Mechanisms of HsSAS-6 assembly promoting centriole formation in human cells

SAS-6 proteins are thought to impart the ninefold symmetry of centrioles, but the mechanisms by which their assembly occurs within cells remain elusive. In this paper, we provide evidence that the N-terminal, coiled-coil, and C-terminal domains of HsSAS-6 are each required for procentriole formation in human cells. Moreover, the coiled coil is necessary and sufficient to mediate HsSAS-6 centrosomal targeting. High-resolution imaging reveals that GFP-tagged HsSAS-6 variants localize in a torus around the base of the parental centriole before S phase, perhaps indicative of an initial loading platform. Moreover, fluorescence recovery after photobleaching analysis demonstrates that HsSAS-6 is immobilized progressively at centrosomes during cell cycle progression. Using fluorescence correlation spectroscopy and three-dimensional stochastic optical reconstruction microscopy, we uncover that HsSAS-6 is present in the cytoplasm primarily as a homodimer and that its oligomerization into a ninefold symmetrical ring occurs at centrioles. Together, our findings lead us to propose a mechanism whereby HsSAS-6 homodimers are targeted to centrosomes where the local environment and high concentration of HsSAS-6 promote oligomerization, thus initiating procentriole formation.     

The de novo centriole assembly pathway in HeLa cells: cell cycle progression and centriole assembly/maturation

It has been reported that nontransformed mammalian cells become arrested during G1 in the absence of centrioles (Hinchcliffe, E., F. Miller, M. Cham, A. Khodjakov, and G. Sluder. 2001. Science. 291:1547-1550). Here, we show that removal of resident centrioles (by laser ablation or needle microsurgery) does not impede cell cycle progression in HeLa cells. HeLa cells born without centrosomes, later, assemble a variable number of centrioles de novo. Centriole assembly begins with the formation of small centrin aggregates that appear during the S phase. These, initially amorphous "precentrioles" become morphologically recognizable centrioles before mitosis. De novo-assembled centrioles mature (i.e., gain abilities to organize microtubules and replicate) in the next cell cycle. This maturation is not simply a time-dependent phenomenon, because de novo-formed centrioles do not mature if they are assembled in S phase-arrested cells. By selectively ablating only one centriole at a time, we find that the presence of a single centriole inhibits the assembly of additional centrioles, indicating that centrioles have an activity that suppresses the de novo pathway.     

Protein phosphatase 2A-SUR-6/B55 regulates centriole duplication in C. elegans by controlling the levels of centriole assembly factors

Centrioles play a crucial role in mitotic spindle assembly and duplicate precisely once per cell cycle. In worms, flies, and humans, centriole assembly is dependent upon a key regulatory kinase (ZYG-1/Sak/Plk4) and its downstream effectors SAS-5 and SAS-6. Here we report a role for protein phosphatase 2A (PP2A) in centriole duplication. We find that the PP2A catalytic subunit LET-92, the scaffolding subunit PAA-1, and the B55 regulatory subunit SUR-6 function together to positively regulate centriole assembly. In PP2A-SUR-6-depleted embryos, the levels of ZYG-1 and SAS-5 are reduced and the ZYG-1- and SAS-5-dependent recruitment of SAS-6 to the nascent centriole fails. We show that PP2A physically associates with SAS-5 in vivo and that inhibiting proteolysis can rescue SAS-5 levels and the centriole duplication defect of PP2A-depleted embryos. Together, our findings indicate that PP2A-SUR-6 promotes centriole assembly by protecting ZYG-1 and SAS-5 from degradation.     

