P(HPMA/EGDMA) beads grafted with fibrous chains by SI-ATRP method: agmatine functionalized affinity beads for selective separation of serum albumin

In this paper, novel core–shell polymeric affinity beads based on fibrous grafting and functionalization with a salt resistance affinity ligand were developed to separate and deplete serum albumin (SA) from human serum. Poly(hydroxypropyl methacrylate/ethyleneglycole dimethacrylate), p(HPMA/EGDMA), beads were prepared via suspension polymerization, and were grafted with poly(glycidyl methacrylate) (p(GMA)) via surface-initiated atom transfer radical polymerization (SI-ATRP) method. The grafted p(GMA) fibrous chains on the beads were modified with an affinity ligand (i.e., agmatine). The binding capacity of the affinity beads to SA was determined using aqueous solution of SA in a batch system. Batch adsorption studies showed that the amount of adsorbed SA was found to be 156.7 mg/g at 25 °C. The maximum adsorption capacity for affinity beads was observed at around pH 5.5. Adsorption of SA onto affinity beads significantly increased with increasing temperature, and reached a value 177.8 mg/g beads at 35 °C. The equilibrium data were found to be well described by Langmuir model, while the kinetic data were well fitted to the pseudo-second-order kinetic. The degree of the purity of SA was determined by using HPLC. Before and after adsorption, the peak areas of SA were used in the calculation of separated SA.     

Kinetics of invertase immobilised on poly(phe-lys) coated polystyrene beads

Summary Surface of polystyrene beads was modified by poly(phe-lys) for invertase immobilisation. The optimum immobilisation conditions of invertase were; 0.01% (w/v) poly(phe-lys), 2% (v/v) glutaraldehyde at 25 °C and pH 4.5. The kinetics of sucrose hydrolysis by free and immobilised invertase in a batch reactor at pH 4.5 and 55 °C gave K_m and V_max values for sucrose with free and immobilised invertase of 81, 114 mM and 10.1, 9.2 mol glucose/min.mg enzyme, respectively. The deactivation rate constants of free and immobilised invertase were 0.0347 and 0.0098 min^–1, respectively.     

Monosize poly(glycidyl methacrylate) beads for dye-affinity purification of lysozyme

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for purification of lysozyme from chicken egg white. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by a dispersion polymerization technique. The content of epoxy groups on the surface of the poly(GMA) sample determined by the HCl-pyridine method (3.8 mmol/g). Cibacron Blue F3GA loading was 1.73 mmol/g. The monosize beads were characterized by elemental analysis, FTIR and SEM. Adsorption studies were performed under different conditions in a batch system (i.e., medium pH, protein concentration, temperature and ionic strength). Maximum lysozyme adsorption amount of poly(GMA) and poly(GMA)-Cibacron Blue F3GA beads were 1.6 and 591.7 mg/g, respectively. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium adsorption capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. It was observed that after 10 adsorption-elution cycle, poly(GMA)-Cibacron Blue F3GA beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg-white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purity of the eluted lysozyme was analyzed by SDS-PAGE and found to be 88% with recovery about 79%. The specific activity of the eluted lysozyme was high as 43,600 U/mg.     

Poly(vinyl alcohol) functionalized poly(dimethylsiloxane) solid surface for immunoassay

In this communication, we describe a simple and robust method for the covalent bonding of poly(vinyl alcohol) (PVA) on a silanized poly(dimethylsiloxane) (PDMS) surface. Nonspecific adsorption of proteins via hydrophobic-hydrophobic interactions of the PVA-coated surface is greatly reduced, and biomolecules can be rapidly anchored on the PVA-coated surface with high loading and uniformity. On the basis of a sandwich immunoassay with the anti-rabbit IgG and IgG pair as a model, the detection limit for IgG is down to 1 pg/mL with linearity up to 11 microg the levels often encountered in biological, forensic, and environmental samples.     

