Study of channel-forming properties of latrotoxin in liposomes

Interaction of latrotoxin with phospholipid vesicles and bilayer lipid membranes is shown to proceed differently. Latrotoxin when interacting with liposomes is sorbed on the membrane surface forming no ionic channels in this case. Only latrotoxin fragments obtained due to the toxin hydrolysis by pronase or trypsin are able to form channels. These fragments being inserted into liposomes are coupled strongly with the membrane and are not subjected to the further splitting by proteinases. The electrophoretic spectrum of peptides bound with liposomes is presented by protein components with a molecular weight of 116, 100, 92, 67, 52 and 45 kDa, while zone typical of latrotoxin is absent in this spectrum. The method of small-angle X-rays scattering has shown that tryptic fragments of latrotoxin penetrate into the phospholipid bilayer of liposomes.     

Influence of plant sterols on the phase properties of phospholipid bilayers

The effects of stigmasterol, sitosterol, campesterol, and cholesterol on the phase properties of dipalmitoylphosphatidylcholine bilayers have been compared by differential scanning calorimetry and x-ray diffraction. The sterols were equally effective at progressively reducing the cooperativity and the enthalpy of the dipalmitoylphosphatidylcholine phase transition as their concentrations in the bilayer were increased. Moreover, both differential scanning calorimetry and x-ray diffraction indicated that the dipalmitoylphosphatidylcholine transition was eliminated by each of the sterols when they were present at a concentration of 33 mole%. This indicates that the interaction between phospholipid and both plant and animal sterols is stoichiometric, each sterol associating with two phospholipid molecules. At concentrations above 33 mole% the sterols were no longer completely solvated by the phospholipid, and sterol-sterol interaction resulted. Cholesterol, even at concentrations as high as 50 mole%, did not disrupt the lamellar structure of the bilayer. When these high concentrations of plant sterols were intercalated into the phospholipid, crystallinity, which presumably derives from sterol-sterol interaction, was detectable in the bilayer by x-ray diffraction. This observation is consistent with previous reports to the effect that the C₁₇ chains of the plant sterols render them less soluble in phospholipid than is cholesterol. It is clear that this solvation difference is of insufficient magnitude to affect the stoichiometry of dipalmitoylphosphatidylcholine-sterol interaction, but it could well account for the less effective modulation of lipid bilayer permeability exhibited by plant sterols in comparison with cholesterol.     

Lecithin:cholesterol acyltransferase regulation. Effect of fluidity of dimyristoylphosphatidylcholine vesicles

The regulation of lecithin:cholesterol acyltransferase by changes in phospholipid bilayer fluidity was investigated using pyrene excimer fluorescence to measure fluidity. Fluidity of dimyristoylphosphatidylcholine (DMPC) unilamellar vesicles was decreased by the addition of up to 20% (mol/mol) cholesterol and increased by the addition of up to 10% (mol/mol) lysoDMPC. When both cholesterol and lysoDMPC are present in the bilayer, their individual effects on fluidity are altered. These changes can be explained by complex formation between cholesterol and phospholipid as in the model of Presti et al. (Presti, F.C., Pace, R.J. and Chan, S.I. (1982) Biochemistry 21, 3831-3335). Lecithin:cholesterol acyltransferase activity with these vesicles as substrates was measured to determine whether activity can be modulated by the fluidity changes of the bilayer on which the enzyme acts. When 10% lysoDMPC, a known lecithin:cholesterol acyltransferase inhibitor, is added to the vesicles, inhibition of activity is observed. When 7.5% lysoDMPC is added to vesicles which contain either 5 or 10% cholesterol, lecithin:cholesterol acyltransferase activity increases. This increase in lecithin:cholesterol acyltransferase activity due to vesicle-fluidity increase is sufficient to overcome the decrease in activity due to lecithin:cholesterol acyltransferase inhibition. This is the first report of the ability of lysoDMPC to increase lecithin:cholesterol acyltransferase activity.     