Human microcephaly protein CEP135 binds to hSAS‐6 and CPAP,and is required for centriole assembly

Centrioles are cylindrical structures that are usually composed of nine triplets of microtubules (MTs) organized around a cartwheel‐shaped structure. Recent studies have proposed a structural model of the SAS‐6‐based cartwheel, yet we do not know the molecular detail of how the cartwheel participates in centriolar MT assembly. In this study, we demonstrate that the human microcephaly protein, CEP135, directly interacts with hSAS‐6 via its carboxyl‐terminus and with MTs via its amino‐terminus. Unexpectedly, CEP135 also interacts with another microcephaly protein CPAP via its amino terminal domain. Depletion of CEP135 not only perturbed the centriolar localization of CPAP, but also blocked CPAP‐induced centriole elongation. Furthermore, CEP135 depletion led to abnormal centriole structures with altered numbers of MT triplets and shorter centrioles. Overexpression of a CEP135 mutant lacking the proper interaction with hSAS‐6 had a dominant‐negative effect on centriole assembly. We propose that CEP135 may serve as a linker protein that directly connects the central hub protein, hSAS‐6, to the outer MTs, and suggest that this interaction stabilizes the proper cartwheel structure for further CPAP‐mediated centriole elongation.     

Cdc14B depletion leads to centriole amplification, and its overexpression prevents unscheduled centriole duplication

Centrosome duplication is tightly controlled in coordination with DNA replication. The molecular mechanism of centrosome duplication remains unclear. Previous studies found that a fraction of human proline-directed phosphatase Cdc14B associates with centrosomes. However, Cdc14B's involvement in centrosome cycle control has never been explored. Here, we show that depletion of Cdc14B by RNA interference leads to centriole amplification in both HeLa and normal human fibroblast BJ and MRC-5 cells. Induction of Cdc14B expression through a regulatable promoter significantly attenuates centriole amplification in prolonged S phase-arrested cells and proteasome inhibitor Z-L(3)VS-treated cells. This inhibitory function requires centriole-associated Cdc14B catalytic activity. Together, these results suggest a potential function for Cdc14B phosphatase in maintaining the fidelity of centrosome duplication cycle.     

Structure of complement C6 suggests a mechanism for initiation and unidirectional, sequential assembly of membrane attack complex (MAC)

The complement membrane attack complex (MAC) is formed by the sequential assembly of C5b with four homologous proteins as follows: one copy each of C6, C7, and C8 and 12-14 copies of C9. Together these form a lytic pore in bacterial membranes. C6 through C9 comprise a MAC-perforin domain flanked by 4-9 "auxiliary" domains. Here, we report the crystal structure of C6, the first and longest of the pore proteins to be recruited by C5b. Comparisons with the structures of the C8αβγ heterodimer and perforin show that the central domain of C6 adopts a "closed" (perforin-like) state that is distinct from the "open" conformations in C8. We further show that C6, C8α, and C8β contain three homologous subdomains ("upper," "lower," and "regulatory") related by rotations about two hinge points. In C6, the regulatory segment includes four auxiliary domains that stabilize the closed conformation, inhibiting release of membrane-inserting elements. In C8β, rotation of the regulatory segment is linked to an opening of the central β-sheet of its clockwise partner, C8α. Based on these observations, we propose a model for initiation and unidirectional propagation of the MAC in which the auxiliary domains play key roles: in the assembly of the C5b-8 initiation complex; in driving and regulating the opening of the β-sheet of the MAC-performin domain of each new recruit as it adds to the growing pore; and in stabilizing the final pore. Our model of the assembled pore resembles those of the cholesterol-dependent cytolysins but is distinct from that recently proposed for perforin.     

Expression, assembly, and processing of an active plant ferredoxin-NADP+ oxidoreductase and its precursor protein in Escherichia coli

The flavoprotein ferredoxin-NADP+ reductase (FNR) catalyzes the final step of the photosynthetic electron transport chain, i.e. the reduction of NADP+ by ferredoxin. A cloned FNR cDNA from a pea library (Newman, B., and Gray, J. (1988) Plant Mol. Biol. 10, 511-520) was used to construct plasmids which express the apoenzyme in Escherichia coli. Two recombinant vectors were prepared, one containing the sequence corresponding to the mature enzyme and another including, in addition, the sequence of the transit peptide that directs FNR to the chloroplast. These proteins were expressed as fusion products to the NH2-terminal portion of beta-galactosidase. In both cases, a 35-kDa immunoreactive polypeptide was the major product, suggesting that the proteins were processed in vivo. NH2-terminal sequence determination of the purified recombinant proteins indicate cleavage at positions -1/-2 with respect to the normal processing site in chloroplasts. The processed enzymes showed enzymatic activities and spectral properties that were similar or identical to those of native plant FNR. When a La protease-deficient E. coli strain was used as a host, the expressed FNR precursor was found to be poorly processed, associated to bacterial pellets, and showed no detectable FNR activity. The overall results indicate that acquisition of the native enzyme conformation and assembly of the prosthetic group takes place in the bacterial host, generating an enzyme that is, as far as studied, indistinguishable from plant FNR.     

