Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens.

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Cloning and expression of an alpha-amylase gene from Streptomyces thermoviolaceus CUB74 in Escherichia coli JM107 and S. lividans TK24

A gene coding for a thermostable extracellular alpha-amylase, carried by a 5.7 kb BamHI chromosomal DNA fragment isolated from Streptomyces thermoviolaceus strain CUB74, was cloned into Escherichia coli JM107 using, as a cloning vector, the high-copy-number plasmid pUC8. E. coli containing a recombinant plasmid pQR300 expressed the amylase gene and exported the enzyme into the periplasmic space and the culture medium. The amylase protein expressed by E. coli had the same molecular mass (50 kDa) as that expressed by the Streptomyces parent strain, which suggests that the enzyme is processed similarly by both strains. The amylase gene was also cloned into Streptomyces lividans TK24 using pIJ702 as vector. The enzyme was stable at 70 degrees C when CaCl2 was present.     

Construction of an extrachromosomally replicating transformation vector for Dictyostelium discoideum

An extrachromosomally replicating transformation vector for Dictyostelium discoideum has been constructed using sequences of the endogenous Dictyostelium plasmid Ddp2. This transformation vector pnDeI (9.6 kb) replicates as a high copy number plasmid in Dictyostelium and is located in the nucleus. It has been constructed as shuttle vector containing the Escherichia coli vector pUC19 for replication and selection in E. coli and a part of the Tn903 transposon which confers resistance to G418 for selection in Dictyostelium. In order to show that the vector can be used for cloning and stable propagation of Dictyostelium DNA, a fragment of the Dictyostelium alpha-actinin gene that was marked with a synthetic oligonucleotide was cloned into pnDeI and found to be stably maintained in the extrachromosomal vector without undergoing noticeable recombination with the endogenous gene.     

Direct cloning of full-length mouse mitochondrial DNA using a Bacillus subtilis genome vector

The complete mouse mitochondrial genome (16.3 kb) was directly cloned into a Bacillus subtilis genome (BGM) vector. Two DNA segments of 2.06 and 2.14 kb that flank the internal 12 kb of the mitochondrial DNA (mtDNA) were subcloned into an Escherichia coli plasmid. Subsequent integration of the plasmid at the cloning locus of the BGM vector yielded a derivative specific for the targeted cloning of the internal 12-kb mtDNA region. The BGM vector took up mtDNA purified from mouse liver and integrated it by homologous recombination at the two preinstalled mtDNA-flanking sequences. The complete cloned mtDNA in the BGM vector was converted to a covalently closed circular (ccc) plasmid form via gene conversion in B. subtilis. The mtDNA carried on this plasmid was then isolated and transferred to E. coli. DNA sequence fidelity and stability through the BGM vector-mediated cloning process were confirmed.     

肺炎支原体P1蛋白羧基端基因片段在大肠杆菌中克隆的研究

在大肠杆菌中克隆肺炎支原体P1蛋白羧基端基因片段,为P1蛋白基因片段的扩增、表达及探讨羧基端基因片段功能打基础.采用PCR扩增方法获取P1结构基因.扩增产物用SalI和EcoRI酶切消化,回收1kb大小的DNA片段并与pUC19DNA连接,转入大肠杆菌JM109菌株.用X-gal平板及质粒图谱分析方法筛选重组克隆株,再用限制性核酸内切酶酶切图谱分析鉴定.经PCR扩增MPDNA获得1条5.0kbDNA片段.重组质粒限制性内切酶指纹图谱显示出2条带,1条为pUC19载体DNA带,另1条是1kb的插入片段.实验获得肺炎支原体P1蛋白结构基因及含P1蛋白羧基端DNA片段的重组克隆株.     

Construction of a Helicobacter pylori-Escherichia coli shuttle vector for gene transfer in Helicobacter pylori.

In this study, a Helicobacter pylori-Escherichia coli shuttle vector was constructed for transferring DNA into H. pylori. The smallest cryptic plasmid (1.2 kb), pHP489, among those harbored by 77 H. pylori isolates was selected as a base replicon for constructing vectors. HindIII-digested pHP489 was ligated with a kanamycin resistance gene [aph(3')-III], which originated from Campylobacter jejuni, to produce the recombinant plasmid pHP489K. pHP489K was efficiently transformed into and stably maintained in H. pylori strains. The shuttle vector pBHP489K (3.6 kb) was constructed by the recombination of pHP489, ColE1, and aph(3')-III sequences. pBHP489K was reciprocally transformed into and maintained in both H. pylori and E. coli. Introduction of the shuttle vector clone DNA (pBHP489K/AB; 6.7 kb), containing the ureA and ureB genes of H. pylori, into urease-negative mutants of H. pylori led to the restoration of their urease activity. The transformants were confirmed to contain the incoming plasmid DNA. pBHP489K satisfied the requirements for an H. pylori-E. coli shuttle vector, implying that it might be a useful vector for investigating pathogenicity and restriction-modification systems of H. pylori.     