Effects of the lung surfactant protein?B construct Mini-B on lipid bilayer order and topography

The hydrophobic lung surfactant protein, SP-B, is essential for survival. Cycling of lung volume during respiration requires a surface-active lipid-protein layer at the alveolar air-water interface. SP-B may contribute to surfactant layer maintenance and renewal by facilitating contact and transfer between the surface layer and bilayer reservoirs of surfactant material. However, only small effects of SP-B on phospholipid orientational order in model systems have been reported. In this study, N-terminal (SP-B(8-25)) and C-terminal (SP-B(63-78)) helices of SP-B, either linked as Mini-B or unlinked but present in equal amounts, were incorporated into either model phospholipid mixtures or into bovine lipid extract surfactant in the form of vesicle dispersions or mechanically oriented bilayer samples. Deuterium and phosphorus nuclear magnetic resonance (NMR) were used to characterize effects of these peptides on phospholipid chain orientational order, headgroup orientation, and the response of lipid-peptide mixtures to mechanical orientation by mica plates. Only small effects on chain orientational order or headgroup orientation, in either vesicle or mechanically oriented samples, were seen. In mechanically constrained samples, however, Mini-B and its component helices did have specific effects on the propensity of lipid-peptide mixtures to form unoriented bilayer populations which do not exchange with the oriented fraction on the timescale of the NMR experiment. Modification of local bilayer orientation, even in the presence of mechanical constraint, may be relevant to the transfer of material from bilayer reservoirs to a flat surface-active layer, a process that likely requires contact facilitated by the formation of highly curved protrusions.     

Voltage-dependent translocation of R18 and DiI across lipid bilayers leads to fluorescence changes.

We show that the lipophilic, cationic fluorescent dyes R18 and Dil translocate from one monolayer of a phospholipid bilayer membrane to the other in a concentration and voltage-dependent manner. When the probes were incorporated into voltage-clamped planar membranes and potentials were applied, displacement currents resulted. The charged probes sensed a large fraction of the applied field. When these probes were added to only one monolayer, displacement currents were symmetrical around 0 mV, indicating that the probes distributed equally between the two monolayers. Charge translocation required that the bilayer be fluid. When membranes were in a condensed gel phase, displacement currents were not observed; raising the temperature to above the gel-liquid crystalline transition restored the currents. Translocation of R18 was also shown by fluorescence measurements. When R18 was in the bilayer at high, self-quenching concentrations, voltage pulses led to voltage-dependent fluorescence changes. The kinetics of the fluorescence changes and charge translocations correlated. Adding the quencher I- to one aqueous phase caused fluorescence to decrease or increase when voltage moved R18 toward or away from the quencher at low, nonquenching concentrations of R18. In contrast to R18, Dil incorporated into bilayers was a carrier fo I-, and hence I- altered Dil currents. Voltage-driven translocations allow R18 and Dil to be used to probe membrane potential changes.     

Effect of free cholesterol on incorporation of triolein in phospholipid bilayers

Triacylglycerols are the major substrates for lipolytic enzymes that act at the surface of emulsion-like particles such as triglyceride-rich lipoproteins, chylomicrons, and intracellular lipid droplets. This study examines the effect of cholesterol on the solubility of a triacylglycerol, triolein, in phospholipid surfaces. Solubilities of [carbonyl-13C]triolein in phospholipid bilayer vesicles containing between 0 and 50 mol % free cholesterol, prepared by cosonication, were measured by 13C NMR. The carbonyl resonances from bilayer-incorporated triglyceride were shifted downfield in the 13C NMR spectra from those corresponding to excess, nonincorporated material. This enabled solubilities to be determined directly from carbonyl peak intensities at most cholesterol concentrations. The bilayer solubility of triolein was inversely proportional to the cholesterol/phospholipid mole ratio. In pure phospholipid vesicles the triolein solubility was 2.2 mol %. The triglyceride incorporation decreased to 1.1 mol % at a cholesterol/phospholipid mole ratio of 0.5, and at a mole ratio of 1.0 for the bilayer lipids, the triolein solubility was reduced to just 0.15 mol %. The effects of free cholesterol were more pronounced and progressive than observed previously on the bilayer solubility of cholesteryl oleate (Spooner, P. J. R., Hamilton, J. A., Gantz, D. L., & Small, D. M. (1986) Biochim. Biophys. Acta 860, 345-353]. As with cholesteryl oleate, we suggest that cholesterol also displaces solubilized triglyceride to deeper regions of the bilayer.     

The antimicrobial peptide trichogin and its interaction with phospholipid membranes.

