石墨烯及其衍生物氧化石墨烯作为新型药物载体材料在肿瘤治疗领域的应用研究

石墨烯及其衍生物氧化石墨烯因具有水溶性好、比表面积大、载药量高以及易于修饰等优势,近年来在生物医药领域尤其在肿瘤治 疗领域的应用研究发展迅速。综述石墨烯及氧化石墨烯作为新型药物载体材料所具有的特性和生物安全性、表面修饰方式以及在肿瘤靶向 递药系统中的应用,为其在生物医药领域的应用研究提供新方法和新思路。     

Graphene nanosheet reinforcement of polyurethane nanocomposite for green and sustainable photoluminescence,superhydrophobic, and anticorrosive paint

A simple and environmentally friendly method was developed for smart and efficient waterborne polyurethane (PUR) paint. Sugarcane bagasse was recycled into reduced graphene oxide nanosheets (rGONSs). Both lanthanide-doped aluminate nanoparticles (LAN; photoluminescent agent, 7–9 nm) and rGONSs (reinforcement agent) were integrated into a waterborne polyurethane to produce a novel photoluminescent, hydrophobic, and anticorrosive nanocomposite coating. Using ferrocene-based oxidation under masked circumstances, graphene oxide nanosheets were produced from sugarcane bagasse. The oxidized semicarbazide (SCB) nanostructures were integrated into polyurethane coatings as a drying, anticorrosion, and crosslinking agent. Polyurethane coatings with varying amounts of phosphor pigment were prepared and subsequently applied to mild steel. The produced paints (LAN/rGONSs@PUR) were tested for their hydrophobicity, hardness, and scratch resistance. Commission Internationale de l'éclairage (CIE) Laboratory parameters and photoluminescence analysis established the opacity and colourimetric properties of the nanocomposite coatings. When excited at 365 nm, the luminescent transparent paints emitted a strong greenish light at 517 nm. The anticorrosion characteristics of the coated steel were investigated. The phosphor-containing (11% w/w) polyurethane coatings displayed the most pronounced anticorrosion capability and long-persistent luminosity. The prepared waterborne polyurethane paints were very photostable and durable.     

Graphene‐Based Materials for Solar Cell Applications

Graphene has attracted increasing attention due to its unique electrical, optical, optoelectronic, and mechanical properties, which have opened up huge numbers of opportunities for applications. An overview of the recent research on graphene and its derivatives is presented, with a particular focus on synthesis, properties, and applications in solar cells.     

Electrochemically Synthesized Polypyrrole/Graphene Composite Film for Lithium Batteries

A polypyrrole/reduced graphene oxide (PPy/r‐GO) composite film is prepared by inducing electrochemical reduction of graphene oxide incorporated into PPy as the dopant. This film has a wrinkled surface morphology with a porous structure as revealed by scanning electron microscopy. Its porous structure is attributed to the physical nature of the GO sheets, providing a templating effect during PPy deposition. This PPy/r‐GO composite is characterized using in‐situ UV–visible spectroelectrochemistry as well as Raman and Fourier‐transform IR spectroscopy. The PPy/r‐GO material shows greatly improved electrochemical properties, i.e., a high rate capability and excellent cycling stability when used as a cathode material in a lithium ion battery. It also delivers a large reversible capacity when used as an anode material, and this is mainly attributed to the reduced graphene oxide (r‐GO) component.     

Theoretical study of chemisorption of cyanuric fluoride and S-triazine on the surface of Al-doped graphene

We studied the adsorption of cyanuric fluoride (CF) and s-triazine (ST) molecules on the surface of pristine as well as Al-doped graphenes using density functional theory calculations. Our results reveal low adsorption on the surface of pristine graphene; but by modification of surface using aluminium, resulted Al-doped graphene becomes more reactive towards both CF and ST molecules. We aimed to focus on the adsorption energy, electronic structure, charge analysis, density of state and global indices of each system upon adsorption of CF and ST molecules on the above-mentioned surfaces. Our calculated adsorption energies for the most stable position configurations of CF and ST on Al-doped graphene were ?76.53 kJ mol^?1 (?57.45 kJ mol^?1 BSSE corrected energy) and ?115.55 kJ mol^?1 (?86.87 kJ mol^?1 BSSE corrected energy), respectively, which point to the chemisorption process. For each CF and ST molecule, upon adsorption on the surface of Al-doped graphene, the band gap of HOMO-LUMO was reduced considerably and it becomes a p-type semiconductor, whereas there is no hybridisation between the above-mentioned molecules and pristine graphene.     