Epidermolytic toxin serotype B of Staphylococcus aureus is plasmid-encoded

Abstract The gene coding for epidermolytic toxin serotype B ( etb ) was cloned in a plasmid expression vector in Escherichia coli . Its expression was dependent on the vector plasmid's trc promoter. A polypeptide immunochemically indistinguishable from the purified staphylococcal toxin and with the same molecular weight was predominantly localized in the periplasm of E. coli . The etb gene resides on a 1.7 kb Hin dIII fragment of the 42 kb plasmid pTC142 present in the parental Staphylococcus aureus strain.     

Cloning and expression of an agarase gene from a marine bacterium Pseudomonas sp. w7

Two different agarase genes (pSW1, pSW3) were cloned from a marine bacterium Pseudomonas sp. W7 into E. coli JM83 using the multicopy plasmid vector pUC19. Two cloned strains of recombinant E. coli which showed the agarase activity were obtained and were named E. coli JM83/pSW1 and E. coli JM83/pSW3. These strains had the insert fragment of 3.7kb and 3.0kb, respectively. The N-terminal amino acid sequence of the agarase containing the recombinant plasmid pSW3 was determined and the sequence did not show homology to any other known agarases. The optimum pH and temperature of the agarases from the cloned strains, E. coli JM83/pSW1 and pSW3, were 6.0, 7.0 and 30°C, 40°C, respectively.     

Cloning and the expression of the hemolysin gene of Leptospira pomona pomona in Escherichia coli

The library of Leptospira pomona genes was obtained on phage vector AL 47.1. From this library a recombinant phage carrying the hemolysin gene was selected. The DNA fragment (7.7 kb) of this phage containing the hemolysin gene was subcloned on plasmid pUC19. E. coli clones with hybrid plasmid pDR7 were shown to be hemolytic, but the secretion of hemolysin by E. coli into the culture medium was not observed.     

Cloning and expression of the gene(s) for cephalosporinase production of Citrobacter freundii

The chromosomal gene(s) for cephalosporinase production of Citrobacter freundii GN346 has been cloned into vector plasmid pMK1, initially as a 7.3 kb EcoRI fragment. From the substrate profile and the response to anti-GN346 CSase serum of the enzyme produced, it was confirmed that the hybrid plasmid (pTY71) carries the relevant chromosomal cephalosporinase gene from C. freundii GN346. A restriction endonuclease cleavage map of cloned EcoRI fragments was constructed, and the structural gene of the cephalosporinase could be limited in the 1.5 kb BamHI fragment. The cloned gene(s) was expressed at an extremely low level in Escherichia coli. Furthermore, its expression was constitutive in E. coli, although inducible in its own cytoplasm.     

Acquisition of a sucrose utilization system in Escherichia coli K-12 derivatives and its application to industry.

An Escherichia coli strain, B-62, that was isolated from a clinical source and was epidemiologically unrelated to E. coli K-12 was the source of chromosomal DNA for a sucrose utilization system (Scr+) in the construction of a plasmid, pST621. The cloned insert of a gene encoding Scr+ in pST621 conferred a sucrose-positive phenotype onto transformed cells of E. coli K-12 derivatives. Sucrase activity of the transformants was as high as that which would correspond to a "gene dosage effect" of a vector plasmid pBR322, whereas the transformants' sucrose uptake activity was always lower than that of E. coli B-62. A region within an XhoI-SacI fragment (3.2 kb) of pBR322-glyA was replaced in the construction of another plasmid, pST5R7, by a fragment (about 2.6 kb) of pST622 containing the gene encoding Scr+. A genetically stable Scr+ derivative of E. coli K-12 was obtained by introducing the gene encoding Scr+ onto E. coli chromosome via homologous recombination between pST5R7 and the chromosome and subsequent plasmid segregation. The use of low-copy-number plasmid RP4 as a cloning vector was also effective for enhancing the stability of Scr+. Tryptophan producers E. coli SGIII1032S, in which the gene encoding Scr+ was cloned onto the chromosome, and E. coli SGIII1032, which carried Scr+ plasmid RP4.5R7, produced from 6% sucrose in shake flasks (33 degrees C, 96 h) 2.3 and 5.7 g of tryptophan per liter, respectively.     

Acquisition of a sucrose utilization system in Escherichia coli K-12 derivatives and its application to industry.