The interaction of the antimicrobial peptide trichogin GA IV with phospholipid bilayers has been studied. A series of analogs of trichogin was synthesized in which the nitroxide spin label, 4-amino-4-carboxy-2,2,6,6-tetramethylpiperidino-1-oxyl (TOAC), replaced one of the three alpha-aminoisobutyric acid (Aib) residues in the sequence. These modified peptides were used to assess the location of different residues of the peptide in a phospholipid bilayer composed of egg phosphatidylcholine containing 0.4 mol% of a fluorescently labelled phospholipid. We demonstrate that the substitution of Aib residues with TOAC does not alter the manner in which the peptide affects membrane curvature or induces vesicle leakage. The proximity of the nitroxide group on the peptide to the 4,4-difluoro-4-bora-3a,4a-diaza-S-indacene (BODIPY) fluorophore attached to the phospholipid was estimated from the extent of quenching of the fluorescence. By this criterion it was concluded that the peptide penetrates into the bilayer and that Aib4 is the most deeply inserted of the Aib residues. The results suggest that the helix axis of the peptide is oriented along the plane of the membrane. All of the peptides were shown to raise the bilayer to the hexagonal phase transition temperature of dipalmitoleoylphosphatidylethanolamine, indicating that they promote positive membrane curvature. This is a property observed with peptides that do not penetrate deeply into the bilayer or are oriented along the bilayer normal. We also demonstrate trichogin-promoted leakage of the aqueous contents of liposomes. These results indicate that the peptides cause bilayer destabilization. The extent of leakage induced by trichogin is very sensitive to the peptide to lipid ratio over a narrow range.     

Effects of phospholipase A2 treatment of human erythrocyte membranes on the rates of spectrin-actin dissociation

This work examines the extent to which alterations in the composition of the phospholipid bilayer of the erythrocyte membrane influences the stability of the association of the ‘cytoskeletal network’ to the rest of the membrane. Rates of spectrin-actin dissociation at low ionic strength were used as a measure of the stability, and composition of the phospholipid bilayer was altered by the action of the enzyme phospholipase A₂. Hydrolysis of all the phosphatidylcholine of the outer leaflet of the bilayer had no effect on dissociation rates, whether or not the hydrolysis products were extracted with albumin. Hydrolysis of inner leaflet phospholipids increased the rates by up to 2-fold if the hydrolysis products were not extracted; for ?50% hydrolysis, the rates were unaffected if the hydrolysis products were extracted. The moderate magnitudes of the increases in dissociation rates indicate that interactions between the ‘cytoskeletal network’ and the phospholipid bilayer are not a decisive factor in maintaining the stability of the membrane, at least under low ionic strength conditions.     

Bilayer membrane destabilization induced by dolichylphosphate

Small vesicles containing the fluorescent probe calcein were used to investigate the effect of dolichyl phosphate (Dol-P) on phospholipid bilayer stability. In the absence of Dol-P, phospholipid vesicles retained the fluorescent probe upon the addition of divalent cations. Small vesicles containing Dol-P, however, exhibited calcein leakage when incubated in the presence of divalent cations. This effect was observed in liposomes composed of a mixture of phosphatidylethanolamine (PE), phosphatidylcholine (PC) and Dol-P, but not in PC/Dol-P liposomes. The rate of calcein leakage was proportional to divalent cation concentration and to temperature, but was independent of vesicle concentration. These results demonstrate that Dol-P has significant effects on the stability of PE containing phospholipid bilayers. Vesicle leakage was also promoted by the addition of rat liver Dol-P-mannose synthase (EC 2.4.1.83) to intact PE/PC/Dol-P vesicles. Enzyme induced leakage from phospholipid vesicles required the presence of both unsaturated PE and Dol-P. The phospholipid composition of leaky vesicles could be correlated with the lipid matrix required for maximal transferase activity of the rat liver synthase. The destabilizing effects of Dol-P on phospholipid bilayers may therefore be involved in the translocation of activated sugars across biological membranes.     

Molecular dynamics simulation of the structure of dimyristoylphosphatidylcholine bilayers with cholesterol, ergosterol, and lanosterol

Five molecular dynamics computer simulations were performed on different phospholipid:sterol membrane systems in order to study the influence of sterol structure on membrane properties. Three of these simulated bilayer systems were composed of a 1:8 sterol:phospholipid ratio, each of which employed one of the sterol molecules: cholesterol, ergosterol, and lanosterol. The two other simulations were of a bilayer with a 1:1 sterol:phospholipid ratio. These simulations employed cholesterol and lanosterol, respectively, as their sterol components. The observed differences in simulations with cholesterol and lanosterol may have their implication on the form of the phospholipid/sterol phase diagram.     