Superparamagnetic poly(methyl methacrylate) beads for nattokinase purification from fermentation broth

An effective method for purification of nattokinase from fermentation broth using magnetic poly(methyl methacrylate) (PMMA) beads immobilized with p-aminobenzamidine was proposed in this study. Firstly, magnetic PMMA beads with a narrow size distribution were prepared by spraying suspension polymerization. Then, they were highly functionalized via transesterification reaction with polyethylene glycol. The surface hydroxyl-modified magnetic beads obtained were further modified with chloroethylamine to transfer the surface amino-modified magnetic functional beads. The morphology and surface functionality of the magnetic beads were examined by scanning electron microscopy and Fourier transform infrared. An affinity ligand, p-aminobenzamidine was covalently immobilized to the amino-modified magnetic beads by the glutaraldehyde method for nattokinase purification directly from the fermentation broth. The purification factor and the recovery of the enzyme activity were found to be 8.7 and 85%, respectively. The purification of nattokinase from fermentation broth by magnetic beads only took 40 min, which shows a very fast purification of nattokinase compared to traditional purification methods.     

Chitosan gel beads immobilized Cu (II) for selective adsorption of amino acids

Chitosan (CS) gel beads were prepared by using phase inversion and precipitation technique. The gel beads could bind copper (II), by which Cu (II) ion-immobilized chitosan gel beads (CS-Cu²⁺ gel beads) were prepared, and the amount of the immobilized Cu (II) was about 35 mg/g when the CS gel beads were incubated in 150 ppm cupric sulfate solution. The CS-Cu²⁺ gel beads could selectively adsorb histidine (His) from the mixed solution containing His and tryptophan (Trp); and the selective coefficient which was defined as the adsorbed amount ratio of His to Trp was about 8.0 at the pH value of 7.4. The effect of the pH value on the amino acid adsorption was also studied. In order to investigate the relationship of the amino acid adsorption and protein adsorption, the adsorbed amounts for IgG and albumin were determined; and the results indicated that the CS-Cu²⁺ gel beads could adsorb a larger amount of IgG than albumin due to the larger amount of the exposed residual His. The study provided a sorbent and a method to selectively remove His and IgG.     

Immobilization and stabilization of papain on poly(hydroxyethyl methacrylate-ethylenglycol dimethacrylate) beads grafted with epoxy functional polymer chains via surface-initiated-atom transfer radical polymerization (SI-ATRP)

Poly(hydroxyethyl methacrylate–ethylen glycol dimethacrylate), p(HEMA–EGDMA), beads were prepared by suspension polymerization, and were decorated with fibrous poly(glycidyl methacrylate), p(GMA), via surface initiated-atom transfer radical polymerization (SI-ATRP). The functional epoxy groups of the beads were used for covalent immobilization of papain. The average amount of immobilized enzyme was 18.7 mg/g beads. The immobilized enzyme was characterized by temperature, pH, operational and storage stability experiments. The maximum velocity of the free and immobilized enzymes (V_max) and Michaelis–Menten constant (K_m) values were determined as 10.7 and 8.3 U/mg proteins and 274 and 465 μM, respectively. The immobilized papain was operated in a batch reactor, and it was very effective for hydrolysis of different proteins (i.e., casein and cytochrom c).     

Tailored poly(2-oxazoline) polymer brushes to control protein adsorption and cell adhesion

POx bottle-brush brushes (BBBs) are synthesized by SIPGP of 2-isopropenyl-2-oxazoline and consecutive LCROP of 2-oxazolines on 3-aminopropyltrimethoxysilane-modified silicon substrates. The side chain hydrophilicity and polarity are varied. The impact of the chemical composition and architecture of the BBB upon protein (fibronectin) adsorption and endothelial cell adhesion are investigated and prove extremely low protein adsorption and cell adhesion on BBBs with hydrophilic side chains such as poly(2-methyl-2-oxazoline) and poly(2-ethyl-2-oxazoline). The influence of the POx side chain terminal function upon adsorption and adhesion is minor but the side chain length has a significant effect on bioadsorption.     

Poly(I):poly(C)-enhanced alveolar and peritoneal macrophage phagocytosis: quantification by a new method utilizing fluorescent beads