Large‐Area,Ultrathin Inorganic Network Coverages–Graphene Hierarchical Electrodes for Flexible,Heat‐Resistant Energy Storage Application

Graphene and quasi‐2D graphene‐like materials with an ultrathin thickness have been investigated as a new class of nanoscale materials due to their distinctive properties. A novel “molecular tools‐assistances” strategy is developed to fabricate two kinds of graphene‐based electrodes, ultrathin Fe‐doped MnO₂ network coverage–graphene composites (G‐MFO) and ultrathin MoS₂ network coverage–graphene composites (G‐MoS₂) with special hierarchical structures. Such structures enable a large contact interface between the active materials and graphene and thus fully exploit the synergistic effect from both the high specific capacitance of MFO or MoS₂ and the superb conductivity of graphene. Benefiting from their unique structural features, G‐MFO and G‐MoS₂ films directly use as free‐standing electrodes for flexible asymmetric supercapacitors with a nonaqueous gel electrolyte. The device achieves a high energy/power density, superior flexibility, good rate capability as well as outstanding performance stability even at a high temperature. This work represents a promising prototype to design new generation of hybrid supercapacitors for future energy storage devices.     

Facile Synthesis of 3D MnO2–Graphene and Carbon Nanotube–Graphene Composite Networks for High‐Performance,Flexible, All‐Solid‐State Asymmetric Supercapacitors

The integration of graphene nanosheets on the macroscopic level using a self‐assembly method has been recognized as one of the most effective strategies to realize the practical applications of graphene materials. Here, a facile and scalable method is developed to synthesis two types of graphene‐based networks, manganese dioxide (MnO₂)–graphene foam and carbon nanotube (CNT)–graphene foam, by solution casting and subsequent electrochemical methods. Their practical applications in flexible all‐solid‐state asymmetric supercapacitors are explored. The proposed method facilitates the structural integration of graphene foam and the electroactive material and offers several advantages including simplicity, efficiency, low‐temperature, and low‐cost. The as‐prepared MnO₂–graphene and CNT–graphene electrodes exhibit high specific capacitances and rate capability. By using polymer gel electrolytes, a flexible all‐solid‐state asymmetric supercapacitor was synthesized with MnO₂–graphene foam as the positive electrode and CNT‐graphene as the negative electrode. The asymmetric supercapacitors can be cycled reversibly in a high‐voltage region of 0 to 1.8 V and exhibit high energy density, remarkable rate capability, reasonable cycling performance, and excellent flexibility.     

Electronic,transport, magnetic,and optical properties of graphene nanoribbons and their optical sensing applications: A comprehensive review

Low dimensional materials have attracted great research interest from both theoretical and experimental point of views. These materials exhibit novel physical and chemical properties due to the confinement effect in low dimensions. The experimental observations of graphene open a new platform to study the physical properties of materials restricted to two dimensions. This featured article provides a review on the novel properties of quasi one-dimensional (1D) material known as graphene nanoribbon. Graphene nanoribbons can be obtained by unzipping carbon nanotubes (CNT) or cutting the graphene sheet. Alternatively, it is also called the finite termination of graphene edges. It gives rise to different edge geometries, namely zigzag and armchair, among others. There are various physical and chemical techniques to realize these materials. Depending on the edge type termination, these are called the zigzag and armchair graphene nanoribbons (ZGNR and AGNR). These edges play an important role in controlling the properties of graphene nanoribbons. The present review article provides an overview of the electronic, transport, optical, and magnetic properties of graphene nanoribbons. However, there are different ways to tune these properties for device applications. Here, some of them, such as external perturbations and chemical modifications, are highlighted. Few applications of graphene nanoribbon have also been briefly discussed.     

