Orally active achiral N-hydroxyformamide inhibitors of ADAM-TS4 (aggrecanase-1) and ADAM-TS5 (aggrecanase-2) for the treatment of osteoarthritis

A new achiral class of N-hydroxyformamide inhibitor of both ADAM-TS4 and ADAM-TS5, 2 has been discovered through modification of the complex P1 group present in historical inhibitors 1. This structural change improved the DMPK properties and greatly simplified the synthesis whilst maintaining excellent cross-MMP selectivity profiles. Investigation of structure-activity and structure-property relationships in the P1 group resulted in both ADAM-TS4 selective and mixed ADAM-TS4/5 inhibitors. This led to the identification of a pre-clinical candidate with excellent bioavailability across three species and predicting once daily dosing kinetics.     

Potent, selective, and orally bioavailable matrix metalloproteinase-13 inhibitors for the treatment of osteoarthritis

Modification of -biphenylsulfonamidocarboxylic acids led to potent and selective MMP-13 inhibitors. Compound 16 showed 100% oral bioavailability in rats and demonstrated >50% inhibition of bovine cartilage degradation at 10 ng/mL.     

A systematic computational analysis of human matrix metalloproteinase 13 (MMP-13) crystal structures and structure-based identification of prospective drug candidates as MMP-13 inhibitors repurposable for osteoarthritis

Abstract

Osteoarthritis (OA) is the most common form of arthritis with no available disease-modifying treatments, and is a major cause of disability. Matrix metalloproteinase 13 (MMP-13) is vital for OA progression and thus, inhibition of MMP-13 is an effective strategy to treat OA. Since the past few decades, drug repurposing has gained substantial popularity worldwide as a time- and cost-effective approach to find new indications for the existing drugs. Therefore, more than 40 X-ray co-crystal structures of the human MMP-13 with bound inhibitors are investigated to gain the structural insights such as conserved direct interactions with binding site residues, namely Ala-238, Thr-245 and Thr-247. Afterwards, enrichment study using active and decoy set of ligands revealed three MMP-13 structures (PDB-IDs: 1XUC, 3WV1 and 5BPA) with optimal enrichment performance. Docking-based screening of existing drugs against the three crystal structures followed by binding free-energy calculation suggested drugs namely eltrombopag, cilostazol and domperidone as potential MMP-13 inhibitors that need further experimental validation. These insights may serve as a potential starting point of further experimental validation and structure-based drug design/repurposing of MMP-13 inhibitors for the treatment of OA. Abbreviations 2D two-dimensional

3D three-dimensional

FDA Food and Drug Administration

MM-GBSA Molecular Mechanics Generalized Born Surface Area

MMPs matrix metalloproteinases

MMP-13 matrix metalloproteinase 13

NMR nuclear magnetic resonance

OA osteoarthritis

PDB Protein Data Bank

PDB-ID Protein Data Bank ID

PLIP protein–ligand interaction profiler

ROC receiver operating characteristic,

RMSD root mean square deviation

Communicated by Ramaswamy H. Sarma     

Design,synthesis, and biological activity of novel,potent, and highly selective fused pyrimidine-2-carboxamide-4-one-based matrix metalloproteinase (MMP)-13 zinc-binding inhibitors

Matrix metalloproteinase-13 (MMP-13), a member of the collagenase family of enzymes, has been implicated to play a key role in the pathology of osteoarthritis. Recently, we have reported the discovery of a series of quinazoline-2-carboxamide based non-zinc-binding MMP-13 selective inhibitors, as exemplified by compound 1. We then continued our research of a novel class of zinc-binding inhibitors to obtain follow-up compounds with different physicochemical, pharmacokinetic, and biological activity profiles. In order to design selective MMP-13 inhibitors, we adopted a strategy of connecting a zinc-binding group with the quinazoline-2-carboxamide system, a unique S1′ binder, by an appropriate linker. Among synthesized compounds, a triazolone inhibitor 35 exhibited excellent potency (IC₅₀ = 0.071 nM) and selectivity (greater than 170-fold) over other MMPs (MMP-1, 2, 3, 7, 8, 9, 10, 12, and 14) and tumor necrosis factor-α converting enzyme (TACE). In this article, the design, synthesis, and biological activity of novel zinc-binding MMP-13 inhibitors are described.     

