Solution structure of SWI1 AT-rich interaction domain from Saccharomyces cerevisiae and its nonspecific binding to DNA

SWI1 is a subunit of the SWI/SNF complex involved in chromatin remodeling. It contains an AT-rich interaction domain (ARID) which has the potential DNA binding activity. In this study, we determined the solution structure of the SWI1 ARID domain from Saccharomyces cerevisiae by nuclear magnetic resonance spectroscopy. Yeast SWI1 ARID domain is composed of seven alpha helices, six of which are conserved among the ARID family. In addition, the DNA-binding activity of the SWI1 ARID domain was confirmed by chemical shift perturbation assay. Similar to its human homolog, the yeast SWI1 ARID domain binds DNA nonspecifically.     

Crystal structure of the chromodomain helicase DNA-binding protein 1 (Chd1) DNA-binding domain in complex with DNA

Chromatin remodelers are ATP-dependent machines that dynamically alter the chromatin packaging of eukaryotic genomes by assembling, sliding, and displacing nucleosomes. The Chd1 chromatin remodeler possesses a C-terminal DNA-binding domain that is required for efficient nucleosome sliding and believed to be essential for sensing the length of DNA flanking the nucleosome core. The structure of the Chd1 DNA-binding domain was recently shown to consist of a SANT and SLIDE domain, analogous to the DNA-binding domain of the ISWI family, yet the details of how Chd1 recognized DNA were not known. Here we present the crystal structure of the Saccharomyces cerevisiae Chd1 DNA-binding domain in complex with a DNA duplex. The bound DNA duplex is straight, consistent with the preference exhibited by the Chd1 DNA-binding domain for extranucleosomal DNA. Comparison of this structure with the recently solved ISW1a DNA-binding domain bound to DNA reveals that DNA lays across each protein at a distinct angle, yet contacts similar surfaces on the SANT and SLIDE domains. In contrast to the minor groove binding seen for Isw1 and predicted for Chd1, the SLIDE domain of the Chd1 DNA-binding domain contacts the DNA major groove. The majority of direct contacts with the phosphate backbone occur only on one DNA strand, suggesting that Chd1 may not strongly discriminate between major and minor grooves.     

Highly repeated sites in the apolipoprotein(a) gene recognized by methylated DNA-binding protein, a sequence-specific DNA-binding protein.

Methylated DNA-binding protein (MDBP), a sequence-specific DNA-binding protein, was found to recognize more than 30 sites within an allele of the human apolipoprotein(a) gene. High plasma levels of apolipoprotein(a), a risk factor for atherosclerosis, have been correlated with genetically inherited lower-molecular-mass isoforms of this protein. MDBP might help down modulate the expression of the apolipoprotein(a) gene in a manner dependent on the length of a given allele of the gene and the number of MDBP sites in it.     

Identification of AML-1 and the (8;21) translocation protein (AML-1/ETO) as sequence-specific DNA-binding proteins: the runt homology domain is required for DNA binding and protein-protein interactions.

The AML1 gene on chromosome 21 is disrupted in the (8;21)(q22;q22) translocation associated with acute myelogenous leukemia and encodes a protein with a central 118-amino-acid domain with 69% homology to the Drosophila pair-rule gene, runt. We demonstrate that AML-1 is a DNA-binding protein which specifically interacts with a sequence belonging to the group of enhancer core motifs, TGT/cGGT. Electrophoretic mobility shift analysis of cell extracts identified two AML-1-containing protein-DNA complexes whose electrophoretic mobilities were slower than those of complexes formed with AML-1 produced in vitro. Mixing of in vitro-produced AML-1 with cell extracts prior to gel mobility shift analysis resulted in the formation of higher-order complexes. Deletion mutagenesis of AML-1 revealed that the runt homology domain mediates both sequence-specific DNA binding and protein-protein interactions. The hybrid product, AML-1/ETO, which results from the (8;21) translocation and retains the runt homology domain, both recognizes the AML-1 consensus sequence and interacts with other cellular proteins.     

Energetics of interaction of oligopeptide (lac 53-57) with DNA base sequences and origin of sequence-specific recognition

Computer model building with a dynamic energy minimization procedure is used here to study the interaction of a pentapeptide sequence from the lac repressor headpiece (lac 53-57) with different base sequences of DNA. The peptide fragment for this purpose was considered in the classical beta-antiparallel as well as the beta-associated conformation. The model of its interaction with DNA was optimised for various binding positions and base sequences. Partitioning of energy is analysed for different dielectric constant values and the main contributing factors to sequence-specific binding are discussed.     

Crystal Structure of the Ubiquitin-like Domain-CUT Repeat-like Tandem of Special AT-rich Sequence Binding Protein 1 (SATB1) Reveals a Coordinating DNA-binding Mechanism

SATB1 is essential for T-cell development and growth and metastasis of multitype tumors and acts as a global chromatin organizer and gene expression regulator. The DNA binding ability of SATB1 plays vital roles in its various biological functions. We report the crystal structure of the N-terminal module of SATB1. Interestingly, this module contains a ubiquitin-like domain (ULD) and a CUT repeat-like (CUTL) domain (ULD-CUTL tandem). Detailed biochemical experiments indicate that the N terminus of SATB1 (residues 1–248, SATB1^(1–248)), including the extreme 70 N-terminal amino acids, and the ULD-CUTL tandem bind specifically to DNA targets. Our results show that the DNA binding ability of full-length SATB1 requires the contribution of the CUTL domain, as well as the CUT1-CUT2 tandem domain and the homeodomain. These findings may reveal a multiple-domain-coordinated mechanism whereby SATB1 recognizes DNA targets.     

