detected in pleopods. The lipase from pleopods was purified and characterized by biochemical and kinetic parameters. Purified intracellular lipase has a molecular mass of 196kDa, the polypeptide is assembled by two monomers, 95.26 and 63.36kDa. The enzyme lacks glycosylation, and it has an isoelectric point of 5.0. The enzyme showed the highest activity at a temperature range of 30-40°C at pH 8.0-10.0. Activity was completely inhibited by tetrahydrolipstatin and diethyl p-nitrophenyl phosphate, suggesting that the intracellular lipase is a serine lipase. The lipase hydrolyzes short and long-chain triacylglycerides, as well as naphthol derivatives at comparable rates in contrast to other sources of lipases. Specific activity of 930U mg(-1) and 416.56U mg(-1) was measured using triolein and tristearin at pH 8.0 at 30°C as substrates, respectively. The lipase showed a K(M,app) of 41.03mM and k(cat)/K(M,app) ratio of 4.88 using MUF-butyrate as the substrate. The intracellular lipase described for shrimp has a potential role in hydrolysis of triacylglycerides stored as fat body, as has been shown in humans.     

Biofuel production from palm oil with supercritical alcohols: effects of the alcohol to oil molar ratios on the biofuel chemical composition and properties

Biofuel production from palm oil with supercritical methanol (SCM) and supercritical ethanol (SCE) at 400 °C and 15 MPa were evaluated. At the optimal alcohol to oil molar ratios of 12:1 and 18:1 for the SCM and SCE processes, respectively, the biofuel samples were synthesized in a 1.2-L reactor and the resulting biofuel was analyzed for the key properties including those for the diesel and biodiesel standard specifications. Biofuel samples derived from both the SCM and SCE processes could be used as an alternative fuel after slight improvement in their acid value and free glycerol content. The remarkable advantages of this novel process were: the additional fuel yield of approximately of 5% and 10% for SCM and SCE, respectively; the lower energy consumption for alcohol preheating, pumping and recovering than the biodiesel production with supercritical alcohols that use a high alcohol to oil molar ratio of 42:1.     

Biofuel alternatives to ethanol: pumping the microbial well

Engineered microorganisms are currently used for the production of food products, pharmaceuticals, ethanol fuel and more. Even so, the enormous potential of this technology has yet to be fully exploited. The need for sustainable sources of transportation fuels has generated a tremendous interest in technologies that enable biofuel production. Decades of work have produced a considerable knowledge-base for the physiology and pathway engineering of microbes, making microbial engineering an ideal strategy for producing biofuel. Although ethanol currently dominates the biofuel market, some of its inherent physical properties make it a less than ideal product. To highlight additional options, we review advances in microbial engineering for the production of other potential fuel molecules, using a variety of biosynthetic pathways.     

Alkaline xylanases from Bacillus mojavensis A21: Production and generation of xylooligosaccharides

Medium composition and culture conditions for the xylanases production by Bacillus mojavensis A21 were optimized using two statistical methods: Plackett-Burman design applied to find the key ingredients and conditions for the best yield of enzyme production and Box-Behnken design used to optimize the value of the four significant variables: barley bran, NaCl, agitation, and cultivation time. The optimal conditions for higher production of xylanases were barley bran 18.66g/l, NaCl 1.04g/l, speed of agitation 176rpm and cultivation time 34.08h. Under these conditions, the xylanase experimental yield (7.45U/ml) closely matched the yield predicted by the statistical model (7.23U/ml) with R(2)=0.98. The medium optimization resulted in a 6.83-fold increase in xylanase production compared to that of the initial medium. Best xylanase activity was observed at the temperature of 50°C and at pH 8.0. The enzyme retained more 96% of its activity after 24h at pH ranges from 7.0 to 90.0. The enzyme preserved more 80% of its initial activity after 60min of pre-incubation from 30°C to 60°C. The main hydrolysis products yielded from corncob extracted xylan were xylobiose and xylotriose, suggesting the good potential of strain A21 in xylooligosaccharides production.     

Novel bacterial isolate from Permian groundwater, capable of aggregating potential biofuel-producing microalga Nannochloropsis oceanica IMET1