Phagocytosis is an important immune function to quantify. This immune response may be modulated by exposure to biological response modifiers or by exposure to pollutants. A new technique for quantifying nonspecific phagocytosis of alveolar and peritoneal macrophages in the same animal has been developed that utilizes fluorescent polystyrene beads. When incorporated into inhalation studies, this technique can be used to determine whether the toxic effect of an inhaled pollutant is local (effect on alveolar macrophages), systemic (effect on peritoneal macrophages), or both local and systemic. This method results in a determination of both the level of phagocytosis (the percentage of phagocytic macrophages) and the macrophage specific activity (the number of beads phagocytized per macrophage). This method also allows a determination of adherence by quantifying the number of particles in contact with, but not phagocytized by, the macrophage. Macrophage preparations were incubated with fluorescent beads for 2 hr and cyto-centrifuged onto a glass slide. Fluorescent beads present on the slide or cell-associated but not ingested by phagocytosis were removed by immersing the slide containing the macrophage preparation in methylene chloride for 15-30 sec. Fluorescent beads ingested by phagocytosis were then easily quantified with a fluorescence microscope. This technique was used to assess the baseline levels of phagocytosis for rat alveolar and peritoneal macrophages from the same animal and the kinetics and level of enhanced phagocytosis for alveolar and peritoneal macrophages after injection with the interferon inducer polyinosinate-polycytidylate (poly(I):poly(C)). The kinetics of enhanced alveolar and peritoneal macrophage phagocytosis by poly(I):poly(C) were similar; however, stimulated phagocytic levels of peritoneal macrophages never reached the phagocytic activity observed for the resident, highly phagocytic alveolar macrophages. This elevated phagocytic activity is most likely due to interferon stimulated by particulate matter in the large volume of air processed by the lungs and is important for host defense against a number of different inhaled microorganisms.     

Antibacterial activities of poly(amidoamine) dendrimers terminated with amino and poly(ethylene glycol) groups

Poly(amidoamine) (PAMAM) dendrimer derivatives have been investigated for their biological applications, especially for delivery of drugs, including antimicrobial drugs to eukaryotic cells, but their effects on bacterial cells are largely unexplored. Herein we report that amino-terminated PAMAM dendrimers are highly toxic to the common Gram-negative pathogen Pseudomonas aeruginosa. The concentration that kills 50% of the bacteria (EC50) was in the range of approximately 0.9-1.5 microg/mL for the generation 5, amino-terminated dendrimers with or without partial (43%) coating of poly(ethylene glycol) (PEG). These EC50 values were lower than that ( approximately 1.9-2.8 microg/mL) for LL-37, a potent antimicrobial peptide expressed in a variety of epithelia. On the contrary, the dendrimers were far less toxic (EC50 > 21 microg/mL) to the Gram-positive pathogen Staphylococcus aureus than LL-37 (EC50 = approximately 1.9 microg/mL). In agreement with the previous studies on other cell types, the dendrimers were not cytotoxic to human corneal epithelial cells at the concentrations that were toxic to P. aeruginosa. Our findings indicate that amino-terminated PAMAM dendrimers and their partially PEG-coated derivatives possess attractive antimicrobial properties, particularly against Gram-negative bacteria, thus expanding the potential biological application of the dendrimers.     

Production of microspheres with surface amino groups from blends of Poly(Lactide-co-glycolide) and Poly(epsilon-CBZ-L-lysine) and use for encapsulation.

Microspheres were formed from blends of the biodegradable polymer poly(DL-lactic-co-glycolic acid) (PLGA) together with poly(epsilon-CBZ-L-lysine) (PCBZL) by a double-emulsification/solvent evaporation technique. The size of the microspheres formed by this method was dependent both on the total concentration of the polymers and on the ratio of PLGA to PCBZL. The use of the microspheres for encapsulation was demonstrated by the inclusion of a solution of Texas Red fluorescent dye. Lysine epsilon-amino groups on the surface of the microspheres were deprotected by acid hydrolysis or lithium/liquid ammonia reduction. Acid hydrolysis damaged the surface of the microspheres as assessed by scanning electron microscopy, whereas deprotection by lithium/ammonia produced less damage and allowed the retention of encapsulated dye solution. The surface lysine groups made available on the surface of the microspheres could be used to covalently link a variety of biologically active molecules to alter their in vivo properties and allow targeting to specific cell types.     

Use of magnetic poly(glycidyl methacrylate) monosize beads for the purification of lysozyme in batch system

The hydrophobic affinity ligand L-tryptophan immobilized magnetic poly(glycidyl methacrylate) [m-poly(GMA)] beads in monosize form (1.6 microm in diameter) were used for the affinity purification of lysozyme from chicken egg white. The m-poly(GMA) beads were prepared by dispersion polymerization in the presence of Fe3O4 nano-powder. The epoxy groups of the m-poly(GMA) beads were converted into amino groups with 1,6 diaminohexane (i.e., spacer arm). l-tryptophan was then covalently immobilized on spacer arm attached m-poly(GMA) beads. Elemental analysis of immobilised L-tryptophan for nitrogen was estimated as 42.5 micromol/g polymer. Adsorption studies were performed under different conditions in a batch system (i.e., medium pH, protein concentration and temperature). Maximum lysozyme adsorption amount of m-poly(GMA) and m-poly(GMA)-L-tryptophan beads were 1.78 and 259.6 mg/g, respectively. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium adsorption capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. It was observed that after 10 adsorption-elution cycle, m-poly(GMA)-L-tryptophan beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. It was found to be successful in achieving purification of lysozyme in a high yield of 76% with a purification fold of 71 in a single step. The specific activity of the eluted lysozyme (62,580 U/mg) was higher than that obtained with a commercially available pure lysozyme (Sigma (60,000 U/mg).     

