Optimization of ultrasound-accelerated synthesis of enzymatic octyl hydroxyphenylpropionate by response surface methodology

The ultrasound-accelerated enzymatic synthesis of octyl hydroxyphenylpropionate (OHPP) from p-hydroxyphenylpropionic acid (HPPA) and octanol was investigated in this study. A commercially available immobilized lipase from Candida antarctica, Novozym 435, was used as the biocatalyst. A three-level-three-factor Box-Behnken design experiment and response surface methodology were used to evaluate the effects of temperature, reaction time, and enzyme activity on percent yield of OHPP. The results indicated that temperature and enzyme activity significantly affected percent yield, whereas reaction time did not. A model for the synthesis of OHPP was established. Based on a ridge max analysis, the optimum conditions for OHPP synthesis were predicted to use a reaction temperature of 58.8°C, a reaction time of 14.6 h, and an enzyme activity of 410.5 PLU with a yield of 98.5%. A reaction was performed under these optimal conditions, and a yield of 97.5% ± 0.1% was obtained.     

Lipase-catalyzed synthesis of precursor dipeptides of RGD in aqueous water-miscible organic solvents

PPL-catalyzed synthesis of the precursor dipeptides of RGD as a cellular adhesion factor, Benzyl-Arg-Gly-NH2 and CBZ-Gly-Asp-NH2, was conducted in water-organic cosolvents systems. Five water-miscible organic solvents, which have some advantage over the water-immiscible organic solvent systems or the anhydrous organic solvent systems used often in protease-catalyzed synthesis of a peptide bond, were tested. The reaction condition of PPL-catalyzed synthesis of the dipeptides was optimized by examining the main factors affecting the product yield. The optimal reaction condition for the synthesis of Benzyl-Arg-Gly-NH2 was set up as pH 8.0, 15 degrees C in 40% MeOH for 10 h with the maximum yield of 73.6%. The optimum condition for the synthesis of CBZ-Gly-Asp-NH2 was pH 7.0, 15 degrees C in 50% MeOH for 10h with the maximum yield of 67.0%.     

A convenient synthetic method of a 5,7-diarylcyclopenteno-[1,2-b]pyridine-6-carboxylate: a key intermediate for potent endothelin receptor antagonists

A convenient method for the synthesis of the title intermediate 4 was described. The key steps of this synthesis involved: (1) regioselective addition reaction of arylzinc reagent to quinolic anhydride in 42% isolated yield, (2) conversion of a ketoacid to an enone, which was achieved in 65% yield by intramolecular Knoevenagel reaction of beta-ketoester generated by condensation of an acid imidazolide with an ester enolate, followed by dehydration assisted with silica gel, and (3) stereoselective reduction of an allyl alcohol in 75% yield with zinc under acidic conditions. This synthesis enabled us to provide hundreds of grams of without chromatographic purification.     

Enzymatic peptide synthesis in organic media: a comparative study of water-miscible and water-immiscible solvent systems.

Peptide synthesis was carried out in a variety of organic solvents with low contents of water. The enzyme was deposited on the support material, celite, from an aqueous buffer solution. After evaporation of the water the biocatalyst was suspended in the reaction mixtures. The chymotrypsin-catalyzed reaction between Z-Phe-OMe and Leu-NH2 was used as a model reaction. Under the conditions used ([Z-Phe-OMe]0 less than or equal to 40 mM, [Leu-NH2]0/([Z-Phe-OMe]0 = 1.5) the reaction was first order with respect to Z-Phe-OMe. Tris buffer, pH 7.8, was the best buffer to use in the preparation of the biocatalyst. In water-miscible solvents the reaction rate increased with increasing water content, but the final yield of peptide decreased due to the competing hydrolysis of Z-Phe-OMe. Among the water-miscible solvents, acetonitrile was the most suitable, giving 91% yield with 4% (by vol.) water. In water-immiscible solvents the reaction rate and the product distribution were little affected by water additions in the range between 0% and 2% (vol. %) in excess of water saturation. The reaction rates correlated well with the log P values of the solvent. The highest yield (93%) was obtained in ethyl acetate; in this solvent the reaction was also fast. Under most reaction conditions used the reaction product was stable; secondary hydrolysis of the peptide formed was normally negligible. The method presented is a combination of kinetically controlled peptide synthesis (giving high reaction rates) and thermodynamically controlled peptide synthesis (giving stable reaction products).     