Small nuclear ribonucleoprotein particle assembly in vivo: demonstration of a 6S RNA-free core precursor and posttranslational modification

The in vivo synthesis and assembly of human small nuclear ribonucleoproteins (snRNPs) have been studied using pulse/chase analysis. Antibodies derived from patients with systemic lupus erythematosus (SLE) and mixed connective tissue disease (MCTD) recognize distinguishable subsets of pulse-labeled snRNP peptides. These antibodies were used to immunoprecipitate sucrose gradient fractionated pulse-labeled and pulse/chased snRNP proteins. The results indicate that assembly of the U RNA-containing snRNPs is a multistep process involving prior assembly of an RNA-free 6S core particle. This precursor contains snRNP peptides D, E, F, and G, which are common to all the different U RNA-containing particles. Furthermore, a posttranslational modification of one of the U1 snRNP-specific peptides has been observed, and the kinetics of this process indicates that the modification occurs after particle assembly. Functional and structural implications of a protein core for snRNP particles are discussed.     

Spliceosome assembly in the absence of stable U4/U6 RNA pairing

The cycle of spliceosome assembly, intron excision, and spliceosome disassembly involves large-scale structural rearrangements of U6 snRNA that are functionally important. U6 enters the splicing pathway bound to the Prp24 protein, which chaperones annealing of U6 to U4 RNA to form a U4/U6 di-snRNP. During catalytic activation of the assembled spliceosome, U4 snRNP is released and U6 is paired to U2 snRNA. Here we show that point mutations in U4 and U6 that decrease U4/U6 base-pairing in vivo are lethal in combination. However, this synthetic phenotype is rescued by a mutation in U6 that alters a U6–Prp24 contact and stabilizes U2/U6. Remarkably, the resulting viable triple mutant strain lacks detectable U4/U6 base-pairing and U4/U6 di-snRNP. Instead, this strain accumulates free U4 snRNP, protein-free U6 RNA, and a novel complex containing U2/U6 di-snRNP. Further mutational analysis indicates that disruption of the U6–Prp24 interaction rather than stabilization of U2/U6 renders stable U4/U6 di-snRNP assembly nonessential. We propose that an essential function of U4/U6 pairing is to displace Prp24 from U6 RNA, and thus a destabilized U6–Prp24 complex renders stable U4/U6 pairing nonessential.     

SAS‐6 coiled‐coil structure and interaction with SAS‐5 suggest a regulatory mechanism in C. elegans centriole assembly

The centriole is a conserved microtubule‐based organelle essential for both centrosome formation and cilium biogenesis. Five conserved proteins for centriole duplication have been identified. Two of them, SAS‐5 and SAS‐6, physically interact with each other and are codependent for their targeting to procentrioles. However, it remains unclear how these two proteins interact at the molecular level. Here, we demonstrate that the short SAS‐5 C‐terminal domain (residues 390–404) specifically binds to a narrow central region (residues 275–288) of the SAS‐6 coiled coil. This was supported by the crystal structure of the SAS‐6 coiled‐coil domain (CCD), which, together with mutagenesis studies, indicated that the association is mediated by synergistic hydrophobic and electrostatic interactions. The crystal structure also shows a periodic charge pattern along the SAS‐6 CCD, which gives rise to an anti‐parallel tetramer. Overall, our findings establish the molecular basis of the specific interaction between SAS‐5 and SAS‐6, and suggest that both proteins individually adopt an oligomeric conformation that is disrupted upon the formation of the hetero‐complex to facilitate the correct assembly of the nine‐fold symmetric centriole.     

