Molecular dynamics simulations of the hydrophobin SC3 at a hydrophobic/hydrophilic interface

Hydrophobins are small ( approximately 100 aa) proteins that have an important role in the growth and development of mycelial fungi. They are surface active and, after secretion by the fungi, self-assemble into amphipathic membranes at hydrophobic/hydrophilic interfaces, reversing the hydrophobicity of the surface. In this study, molecular dynamics simulation techniques have been used to model the process by which a specific class I hydrophobin, SC3, binds to a range of hydrophobic/hydrophilic interfaces. The structure of SC3 used in this investigation was modeled based on the crystal structure of the class II hydrophobin HFBII using the assumption that the disulfide pairings of the eight conserved cysteine residues are maintained. The proposed model for SC3 in aqueous solution is compact and globular containing primarily beta-strand and coil structures. The behavior of this model of SC3 was investigated at an air/water, an oil/water, and a hydrophobic solid/water interface. It was found that SC3 preferentially binds to the interfaces via the loop region between the third and fourth cysteine residues and that binding is associated with an increase in alpha-helix formation in qualitative agreement with experiment. Based on a combination of the available experiment data and the current simulation studies, we propose a possible model for SC3 self-assembly on a hydrophobic solid/water interface.     

Structural and functional role of the disulfide bridges in the hydrophobin SC3

Hydrophobins function in fungal development by self-assembly at hydrophobic-hydrophilic interfaces such as the interface between the fungal cell wall and the air or a hydrophobic solid. These proteins contain eight conserved cysteine residues that form four disulfide bonds. To study the effect of the disulfide bridges on the self-assembly, the disulfides of the SC3 hydrophobin were reduced with 1,4-dithiothreitol. The free thiols were then blocked with either iodoacetic acid (IAA) or iodoacetamide (IAM), introducing eight or zero negative charges, respectively. Circular dichroism and infrared spectroscopy showed that after opening of the disulfide bridges SC3 is initially unfolded. IAA-SC3 did not self-assemble at the air-water interface upon shaking an aqueous solution. Remarkably, after drying down IAA-SC3 or after exposing it to Teflon, it refolded into a structure similar to that observed for native SC3 at these interfaces. Iodoacetamide-SC3 on the other hand, which does not contain extra charges, spontaneously refolded in water in the amyloid-like beta-sheet conformation, characteristic for SC3 assembled at the water-air interface. From this we conclude that the disulfide bridges of SC3 are not directly involved in self-assembly but keep hydrophobin monomers soluble in the fungal cell or its aqueous environment, preventing premature self-assembly.     

Spontaneous self-assembly of SC3 hydrophobins into nanorods in aqueous solution

Hydrophobins are small surface active proteins secreted by filamentous fungi. Because of their ability to self-assemble at hydrophilic-hydrophobic interfaces, hydrophobins play a key role in fungal growth and development. In the present work, the organization in aqueous solution of SC3 hydrophobins from the fungus Schizophyllum commune was assessed using Dynamic Light Scattering, Atomic Force Microscopy and fluorescence spectroscopy. These complementary approaches have demonstrated that SC3 hydrophobins are able not only to spontaneously self-assemble at the air-water interface but also in pure water. AFM experiments evidenced that hydrophobins self-assemble in solution into nanorods. Fluorescence assays with thioflavin T allowed establishing that the mechanism governing SC3 hydrophobin self-assembly into nanorods involves β-sheet stacking. SC3 assembly was shown to be strongly influenced by ionic strength and solution pH. The presence of a very low ionic strength significantly favoured the protein self-assembly but a further increase of ions in solution disrupted the protein assembly. It was assessed that solution pH had a significant effect on the SC3 hydrophobins organization. In peculiar, the self-assembly process was considerably reduced at acidic pH. Our findings demonstrate that the self-assembly of SC3 hydrophobins into nanorods of well-defined length can be directly controlled in solution. Such control allows opening the way for the development of new smart self-assembled structures for targeted applications.     

Structural characterization of the hydrophobin SC3, as a monomer and after self-assembly at hydrophobic/hydrophilic interfaces.