Synthesis of alkylgalactosides using whole cells of Bacillus pseudofirmus species as catalysts

Whole cells of alkaliphilic Bacillus pseudofirmus AR-199, induced for beta-galactosidase activity, were used for the synthesis of 1-hexyl-beta-d-galactoside and 1-octyl-beta-d-galactoside, respectively, by transglycosylation reaction between lactose and the corresponding alcohol acceptor. The product yield was strongly influenced by the initial water content in the reaction mixture. Water content of 10% (v/v) was optimal providing 3.6-36 mM hexyl galactoside from 10 to 150 mM lactose, and no secondary product hydrolysis. Product yield could be enhanced by supplementing the reaction mixture with more cells or partly replacing the product with fresh substrate, but was decreased with time to the initial equilibrium level. Cell permeabilisation or disruption resulted in increased reaction rate and higher product yield but was followed by product hydrolysis. Octyl galactoside synthesis using whole cells was optimal at water content of 2% (v/v) with a yield of 26%. The cells were immobilised in cryogels of polyvinyl alcohol for use in continuous process, where hexyl galactoside was produced with a constant yield of 50% from 50mM lactose for at least a week.     

用木瓜蛋白酶及固定化木瓜蛋白酶拆分DL-苯丙氨酸

为了将手性化合物D-苯丙氨酸和L-苯丙氨酸进行分离,利用木瓜蛋白酶及固定化木瓜蛋白酶催化的方法对其拆分．试验结果表明,用DL-苯丙氨酸合成N-乙酰-DL-苯丙氨酸,得率为88.7％．木瓜蛋白酶、海藻酸钠 壳聚糖固定化木瓜蛋白酶(IPSAC)、尼龙布固定化木瓜蛋白酶(IPN)催化合成N-乙酰-L-苯丙氨酰苯胺时,对催化合成过程影响最大的因素分别是溶液中的离子强度、溶液中的离子强度、反应温度;溶液中的离子强度与pH对合成的影响较大．本试验得出分别用木瓜蛋白酶、IPSAC、IPN催化合成N-乙酰-L-苯丙氨酰苯胺的3个最佳方案;用此3个方案合成时,产率分别为61.2%、54.7%、36.3%．N-乙酰-L-苯丙氨酰苯胺水解生成L-苯丙氨酸,产率59.2%,光学纯度为96.6％．N-乙酰-D-苯丙氨酸水解生成D-苯丙氨酸,产率61.7%,光学纯度为95.7％．     

Enzymatic synthesis of betulinic acid ester as an anticancer agent: Optimization study

Abstract

Immobilized Candida antarctica lipase, Novozym 435, was used to catalyze the esterification reaction between betulinic acid and phthalic anhydride to synthesize 3-O-phthalyl betulinic acid in n-hexane/chloroform. Response surface methodology based on a five-level, four-variable central composite rotatable design was employed to evaluate the effects of synthesis parameters such as reaction time, reaction temperature, enzyme amount and substrate molar ratio on the yield of ester. Based on the response surface model, the optimal enzymatic synthesis conditions were predicted to be: reaction time 20.3 h, reaction temperature 53.9°C, enzyme amount 145.6 mg, betulinic acid to phthalic anhydride molar ratio 1:1.11. The predicted yield was 65.8% and the actual yield was 64.7%.     