Rational design and synthesis of novel thiazolidin-4-ones as non-nucleoside HIV-1 reverse transcriptase inhibitors

A series of novel thiazolidin-4-one analogues, characterized by different substitution patterns at positions C-2 and N-3 of the thiazolidin-4-one scaffold for anti-HIV-1 activity has been investigated. Most of the compounds showed anti-HIV-1 activity at micromolar concentrations when tested in TZM-bl cells in vitro. Among the thirty-three compounds tested, compound 16 was the most potent inhibitor of HIV-1 replication against HIV-1_IIIB, HIV-1_ADA5, HIV-1_UG070 and HIV-1_VB59 (EC₅₀ = 0.02, 0.08, 0.08 and 0.08 μM, respectively) with selectivity index (SI = 6940, 1735, 1692 and 1692) against tested viral strains, respectively. The results of the present study suggested that the substitution of the nitro group at 6′ position of the C-2 phenyl ring and 4,6-dimethylpyridin-2-yl at the N-3 position of thiazolidin-4-one had a major impact on the anti-HIV-1 activity and was found to lower cytotoxicity. The substitution of the heteroaryl ring with bromo group and bicyclic heteroaryl ring at N-3 thiazolidin-4-one was found to lower anti-HIV-1 activity and increase cytotoxicity. The undertaken docking studies thus facilitated the identification of crucial interactions between the HIV-1 RT enzyme and thiazolidin-4-one inhibitors, which can be used to design new potential inhibitors.     

Binding pocket-based design,synthesis and biological evaluation of novel selective BRD4-BD1 inhibitors

Bromodomain-containing protein 4 (BRD4), consisting of two tandem bromodomains (BD1 and BD2), is key epigenetic regulator in fibrosis and cancer, which has been reported that BD1 and BD2 have distinct roles in post-translational modification. But there are few selective inhibitors toward those two domains. Herein, this study designed and synthesized a series of novel selective BRD4-BD1 inhibitors, using computer-aided drug design (CADD) approach focused on exploring the difference of the binding pockets of BD1 and BD2, and finding the His437 a crucial way to achieve BRD4-BD1 selectivity. Our results revealed that the compound 3u is a potent selective BRD4-BD1 inhibitor with IC₅₀ values of 0.56?μM for BD1 but >100?μM for BD2. The compound exhibited a broad spectrum of anti-proliferative activity against several human cancer and fibroblastic cell lines, which might be related to its capability of reducing the expression of c-Myc and collagen I. Furthermore, it could induce apoptosis in A375 cells. To the contrary, the selective BD2 inhibitor, RVX-208, did not indicate any of these activities. Our findings highlight that the function of BRD4-BD1 might be predominant in fibrosis and cancer. And it is rational to further develop novel selective BRD4-BD1 inhibitors.     

Continued exploration of biphenylsulfonamide scaffold as a platform for aggrecanase-1 inhibition

Design, synthesis and structure-activity relationship of a series of biphenylsulfonamido-3-methylbutanoic acid based aggrecanase-1 inhibitors are described. In addition to robust aggrecanase-1 inhibition, these compounds also exhibit potent MMP-13 activity. In cell-based cartilage explants assay compound 48 produced 87% inhibition of proteoglycan degradation at 10 μg/mL. Good pharmacokinetic properties were demonstrated by 46 with a half-life of 6h and bioavailability of 23%.     

Discovery of potent,selective, bioavailable phosphodiesterase 2 (PDE2) inhibitors active in an osteoarthritis pain model,Part I: Transformation of selective pyrazolodiazepinone phosphodiesterase 4 (PDE4) inhibitors into selective PDE2 inhibitors

We identified potent, selective PDE2 inhibitors by optimizing residual PDE2 activity in a series of PDE4 inhibitors, while simultaneously minimizing PDE4 activity. These newly designed PDE2 inhibitors bind to the PDE2 enzyme in a cGMP-like mode in contrast to the cAMP-like binding mode found in PDE4. Structure activity relationship studies coupled with an inhibitor bound crystal structure in the active site of the catalytic domain of PDE2 identified structural features required to minimize PDE4 inhibition while simultaneously maximizing PDE2 inhibition.     

Structural modeling of osteoarthritis ADAMTS4 complex with its cognate inhibitory protein TIMP3 and rational derivation of cyclic peptide inhibitors from the complex interface to target ADAMTS4