Increasing petroleum costs and climate change have resulted in microalgae receiving attention as potential biofuel producers. Little information is available on the diversity and functions of bacterial communities associated with biofuel-producing algae. A potential biofuel-producing microalgal strain, Nannochloropsis oceanica IMET1, was grown in Permian groundwater. Changes in the bacterial community structure at three temperatures were monitored by two culture-independent methods, and culturable bacteria were characterized. After 9 days of incubation, N. oceanica IMET1 began to aggregate and precipitate in cultures grown at 30°C, whereas cells remained uniformly distributed at 15°C and 25°C. The bacterial communities in cultures at 30°C changed markedly. Some bacteria isolated only at 30°C were tested for their potential for aggregating microalgae. A novel bacterium designated HW001 showed a remarkable ability to aggregate N. oceanica IMET1, causing microalgal cells to aggregate after 3 days of incubation, while the total lipid content of the microalgal cells was not affected. Direct interaction of HW001 and N. oceanica is necessary for aggregation. HW001 can also aggregate the microalgae N. oceanica CT-1, Tetraselmis suecica, and T. chuii as well as the cyanobacterium Synechococcus WH8007. 16S rRNA gene sequence comparisons indicated the great novelty of this strain, which exhibited only 89% sequence similarity with any previously cultured bacteria. Specific primers targeted to HW001 revealed that the strain originated from the Permian groundwater. This study of the bacterial communities associated with potential biofuel-producing microalgae addresses a little-investigated area of microalgal biofuel research and provides a novel approach to harvest biofuel-producing microalgae by using the novel bacterium strain HW001.     

Purification and characterization of a fibrinolytic enzyme from Streptomyces sp. XZNUM 00004

A fibrinolytic enzyme (SFE1) from Streptomyces sp. XZNUM 00004 was purified to electrophoretic homogeneity with the methods including ammonium sulfate precipitation, polyacrylamide gel, DEAE-Sepharose Fast Flow anion exchange and gel-filtration chromatography. The molecular weight of SFE1 was estimated to be 20 kDa by SDS-PAGE, fibrin zymography, and gel filtration chromatography. The isoelectric point was 4.9. K (m) and V (max) values were 0.96 mg/ml and 181.8 unit/ml, respectively. It was very stable at pH 5.0-8.0 and below 65 °C. The optimum pH for enzyme activity was 7.8. The optimum temperature was 35 °C. The fibrinolytic activity of SFE1 was enhanced by Na(+), K(+), Mn(2+), Mg(2+), Zn(2+) and Co(2+). Conversely, Cu(2+) showed strong inhibition. Furthermore, the fibrinolytic activity was strongly inhibited by PMSF, and partly inhibited by EDTA and EGTA. SFE1 rapidly hydrolyzed the Aα-chain of fibrinogen, followed by the Bβ-chain and finally the γ-chain. The first 15 amino acids of the N-terminal sequence were APITLSQGHVDVVDI. Additionally, SFE1 directly digested fibrin and not by plasminogen activators in vitro. SFE1 can be further developed as a potential candidate for thrombolytic therapy.     

Production of a xylose-stimulated β-glucosidase and a cellulase-free thermostable xylanase by the thermophilic fungus Humicola brevis var. thermoidea under solid state fermentation

Humicola brevis var. thermoidea cultivated under solid state fermentation in wheat bran and water (1:2 w/v) was a good producer of β-glucosidase and xylanase. After optimization using response surface methodology the level of xylanase reached 5,791.2 ± 411.2 U g(-1), while β-glucosidase production was increased about 2.6-fold, reaching 20.7 ± 1.5 U g(-1). Cellulase levels were negligible. Biochemical characterization of H. brevis β-glucosidase and xylanase activities showed that they were stable in a wide pH range. Optimum pH for β-glucosidase and xylanase activities were 5.0 and 5.5, respectively, but the xylanase showed 80 % of maximal activity when assayed at pH 8.0. Both enzymes presented high thermal stability. The β-glucosidase maintained about 95 % of its activity after 26 h in water at 55 °C, with half-lives of 15.7 h at 60 °C and 5.1 h at 65 °C. The presence of xylose during heat treatment at 65 °C protected β-glucosidase against thermal inactivation. Xylanase maintained about 80 % of its activity after 200 h in water at 60 °C. Xylose stimulated β-glucosidase activity up to 1.7-fold, at 200 mmol L(-1). The notable features of both xylanase and β-glucosidase suggest that H. brevis crude culture extract may be useful to compose efficient enzymatic cocktails for lignocellulosic materials treatment or paper pulp biobleaching.     

Effects of temperature shifts on growth rate and lipid characteristics of Synechocystis sp. PCC6803 in a bench-top photobioreactor

Synechocystis sp. PCC6803 exhibited a high degree of variation in biomass and lipid production rates in response to temperature changes in a photobioreactor. Compared with an optimal temperature of 30-33°C, a higher temperature of 44°C and lower temperatures of 22°C and 18°C severely inhibited the specific growth rate (up to a 66% decrease), biomass production rate (up to a 71% decrease), nutrient utilization rates (up to a 77% decrease), and lipid production rate (up to a 80% decrease). Temperature stress triggered changes in the relative percentage of individual fatty acids (mainly for C16:0 and C18:3), and degree of unsaturation significantly changed: 0.87 at 30°C, 0.62 at 44°C, and 1.29 at 18°C. Although PCC6803 survived temperature stress and maintained its predominate position in the culture, it could not fully recover from long-term temperature stress. Thus, avoiding prolonged exposure to extreme temperature is crucial for using PCC6803 as feedstock for biofuel production.     