Synthesis of alkylgalactosides using whole cells of Bacillus pseudofirmus species as catalysts

Whole cells of alkaliphilic Bacillus pseudofirmus AR-199, induced for β-galactosidase activity, were used for the synthesis of 1-hexyl-β- -galactoside and 1-octyl-β- -galactoside, respectively, by transglycosylation reaction between lactose and the corresponding alcohol acceptor. The product yield was strongly influenced by the initial water content in the reaction mixture. Water content of 10% (v/v) was optimal providing 3.6–36 mM hexyl galactoside from 10 to 150 mM lactose, and no secondary product hydrolysis. Product yield could be enhanced by supplementing the reaction mixture with more cells or partly replacing the product with fresh substrate, but was decreased with time to the initial equilibrium level. Cell permeabilisation or disruption resulted in increased reaction rate and higher product yield but was followed by product hydrolysis. Octyl galactoside synthesis using whole cells was optimal at water content of 2% (v/v) with a yield of 26%. The cells were immobilised in cryogels of polyvinyl alcohol for use in continuous process, where hexyl galactoside was produced with a constant yield of 50% from 50 mM lactose for at least a week.     

Direct solid-phase synthesis of octreotide conjugates: precursors for use as tumor-targeted radiopharmaceuticals.

Somatostatin analogues, such as octreotide, are useful for the visualization and treatment of tumors. Unfortunately, these compounds were produced synthetically using complex and inefficient procedures. Here, we describe a novel approach for the synthesis of octreotide and its analogues using p-carboxybenzaldehyde to anchor Fmoc-threoninol to solid phase resins. The reaction of the two hydroxyl groups of Fmoc-threoninol with p-carboxybenzaldehyde was catalyzed with p-toluenesulphonic acid in chloroform using a Dean-Stark apparatus to form Fmoc-threoninol p-carboxybenzacetal in 91% yield. The Fmoc-threoninol p-carboxybenzacetal acted as an Fmoc-amino acid derivative and the carboxyl group of Fmoc-threoninol p-carboxybenzacetal was coupled to an amine-resin via a DCC coupling reaction. The synthesis of protected octreotide and its conjugates were carried out in their entirety using a conventional Fmoc protocol and an autosynthesizer. The acetal was stable during the stepwise elongation of each Fmoc-amino acid as shown by the averaged coupling yield (> 95%). Octreotide (74 to 78% yield) and five conjugated derivatives were synthesized with high yields using this procedure, including three radiotherapy octreotides (62 to 75% yield) and two cellular markers (72 to 76% yield). This novel approach provides a strategy for the rapid and efficient large-scale synthesis of octreotide and its analogues for radiopharmaceutical and tagged conjugates.     

Enzymatic preparation of cefaclor with immobilized penicillin acylase

Enzymatic syntheses of cefaclor by immobilized penicillin acylase under kinetic control were carried out. According to the initial reaction rate ratio of synthesis to hydrolysis (Vs/Vh), penicillin acylase from Alcaligenes faecalis was chosen as the suitable catalyst for the synthesis of cefaclor. The reaction conditions, such as temperature, pH, and substrate concentration were investigated based on their Vs/Vh values. In the process of preparing cefaclor, in situ product removal (ISPR) and acyl donor feeding were used to achieve high yield. At the optimal conditions, the yield of cefaclor was 90%. In addition, the product were separated and purified, the total yield of cefaclor was 61%.     

Short synthesis of a benzyl ether-protected building block for the synthesis of carbocyclic galactopyranose mimics

A versatile intermediate for the synthesis of galactose-mimicking carbasugars was synthesised from tetrabenzyl galactose in five steps and 30% overall yield. The reaction sequence uses an l-proline-mediated aldol reaction as key step. The reaction sequence was run on several grams of material.     

Enzymatic synthesis of the precursor of Leu-enkephalin in water-immiscible organic solvent systems.

