The tyrosine recombinase MrpA and its target sequence: a mutational analysis of the recombination site mrpS resulting in a new left element/right element (LE/RE) deletion system

MrpA is the multimer resolution protein of the Streptomyces coelicolor A3(2) plasmid SCP2*. Previously, MrpA was found to be a site-specific tyrosine recombinase that acts with the 36-bp recombination site mrpS. The present report gives a comprehensive characterization of the composition as well as the position of the spacer and MrpA binding sites within mrpS. Experiments revealed a spacer consisting of 6 remarkably variable nucleotides in the middle of the mrpS-site. A reduction in the spacer to 5 nucleotides abolished recombination. Investigation of the MrpA binding sites showed the importance of its 15 nucleotides on an effective recombination. Among almost randomly exchangeable nucleotides, two nucleotides were identified as essential for MrpA binding. Alteration of either of these nucleotides led to a reduction in MrpA binding down to 2 % or even to no binding. Based on these results, a new left element/right element (LE/RE) deletion system was developed. The constructed heteromeric mrpS-sites are efficiently resolved by MrpA. The resulting double mutated (LE/RE) site can no longer be used as a recombination site by MrpA. The system has been successfully applied for the generation of multiple-targeted deletions in the genome of E. coli.     

A new site-specific recombinase-mediated system for targeted multiple genomic deletions employing chimeric loxP and mrpS sites

A newly designed site-specific recombination system is presented which allows multiple targeted markerless deletions. The most frequently used tool for removing selection markers or to introduce genes by recombination-mediated cassette exchange is the Cre/loxP system. Many mutant loxP sites have been created for this purpose. However, this study presents a chimeric mutant loxP site denoted mroxP-site. The mroxP site consists of one Cre (loxP/2) and one MrpA (mrpS/2) binding site separated by a palindromic 6-bp spacer sequence. Two mroxP-sites can be recombined by Cre recombinase in head-to-tail as well as in head-to-head orientation. In the head-to-head orientation and the loxP half-sites inside, Cre removes the loxP half-sites during site-specific recombination, creating a new site, mrmrP. The new site is essentially a mrpS site with a palindromic spacer and cannot be used by Cre for recombination anymore. It does, however, present a substrate for the recombinase MrpA. This new system has been successfully applied introducing multiple targeted gene deletions into the Escherichia coli genome. Similar to Cre/loxP and FLP/FRT, this system may be adapted for genetic engineering of other pro- and eukaryotes.     

Site-specific deletions in the tomato genome by the CinH-<Emphasis Type="Italic">RS2</Emphasis> and ParA-<Emphasis Type="Italic">MRS</Emphasis> recombination systems

We have tested the CinH-RS2 and ParA-MRS site-specific deletion systems in tomato (Solanum lycopersicum L.). The ParA-MRS system is derived from the broad-host-range plasmid RK2, where the 222 aa ParA recombinase recognizes a 133 bp multimer resolution site (MRS). The CinH-RS2 system is derived from Acinetobacter plasmids pKLH2 and pKLH204, where the 188 amino acid CinH recombinase recognizes a 113-bp recombination site known as RS2. In this study, target lines containing a DNA segment flanked by recombination sites were crossed to recombinase-expressing lines producing CinH or ParA recombinase. CinH-mediated recombination of RS2 substrates was detected in 2 of 3 F₁ plants that harbor both the target and recombinase loci. On the other hand, recombination mediated by ParA was not detected among F₁ plants, but was found among 13 of 47 F₂ plants. These data show that both systems can mediate site-specific DNA deletion in the tomato genome, and, upon further refinement, can provide additional molecular tools for tomato improvement through precise genome manipulation. As the target construct also contains additional recombination sites for site-specific integration by other recombination systems, these tomato lines could be used for future testing of gene stacking through site-specific integration.     

Characterization of the Integration and Modular Excision of the Integrative Conjugative Element PAISt in Streptomyces turgidiscabies Car8

PAISt is a large genomic island located in the chromosome of the plant pathogen Streptomyces turgidiscabies Car8. The island carries clustered virulence genes, transfers to other Streptomyces species, and integrates by site-specific recombination at the 8 bp palindrome TTCATGAA. The palindrome is located at the 3′ end of the bacitracin resistance gene (bacA). We demonstrate that PAISt is able to excise in modules by recombination of one internal and two flanking palindromic direct repeats. The gene intSt located at the 3( end of PAISt encodes a tyrosine recombinase. Site-specific recombination activity of intSt was tested and confirmed by heterologous expression in Streptomyces coelicolor. Comparative analysis of PAISt homologues in Streptomyces scabies 87–22 and Streptomyces acidiscabies 84–104 indicates that these islands have been fixed by sequence erosion of intSt and the recombination sites.     

TcpM: a novel relaxase that mediates transfer of large conjugative plasmids from Clostridium perfringens

Conjugative transfer of toxin and antibiotic resistance plasmids in Clostridium perfringens is mediated by the tcp conjugation locus. Surprisingly, neither a relaxase gene nor an origin of transfer (oriT) has been identified on these plasmids, which are typified by the 47 kb tetracycline resistance plasmid pCW3. The tcpM gene (previously called intP) encodes a potential tyrosine recombinase that was postulated to be an atypical relaxase. Mutagenesis and complementation studies showed that TcpM was required for wild‐type transfer of pCW3 and that a tyrosine residue, