共查询到20条相似文献,搜索用时 15 毫秒
1.
The contribution of disulfide bridges to the thermostability of a type A feruloyl esterase (AuFaeA) from Aspergillus usamii E001 was studied by introducing an extra disulfide bridge or eliminating a native one from the enzyme. MODIP and DbD, two computational tools that can predict the possible disulfide bridges in proteins for thermostability improvement, and molecular dynamics (MD) simulations were used to design the extra disulfide bridge. One residue pair A126-N152 was chosen, and the respective amino acid residues were mutated to cysteine. The wild-type AuFaeA and its variants were expressed in Pichia pastoris GS115. The temperature optimum of the recombinant (re-) AuFaeAA126C-N152C was increased by 6°C compared to that of re-AuFaeA. The thermal inactivation half-lives of re-AuFaeAA126C-N152C at 55 and 60°C were 188 and 40 min, which were 12.5- and 10-folds longer than those of re-AuFaeA. The catalytic efficiency (kcat/Km) of re-AuFaeAA126C-N152C was similar to that of re-AuFaeA. Additionally, after elimination of each native disulfide bridge in AuFaeA, a great decrease in expression level and at least 10°C decrease in thermal stability of recombinant AuEaeA variants were also observed. 相似文献
2.
Purification, characterization, and molecular cloning of acidophilic xylanase from penicillium sp.40
Kimura T Ito J Kawano A Makino T Kondo H Karita S Sakka K Ohmiya K 《Bioscience, biotechnology, and biochemistry》2000,64(6):1230-1237
Penicillum sp. 40, which can grow in an extremely acidic medium at pH 2.0 was screened from an acidic soil. This fungus produces xylanases when grown in a medium containing xylan as a sole carbon source. A major xylanase was purified from the culture supernatant of Penicillium sp. 40 and designated XynA. The molecular mass of XynA was estimated to be 25,000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. XynA has an optimum pH at 2.0 and is stable in pH 2.0-5.0. Western blot analysis using anit-XynA antibody showed that XynA was induced by xylan and repressed by glucose. Also, its production was increased by an acidic medium. The gene encoding XynA (xynA) was isolated from the genomic library of Penicillium sp. 40. The structural part of xynA was found to be 721 bp. The nucleotide sequence of cDNA amplified by RT-PCR showed that the open reading frame of xynA was interrupted by a single intron which was 58 bp in size and encoded 221 amino acids. Direct N-terminal amino acid sequencing showed that the precursor of XynA had a signal peptide composed of 31 amino acids. The molecular mass caliculated from the deduced amino acid sequence of XynA is 20,713. This is lower than that estimated by gel electrophoresis, suggesting that XynA is a glycoprotein. The predicted amino acid sequence of XynA has strong similarity to other family xylanases from fungi. 相似文献
3.
Dong-Dong Meng Yu Ying Xiao-Hua Chen Ming Lu Kang Ning Lu-Shan Wang Fu-Li Li 《Applied and environmental microbiology》2015,81(6):2006-2014
Xylanases are crucial for lignocellulosic biomass deconstruction and generally contain noncatalytic carbohydrate-binding modules (CBMs) accessing recalcitrant polymers. Understanding how multimodular enzymes assemble can benefit protein engineering by aiming at accommodating various environmental conditions. Two multimodular xylanases, XynA and XynB, which belong to glycoside hydrolase families 11 (GH11) and GH10, respectively, have been identified from Caldicellulosiruptor sp. strain F32. In this study, both xylanases and their truncated mutants were overexpressed in Escherichia coli, purified, and characterized. GH11 XynATM1 lacking CBM exhibited a considerable improvement in specific activity (215.8 U nmol−1 versus 94.7 U nmol−1) and thermal stability (half-life of 48 h versus 5.5 h at 75°C) compared with those of XynA. However, GH10 XynB showed higher enzyme activity and thermostability than its truncated mutant without CBM. Site-directed mutagenesis of N-terminal amino acids resulted in a mutant, XynATM1-M, with 50% residual activity improvement at 75°C for 48 h, revealing that the disordered region influenced protein thermostability negatively. The thermal stability of both xylanases and their truncated mutants were consistent with their melting temperature (Tm), which was determined by using differential scanning calorimetry. Through homology modeling and cross-linking analysis, we demonstrated that for XynB, the resistance against thermoinactivation generally was enhanced through improving both domain properties and interdomain interactions, whereas for XynA, no interdomain interactions were observed. Optimized intramolecular interactions can accelerate thermostability, which provided microbes a powerful evolutionary strategy to assemble catalysts that are adapted to various ecological conditions. 相似文献
4.