Hydrophobins are small fungal proteins that self-assemble at hydrophilic/hydrophobic interfaces into amphipathic membranes that, in the case of Class I hydrophobins, can be disassembled only by treatment with agents like pure trifluoroacetic acid. Here we characterize, by spectroscopic techniques, the structural changes that occur upon assembly at an air/water interface and upon assembly on a hydrophobic solid surface, and the influence of deglycosylation on these events. We determined that the hydrophobin SC3 from Schizophyllum commune contains 16-22 O-linked mannose residues, probably attached to the N-terminal part of the peptide chain. Scanning force microscopy revealed that SC3 adsorbs specifically to a hydrophobic surface and cannot be removed by heating at 100 degrees C in 2% sodium dodecyl sulfate. Attenuated total reflection Fourier transform infrared spectroscopy and circular dichroism spectroscopy revealed that the monomeric, water-soluble form of the protein is rich in beta-sheet structure and that the amount of beta-sheet is increased after self-assembly on a water-air interface. Alpha-helix is induced specifically upon assembly of the protein on a hydrophobic solid. We propose a model for the formation of rodlets, which may be induced by dehydration and a conformational change of the glycosylated part of the protein, resulting in the formation of an amphipathic alpha-helix that forms an anchor for binding to a substrate. The assembly in the beta-sheet form seems to be involved in lowering of the surface tension, a potential function of hydrophobins.     

Heat treatment of bovine alpha-lactalbumin results in partially folded, disulfide bond shuffled states with enhanced surface activity

Prolonged heating of holo bovine alpha-lactalbumin (BLA) at 80 degrees C in pH 7 phosphate buffer in the absence of a thiol initiator improves the surface activity of the protein at the air:water interface, as determined by surface tension measurements. Samples after 30, 60, and 120 min of heating were analyzed on cooling to room temperature. Size-exclusion chromatography shows sample heterogeneity that increases with the length of heating. After 120 min of heating monomeric, dimeric, and oligomeric forms of BLA are present, with aggregates formed from disulfide bond linked hydrolyzed protein fragments. NMR characterization at pH 7 in the presence of Ca2+ of the monomer species isolated from the sample heated for 120 min showed that it consisted of a mixture of refolded native protein and partially folded protein and that the partially folded protein species had spectral characteristics similar to those of the pH 2 molten globule state of the protein. Circular dichroism spectroscopy showed that the non-native species had approximately 40% of the alpha-helical content of the native state, but lacked persistent tertiary interactions. Proteomic analysis using thermolysin digestion of three predominant non-native monomeric forms isolated by high-pressure liquid chromatography indicated the presence of disulfide shuffled isomers, containing the non-native 61-73 disulfide bond. These partially folded, disulfide shuffled species are largely responsible for the pronounced improvement in surface activity of the protein on heating.     

Interactions of lens proteins. Self-association and mixed-association studies of bovine alpha-crystallin and gamma-crystallin

Concentrated solutions of calf alpha-crystallin (up to 45 g/l) and gamma-crystallin (up to 67 g/l) were subjected to frontal exclusion chromatography at pH 7.3, ionic strength 0.17 and 20 degrees C. The experimental concentration dependence of the weight-average partition coefficient was compared with theoretical expressions, which include considerations of thermodynamic non-ideality effects, for the concentration dependence of a single solute and of a solute undergoing reversible self-association. Two types of association pattern were examined, discrete dimerization and indefinite self-association. The partition chromatography results are consistent with an indefinite self-association of gamma-crystallin, governed by an isodesmic association constant of 6.7 X 10(-3) l/g. alpha-Crystallin appears to self-associate either very weakly, with a maximal association constant of 0.9 X 10(-3) l/g, or not at all; the distinction depends on the assessment of the non-ideality coefficients. The consequences of excluded volume effects on these self-association equilibria at high total protein concentration are discussed. Mixtures of alpha-crystallin and gamma-crystallin were analyzed by frontal exclusion chromatography (up to 14 g/l) and sedimentation velocity (up to 115 g/l): no interaction was observed.     