Modulation of (Na+,K+)-ATPase activity by the lipid bilayer examined with dansylated phosphatidylserine

The fluorescent probe 8-(dimethylamino)naphthalene-1-sulfonylphosphatidylserine (Dns-PS) was incorporated into purified lamb kidney Na+- and K+-stimulated adenosinetriphosphatase (EC 3.6.1.3) [(Na+,K+)-ATPase] by using a purified phospholipid exchange protein. Phospholipase C was used to reduce phospholipid content. Up to 40% of the phospholipid could be hydrolyzed with only 10% inhibition of the (Na+,K+)-ATPase, but when 67% of the phospholipid was hydrolyzed, the enzyme was inhibited 53%. To examine the effect of protein on the phospholipid bilayer, the fluorescent parameters of the probe incorporated into the enzyme preparation were contrasted with the same parameters for the probe incorporated into the total lipid extract of the preparation. The polarization of fluorescence of the probe in the lipid extract was 0.118 while in the enzyme preparation it was 0.218. This reflected a decrease in fluidity of the glycerol region of the phospholipid bilayer which was mediated by the protein. This effect increased as the phospholipid content of the (Na+,K+)-ATPase preparation was reduced so that with maximal phospholipid reduction the polarization of fluorescence was 0.262. The protein caused a decrease in the transition temperature from gel to fluid states of the bilayer detected by polarization of the probe. The midpoint temperature transition of the enzyme preparation decreased from 33 degrees C when all phospholipids were present to 20 degrees C when 67% of the phospholipids were hydrolyzed. This decrease was not observed for the lipid extract of these samples. A direct correlation between the (Na+,K+)-ATPase specific activity and the polarization of fluorescence of Dns-PS was found. The reduction in phospholipid content did not affect the steady-state level of phosphorylation of the enzyme by ATP but did affect the rate of dephosphorylation which would require conformational changes of the enzymes. The data showed that the fluidity of the phospholipid bilayer can modulate the activity of the (Na+,K+)-ATPase.     

On the impact of nanotube diameter on biomembrane indentation – Computer simulations study

The influence of the single-walled carbon nanotubes on the phospholipid bilayer has been studied using steered molecular dynamics (SMD) simulations. The impact of different nanotubes on the phospholipid bilayer structure is discussed as well as the speed of indentation. Additionally, a series of simulations with pulling out of the nanotubes from the membrane were performed. The deflection of the membrane in both nanoindenation and extraction processes is also discussed. The self-sealing ability of membrane during this process is examined. Complete degradation of the bilayer was not observed even for the most invasive nanoindentation process studied. The obtained results show that carbon nanotubes can be regarded as potential drug carriers for targeted therapy.     

Sterols and sphingolipids strongly affect the growth of fusion pores induced by the hemagglutinin of influenza virus

Cells expressing the hemagglutinin (HA) of influenza virus were fused to planar phospholipid bilayer membranes to evaluate the effects of sterols and sphingolipids in the target bilayer membranes on properties of fusion pores. Typically, in the absence of sterol, flickering pores are observed, followed by a successful pore (i.e., a pore that fully opens). The incorporation of cholesterol into the lipid bilayer had a marked effect: it greatly decreased the number of flickers, and the first pore formed was usually successful. Similar effects were produced by the sterols epicholesterol and 5beta-cholestanol. In contrast, the sterols cholesteryl acetate, coprostanol, and stanolone did not affect pore flickering, and a successful pore was observed to follow the typical number of flickers. 5alpha-cholestanol gave intermediate results. From these results, it follows that the 3-OH of cholesterol is essential to reduce flickering, but it does not matter if the 3-OH is in an alpha or beta configuration. The double bond is also not critical for the actions of cholesterol nor is the fact that it is a flat molecule. The sphingolipids sphingomyelin, lactosyl cerebroside, and glucosyl cerebroside tended to inhibit full pore enlargement, prolonging the stage of pore flickering. If a sphingolipid and a sterol that strongly interact were both included in the planar membrane, the pattern of flickering was the same as if neither had been included in the bilayer. However, if a sphingolipid and sterol that do not interact with each other were included in the bilayer, the reduced flickering characteristic of the sterol was observed.     