Xylanase XynA from the hyperthermophilic bacterium Thermotoga maritima: structure and stability of the recombinant enzyme and its isolated cellulose-binding domain.
下载免费PDF全文
![点击此处可从《Protein science : a publication of the Protein Society》网站下载免费的PDF全文](/ch/ext_images/free.gif)
D. Wassenberg H. Schurig W. Liebl R. Jaenicke 《Protein science : a publication of the Protein Society》1997,6(8):1718-1726
The hyperthermophilic bacterium Thermotoga maritima is capable of gaining metabolic energy utilizing xylan. XynA, one of the corresponding hydrolases required for its degradation, is a 120-kDa endo-1,4-D-xylanase exhibiting high intrinsic stability and a temperature optimum approximately 90 degrees C. Sequence alignments with other xylanases suggest the enzyme to consist of five domains. The C-terminal part of XynA was previously shown to be responsible for cellulose binding (Winterhalter C, Heinrich P, Candussio A, Wich G, Liebl W. 1995. Identification of a novel cellulose-binding domain within the multi-domain 120 kDa Xylanase XynA of the hyperthermophilic bacterium Thermotoga maritima. Mol Microbiol 15:431-444). In order to characterize the domain organization and the stability of XynA and its C-terminal cellulose-binding domain (CBD), the two separate proteins were expressed in Escherichia coli. CBD, because of its instability in its ligand-free form, was expressed as a glutathione S-transferase fusion protein with a specific thrombin cleavage site as linker. XynA and CBD were compared regarding their hydrodynamic and spectral properties. As taken from analytical ultracentrifugation and gel permeation chromatography, both are monomers with 116 and 22 kDa molecular masses, respectively. In the presence of glucose as a ligand, CBD shows high intrinsic stability. Denaturation/renaturation experiments with isolated CBD yield > 80% renaturation, indicating that the domain folds independently. Making use of fluorescence emission and far-UV circular dichroism in order to characterize protein stability, guanidine-induced unfolding of XynA leads to biphasic transitions, with half-concentrations c1/2 (GdmCl) approximately 4 M and > 5 M, in accordance with the extreme thermal stability. At acid pH, XynA exhibits increased stability, indicated by a shift of the second guanidine-transition from 5 to 7 M GdmCl. This can be tentatively attributed to the cellulose-binding domain. Differences in the transition profiles monitored by fluorescence emission and dichroic absorption indicate multi-state behavior of XynA. In the case of CBD, a temperature-induced increase in negative ellipticity at 217 nm is caused by alterations in the environment of aromatic residues that contribute to the far-UV CD in the native state. 相似文献
5.
《Bioscience, biotechnology, and biochemistry》2013,77(6):1230-1237
Penicillum sp. 40, which can grow in an extremely acidic medium at pH 2.0 was screened from an acidic soil. This fungus produces xylanases when grown in a medium containing xylan as a sole carbon source. A major xylanase was purified from the culture supernatant of Penicillium sp. 40 and designated XynA. The molecular mass of XynA was estimated to be 25,000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. XynA has an optimum pH at 2.0 and is stable in pH 2.0-5.0. Western blot analysis using anit-XynA antibody showed that XynA was induced by xylan and repressed by glucose. Also, its production was increased by an acidic medium. The gene encoding XynA (xynA) was isolated from the genomic library of Penicillium sp. 40. The structural part of xynA was found to be 721 bp. The nucleotide sequence of cDNA amplified by RT-PCR showed that the open reading frame of xynA was interrupted by a single intron which was 58 bp in size and encoded 221 amino acids. Direct N-terminal amino acid sequencing showed that the precursor of XynA had a signal peptide composed of 31 amino acids. The molecular mass caliculated from the deduced amino acid sequence of XynA is 20,713. This is lower than that estimated by gel electrophoresis, suggesting that XynA is a glycoprotein. The predicted amino acid sequence of XynA has strong similarity to other family11 xylanases from fungi. 相似文献
6.