Solution effects on the self-association of a water-soluble peptoid

A desire to replicate the structural and functional complexity of proteins with structured, sequence-specific oligomers motivates study of the structural features of water-soluble peptoids (N-substituted glycine oligomers). Understanding the molecular-level details of peptoid self-assembly in water is essential to advance peptoids' application as novel materials. Peptoid 1 , an amphiphilic, putatively helical peptoid previously studied in our laboratory, shows evidence of self-association in aqueous solution. In this work, we evaluate how changes to aqueous solution conditions influence the self-association of 1 . We report that changes to pH influence the fluorescence and CD spectroscopic features as well as the peptoid's interaction with a solvatochromic fluorophore and its apparent size as estimated by size exclusion chromatography. Addition of guanidine hydrochloride and ammonium sulfate also modulate spectroscopic features of the peptoid, its interaction with a solvatochromic fluorophore, and its elution in size exclusion chromatography. These data suggest that the ordering of the self-assembly changes in response to pH and with solvent additives and is more ordered at higher pH and in the presence of guanidine hydrochloride. The deeper understanding of the self-association of 1 afforded by these studies informs the design of new stimuli-responsive peptoids with stable tertiary or quaternary structures.     

BLOC-1, a novel complex containing the pallidin and muted proteins involved in the biogenesis of melanosomes and platelet-dense granules

Recent studies have led to the identification of a group of genes required for normal biogenesis of lysosome-related organelles such as melanosomes and platelet-dense granules. Two of these genes, which are defective in the pallid and muted mutant mouse strains, encode small, coiled-coil-forming proteins that display no homology to each other or to any known protein. We report that these two proteins, pallidin and muted, are components of a novel protein complex. We raised antibodies that allow for detection of pallidin from a wide variety of mammalian cells. Endogenous pallidin was distributed in both soluble and peripheral membrane protein fractions. Size-exclusion chromatography and sedimentation velocity analyses indicated that the bulk of cytosolic pallidin is a component of an asymmetric protein complex with a molecular mass of approximately 200 kDa. We named this complex BLOC-1 (for biogenesis of lysosome-related organelles complex 1). Steady-state pallidin protein levels were reduced in fibroblasts derived from muted and reduced pigmentation mice, suggesting that the genes defective in these two mutant strains could encode components of BLOC-1 that are required for pallidin stability. Co-immunoprecipitation and immunodepletion experiments using an antibody to muted confirmed that this protein is a subunit of BLOC-1. Yeast two-hybrid analyses revealed that pallidin is capable of self-association through a region that contains its two coiled-coil forming domains. Unlike AP-3-deficient pearl fibroblasts, which display defects in intracellular zinc storage, zinc distribution was not noticeably affected in pallid or muted fibroblasts. Interestingly, immunofluorescence and in vitro binding experiments demonstrated that pallidin/BLOC-1 is able to associate with actin filaments. We propose that BLOC-1 mediates the biogenesis of lysosome-related organelles by a mechanism that may involve self-assembly and interaction with the actin cytoskeleton.     

How a fungus escapes the water to grow into the air

Fungi are well known to the casual observer for producing water-repelling aerial moulds and elaborate fruiting bodies such as mushrooms and polypores. Filamentous fungi colonize moist substrates (such as wood) and have to breach the water-air interface to grow into the air. Animals and plants breach this interface by mechanical force. Here, we show that a filamentous fungus such as Schizophyllum commune first has to reduce the water surface tension before its hyphae can escape the aqueous phase to form aerial structures such as aerial hyphae or fruiting bodies. The large drop in surface tension (from 72 to 24 mJ m-2) results from self-assembly of a secreted hydrophobin (SC3) into a stable amphipathic protein film at the water-air interface. Other, but not all, surface-active molecules (that is, other class I hydrophobins and streptofactin from Streptomyces tendae) can substitute for SC3 in the medium. This demonstrates that hydrophobins not only have a function at the hyphal surface but also at the medium-air interface, which explains why fungi secrete large amounts of hydrophobin into their aqueous surroundings.     