The ADAMTS4 (a disintegrin and metalloproteinase with thrombospondin motifs 4) enzyme is a matrix-associated zinc metalloendopeptidase that plays an essential role in the degradation of cartilage aggrecan in arthritic diseases and has been recognized as one of the most primary targets for therapeutic intervention in osteoarthritis (OA). Here, we reported computational modeling of the atomic-level complex structure of ADAMTS4 with its cognate inhibitory protein TIMP3 based on high-resolution crystal template. By systematically examining the modeled complex structure we successfully identified a short inhibitory loop (⁶²EASESLC⁶⁸) in TIMP3 N-terminal inhibitory domain (NID) that directly participates in blocking the enzyme’s active site, which, and its extended versions, were then broken from the full-length protein to serve as the peptide inhibitor candidates of ADAMTS4. Atomistic molecular dynamics simulation, binding energetic analysis, and fluorescence-based assay revealed that the TIMP3-derived linear peptides can only bind weakly to the enzyme (K_d = 74 ± 8 μM), which would incur a considerable entropy penalty due to the high conformational flexibility and intrinsic disorder of these linear peptides. In this respect, we proposed a cyclization strategy to improve enzyme–peptide binding affinity by, instead of traditionally maximizing enthalpy contribution, minimizing entropy cost of the binding, where a disulfide bond was added across the two terminal residues of linear peptides, resulting in a number of TIMP3-derived cyclic peptides. Our studies confirmed that the cyclization, as might be expected, can promote peptide binding capability against ADAMTS4 substantially, with affinity increase by 3-fold, 9-fold and 7-fold for cyclic peptides

,

and

, respectively.     

Effects of covalently attached chondroitin sulfate on aggrecan cleavage by ADAMTS-4 and MMP-13

Aggrecan is degraded by several aggrecanase-1 (ADAMTS-4) isoforms differing in the number of sulfated glycosaminoglycan (sGAG)-binding motifs. ADAMTS-4 and MMPs cleave aggrecan more efficiently within the chondroitin sulfate (CS)-rich region than the interglobular domain (IGD). We investigated the influence of CS on aggrecan core protein cleavage by ADAMTS-4 (p68) and (p40) as well as MMP-13, which has no recognizable GAG-binding sites. Chondroitinase ABC-treated cartilage aggrecan was cleaved with ADAMTS-4 (p68) less efficiently than CS-substituted aggrecan within the CS-2 domain. Keratanase-treated aggrecan exhibited reduced IGD cleavage, but when both CS and KS were removed, the IGD cleavage was restored. This result suggests that KS in the IGD may compete with CS for ADAMTS-4 (p68) binding. In the absence of KS, however, p68 binding was shifted to the CS-2 domain. CS-deficient full-length recombinant aggrecan (rbAgg) was produced by chondroitinase ABC treatment, or by expression in the xylosyltransferase-deficient CHO-pgsA745 cell line. When digested with the ADAMTS-4 (p68), each of these preparations exhibited reduced CS-2 domain cleavage compared to CS-substituted CHO-K1 cell-derived aggrecan. Additionally, CS-deficient rbAgg showed increased IGD scission prior to cleavage within the CS-2 domain. ADAMTS-4 (p40) readily cleaved both rbAggs within the IGD, but cleaved poorly within the CS-2 domain, indicating little CS dependence. MMP-13, in contrast, cleaved the CS region and the IGD of both CS-substituted and CS-deficient rbAgg equally well. These data indicate that covalently bound CS enhances ADAMTS-4-mediated cleavage within the CS-rich region. MMP-13 also cleaves preferentially within the CS-region, but by an apparently CS-independent mechanism.     

Rational design,synthesis and biological profiling of new KDM4C inhibitors

The human histone demethylases of the KDM4 family have been related to diseases such as prostate and breast cancer. Majority of currently known inhibitors suffer from the low permeability and low selectivity between the enzyme isoforms. In this study, toxoflavin motif was used to design and synthesize new KDM4C inhibitors with improved biological activity and in vitro ADME properties. Inhibitors displayed good passive cellular permeability and metabolic stability. However, diminishing of redox liability and consequently non-specific influence on cell viability still remains a challenge.     

The design and synthesis of novel inhibitors of NADH:ubiquinone oxidoreductase

Potent new inhibitors of NADH:ubiquinone oxidoreductase (complex I) have been designed, with the help of molecular modelling, by hybridisation of known complex I inhibitors with inhibitors of cytochrome c oxidoreductase. The most interesting compound was the chromone 7 which was a selective inhibitor of complex I (IC(50) 15 nM) and showed acaricidal activity against spider mites.     

Discovery and synthesis of novel 4-aminopyrrolopyrimidine Tie-2 kinase inhibitors for the treatment of solid tumors

The synthesis and biological evaluation of novel Tie-2 kinase inhibitors are presented. Based on the pyrrolopyrimidine chemotype, several new series are described, including the benzimidazole series by linking a benzimidazole to the C5-position of the 4-amino-pyrrolopyrimidine core and the ketophenyl series synthesized by incorporating a ketophenyl group to the C5-position. Medicinal chemistry efforts led to potent Tie-2 inhibitors. Compound 15, a ketophenyl pyrrolopyrimidine urea analog with improved physicochemical properties, demonstrated favorable in vitro attributes as well as dose responsive and robust oral tumor growth inhibition in animal models.     