Chemically Exfoliating Biomass into a Graphene‐like Porous Active Carbon with Rational Pore Structure,Good Conductivity,and Large Surface Area for High‐Performance Supercapacitors

Active carbons have unique physicochemical properties, but their conductivities and surface to weight ratios are much poorer than graphene. A unique and facile method is innovated to chemically process biomass by “drilling” holes with H₂O₂ and exfoliating into graphene‐like nanosheets with HAc, followed by carbonization at a high temperature for highly graphitized activated carbon with greatly enhanced porosity, unique pore structure, high conductivity, and large surface area. This graphene‐like carbon exhibits extremely high specific capacitance (340 F g^?1 at 0.5 A g^?1) and high specific energy density (23.33 to 16.67 W h kg^?1) with excellent rate capability and long cycling stability (remains 98% after 10 000 cycles), which is much superior to all reported carbons including graphene. Synthesis mechanism for deriving biomass into porous graphene‐like carbons is discussed in detail. The enhancement mechanism for the porous graphene‐like carbon electrode reveals that rationally designed meso‐ and macropores are very critical in porous electrode performance, which can network micropores for diffusion freeways, high conductivity, and high utilization. This work has universal significance in producing highly porous and conductive carbons from biomass including biowastes for various energy storage/conversion applications.     

Anomalous Charge‐Extraction Behavior for Graphene‐Oxide (GO) and Reduced Graphene‐Oxide (rGO) Films as Efficient p‐Contact Layers for High‐Performance Perovskite Solar Cells

Reduced graphene oxides (rGO) are synthesized via reduction of GO with reducing agents as a hole‐extraction layer for high‐performance inverted planar heterojunction perovskite solar cells. The best efficiencies of power conversion (PCE) of these rGO cells exceed 16%, much greater than those made of GO and poly(3,4‐ethenedioxythiophene):poly(styrenesulfonate) films. A flexible rGO device shows PCE 13.8% and maintains 70% of its initial performance over 150 bending cycles. It is found that the hole‐extraction period is much smaller for the GO/methylammonium lead‐iodide perovskite (PSK) film than for the other rGO/PSK films, which contradicts their device performances. Photoluminescence and transient photoelectric decays are measured and control experiments are performed to prove that the reduction of the oxygen‐containing groups in GO significantly decreases the ability of hole extraction from PSK to rGO and also retards the charge recombination at the rGO/PSK interface. When the hole injection from PSK to GO occurs rapidly, hole propagation from GO to the indium‐doped tin oxide (ITO) substrate becomes a bottleneck to overcome, which leads to a rapid charge recombination that decreases the performance of the GO device relative to the rGO device.     

Highly Doped 3D Graphene Na‐Ion Battery Anode by Laser Scribing Polyimide Films in Nitrogen Ambient

Conventional graphite anodes can hardly intercalate sodium (Na) ions, which poses a serious challenge for developing Na‐ion batteries. This study details a novel method that involves single‐step laser‐based transformation of urea‐containing polyimide into an expanded 3D graphene anode, with simultaneous doping of high concentrations of nitrogen (≈13 at%). The versatile nature of this laser‐scribing approach enables direct bonding of the 3D graphene anode to the current collectors without the need for binders or conductive additives, which presents a clear advantage over chemical or hydrothermal methods. It is shown that these conductive and expanded 3D graphene structures perform exceptionally well as anodes for Na‐ion batteries. Specifically, an initial coulombic efficiency (CE) up to 74% is achieved, which exceeds that of most reported carbonaceous anodes, such as hard carbon and soft carbon. In addition, Na‐ion capacity up to 425 mAh g^?1 at 0.1 A g^?1 has been achieved with excellent rate capabilities. Further, a capacity of 148 mAh g^?1 at a current density of 10 A g^?1 is obtained with excellent cycling stability, opening a new direction for the fabrication of 3D graphene anodes directly on current collectors for metal ion battery anodes as well as other potential applications.     

Scalable,Self‐Aligned Printing of Flexible Graphene Micro‐Supercapacitors

Graphene micro‐supercapacitors (MSCs) are an attractive energy storage technology for powering miniaturized portable electronics. Despite considerable advances in recent years, device fabrication typically requires conventional microfabrication techniques, limiting the translation to cost‐effective and high‐throughput production. To address this issue, we report here a self‐aligned printing process utilizing capillary action of liquid inks in microfluidic channels to realize scalable, high‐fidelity manufacturing of graphene MSCs. Microstructured ink receivers and capillary channels are imprinted on plastic substrates and filled by inkjet printing of functional materials into the receivers. The liquid inks move under capillary flow into the adjoining channels, allowing reliable patterning of electronic materials in complex structures with greatly relaxed printing tolerance. Leveraging this process with pristine graphene and ion gel inks, miniaturized all‐solid‐state graphene MSCs are demonstrated to concurrently achieve outstanding resolution (active footprint: <1 mm², minimum feature size: 20 µm) and yield (44/44 devices), while maintaining a high specific capacitance (268 µF cm^–2) and robust stability to extended cycling and bending, establishing an effective route to scale down device size while scaling up production throughput.     