Interfacial self-assembly of a hydrophobin into an amphipathic protein membrane mediates fungal attachment to hydrophobic surfaces.

The SC3p hydrophobin of Schizophyllum commune is a small hydrophobic protein (100-101 amino acids with eight cysteine residues) that self-assembles at a water/air interface and coats aerial hyphae with an SDS-insoluble protein membrane, at the outer side highly hydrophobic and with a typical rodlet pattern. SC3p monomers in water also self-assemble at the interfaces between water and oils or hydrophobic solids. These materials are then coated with a 10 nm thick SDS-insoluble assemblage of SC3p making their surfaces hydrophilic. Hyphae of S. commune growing on a Teflon surface became firmly attached and SC3p was shown to be present between the fungal cell wall and the Teflon. Decreased attachment of hyphae to Teflon was observed in strains not expressing SC3, i.e. a strain containing a targeted mutation in this gene and a regulatory mutant thn. These findings indicate that hydrophobins, in addition to forming hydrophobic wall coatings, play a role in adherence of fungal hyphae to hydrophobic surfaces.     

Interactions of FliJ with the Salmonella type III flagellar export apparatus

FliJ, a 17-kDa protein, is a soluble component of the Salmonella type III flagellar protein export system that has antiaggregation properties and several other characteristics that suggest it may have a chaperone-like function. We have now examined this protein in detail. Ten-amino-acid scanning deletions covering the entire 147-amino-acid sequence were tested for complementation of a fliJ null strain; only the first and last deletions complemented. A few of the deletions, especially towards the C terminus, exerted a dominant negative effect on wild-type cells, indicating that they were actively interfering with function. Two truncated versions of FliJ, representing its N- and C-terminal halves, failed to complement and were not dominant. We tested for FliJ self-association by several techniques. Size-exclusion chromatography (Superdex 200) indicated an apparent molecular mass of around 50 kDa, which could reflect either multimerization or an elongated shape or both. Multiangle light scattering gave a peak value of 20 kDa, close to the molecular mass of the monomer. Analytical ultracentrifugation gave evidence for weak self-association as a trimer or tetramer. It was known from previous studies that FliJ interacts with the N-terminal region of FliH, a negative regulator of the ATPase FliI. Using both truncation and deletion versions of FliJ, we now show that it is its C-terminal region that is responsible for this interaction. We also show that FliJ interacts with the soluble cytoplasmic domain of the largest membrane component of the export apparatus, FlhA; although small deletions in FliJ did not interfere with the association, both truncated versions failed to associate, indicating that a substantial amount of the central region of the FliJ sequence participates in the association. We present a model summarizing these multiple interactions.     

Interactions of hydrophobin proteins in solution studied by small-angle X-ray scattering

Hydrophobins are a group of very surface-active, fungal proteins known to self-assemble on various hydrophobic/hydrophilic interfaces. The self-assembled films coat fungal structures and mediate their attachment to surfaces. Hydrophobins are also soluble in water. Here, the association of hydrophobins HFBI and HFBII from Trichoderma reesei in aqueous solution was studied using small-angle x-ray scattering. Both HFBI and HFBII exist mainly as tetramers in solution in the concentration range 0.5-10 mg/ml. The assemblies of HFBII dissociate more easily than those of HFBI, which can tolerate changes of pH from 3 to 9 and temperatures in the range 5°C-60°C. The self-association of HFBI and HFBII is mainly driven by the hydrophobic effect, and addition of salts along the Hofmeister series promotes the formation of larger assemblies, whereas ethanol breaks the tetramers into monomers. The possibility that the oligomers in solution form the building blocks of the self-assembled film at the air/water interface is discussed.     