Almagro JC Raghunathan G Beil E Janecki DJ Chen Q Dinh T LaCombe A Connor J Ware M Kim PH Swanson RV Fransson J 《Journal of molecular recognition : JMR》2012,25(3):125-135
Disulfide bridges are common in the antigen-binding site from sharks (new antigen receptor) and camels (single variable heavy-chain domain, VHH), in which they confer both structural diversity and domain stability. In human antibodies, cysteine residues in the third complementarity-determining region of the heavy chain (CDR-H3) are rare but naturally encoded in the IGHD germline genes. Here, by panning a phage display library designed based on human germline genes and synthetic CDR-H3 regions against a human cytokine, we identified an antibody (M3) containing two cysteine residues in the CDR-H3. It binds the cytokine with high affinity (0.4?nM), recognizes a unique epitope on the antigen, and has a distinct neutralization profile as compared with all other antibodies selected from the library. The two cysteine residues form a disulfide bridge as determined by mass spectrometric peptide mapping. Replacing the cysteines with alanines did not change the solubility and stability of the monoclonal antibody, but binding to the antigen was significantly impaired. Three-dimensional modeling and dynamic simulations were employed to explore how the disulfide bridge influences the conformation of CDR-H3 and binding to the antigen. On the basis of these results, we envision that designing human combinatorial antibody libraries to contain intra-CDR or inter-CDR disulfide bridges could lead to identification of human antibodies with unique binding profiles. 相似文献
7.
Karimzadeh S Moradi M Hosseinkhani S 《International journal of biological macromolecules》2012,51(5):837-844
The wild type Photinus pyralis luciferase does not have any disulfide bridge. Disulfide bridges are determinant in inherent stability of protein at moderate temperatures. Meanwhile, arginin is responsible for thermostability at higher temperatures. In this study, by concomitant introduction of disulfide bridge and a surface arginin in a mutant (A296C-A326C/I232R), the contribution of disulfide bridge introduction and surface hydrophilic residue on activity and global stability of P. pyralis luciferase is investigated. In addition to the mentioned mutant; I232R, A296C-A326C and wild type luciferases are characterized. Though addition of Arg caused stability against proteolysis but in combination with disulfide bridge resulted in decreased thermal stability compared to A296C-A326C mutant. In spite of long distance of two different mutations (A296C-A326C and I232R) from each other in the three-dimensional structure, combination of their effects on the stability of luciferase was not cumulative. 相似文献
8.
Andreas Ivens Olga Mayans Halina Szadkowski Catharina Jürgens Matthias Wilmanns Kasper Kirschner 《European journal of biochemistry》2002,269(4):1145-1153
The aim of this study was to increase the stability of the thermolabile (betaalpha)8-barrel enzyme indoleglycerol phosphate synthase from Escherichia coli by the introduction of disulfide bridges. For the design of such variants, we selected two out of 12 candidates, in which newly introduced cysteines potentially form optimal disulfide bonds. These variants avoid short-range connections, substitutions near catalytic residues, and crosslinks between the new and the three parental cysteines. The variant linking residues 3 and 189 fastens the N-terminus to the (betaalpha)8-barrel. The rate of thermal inactivation at 50 degrees C of this variant with a closed disulfide bridge is 65-fold slower than that of the reference dithiol form, but only 13-fold slower than that of the parental protein. The near-ultraviolet CD spectrum, the reactivity of parental buried cysteines with Ellman's reagent as well as the decreased turnover number indicate that the protein structure is rigidified. To confirm these data, we have solved the X-ray structure to 2.1-A resolution. The second variant was designed to crosslink the terminal modules betaalpha1 and betaalpha8. However, not even the dithiol form acquired the native fold, possibly because one of the targeted residues is solvent-inaccessible in the parental protein. 相似文献
9.
Amino acid sequence analysis of fungal histidine acid phosphatases displaying phytase activity has revealed a conserved eight-cysteine motif. These conserved amino acids are not directly associated with catalytic function; rather they appear to be essential in the formation of disulfide bridges. Their role is seen as being similar to another eight-cysteine motif recently reported in the amino acid sequence of nearly 500 plant polypeptides. An additional disulfide bridge formed by two cysteines at the N-terminus of all the filamentous ascomycete phytases was also observed. Disulfide bridges are known to increase both stability and heat tolerance in proteins. It is therefore plausible that this extra disulfide bridge contributes to the higher stability found in phytase from some Aspergillus species. To engineer an enhanced phytase for the feed industry, it is imperative that the role of disulfide bridges be taken into cognizance and possibly be increased in number to further elevate stability in this enzyme. 相似文献
10.