Phosphatidylcholine exchange between the boundary lipid and bilayer domains in cytochrome oxidase containing membranes.

A phospholipid spin label, 16-doxylphosphatidylcholine, is employed in a study of lipid--protein interactions in cytochrome oxidase containing membranes. Two methods are used to label the membranous cytochrome oxidase: dispersion in cholate with subsequent detergent removal, and fusion with vesicles of the pure phospholipid label in the absence of detergent. A fraction of the label is immobilized, which is calculated to fall in the range of 0.17--0.21 mg of phospholipid/mg of protein (0.15--0.19 after correction for lipids not extracted by chloroform--methanol). This narrow range of values is independent of methods of labeling, protein isolation, and lipid depletion within experimental error. When labeling by fusion is utilized, the patches of pure phosphatidylcholine spin label diffuse in the plane of the bilayer, become diluted, and demonstrate exchange with bound phospholipid. These observations are evidence that boundary lipid, as reflected by the partitioning of the phosphatidylcholine label, is in equilibrium with adjacent bilayer regions and that it consists of a relatively constant amount of phospholipid associated with the hydrophobic portion of the protein.     

Different oxidized phospholipid molecules unequally affect bilayer packing

The aim of this study was to gain more detailed knowledge about the effect of the presence of defined oxidized phospholipid molecules in phospholipid bilayers. After chromatographic and mass spectrometry analysis, the previously used product of the Fenton reaction with unsaturated lecithins proved to consist of a plethora of oxidatively modified lecithins, unuseful either for the detailed study of the effects brought about in the bilayer or as the source of defined oxidized phospholipid molecules. The latter, particularly 2-(ω-carboxyacyl)- and 2-(n-hydroperoxyacyl)-lecithins, can be more conveniently prepared by chemical or enzymatic synthesis rather than by chemical or physical oxidation. The effect of those molecules and of commercially available 12-hydroxy-stearic and dodecanedioic acid was studied in planar supported phospholipid bilayers (SPBs) by use of EPR spectrometry. The SPBs also contained 2-(5-doxylstearoyl)-lecithin as the spin probe, and the EPR spectral anisotropy loss, indicative of bilayer disordering, was measured as a function of the molar percentage of oxidized lipid. Most oxidized lipid molecules examined in this study were able to induce bilayer disordering, while hydroperoxyl group-bearing acyl chains appeared to be much less effective. It is concluded that the effects of different oxidized phospholipids on phospholipid bilayer structure cannot be generalized, as happens with batch-oxidized phospholipids, and that the use of defined oxidized phospholipid molecular species for membrane oxidative stress guarantees a more reliable and detailed response.     

Supported planar bilayer formation by vesicle fusion: the interaction of phospholipid vesicles with surfaces and the effect of gramicidin on bilayer properties using atomic force microscopy

We have used magnetic alternating current mode atomic force microscopy (MAC-AFM) to investigate the formation of supported phospholipid bilayers (SPB) by the method of vesicle fusion. The systems studied were dioleoylphosphatidylcholine (DOPC) on mica and mica modified with 3-aminopropyl-triethoxy-silane (APTES), and DOPC vesicles with gramicidin incorporated on mica and APTES-modified mica. The AFM images reveal three stages of bilayer formation: localized disklike features that are single bilayer footprints of the vesicles, partial continuous coverage, and finally complete bilayer formation. The mechanism of supported phospholipid bilayers formation is the fusion of proximal vesicles, rather than surface disk migration. This mechanism does not appear to be affected by incorporation of gramicidin or by surface modification. Once formed, the bilayer develops circular defects one bilayer deep. These defects grow in size and number until a dynamic equilibrium is reached.     

Solute partitioning into lipid bilayer membranes

We have measured the membrane/water partition coefficients of benzene into lipid bilayers as a function of the surface density of the phospholipid chains. A simple 2H NMR method was used for the measurement of surface densities; it is shown to give results similar to those obtained from more demanding X-ray diffraction measurements. We observe that benzene partitioning into the bilayer is dependent not only on the partitioning chemistry, characterized by the oil/water partition coefficient, but also on the surface density of the bilayer chains. Increasing surface density leads to solute exclusion: benzene partitioning decreases by an order of magnitude as the surface density increases from 50% to 90% of its maximum value, a range readily accessible in bilayers and biomembranes under physiological conditions. This effect is independent of the nature of the agent used to alter surface density: temperature, cholesterol, and phospholipid chain length were tested here. These observations support the recent statistical thermodynamic theory of solute partitioning into chain molecule interphases, which predicts that the expulsion of solute is due to entropic effects of the orientational ordering among the phospholipid chains. We conclude that the partitioning of solutes into bilayer membranes, which are interfacial phases, is of a fundamentally different nature than partitioning into bulk oil and octanol phases.     