A thermodynamic model for the self-association of human spectrin

The self-association of human spectrin at 28.8 degrees C in 0.11 M salt (pH 7.5) has been studied by means of sedimentation equilibrium. Coincidence of omega function plots as a function of total spectrin concentration (0-2 g/L) indicated that equilibrium was achieved and that no significant concentration of solute was incapable of participating in the self-association reaction. On the basis of the root-mean-square deviation of the fits and the randomness of the residuals, the behavior can be described equally well, either by a cooperative isodesmic model, in which K12 approximately 2 x 10(6) M-1 and all other K approximately 10(6) M-1, or by an attenuated scheme in which K(i-1)i approximately (3.5 x 10(6)/i M-1. The returned values of the second virial coefficient, B, for both these models fall within the range calculated from the charge and Stokes radius of spectrin. A mechanism for spectrin self-association consistent with both schemes is proposed in which spectrin heterodimers undergo a reversible opening at the self-association interface. These open heterodimers then undergo indefinite self-association to form a series of open-chain oligomers in dynamic equilibrium with closed-loop oligomers.     

Studies on human serum high-density lipoproteins. Self-association of human serum apolipoprotein A-II in aqueous solutions.

Some of the solution properties of pure preparations of human serum high-density apolipoprotein A-II were studied by sedimentation equilibrium ultracentrifugation, conducted at different apoprotein concentrations and at several speeds. The concentration dependence of the apparent weight average molecular weight indicated that apolipoprotein A-II, when dissolved in 0.02 MEDTA (pH 8.6), undergoes self-association. Over a protein concentration range between 0.8 and 1.5 mg/ml, the self-association could best be described by a monomer-dimer-trimer step association, although indefinite self-association could not be ruled out. The equilibrium constants obtained were sufficient to describe the system over the concentration range investigated.     

Aspects of the molecular structure and dynamics of neuropeptide Y.

Human neuropeptide Y (hNPY) and the Q34-->P34 mutant (P34-hNPY) have been characterized by CD spectroscopy. hNPY self-associates in aqueous solution with a dimerization constant in the micromolar range. The self-association correlates with an increase in secondary-structure content which was studied as a function of concentration, temperature and pH. The effects of temperature were measured in water (5-84 degrees C) and in ethanediol/water (2 : 1) (-90 degrees to +90 degrees C). A single-residue mutation, Q34-->P34, affects the pH, thermal and self-association properties of NPY. The CD results are correlated with photochemically induced dynamic nuclear polarization NMR experiments which show that the tyrosines at the interface between two monomer units present limited accessibility to a photoreactive dye. An equilibrium state is described, involving a PP-fold monomer form and a handshake dimer form, that accommodates the physicochemical properties of NPY.     

The Elimination of DNA from the Cry Toxin-DNA Complex Is a Necessary Step in the Mode of Action of the Cry8 Toxin

Several crystal (Cry) proteins are known to occur as DNA-protein complexes. However, the role of the DNA associated with the activated toxin in the mechanism of action of the Cry toxin has long been ignored. Here, we focused on the DNA-activated Cry toxin complex. Both forms of the Cry8Ca2 and Cry8Ea1 toxins, i.e., with or without bound DNA, were separately obtained. Size-exclusion chromatography analysis indicated that the Cry8Ca2 toxin-DNA complex has a tight or compact structure. The Cry8Ca2 toxin-DNA complex is more likely to move toward the air/water interface and is more hydrophobic than the toxin without DNA. Competitive binding assays indicated that the Cry8Ca2 and Cry8Ea1 toxins without DNA specifically bind to the midgut of Anomala corpulenta and Holotrichia parallela larvae, respectively. In contrast, the association of DNA with each toxin might result in the nonspecific recognition of the Cry toxin and its target receptor in the insect midgut. The association of the DNA fragment with the Cry8 toxin was shown to protect the Cry protein from digestion by proteases. Based on our results, we propose an additional step in the mechanism of action of the Cry8 toxin and elucidate the function of the associated DNA as well as the importance of the removal of this DNA for the insecticidal activity of the toxin.     