Cell cycle progression and de novo centriole assembly after centrosomal removal in untransformed human cells

How centrosome removal or perturbations of centrosomal proteins leads to G1 arrest in untransformed mammalian cells has been a mystery. We use microsurgery and laser ablation to remove the centrosome from two types of normal human cells. First, we find that the cells assemble centrioles de novo after centrosome removal; thus, this phenomenon is not restricted to transformed cells. Second, normal cells can progress through G1 in its entirety without centrioles. Therefore, the centrosome is not a necessary, integral part of the mechanisms that drive the cell cycle through G1 into S phase. Third, we provide evidence that centrosome loss is, functionally, a stress that can act additively with other stresses to arrest cells in G1 in a p38-dependent fashion.     

Plasticity, evolvability, and modularity in RNA

RNA folding from sequences into secondary structures is a simple yet powerful, biophysically grounded model of a genotype-phenotype map in which concepts like plasticity, evolvability, epistasis, and modularity can not only be precisely defined and statistically measured but also reveal simultaneous and profoundly non-independent effects of natural selection. Molecular plasticity is viewed here as the capacity of an RNA sequence to assume a variety of energetically favorable shapes by equilibrating among them at constant temperature. Through simulations based on experimental designs, we study the dynamics of a population of RNA molecules that evolve toward a predefined target shape in a constant environment. Each shape in the plastic repertoire of a sequence contributes to the overall fitness of the sequence in proportion to the time the sequence spends in that shape. Plasticity is costly, since the more shapes a sequence can assume, the less time it spends in any one of them. Unsurprisingly, selection leads to a reduction of plasticity (environmental canalization). The most striking observation, however, is the simultaneous slow-down and eventual halting of the evolutionary process. The reduction of plasticity entails genetic canalization, that is, a dramatic loss of variability (and hence a loss of evolvability) to the point of lock-in. The causal bridge between environmental canalization and genetic canalization is provided by a correlation between the set of shapes in the plastic repertoire of a sequence and the set of dominant (minimum free energy) shapes in its genetic neighborhood. This statistical property of the RNA genotype-phenotype map, which we call plastogenetic congruence, traps populations in regions where most genetic variation is phenotypically neutral. We call this phenomenon neutral confinement. Analytical models of neutral confinement, made tractable by the assumption of perfect plastogenetic congruence, formally connect mutation rate, the topography of phenotype space, and evolvability. These models identify three mutational regimes: that corresponding to neutral confinement, an exploration threshold corresponding to a breakdown of neutral confinement with the simultaneous persistence of the dominant phenotype, and a classic error threshold corresponding to the loss of the dominant phenotype. In a final step, we analyze the structural properties of canalized phenotypes. The reduction of plasticity leads to extreme modularity, which we analyze from several perspectives: thermophysical (melting--the RNA version of a norm of reaction), kinetic (folding pathways--the RNA version of development), and genetic (transposability--the insensitivity to genetic context). The model thereby suggests a possible evolutionary origin of modularity as a side effect of environmental canalization.     

Structural comparisons of meizothrombin and its precursor prothrombin in the presence or absence of procoagulant membranes.

A stable form of meizothrombin derived from an active-site (Ser528----Ala) mutant of recombinant bovine prothrombin [Pei et al. (1991) J. Biol. Chem. 266, 9598-9604] has been used to determine the physical properties and conformation of meizothrombin both in solution and when bound to a procoagulant membrane. As determined with quasi-elastic light scattering, meizothrombin and prothrombin had similar molecular dimensions normal to a membrane (9.4 +/- 1.0 nm) and similar binding affinities to procoagulant membranes (1.8 +/- 0.2 microM at 0.4 M NaCl). However, meizothrombin had a greater tendency to form oligomers or aggregates in solution. The enhanced oligomerization of meizothrombin was also evidenced by a high apparent z-weighted molecular weight in equilibrium sedimentation experiments at low spin speeds. However, velocity sedimentation experiments performed at high spin speeds demonstrated the same sedimentation coefficient for meizothrombin (s20,w(0) = 4.7 +/- 0.2 S) as for prothrombin (s20,w(0) = 4.7 +/- 0.15 S). Circular dichroism measurements revealed minor differences in protein secondary structure between meizothrombin and prothrombin either in the presence or in the absence of phospholipid membranes, as reflected in an increased theta 222/theta 208 ratio in meizothrombin relative to prothrombin. The main endotherm of the meizothrombin thermal denaturation profile in a Ca(2+)-containing buffer, as determined by differential scanning calorimetry, was indistinguishable from that of prothrombin. However, in the presence of phosphatidylserine-containing membranes, the peak temperatures of denaturation profiles of meizothrombin were distinct from those of prothrombin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Variation, plasticity and modularity in anuran development