Cloning, expression and characterization of a lipase gene from the Candida antarctica ZJB09193 and its application in biosynthesis of vitamin A esters

Lipase is one of the most important industrial enzymes, which has been widely used in the preparation of food additives, cosmetics and pharmaceuticals industries. In order to obtain a large amount of lipase, the lipase gene from Candida antarctica ZJB09193 was cloned, and expressed in Pichia pastoris with the vector pPICZαA. Under the optimal conditions, the yield of recombinant lipase in the culture broth reached 3.0 g/L. After purification, the properties of recombinant lipase were studied: the optimum pH and temperature were pH 8.0 and 52°C, Ca(2+) activated the activity of lipase, and the apparent K(m) and V(max) values for p-nitrophenyl acetate were 0.34 mM and 7.36 μmol min(-1) mg(-1), respectively. Furthermore, the recombinant lipase was immobilized on pretreated textile for biosynthesis of vitamin A esters. In a system of n-hexane, 0.3 g immobilized recombinant lipase was used in the presence of 0.06 g vitamin A acetate and 0.55 mmol fatty acid (nine different fatty acids were tested). The yield of all vitamin A esters exceeded 78% in 7h at 30°C except using lactic acid and hexanoic acid as substrates. After optimization, the yield of vitamin A palmitate reached 87%. This study has the potential to be developed into industrial application.     

Effect of hypothermic temperatures on production of rabies virus glycoprotein by recombinant Drosophila melanogaster S2 cells cultured in suspension

Aiming at maximizing the production of transmembrane rabies virus glycoprotein (rRVGP), the influence of hypothermic temperature on a recombinant Drosophila melanogaster S2 cell culture in Sf-900II medium was investigated. Cell growth and rRVGP production were assessed at 4 culture temperatures in Schott flasks: 16, 20, 24 and 28°C. The maximum specific growth rates μ(max) were, respectively: 0.009, 0.019, 0.038 and 0.035h(-1), while the maximum rRVGP levels C(max)(rRVGP) were: 0.075, 2.973, 0.480 and 1.404mgL(-1). The best production temperature (20°C) was then tested in a bioreactor with control of pH and dissolved oxygen in batch and fed-batch modes. In the batch culture, μ(max) and C(max)(rRVGP) were 0.060h(-1) and 0.149mgL(-1) at 28°C and 0.026h(-1) and 0.354mgL(-1) at 20°C, respectively. One batch-culture experiment was carried out with adaptation of the cells by the temperature falling in steps from 20°C to 16°C, so that μ(max) fell from 0.023 to 0.013h(-1), while C(max)(rRVGP) was improved to 0.567mgL(-1). In the fed-batch mode at 20°C, μ(max) was 0.025h(-1) and C(max)(rRVGP) was 1.155mgL(-1). Taken together, these results indicate that the best strategy for optimized rRVGP production is the culture at hypothermic temperature of 20°C, when μ(max) is kept low and with feeding of limitant aminoacids.     

Isolation of a novel cutinase homolog with polyethylene terephthalate-degrading activity from leaf-branch compost by using a metagenomic approach

The gene encoding a cutinase homolog, LC-cutinase, was cloned from a fosmid library of a leaf-branch compost metagenome by functional screening using tributyrin agar plates. LC-cutinase shows the highest amino acid sequence identity of 59.7% to Thermomonospora curvata lipase. It also shows the 57.4% identity to Thermobifida fusca cutinase. When LC-cutinase without a putative signal peptide was secreted to the periplasm of Escherichia coli cells with the assistance of the pelB leader sequence, more than 50% of the recombinant protein, termed LC-cutinase*, was excreted into the extracellular medium. It was purified and characterized. LC-cutinase* hydrolyzed various fatty acid monoesters with acyl chain lengths of 2 to 18, with a preference for short-chain substrates (C(4) substrate at most) most optimally at pH 8.5 and 50°C, but could not hydrolyze olive oil. It lost activity with half-lives of 40 min at 70°C and 7 min at 80°C. LC-cutinase* had an ability to degrade poly(ε-caprolactone) and polyethylene terephthalate (PET). The specific PET-degrading activity of LC-cutinase* was determined to be 12 mg/h/mg of enzyme (2.7 mg/h/μkat of pNP-butyrate-degrading activity) at pH 8.0 and 50°C. This activity is higher than those of the bacterial and fungal cutinases reported thus far, suggesting that LC-cutinase* not only serves as a good model for understanding the molecular mechanism of PET-degrading enzyme but also is potentially applicable for surface modification and degradation of PET.