An Escherichia coli strain, B-62, that was isolated from a clinical source and was epidemiologically unrelated to E. coli K-12 was the source of chromosomal DNA for a sucrose utilization system (Scr+) in the construction of a plasmid, pST621. The cloned insert of a gene encoding Scr+ in pST621 conferred a sucrose-positive phenotype onto transformed cells of E. coli K-12 derivatives. Sucrase activity of the transformants was as high as that which would correspond to a "gene dosage effect" of a vector plasmid pBR322, whereas the transformants' sucrose uptake activity was always lower than that of E. coli B-62. A region within an XhoI-SacI fragment (3.2 kb) of pBR322-glyA was replaced in the construction of another plasmid, pST5R7, by a fragment (about 2.6 kb) of pST622 containing the gene encoding Scr+. A genetically stable Scr+ derivative of E. coli K-12 was obtained by introducing the gene encoding Scr+ onto E. coli chromosome via homologous recombination between pST5R7 and the chromosome and subsequent plasmid segregation. The use of low-copy-number plasmid RP4 as a cloning vector was also effective for enhancing the stability of Scr+. Tryptophan producers E. coli SGIII1032S, in which the gene encoding Scr+ was cloned onto the chromosome, and E. coli SGIII1032, which carried Scr+ plasmid RP4.5R7, produced from 6% sucrose in shake flasks (33 degrees C, 96 h) 2.3 and 5.7 g of tryptophan per liter, respectively.     

酿酒酵母海藻糖合成酶基因的克隆和在大肠村菌中的表达

用PCR方法克隆了1．5kb的酿酒母Sacchromyces cerevisiae海藻糖合成酶基因TPSI,将该片段连接到pUC19载体,通过转化分别引入海藻糖合成酶基因缺失和缺陷的大肠杆菌Escherichia coli FF4169 和FF4050,对转化株的质粒DNA酶切分析表明均含有1．5kb PCR克隆片段,生长曲线实验证明,带有克隆片段的转化株在含0．5mol/L NaCl的高渗透压基础培养基中生长良好;用高效液相色谱（HPLC）结合蒸发散射（ELSD）技术测定细胞内海藻糖实验证明转化株能够合成海藻糖。     

Functional analysis of ori1 and repA of the R-plasmid pSJ5.6 from Neisseria gonorrhoeae

The functional ori1 of the 5.6kb gonococcal R-plasmid pSJ5.6 contains an A-T rich region followed by four 22bp direct repeats and one 19bp inverted repeat. The replication region of the plasmid also contains a gene encoding for a 39kD RepA protein. We have further assessed the functionality of the replication region in pSJ5.6, an-iteron type plasmid, using in vivo complementation assays in Escherichia coli. A 2.1kb PstI-RsaI fragment containing the ori1 and repA gene of pSJ5.6 was cloned into vector pZErO -2 to obtain pZA-MRR. The pUC origin in pZA-MRR was deleted to render the plasmid dependable on the cis-acting ori1 for replication. The resulting plasmid, pMRR, was capable of replication and maintenance in E. coli. We also cloned the ori1 and repA gene separately to obtain pA-Ori and pZG-Rep, respectively. Using in vivo complementation assays, we demonstrated that the ori1(+) plasmid (pA-Ori) was maintained only when the RepA protein was supplied in trans by the high copy number plasmid pZG-Rep.     

Localization of an origin of replication in Corynebacterium diphtheriae broad host range plasmid pNG2 that also functions in Escherichia coli

Subcloning and protoplast transformation studies identified a 2.6 kb fragment of Corynebacterium diphtheriae plasmid pNG2 which contains an origin of replication (oriR). Molecular combination of the 2.6 kb oriR cartridge with Escherichia coli plasmid pUC18CmR enabled the E. coli cloning vector to replicate within several species of Corynebacterium host cells. A 2.6 kb plasmid formed from the oriR cartridge alone is capable of replicating in E. coli. This suggests that a single origin could be used in vectors shuttling between Corynebacterium spp. and E. coli.     

Parameters associated with cloning in Actinobacillus actinomycetemcomitans

Characterization of virulence traits in Actinobacillus actinomycetemcomitans requires the application of recombinant DNA techniques. To develop appropriate genetic tools it is necessary to identify suitable host-vector systems. The current study assessed cloning parameters in A. actinomycetemcomitans for two previously described vectors, pDMG4 and pMMB67. It was determined that the maximum size of recombinant molecules that could be transferred to A. actinomycetemcomitans strain ATCC29522 via electroporation was 33 kb. The size limit for transformation of the same strain with ligation mixtures (direct cloning), however, was limited to 23-24 kb. Additional experiments included electroporation of various A. actinomycetemcomitans strains with plasmid DNA isolated from Escherichia coli and different A. actinomycetemcomitans sources. Differences in transformation efficiencies suggested the presence of a restriction modification system for pDMG4 in some strains of A. actinomycetemcomitans. Cloning of portions of the enterococcal plasmid pJH1 into A. actinomycetemcomitans resulted in the insertion of the intact vector into the chromosome.     