Although anuran development is generally thought to be relatively conservative, a great deal of variation is evident when different species are compared. This report summarizes the results of comparative analyses of different aspects of anuran development. These include differences in sequence and timing of developmental events, the effects of genome size, and the effects of different life history strategies on anuran embryogenesis. The results show that anuran development is plastic at the evolutionary level, and many changes can occur in the developmental processes of anurans throughout their evolution. Changes are apparently rapid, and are as common as cladogenic events. This evolutionary plasticity can be attributed to the modular nature of anuran development. Different modules can shift relative to one another in time or in space, creating variations in the observed developmental patterns. However, shifts in modules can occur even without having a significant effect on the ultimate outcome of the process. I discuss the implications of the modular nature of development on the evolution of anuran development, and of the group in general.     

Determinate growth and modularity in a gorgonian octocoral

Growth rates of branches of colonies of the gorgonian Pseudopterogorgia elisabethae were monitored for 2 years on a reef at San Salvador Island, Bahamas. Images of 261 colonies were made at 6-month intervals and colony and branch growth analyzed. Branch growth rates differed between colonies and between the time intervals in which the measurements were made. Colonies developed a plumelike morphology through a pattern of branch origination and determinate growth in which branch growth rates were greatest at the time the branch originated and branches seldom grew beyond a length of 8 cm. A small number of branches had greater growth rates, did not stop growing, and were sites for the origination of subsequent "generations" of branches. The rate of branch origination decreased with each generation of branching, and branch growth rates were lower on larger colonies, leading to determinate colony growth. Although colonial invertebrates like P. elisabethae grow through the addition of polyps, branches behave as modules with determinate growth. Colony form and size is generated by the iterative addition of branches.     

Identification of a soluble precursor complex essential for nuclear pore assembly in vitro

We analysed the soluble form in which the nuclear pore complex protein p68 is stored in Xenopus laevis eggs and its involvement in pore complex assembly processes. We have shown previously that p68, which is the major wheat germ agglutinin (WGA)-binding glycoprotein of nuclear pore complexes from Xenopus oocytes, is located in the pore channel and participates in mediated transport of karyophilic proteins. Using a monoclonal antibody directed against p68 (PI1) we removed this protein from Xenopus egg extract by immunoadsorption. On addition of lambda DNA the immunodepleted extract supported reconstitution of nuclei which were surrounded by a continuous double-membrane envelope but lacked pore complexes and were unable to import karyophilic proteins such as nucleoplasmin or lamin L_III. Essentially identical results were obtained with extract depleted of WGA-binding proteins. Our finding that both the anti-p68 antibody and WGA efficiently removed components from the extract necessary for pore complex assembly but did not interfere with nuclear membrane formation demonstrates that these processes are independent of each other. Analysis of the immunoprecipitate on silver-stained SDS-polyacrylamide gels indicated that the antibody adsorbed other proteins besides p68, notably two high molecular weight components. By sucrose gradient centrifugation and gel filtration we showed that p68 together with associated protein(s) forms a stable, approximately globular complex plex with an M_r of 254,000, a Stokes radius of 5.2 nm and a sedimentation coefficient of 11.3 S. Our finding that p68 occurs in the form of larger macromolecular assemblies offers an explanation for the distinctly punctate immunofluorescence pattern observed in the cytoplasm of mitotic cells after staining with antibodies to p68.W. Hennig