The precursor of Leu-enkephalin, Z-L-TyrGlyGly-L-Phe-L-LeuOEt, was synthesized from amino acid derivatives with three proteinases without the protection of the side chain of L-Tyr. First, Z-GlyGlyOBut and Z-L-TyrGlyGlyOBut were synthesized in quite a high yield, 83% and 99%, in an aqueous/organic biphasic system by papain and alpha-chymotrypsin, respectively. Then, Z-L-Phe-L-LeuOEt was synthesized by thermolysin from Z-L-Phe and L-LeuOEt either in buffer or in a biphasic system; the yields were 95% and 100%, respectively. The synthesis of Z-L-TyrGlyGly-L-Phe-L-LeuOEt from Z-L-TyrGlyGly and L-Phe-L-LeuOEt was performed effectively by thermolysin immobilized on Amberlite XAD-7 in a buffer and in an aqueous/organic biphasic system, as well as in saturated ethyl acetate, while the yield was low in reactions by free thermolysin. In the reaction with the immobilized enzyme (IME) in saturated ethyl acetate, the maximum yield of the precursor of Leu-enkephalin was 68%. The reasons for effective synthesis with IME are: (1) higher concentration of L-Phe-L-LeuOEt inside support, which resulted in rising the rate of the synthesis reaction and protecting the competitive hydrolysis of Z-L-TyrGlyGly by thermolysin, (2) entrapment of the product inside the support where thermolysin could not act in the case of reaction in buffer, and (3) extraction of the product with the organic solvent in the case of reaction in a biphasic system or in saturated organic solvent.     

Biodiesel synthesis in a solvent-free system by recombinant Rhizopus oryzae: comparative study between a stirred tank and a packed-bed batch reactor

A simultaneous synthesis of biodiesel, as fatty acid methyl esters, and monoacylglycerols catalysed by the recombinant Rhizopus oryzae lipase immobilized by adsorption on Relizyme OD/403M is presented. The use of this 1(3)-positional specific lipase prevents the formation of glycerol as a by-product, thus avoiding its drawbacks. The synthesis was carried out in a solvent-free system and it has been studied in two different reactor systems: stirred tank and packed-bed reactor. Stirred tank reactor presented a high-initial reaction rate and achieved a 33.6% yield, which corresponds to a value of 50.4% of the maximum yield that can be achieved with a 1(3)-positional specific lipase. In packed-bed reactor there was a smaller initial reaction rate, but it was achieved a 49.1% yield, which corresponds to a 73.6% of the maximum yield. When a second batch is performed, the yield decreased only 4% when packed-bed reactor is employed whereas a drastic decrease is observed in a stirred tank operation. Therefore, packed-bed reactor showed a best performance and minor damage to the biocatalyst.     

Improved octyl glucoside synthesis using immobilized β-glucosidase on PA-M with reduced glucose surplus inhibition

A β-glucosidase extracted from bitter almond (Prunus dulcis var. amara) was immobilized on polyamine microspheres (PA-M) for catalytic octyl glucoside (OG) synthesis from glucose and octanol through reversed hydrolysis. The immobilization increased the activity of enzyme at pH 6.0–7.0, and the optimal reaction temperature for immobilized enzyme was identical to the free enzyme. The thermal stability and solvent tolerance of enzyme were increased by its immobilization. In the co-solvent system using 10% t-butyl alcohol and 10% (v/v) water, the yield of OG was increased by 1.7-fold compared to the yield from the system without co-solvent. Based on dynamic and Dixon plot analyses, the initial reaction velocity (V₀) increased approximately three-fold on immobilization and the OG synthesis was inhibited by surplus glucose. The inhibition dissociation constants for free and immobilized enzyme were 219?mM and 116?mM, respectively. A fed-batch mode was applied in the OG synthesis to minimize substrate inhibition. After 336?h of reaction, the OG yield and the conversion rate of glucose reached 134?mM and 59.6%, respectively. Compared to the batch operation, the fed-bath operation increased the OG yield and the conversion rate of glucose by 340% and 381%, respectively.     

Protease-catalyzed synthesis of a precursor dipeptide, Z-Asp-Val-NH2 of thymopentin, in organic solvents

The protease-catalyzed, kinetically controlled synthesis of a precursor dipeptide, Z-Asp-Val-NH(2) of thymopentin (TP-5), in organic solvents was studied. Z-Asp-OMe and Val-NH(2) were used as the acyl donor and the nucleophile, respectively. An industrial alkaline protease alcalase was used to catalyze the synthesis of the target dipeptide in water-organic cosolvent systems. The conditions of the synthesis reaction were optimized by examining the effects of several factors, including organic solvents, water content, temperature, pH, and reaction time on the yield of Z-Asp-Val-NH(2). The optimum conditions using alcalase as the catalyst are pH 10.0, 35 degrees C, in acetonitrile/Na(2)CO(3)-NaHCO(3) buffer system (9:1, V/V), reaction time 5 h, with a yield of 63%. The dipeptide product was confirmed by LC- MS.     