Molecular determinants for DNA minor groove recognition: design of a bis-guanidinium derivative of ethidium that is highly selective for AT-rich DNA sequences

The phenanthridinium dye ethidium bromide is a prototypical DNA intercalating agent. For decades, this anti-trypanosomal agent has been known to intercalate into nucleic acids, with little preference for particular sequences. Only polydA-polydT tracts are relatively refractory to ethidium intercalation. In an effort to tune the sequence selectivity of known DNA binding agents, we report here the synthesis and detailed characterization of the mode of binding to DNA of a novel ethidium derivative possessing two guanidinium groups at positions 3 and 8. This compound, DB950, binds to DNA much more tightly than ethidium and exhibits distinct DNA-dependent absorption and fluorescence properties. The study of the mode of binding to DNA by means of circular and electric linear dichroism revealed that, unlike ethidium, DB950 forms minor groove complexes with AT sequences. Accurate quantification of binding affinities by surface plasmon resonance using A(n)T(n) hairpin oligomer indicated that the interaction of DB950 is over 10-50 times stronger than that of ethidium and comparable to that of the known minor groove binder furamidine. DB950 interacts weakly with GC sites by intercalation. DNase I footprinting experiments performed with different DNA fragments established that DB950 presents a pronounced selectivity for AT-rich sites, identical with that of furamidine. The replacement of the amino groups of ethidium with guanidinium groups has resulted in a marked gain of both affinity and sequence selectivity. DB950 provides protection against DNase I cleavage at AT-containing sites which frequently correspond to regions of enhanced cleavage in the presence of ethidium. Although DB950 maintains a planar phenanthridinium chromophore, the compound no longer intercalates at AT sites. The guanidinium groups of DB950, just like the amidinium group of furamidine (DB75), are the critical determinants for recognition of AT binding sites in DNA. The chemical modulation of the ethidium exocyclic amines is a profitable option to tune the nucleic acid recognition properties of phenylphenanthridinium dyes.     

Structure of the chloroplast signal recognition particle (SRP) receptor: domain arrangement modulates SRP-receptor interaction

The signal recognition particle (SRP) pathway mediates co-translational targeting of nascent proteins to membranes. Chloroplast SRP is unique in that it does not contain the otherwise universally conserved SRP RNA, which accelerates the association between the SRP guanosine-5′-triphosphate (GTP) binding protein and its receptor FtsY in classical SRP pathways. Recently, we showed that the SRP and SRP receptor (SR) GTPases from chloroplast (cpSRP54 and cpFtsY, respectively) can interact with one another 400-fold more efficiently than their bacterial homologues, thus providing an explanation as to why this novel chloroplast SRP pathway bypasses the requirement for the SRP RNA. Here we report the crystal structure of cpFtsY from Arabidopsis thaliana at 2.0 Å resolution. In this chloroplast SR, the N-terminal “N” domain is more tightly packed, and a more extensive interaction surface is formed between the GTPase “G” domain and the N domain than was previously observed in many of its bacterial homologues. As a result, the overall conformation of apo-cpFtsY is closer to that found in the bacterial SRP•FtsY complex than in free bacterial FtsY, especially with regard to the relative orientation of the N and G domains. In contrast, active-site residues in the G domain are mispositioned, explaining the low basal GTP binding and hydrolysis activity of free cpFtsY. This structure emphasizes proper N-G domain arrangement as a key factor in modulating the efficiency of SRP-receptor interaction and helps account, in part, for the faster kinetics at which the chloroplast SR interacts with its binding partner in the absence of an SRP RNA.     

Base coupling in sequence-specific site recognition by the ETS domain of murine PU.1

The ETS domain of murine PU.1 tolerates a large number of DNA cognates bearing a central consensus 5'-GGAA-3' that is flanked by a diverse combination of bases on both sides. Previous attempts to define the sequence selectivity of this DNA binding domain by combinatorial methods have not successfully predicted observed patterns among in vivo promoter sequences in the genome, and have led to the hypothesis that energetic coupling occurs among the bases in the flanking sequences. To test this hypothesis, we determined, using thermodynamic cycles, the complex stabilities and base coupling energies of the PU.1 ETS domain for a set of 26 cognate variants (based on the lambdaB site of the Ig(lambda)2-4 enhancer, 5'-AATAAAAGGAAGTGAAACCAA-3') in which flanking sequences up to three bases upstream and/or two bases downstream of the core consensus are substituted. We observed that both cooperative and anticooperative coupling occurs commonly among the flanking sequences at all the positions investigated. This phenomenon extends at least three bases in the 5' side and is, at least on our experimental data, due exclusively to pairwise interactions between the flanking bases, and not changes in the local environment of the DNA groove floor. Energetic coupling also occurs between the flanking sides across the core consensus, suggesting long-range conformational effects along the DNA target and/or in the protein. Our data provide an energetic explanation for the pattern of flanking bases observed among in vivo promoter sequences and reconcile the apparent discrepancies raised by the combinatorial experiments. We also discuss the significance of base coupling in light of an indirect readout mechanism in ETS/DNA site recognition.