Different oxidized phospholipid molecules unequally affect bilayer packing

The aim of this study was to gain more detailed knowledge about the effect of the presence of defined oxidized phospholipid molecules in phospholipid bilayers. After chromatographic and mass spectrometry analysis, the previously used product of the Fenton reaction with unsaturated lecithins proved to consist of a plethora of oxidatively modified lecithins, useless either for the detailed study of the effects brought about in the bilayer or as the source of defined oxidized phospholipid molecules. The latter, particularly 2-(omega-carboxyacyl)- and 2-(n-hydroperoxyacyl)-lecithins, can be more conveniently prepared by chemical or enzymatic synthesis rather than by chemical or physical oxidation. The effect of those molecules and of commercially available 12-hydroxy-stearic and dodecanedioic acid was studied in planar supported phospholipid bilayers (SPBs) by use of EPR spectrometry. The SPBs also contained 2-(5-doxylstearoyl)-lecithin as the spin probe, and the EPR spectral anisotropy loss, indicative of bilayer disordering, was measured as a function of the molar percentage of oxidized lipid. Most oxidized lipid molecules examined in this study were able to induce bilayer disordering, while hydroperoxyl group-bearing acyl chains appeared to be much less effective. It is concluded that the effects of different oxidized phospholipids on phospholipid bilayer structure cannot be generalized, as happens with batch-oxidized phospholipids, and that the use of defined oxidized phospholipid molecular species for membrane oxidative stress guarantees a more reliable and detailed response.     

Hybrid bilayer membranes in air and water: infrared spectroscopy and neutron reflectivity studies.

In this report we describe the fabrication and characterization of a phospholipid/alkanethiol hybrid bilayer membrane in air. The bilayer is formed by the interaction of phospholipid with the hydrophobic surface of a self-assembled alkanethiol monolayer on gold. We have characterized the resulting hybrid bilayer membrane in air using atomic force microscopy, spectroscopic ellipsometry, and reflection-absorption infrared spectroscopy. These analyses indicate that the phospholipid added is one monolayer thick, is continuous, and exhibits molecular order which is similar to that observed for phospholipid/phospholipid model membranes. The hybrid bilayer prepared in air has also been re-introduced to water and characterized using neutron reflectivity and impedance spectroscopy. Impedance data indicate that when moved from air to water, hybrid bilayers exhibit a dielectric constant and thickness that is essentially equivalent to hybrid bilayers prepared in situ by adding phospholipid vesicles to alkanethiol monolayers in water. Neutron scattering from these samples was collected out to a wave vector transfer of 0.25 A(-1), and provided a sensitivity to changes in total layer thickness on the order of 1-2 A. The data confirm that the acyl chain region of the phospholipid layer is consistent with that observed for phospholipid-phospholipid bilayers, but suggest greater hydration of the phospholipid headgroups of HBMs than has been reported in studies of lipid multilayers.     

Membrane interactions of dynorphins

The dynorphins are primarily endogenous ligands to the kappa-opioid receptor, but a variety of non-opioid effects have also been observed, including direct effects on membranes. The peptides are rich in Arg residues, a characteristic feature of the cell-penetrating peptides. In this investigation, we have examined the interaction of the two peptides dynorphin A and dynorphin B with model membranes. A variety of NMR methods, as well as CD and fluorescence spectroscopy, have been used to characterize the structure of the two peptides and, more importantly, the position of the peptides in phospholipid bicelles. Both peptides interact to a large extent with both zwitterionic and partly negatively charged bicelles but are only marginally structured in either solvent. Dynorphin A was found to insert its N-terminus into the bilayer of the bicelle, while dynorphin B was found to reside on the surface of the bilayer. Despite the high degree of similarity in the sequence of the two peptides, it has previously been observed that dynorphin A has membrane perturbing effects and causes leakage of calcein from large unilamellar phospholipid vesicles while dynorphin B has no such effects. Our results provide a possible explanation for the difference in membrane perturbation.