Hyperbranched poly(amino ester)s with different terminal amine groups for DNA delivery

Hyperbranched poly(amino ester)s containing tertiary amines in the core and primary, secondary, and tertiary amines in the periphery, respectively, were evaluated for DNA delivery in vitro. The same core structure facilitated the investigation on the effects of the terminal amine type on the properties of hyperbranched poly(amino ester)s for DNA delivery. The hydrolysis of the poly(amino ester)s was monitored using (1)H NMR. The results reflected that the terminal amine type had negligible effects on the hydrolysis rate but was much slower than that of linear poly(amino ester)s, probably due to the compact hyperbranched spatial structure preventing the accessibility of water. In comparison with PEI 25 K, the hyperbranched poly(amino ester)s showed much lower cytotoxicity in Cos7, HEK293, and HepG2 cells. Gel electrophoresis indicated that poly(amino ester)s could condense DNA efficiently, and the zeta potentials and sizes of the complexes formed with different weight ratios of hyperbranched poly(amino ester)s and DNA were measured. Remarkably, all the hyperbranched poly(amino ester)s showed DNA transfection efficiency comparable to PEI 25 K in Cos7, HEK293, and HepG2 cells regardless of the terminal amine type. Therefore, the terminal amine type had insignificant effects on the hydrolysis rate, cytotoxicity, DNA condensation capability, and in vitro DNA transfection efficiency of the hyperbranched poly(amino ester)s.     

Poly(gamma-L-diaminobutanoic acid), a novel poly(amino acid), coproduced with poly(epsilon-L-lysine) by two strains of Streptomyces celluloflavus

Two poly(ɛ- l -lysine) (ɛ-PL) producer strains of Streptomyces celluloflavus secreted a novel polymeric substance into their culture broths along with ɛ-PL. Three types of HPLC analysis plus one- and two-dimensional ¹H and ¹³C nuclear magnetic resonance experiments revealed that the secreted substance was poly(γ- l -diaminobutanoic acid) (γ-PAB), an l -α,γ-diaminobutanoic acid ( l -DAB) homopolymer linking between γ-amino and α-carboxylic acid functional groups. The γ-PABs from the two strains had an identical chemical structure, and the same number-average molecular weight of 2100–2200. No copolymers composed of the two amino acids l -DAB and l- lysine were found in either of the broths from the producers. Both strains coproduced high levels of the two poly(amino acid)s in the presence of SO₄²⁻ at pH 4.0 and 4.5 L min⁻¹ aeration in a 5-L jar fermentor. γ-PAB exhibited strong inhibitory activities against various yeasts and weaker actions against bacteria than ɛ-PL. γ-PAB may have various biological functions similar to ɛ-PL, and the use of γ-PAB along with ɛ-PL would be advantageous for technical applications in various fields.     

Poly(styrene-divinylbenzene) beads surface functionalized with di-block polymer grafting and multi-modal ligand attachment: performance of reversibly immobilized lipase in ester synthesis

Fibrous poly(styrene-b-glycidylmethacrylate) brushes were grafted on poly(styrene–divinylbenzene) (P(S–DVB)) beads using surface-initiated atom transfer radical polymerization. Tetraethyldiethylenetriamine (TEDETA) ligand was incorporated on P(GMA) block. The ligand attached beads were used for reversible immobilization of lipase. The influences of pH, ionic strength, and initial lipase concentration on the immobilization capacities of the beads have been investigated. Lipase adsorption capacity of the beads was about 78.1 mg/g beads at pH 6.0. The K _m value for immobilized lipase was about 2.1-fold higher than that of free enzyme. The thermal, and storage stability of the immobilized lipase also was increased compared to the native lipase. It was observed that the same support enzyme could be repeatedly used for immobilization of lipase after regeneration without significant loss in adsorption capacity or enzyme activity. A lipase from Mucor miehei immobilized on styrene–divinylbenzene copolymer was used to catalyze the direct esterification of butyl alcohol and butyric acid.     