Microstructure,morphology and physicochemical properties of nanocomposites containing hydroxyapatite/vivianite/graphene oxide for biomedical applications

Designing a nanocomposite that accumulates biocompatibility and antimicrobial behaviour is an essential requirement for biomedical applications. Hydroxyapatite (HAP), graphene oxide, and vivianite in one ternary nanocomposite with three phases and shapes led to an increase in cell viability to 97.6% ± 4 for the osteoblast cells in vitro. The obtained nanocomposites were investigated for their structural features using X-ray diffraction, while the microstructure features were analyzed using a scanning electron microscope (SEM) and a transmission electron microscope. The analysis showed a decrease in the crystal size to 13 nm, while the HAP grains reached 30 nm. The elongated shape of vivianite reached 200 nm on SEM micrographs. The monoclinic and hexagonal crystal systems of HAP and vivianite were presented in the ternary nanocomposite. The maximum roughness peak height reached 236.1 nm for the ternary nanocomposite from 203.3 nm, while the maximum height of the roughness parameter reached 440.7 nm for the di-nanocomposite of HAP/graphene oxide from 419.7 nm. The corrosion current density reached 0.004 μA/cm². The ferrous (Fe²⁺) and calcium (Ca²⁺) ions released were measured and confirmed. Therefore, the morphology of the nanocomposites affected bacterial activity. This was estimated as an inhibition zone and reached 14.5 ± 0.9 and 13.4 ± 1.1 mm for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) after 24 h. The increase in viability and the antibacterial activity refer to the compatibility of the nanocomposite in different medical applications.     

Graphene Quantum Dots‐Based Advanced Electrode Materials: Design,Synthesis and Their Applications in Electrochemical Energy Storage and Electrocatalysis

Graphene quantum dots (GQDs) have aroused great interest in the scientific community in recent years due to their unique physicochemical properties and potential applications in different fields. To date, much research has been conducted on the ingenious design and rational construction of GQDs‐based nanomaterials used as electrode materials and/or electrocatalysts. Despite these efforts, research on the efficient synthesis and application of GQDs‐based nanomaterials is still in the early stages of development and timely updates of recent research progress on new design concepts, synthetic strategies, and significant breakthroughs in GQDs‐based nanomaterials are highly desired. In light of the above, the effect of synthetic methods on the final product of the GQDs, the GQDs synthesis mechanism, and specific perspectives regarding the effect of the unique surface and structural properties of GQDs (e.g., defects, heteroatom doping, surface/edge state, size, conductivity) on the electrochemical energy‐related systems are discussed in‐depth in this review. Additionally, this review also focuses on the design of GQDs‐based composites and their applications in the fields of electrochemical energy storage (e.g., supercapacitors and batteries) and electrocatalysis (e.g., fuel cell, water splitting, CO₂ reduction), along with constructive suggestions for addressing the remaining challenges in the field.     

Improved stability and catalytic activity of graphene oxide/chitosan hybrid beads loaded with porcine liver esterase

Graphene oxide/chitosan and reduced graphene oxide/chitosan (GO/CS and RGO/CS) beads were prepared by precipitation with NaOH. Porcine liver esterase was immobilized on these beads to give GO/CS/E and RGO/CS/E beads. The optimum conditions for the maximum activity of RGO/CS/E beads were pH 8 and 50°C. The stability of the enzyme immobilized on GO/CS/E and RGO/CS/E was high in the pH range of 5–8. The GO/CS/E beads showed superior stability compared to that of the free enzyme and CS/E beads between 20 and 50°C. Kinetic analysis showed that GO/CS/E was a better catalyst than the RGO/CS/E beads with a lower K_m value of 0.9?mM. The hybrid beads also retained more than 95% activity after 10 consecutive cycles. The GO/CS/E and RGO/CS/E beads retained 84% and 87% activity after 40 days at 4°C. The GO/CS/E beads were used for the successful hydrolysis of methyl 4-hydroxy benzoate.     