Protein engineering of subtilisin BPN': enhanced stabilization through the introduction of two cysteines to form a disulfide bond 总被引:12,自引:0,他引:12
M W Pantoliano R C Ladner P N Bryan M L Rollence J F Wood T L Poulos 《Biochemistry》1987,26(8):2077-2082
Introduction of a disulfide bond by site-directed mutagenesis was found to enhance the stability of subtilisin BPN' (EC 3.4.21.14) under a variety of conditions. The location of the new disulfide bond was selected with the aid of a computer program, which scored various sites according to the amount of distortion that an introduced disulfide linkage would create in a 1.3-A X-ray model of native subtilisin BPN'. Of the several amino acid pairs identified by this program as suitable candidates, Thr-22 and Ser-87 were selected by using the additional requirement that the individual cysteine substitutions occur at positions that exhibit some degree of variability in related subtilisin amino acid sequences. A subtilisin variant containing cysteine residues at positions 22 and 87 was created by site-directed mutagenesis and was shown to have an activity essentially equivalent to that of the wild-type enzyme. Differential scanning calorimetry experiments demonstrated the variant protein to have a melting temperature 3.1 degrees C higher than that of the wild-type protein and 5.8 degrees C higher than that of the reduced form (-SH HS-) of the variant protein. Kinetic experiments performed under a variety of conditions, including 8 M urea, showed that the Cys-22/Cys-87 disulfide variant undergoes thermal inactivation at half the rate of that of the wild-type enzyme. The increased thermal stability of this disulfide variant is consistent with a decrease in entropy for the unfolded state relative to the unfolded state that contains no cross-link, as would be predicted from the statistical thermodynamics of polymers. 相似文献
11.
C A Mikoryak B W Elliott M E Kimball L A Steiner 《Journal of immunology (Baltimore, Md. : 1950)》1986,136(1):217-223
The immunoglobulins of the bullfrog Rana catesbeiana are unusual in that, in all classes, the light chains are not disulfide bonded to heavy chains or to other light chains. Moreover, the light chains contain six, rather than the usual five, residues of half-cystine. As none of these half-cystines is in the sulfhydryl form or is alkylated after mild reduction, we suggested that the light chains probably contain three intrachain disulfide bridges. We have now carried out experiments to confirm the existence of an extra intrachain disulfide bridge in Rana catesbeiana light chains and to determine its location. Disulfide bridge assignments were based on 1) isolation and sequence analysis of S-(carboxymethyl)cysteine-containing peptides and 2) isolation, from unreduced light chains, of peptides containing a disulfide bridge. Half-cystine residues were found at positions 134 and 194, and these were shown to be joined in the conserved intradomain disulfide bridge. In addition, we found that a residue of half-cystine, located at the third position from the carboxy-terminus, forms a disulfide bridge with a half-cystine at position 119, near the amino-terminus of the domain, the latter residue replacing a proline that has been found at this position in all other light chains. An intrachain disulfide bridge has not been found at this location in any other light chain. 相似文献
12.
Nina Hakulinen Ossi Turunen Janne J?nis Matti Leisola Juha Rouvinen 《European journal of biochemistry》2003,270(7):1399-1412
The crystal structures of thermophilic xylanases from Chaetomium thermophilum and Nonomuraea flexuosa were determined at 1.75 and 2.1 A resolution, respectively. Both enzymes have the overall fold typical to family 11 xylanases with two highly twisted beta-sheets forming a large cleft. The comparison of 12 crystal structures of family 11 xylanases from both mesophilic and thermophilic organisms showed that the structures of different xylanases are very similar. The sequence identity differences correlated well with the structural differences. Several minor modifications appeared to be responsible for the increased thermal stability of family 11 xylanases: (a) higher Thr : Ser ratio (b) increased number of charged residues, especially Arg, resulting in enhanced polar interactions, and (c) improved stabilization of secondary structures involved the higher number of residues in the beta-strands and stabilization of the alpha-helix region. Some members of family 11 xylanases have a unique strategy to improve their stability, such as a higher number of ion pairs or aromatic residues on protein surface, a more compact structure, a tighter packing, and insertions at some regions resulting in enhanced interactions. 相似文献
13.