The design and synthesis of novel alpha-ketoamide-based p38 MAP kinase inhibitors

We have identified a novel series of potent p38 MAP kinase inhibitors through structure-based design which due to their extended molecular architecture bind, in addition to the ATP site, to an allosteric pocket. In vitro ADME and in vivo PK studies show these compounds to have drug-like characteristics which could result in the development of an oral treatment for inflammatory conditions.     

Design,synthesis and biological evaluation of novel pyrimidinedione derivatives as DPP-4 inhibitors

A series of novel pyrimidinedione derivatives were designed and evaluated for in vitro dipeptidyl peptidase-4 (DPP-4) inhibitory activity and in vivo anti-hyperglycemic efficacy. Among them, the representative compounds 11, 15 and 16 showed excellent inhibitory activity of DPP-4 with IC₅₀ values of 64.47?nM, 188.7?nM and 65.36?nM, respectively. Further studies revealed that compound 11 was potent in vivo hypoglycemic effect. The structure–activity relationships of these pyrimidinedione derivatives had been discussed, which would be useful for developing novel DPP-4 inhibitors as treating type 2 diabetes.     

Design,synthesis and preliminary biological evaluation of 4-aminopyrazole derivatives as novel and potent JAKs inhibitors

JAKs inhibitors were widely applied in the treatment of immunodeficiency diseases, inflammation and cancers. We designed and synthesized a novel series of 4-aminopyrazole derivatives, which showed inhibitory potency against various JAKs. The in vitro protein kinase inhibition experiment indicated that compounds 17k, 17l, 17m and 17n could inhibit JAKs effectively. Among them, compound 17m possessed the highest protein kinase inhibitory rates (%) at 10 μM, which were 97, 96 and 100 to JAK1, JAK2 and JAK3, respectively. Further evaluation revealed that the IC₅₀ values of 17m against JAK1, JAK2 and JAK3 were 0.67 μM, 0.098 μM and 0.039 μM, respectively. Moreover, western blotting results showed compound 17m could inhibit the phosphorylation of JAK2 in Hela cells effectively. The data supports the further investigation of these compounds as novel JAKs inhibitors.     

The design, synthesis and structure-activity relationships of novel isoindoline-based histone deacetylase inhibitors

The design, synthesis and biological evaluation of a novel series of isoindoline-based hydroxamates is described. Several analogs were shown to inhibit HDAC1 with IC₅₀ values in the low nanomolar range and inhibit cellular proliferation of HCT116 human colon cancer cells in the sub-micromolar range. The cellular potency of compound 17e was found to have greater in vitro anti-proliferative activity than several compounds in late stage clinical trials for the treatment of cancer. The in vitro safety profiles of selected compounds were assessed and shown to be suitable for further lead optimization.     

The design and synthesis of novel spirocyclic heterocyclic sulfone ROMK inhibitors as diuretics

A spirocyclic class of ROMK inhibitors was developed containing a structurally diverse heterocyclic sulfone moiety and spirocyclic core starting from lead 1. These compounds not only displayed exquisite ROMK potency but significantly improved selectivity over hERG. The lead compounds were found to have favorable pharmacokinetic properties and displayed robust diuretic, natriuretic and blood pressure lowering effects in spontaneously hypertensive rats.     

The green synthesis and molecular docking of novel N-substituted rhodanines as effective inhibitors for carbonic anhydrase and acetylcholinesterase enzymes

Recently, inhibition effects of enzymes such as acetylcholinesterase (AChE) and carbonic anhydrase (CA) has appeared as a promising approach for pharmacological intervention in a variety of disorders such as epilepsy, Alzheimer’s disease and obesity. For this purpose, novel N-substituted rhodanine derivatives (RhAs) were synthesized by a green synthetic approach over one-pot reaction. Following synthesis the novel compounds, RhAs derivatives were tested against AChE and cytosolic carbonic anhydrase I, and II (hCAs I, and II) isoforms. As a result of this study, inhibition constant (Ki) were found in the range of 66.35 ± 8.35 to 141.92 ± 12.63 nM for AChE, 43.55 ± 14.20 to 89.44 ± 24.77 nM for hCA I, and 16.97 ± 1.42 to 64.57 ± 13.27 nM for hCA II, respectively. Binding energies were calculated with docking studies as −5.969, −5.981, and −9.121 kcal/mol for hCA I, hCA II, and AChE, respectively.