Molecular dynamics simulation of the graphene–water interface: comparing water models

In this work, different water models (i.e. SPC/E, TIP3P, TIP4P/2005, TIP5P, SPC/Fw, TIP4P/2005f and SWM4_DP) are implemented to simulate water on neutral, negatively charged and positively charged graphene. In all cases ambient conditions are considered. Structural and dynamical properties for water are calculated to quantify the differences among various water models. The results show that SPC/E, TIP4P/2005, SPC/Fw, TIP4P/2005f and SWM4_DP water models yield a similar structure for interfacial water on graphene, whether it is neutral, negatively charged or positively charged. TIP5P is the model whose predictions for the structure of the interface deviate the most from those of the other models. Although qualitatively the results are for the most part similar, a large quantitative variation is observed among the dynamical properties predicted when various water models are implemented. Although experimental data are not available to discriminate the most/least accurate of the model predictions, our results could be useful for comparing results for interfacial water obtained implementing different models. Such critical comparison will benefit practical applications such as the development of energy-storage and water-desalination devices (e.g. electric double-layer capacitors), among others.     

Theoretical study of the interaction between X (H,F) and graphene

This study investigates the interaction between X (X = H and F) and graphene C₅₄H₁₈ (D_6 h), and the potential energy surface of the graphene radical. The calculations on the structures and energies are further discussed thermodynamically and kinetically using the density function theory method at the B3LYP/6-31G (d) level. Our findings show that there are four distinct isomers of C₅₄H₁₈–X. C₅₄H₁₈–H² and C₅₄H₁₈–F⁴ are the most stable isomers in their own systems. In addition, the transition states, as well as reaction pathways of H transferring between different key points on representative patch, are given to explore the possible reaction mechanism. Finally, the stability of C₅₄H₁₈–X₂ is discussed through the density functional theory.     

Aptasensor for amplified IgE sensing based on fluorescence quenching by graphene oxide

Water‐soluble graphene oxide (GO) with a two‐dimensional layered nanostructure was synthesized and used as a quencher to construct a highly sensitive and selective fluorescence resonance energy transfer (FRET) aptasensor for sensing Immunoglobulin E (IgE). The fluorescein isothiocyanate (FITC)‐labeled aptamer could be adsorbed stably onto the surface of GO via π → π stacking interaction, which led to the occurrence of FRET from FITC to GO, and the fluorescence of FITC‐labeled aptamer was quenched by GO via energy transfer. In the presence of IgE, the fluorescence was recovered due to a higher affinity between the aptamer and IgE compared with interactions between GO and the aptamer, leading to a high signal‐to‐background ratio. The fluorescence intensity of the aptamer increased in proportion to the amount of IgE in the sample,so that IgE could be detected with a linear range of 60–225 pM and a detection limit of 22 pM. The assay was highly selective because the aptamer was unaffected by the presence of immunoglobulin G (IgG), human serum albumin (HSA) and bovine serum albumin (BSA). The practical application of the proposed aptasensor was successfully carried out for the determination of IgE in human serum samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Structure-properties relations in graphene derivatives and metamaterials obtained by atomic-scale modeling

ABSTRACT

Recent findings of atomic-scale modelling studies are reviewed on graphene derivatives and metamaterials fabricated through chemical functionalization and/or defect engineering of graphene sheets. Results of molecular-statics and molecular-dynamics simulations according to a reliable bond-order potential, as well as first-principles density functional theory calculations are reviewed that have established useful structure-properties relations in two-dimensional materials, such as graphene nanomeshes (GNMs), electron-irradiated graphene, and interlayer-bonded twisted bilayer graphene. Quantitative relationships are established for the elastic moduli, mechanical properties, and thermal conductivity of GNMs as a function of the nanomesh porosity and the mechanical response of GNMs to uniaxial tensile straining is explored over the range of nanomesh porosities. The dependence of structural, mechanical, and thermal transport properties of electron-irradiated graphene sheets on the density of irradiation-induced defects is reviewed, highlighting an amorphization transition accompanied by a brittle-to-ductile transition and a transition in thermal transport mechanism beyond a critical defect concentration. The tunability of the electronic band structure, mechanical properties, and structural response to mechanical loading of graphene-diamond nanocomposite superstructures consisting of nanodiamond superlattices in interlayer-bonded twisted bilayer graphene also is demonstrated by precise control of the density and distribution of covalent interlayer C–C bonds.