Purification and characterization of the Thermus thermophilus HB8 RecX protein

The RecA protein plays a central role in homologous recombination by promoting strand exchange between ssDNA and homologous dsDNA. Since RecA alone can advance this reaction in vitro, it is widely used in gene manipulation techniques. The RecX protein downregulates the function of RecA, indicating that it could be used as an inhibitor to control the activities of RecA in vitro. In this study, the RecX protein of the hyper-thermophilic bacterium Thermus thermophilus (ttRecX) was over-expressed in Escherichia coli and purified by heat treatment and several column chromatography steps. Size-exclusion chromatography indicated that purified ttRecX exists as a monomer in solution. Circular dichroism measurements indicated that the alpha-helical content of ttRecX is 54% and that it is stable up to 80 degrees C at neutral pH. In addition, ttRecX inhibited the DNA-dependent ATPase activity of the T. thermophilus RecA protein (ttRecA). The stable ttRecX may be applicable for variety of techniques using the ttRecA reaction.     

Characterization of HIV-1 p24 self-association using analytical affinity chromatography.

Analytical affinity chromatography (AAC) was used to detect and quantitate the self-association of p24gag, the major structural capsid protein of human immunodeficiency virus (HIV-1). p24gag was immobilized on a hydrophilic polymer (methacrylate) chromatographic support. The resulting affinity column was able to interact with soluble p24, as judged by the chromatographic retardation of the soluble protein upon isocratic elution under nonchaotropic binding conditions. The variation of elution volume with soluble protein concentration fit to a monomer-dimer model for self-association. The soluble p24-immobilized p24 association process was observed using both frontal and zonal elution AAC at varying pH values; the dissociation constant was 3-4 x 10(-5) M at pH 7. That p24 monomer associates to dimers was determined in solution using analytical ultracentrifugation. The solution Kd was 1.3 x 10(-5) M at pH 7. AAC in the zonal elution mode provides a simple and rapid means to screen for other HIV-1 macromolecules that may interact with p24 as well as for modulators, including antagonists, of HIV p24 protein assembly.     

Studies on human serum high density lipoproteins. Self-association of apolipoprotein A-I in aqueous solutions.

Human serum apolipoprotein A-I (apo-A-I), the major protein component of the human serum high density lipoproteins, was studied in aqueous solutions of differing ionic strength and pH by the techniques of sedimentation equilibrium ultracentrifugation and frontal analysis gel chromatography. The ultracentrifugal studies indicate the apo-A-I is a self-associating system that is dependent upon protein concentration, but relatively independent of the nature of the medium. The apparent weight average molecular weights obtained from solutions of initial apo-A-I concentration between 0.2 and 0.9 mg/ml were in the range of 3.0 to 16.7 x 10(4) (monomer molecular weight = 28,014). Of the several models of self-associated examined, that which gave the best theoretical fit was for the monomer-dimertetramer-octamer model. The self-association of apo-A-I in aqueous solutions was further documented by frontal analysis gel chromatography, which not only corroborated the ultracentrifugal results, but also indicated that the multiple species of apo-A-I in solution attain equilibrium rather rapidly. Besides having intrinsic importance, these results indicate that the solution properties of apo-A-I must be established before ligand binding studies are conducted and interpreted.     

Molecular dynamics study of the folding of hydrophobin SC3 at a hydrophilic/hydrophobic interface

Hydrophobins are fungal proteins that self-assemble at hydrophilic/hydrophobic interfaces into amphipathic membranes. These assemblages are extremely stable and posses the remarkable ability to invert the polarity of the surface on which they are adsorbed. Neither the three-dimensional structure of a hydrophobin nor the mechanism by which they function is known. Nevertheless, there are experimental indications that the self-assembled form of the hydrophobins SC3 and EAS at a water/air interface is rich with beta-sheet secondary structure. In this paper we report results from molecular dynamics simulations, showing that fully extended SC3 undergoes fast (approximately 100 ns) folding at a water/hexane interface to an elongated planar structure with extensive beta-sheet secondary elements. Simulations in each of the bulk solvents result in a mainly unstructured globular protein. The dramatic enhancement in secondary structure, whether kinetic or thermodynamic in origin, highlights the role interfaces between phases with large differences in polarity can have on folding. The partitioning of the residue side-chains to one of the two phases can serve as a strong driving force to initiate secondary structure formation. The interactions of the side-chains with the environment at an interface can also stabilize configurations that otherwise would not occur in a homogenous solution.