Enantioselective carbon-hydrogen insertion is an effective and efficient methodology for the synthesis of (R)-(-)-baclofen

A highly enantioselective methodology for the synthesis of the GABA(B) receptor agonist (R)-(-)-baclofen is described. This synthesis begins with p-chlorophenethyl alcohol and involves a catalytic carbon-hydrogen insertion reaction of a chiral dirhodium(II) carboxamidate with the corresponding diazoacetate (81% yield, 95% ee). Subsequent steps convert the intermediate gamma-lactone to (R)- (-)-baclofen in a 60% overall yield. The amount of catalyst required for the C-H insertion transformation is only 0.5 mol%.     

Synthesis of a precursor dipeptide of thymopentin in organic solvents by an enzymatic method

The protease-catalyzed, kinetically controlled synthesis of a precursor dipeptide of thymopentin(TP-5), Z-Arg-Lys-NH2 in organic solvents was studied. Z-Arg-OMe was used as the acyl donor and Lys-NH2 was used as the nucleophile. An industrial alkaline protease alcalase and trypsin were used to catalyze the synthesis of the target dipeptide in water-organic cosolvent systems. The conditions of the synthesis reaction were optimized by examining the effects of several factors, including organic solvents, water content, temperature, pH, and reaction time on the yield of Z-Arg-Lys-NH2. The optimum conditions using alcalase as the catalyst are pH 10.0, 35 degrees C, in acetonitrile/DMF/Na2CO3-NaHCO3 buffer system (80:10:10, V/V), 6 h, with the dipeptide yield of 71.1%. Compared with alcalase, the optimum conditions for trypsin are pH 8.0, 35 degrees C, in ethanol/Tris-HCl buffer system (80:20, V/V), 4 h, with the dipeptide yield of 76.1%.     

Phomenolactone,an antifungal substance from phoma lingam

The structure of phomenolactone, an antifungal substance isolated from the fungus Phoma lingam was established by reaction of phomenoic acid with dipyrridyl 2,2′-isulphide in the presence of triphenylphosphine (yield 90%). Anhydrophomenolactone is obtained as a secondary product during this synthesis in a yield of 10%.     

Improvement of enzymatic synthesis yields of flavour acetates: The example of the isoamyl acetate

Summary Isoamyl acetate synthesis was chosen as a model to improve flavour acetate yields by optimising the enzymatic reaction. Alcohol:acid molar ratio, temperature, water content and amount of enzyme effects were analyzed. The optimum values were respectively 4, 45°C, 0,1% (w/v) and 0,5 g. In these conditions, the synthesis yield reached 80 % after 24 h of reaction and was found 15 times greater than those already reported in the literature.     

Alanine synthesis from glyceraldehyde and ammonium ion in aqueous solution

Summary Alanine is formed under anaerobic conditions from glyceraldehyde and ammonium ion in aqueous solutions of sodium phosphate (pH 7.0) or imidazole-imidazolium chloride (pH 7.0) at ambient temperature. In 500 mM imidazole (pH 7.0), alanine synthesis from 10 mM glyceraldehyde and 15 mM ammonium ion is roughly 6 times more rapid in the presence of 10 mM 3-mercaptopropionate (0.62% yield at 60 days) than in its absence (0.10% yield at 60 days). Likewise, the formation of alanine in 500 mM sodium phosphate (pH 7.0) from 5 mM glyceraldehyde and 10 mM ammonium ion is more rapid in the presence of 10 mM N-acetylcysteine than in its absence. In this reaction with N-acetylcysteine, the ratio of the yield of alanine to the yield of lactate is fairly constant. The yield of alanine is about 4.5% that of lactate. Alanine synthesis in the presence of thiol probably proceeds via alanyl thioester, which is produced by rearrangement of the imine of the hemithioacetal of pyruvaldehyde, a product of glyceraldehyde dehydration. The significance of this reaction for molecular evolution is discussed.