Schouten A Roosien J Bakker J Schots A 《The Journal of biological chemistry》2002,277(22):19339-19345
Disulfide bridge formation in the reducing environment of the cytosol is considered a rare event and is mostly linked to inactivation of protein activity. In this report the in vivo redox state of a single-chain Fv (scFv) antibody fragment in the plant cytosol was investigated. The scFv antibody fragment consists of the variable light and heavy chain domains from a mouse IgG antibody, which are connected by a flexible linker peptide. In each domain one disulfide bridge is present. The functionality of antibodies, which are normally secreted via the oxidizing environment of the endoplasmic reticulum, depends on the formation of intramolecular disulfide bridges. We demonstrate that a scFv can form intramolecular disulfide bridges and is functionally expressed in the cytosol of stably transformed plants. In addition, the formation of intermolecular disulfide bridges through a cysteine present in the linker peptide was observed. In contrast, transient expression in tobacco protoplasts resulted in a cytosolic scFv lacking disulfide bridges, which had a substantially reduced affinity for the antigen. This indicates that functionality rather than stability is determined by the presence of disulfide bridges in the in planta-expressed scFv antibody. The controversial observation of disulfide bond formation in the cytosol is discussed. 相似文献
14.
Determination of the positions of the disulfide bonds in aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1 总被引:2,自引:0,他引:2
Aqualysin I is a heat-stable alkaline serine protease produced by Thermus aquaticus YT-1. Aqualysin I comprises 281 amino acid residues and contains four cysteine residues. The cysteine residues seemed to form disulfide bonds in the molecule. Thus, the positions of the disulfide bonds were investigated. Disulfide bond-containing peptides were identified by peptide mapping with HPLC before and after carboxymethylation of chymotryptic peptides of aqualysin I. The disulfide bond-containing peptides were isolated and then carboxymethylated. Carboxymethylcysteine-containing peptides were purified, and their amino acid compositions and sequences were determined. Based on the data obtained and the primary structure of aqualysin I, it was concluded that two disulfide bonds were formed between Cys67 and Cys99, and between Cys163 and Cys194. 相似文献
15.
Nishimoto M Kitaoka M Fushinobu S Hayashi K 《Bioscience, biotechnology, and biochemistry》2005,69(5):904-910
An arginine residue in loop 4 connecting beta strand 4 and alpha-helix 4 is conserved in glycoside hydrolase family 10 (GH10) xylanases. The arginine residues, Arg(204) in xylanase A from Bacillus halodurans C-125 (XynA) and Arg(196) in xylanase B from Clostridium stercorarium F9 (XynB), were replaced by glutamic acid, lysine, or glutamine residues (XynA R204E, K and Q, and XynB R196E, K and Q). The pH-k(cat)/K(m) and the pH-k(cat) relationships of these mutant enzymes were measured. The pK(e2) and pK(es2) values calculated from these curves were 8.59 and 8.29 (R204E), 8.59 and 8.10 (R204K), 8.61 and 8.19 (R204Q), 7.42 and 7.19 (R196E), 7.49 and 7.18 (R196K), and 7.86 and 7.38 (R196Q) respectively. Only the pK(es2) value of arginine derivatives was less than those of the wild types (8.49 and 9.39 [XynA] and 7.62 and 7.82 [XynB]). These results suggest that the conserved arginine residue in GH10 xylanases increases the pK(a) value of the proton donor Glu during substrate binding. The arginine residue is considered to clamp the proton donor and subsite +1 to prevent structural change during substrate binding. 相似文献
16.
Dombkowski AA 《Bioinformatics (Oxford, England)》2003,19(14):1852-1853
SUMMARY: Disulfide by Design is a program for the design of novel disulfide bonds in proteins. Protein structure files in PDB format are analyzed to identify residue pairs that are likely to form a disulfide bond if the respective amino acids are mutated to cysteines. The output displays residue pairs having the appropriate geometric characteristics for disulfide formation and provides automated generation of modified PDB files including modeled disulfides. Validation demonstrates a high level of accuracy for the algorithm. AVAILABILITY: http://www.ehscenter.org/dbd/ Supplementary information: http://www.ehscenter.org/dbd/ 相似文献
17.