Transfer of the chromosomal bla gene from Enterobacter cloacae to Escherichia coli by RP4::mini-Mu

The resistance gene for beta-lactamase-stable cephalosporins from Enterobacter cloacae was transferred to Escherichia coli by the aid of RP4::mini-Mu. The R-prime plasmids generated carried 60 to 80 kilobases (kb) of E. cloacae DNA and coded for the chromosomal E. cloacae beta-lactamase. The gene was fully expressed in the recipient. Restriction endonuclease EcoRI fragments of the R-prime plasmid pBP100 were cloned into the vector pBP328, yielding the plasmid pBP102 with a size of 14 kb. A restriction map of this plasmid was constructed. By digesting pBP102 into seven PstI fragments, ligating the fragments, and looking for the smallest plasmid generated, pBP103 was isolated. It consisted of three PstI fragments, two of them (together 4.2 kb) necessary for resistance. During the experiment (performed in a recA+ background) the largest PstI fragment had undergone a substitution of a 0.3-kb segment of pBP102 by a 0.7-kb segment in pBP103 (as deduced by heteroduplex analysis). The bla gene of resistant E. cloacae strains was dominant over the gene of susceptible organisms.     

Evidence that the clindamycin-erythromycin resistance gene of Bacteroides plasmid pBF4 is on a transposable element.

We constructed a shuttle vector, pE5-2, which can replicate in both Bacteroides spp. and Escherichia coli. pE5-2 contains a cryptic Bacteroides plasmid (pB8-51), a 3.8-kilobase (kb) EcoRI-D fragment from the 41-kb Bacteroides fragilis plasmid pBF4, and RSF1010, an IncQ E. coli plasmid. pE5-2 was mobilized by R751, an IncP E. coli plasmid, between E. coli strains with a frequency of 5 X 10(-2) to 3.8 X 10(-1) transconjugants per recipient. R751 also mobilized pE5-2 from E. coli donors to Bacteroides uniformis 0061RT and Bacteroides thetaiotaomicron 5482 with a frequency of 0.9 X 10(-6) to 2.5 X 10(-6). The Bacteroides transconjugants contained only pE5-2 and were resistant to clindamycin and erythromycin. Thus, the gene for clindamycin and erythromycin resistance must be located within the Eco RI-D fragment of BF4. A second recombinant plasmid, pSS-2, which contained 33 kb of pBF4 (including the EcoRI-D fragment and contiguous regions) could also be mobilized by R751 between E. coli strains. In some transconjugants, a 5.5-kb (+/- 0.3 kb) segment of the pBF4 portion of pSS2 was inserted into one of several sites on R751. In some other transconjugants this same 5.5-kb segment was integrated into the E. coli chromosome. This segment could transfer a second time onto R751. Transfer was RecA independent. The transferred segment included the entire EcoRI-D fragment, and thus the clindamycin-erythromycin resistance determinant, from pBF4.     

A novel shuttle vector for Streptomyces spp. and Escherichia coli as a tool in site-directed mutagenesis.

This paper describes the construction and utilization of a novel shuttle vector for Streptomyces spp. and Escherichia coli as a useful vector in site-directed mutagenesis. The shuttle vector pIAFS20 (6.7 kb) has the following features: a replicon for Streptomyces spp., isolated from plasmid pIJ702; the thiostrepton-resistance gene as a selective marker in Streptomyces; the ColE1 origin, allowing replication in E. coli; and the ampicillin-resistance gene as a selective marker in E. coli. Vector pIAFS20 also contains the phage f1 intergenic region, which permits production of single-stranded DNA in E. coli after superinfection with helper phage M13K07. Moreover, the lac promoter is located in front of the multiple cloning sites cassette, allowing eventual expression of the cloned genes in E. coli. After mutagenesis and screening of the mutants in E. coli, the plasmids can be readily used to transform Streptomyces spp. As a demonstration, a 3.2-kb DNA fragment containing the gene encoding the xylanase A from Streptomyces lividans 1326 was inserted into pIAFS20, and the promoter region of this gene served as a target for site-directed mutagenesis. The two deletions reported here confirm the efficiency of this new vector as a tool in mutagenesis.