Patterning of cells on functionalized poly(dimethylsiloxane) surface prepared by hydrophobin and collagen modification

Controllable cell growth on poly(dimethylsiloxzne) (PDMS) surface is important for its potential applications in biodevices. Herein, we developed a fully biocompatible approach for patterning of cells on the PDMS surface by hydrophobin (HFBI) and collagen modification. HFBI and collagen were immobilized on the PDMS surface one after another by using copper grids as a mask. HFBI self-assembly on PDMS surface converted the PDMS surface from hydrophobic to hydrophilic, which facilitated the following immobilization of collagen. Collagen had admirable ability to support cell adhesion and growth. Consequently, the HFBI/collagen-modified PDMS surface could promote cell adhesion and growth. What is more, the native PDMS surface did not support cell adhesion and growth. Patterning of cells was achieved by directly culturing 293T cells (the human embryonic kidney cell line) on the PDMS surface patterned with HFBI/collagen. Further studies by means of gene transfection experiment in vitro showed that the patterned cells were of good bioactivities. Herein, the biocompatible preparation of cell patterns on the PDMS surface could be of many applications in biosensor device fabrication.     

A comparative study: Immobilization of yeast cells and invertase in poly(ethyleneoxide) electrodes

Yeast cells (Saccharomyces cerevisiae) and invertase enzyme were immobilized in thiophene capped poly(ethyleneoxide)/polypyrrole (PEO-co-PPy) and 3-methylthienyl methacrylate-co-p-vinyl benzyloxy poly(ethyleneoxide)/polypyrrole (CP-co-PPy) matrices. Immobilization of the enzyme and yeast cells was performed via entrapment in conducting copolymers during electrochemical polymerization of pyrrole through the thiophene moiety of the polymers. Maximum reaction rates, Michaelis–Menten constants, optimum temperature and pH values, operational and storage stabilities of the enzyme and yeast cell electrodes were investigated.     

Synthesis of poly(ADP-ribose)-agarose beads: an affinity resin for studying (ADP-ribose)n-protein interactions.

Polymers of ADP-ribose bind chromatosomal histones in solution and may play a role in chromatin accessibility in vivo. We have enzymatically synthesized a poly(ADP-ribose) affinity resin to further characterize binding of nuclear proteins to ADP-ribose polymers. NAD+- and (ADP-ribose)-derivatized agarose beads were recognized as polymer acceptors by the nuclear enzyme poly(ADP-ribose) polymerase. This polymerase elongated the existing ligands by successive addition of exogenously available ADP-ribose residues to form polymers covalently linked to the agarose beads. Poly(ADP-ribose) formation on the beads was dependent on incubation time and the mode of ligand attachment to the agarose. The resulting poly(ADP-ribose)-derivatized agarose beads possessed polymers which closely resembled those modifying the ADP-ribose polymerase by the automodification reaction. Fractionation of rat liver nuclear lysate over the poly(ADP-ribose) resin revealed a strong affinity of H1 for ADP-ribose polymers, thereby supporting a role for poly(ADP-ribose) in chromatin functions. Poly(ADP-ribose)-agarose beads are extremely stable and will be useful not only for affinity studies, but also for mechanistic studies involving polymer elongation and catabolism.     

Binary immobilization of tyrosinase by using alginate gel beads and poly(acrylamide-co-acrylic acid) hydrogels

The use of the immobilized and the stable enzymes has immense potential in the enzymatic analysis of clinical, industrial and environmental samples. However, their widespread uses are limited due to the high cost of their production. In this study, binary immobilization of tyrosinase by using Ca-alginate and poly(acrylamide-co-acrylic acid) [P(AAm-co-AA)] was investigated. Maximum reaction rate (Vmax) and Michaelis-Menten constant (Km) were determined for the free and binary immobilized enzymes. The effects of pH, temperature, storage stability, reuse number and thermal stability on the free and immobilized tyrosinase were also examined. For the free and binary immobilized enzymes on Ca-alginate and P(AAm-co-AA), optimum pH was found to be 7 and 5, respectively. Optimum temperature of the free and immobilized enzymes was observed to be 30 and 35 degrees C, respectively. Reuse number, storage and thermal stability of the free tyrosinase were increased by a result of binary immobilization.