T A Klink K J Woycechowsky K M Taylor R T Raines 《European journal of biochemistry》2000,267(2):566-572
Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage. 相似文献
18.
Christoph Winterhalter Peter Heinrich Anton Candussio Günther Wich Wolfgang Liebl 《Molecular microbiology》1995,15(3):431-444
A segment of Thermotoga maritima strain MSB8 chromosomal DNA was isolated which encodes an endo-1,4-β-D-xylanase, and the nucleotide sequence of the xylanase gene, designated xynA, was determined. With a half-life of about 40 min at 90°C at the optimal pH of 6.2, purified recombinant XynA is one of the most thermostable xylanases known. XynA is a 1059-amino-acid (?120 kDa) modular enzyme composed of an N-terminal signal peptide and five domains, in the order A1-A2-B-C1-C2. By comparison with other xylanases of family 10 of glycosyl hydrolases, the central ?340-amino-acid part (domain B) of XynA represents the catalytic domain. The N terminal ?150-amino-acid repeated domains (A1-A2) have no significant similarity to the C-terminal ?170-amino-acid repeated domains (C1-C2). Cellulose-binding studies with truncated XynA derivatives and hybrid proteins indicated that the C-terminal repeated domains mediate the binding of XynA to microcrystalline cellulose and that C2 alone can also promote cellulose binding. C1 and C2 did not share amino acid sequence similarity with any other known cellulose-binding domain (CBD) and thus are CBDS of a novel type. Structurally related protein segments which are probably also CBDs were found in other multi-domain xylanolytic enzymes. Deletion of the N-terminal repeated domains or of all the non-catalytic domains resulted In substantially reduced tbermostability while a truncated xylanase derivative lacking the C-terminal tandem repeat was as thermostable as the full-length enzyme. It is argued that the multidomain organization of some enzymes may be one of the strategies adopted by thermophiles to protect their proteins against thermal denaturation. 相似文献
19.
Oktay K. Gasymov Adil R. Abduragimov Ben J. Glasgow 《Biochemical and biophysical research communications》2014
Disulfide bonds play diverse structural and functional roles in proteins. In tear lipocalin (TL), the conserved sole disulfide bond regulates stability and ligand binding. Probing protein structure often involves thiol selective labeling for which removal of the disulfide bonds may be necessary. Loss of the disulfide bond may destabilize the protein so strategies to retain the native state are needed. Several approaches were tested to regain the native conformational state in the disulfide-less protein. These included the addition of trimethylamine N-oxide (TMAO) and the substitution of the Cys residues of disulfide bond with residues that can either form a potential salt bridge or others that can create a hydrophobic interaction. TMAO stabilized the protein relaxed by removal of the disulfide bond. In the disulfide-less mutants of TL, 1.0 M TMAO increased the free energy change (ΔG0) significantly from 2.1 to 3.8 kcal/mol. Moderate recovery was observed for the ligand binding tested with NBD-cholesterol. Because the disulfide bond of TL is solvent exposed, the substitution of the disulfide bond with a potential salt bridge or hydrophobic interaction did not stabilize the protein. This approach should work for buried disulfide bonds. However, for proteins with solvent exposed disulfide bonds, the use of TMAO may be an excellent strategy to restore the native conformational states in disulfide-less analogs of the proteins. 相似文献
20.
Improving the stability of proteins is an important goal in many biomedical and industrial applications. A logical approach is to emulate stabilizing molecular interactions found in nature. Disulfide bonds are covalent interactions that provide substantial stability to many proteins and conform to well-defined geometric conformations, thus making them appealing candidates in protein engineering efforts. Disulfide engineering is the directed design of novel disulfide bonds into target proteins. This important biotechnological tool has achieved considerable success in a wide range of applications, yet the rules that govern the stabilizing effects of disulfide bonds are not fully characterized. Contrary to expectations, many designed disulfide bonds have resulted in decreased stability of the modified protein. We review progress in disulfide engineering, with an emphasis on the issue of stability and computational methods that facilitate engineering efforts. 相似文献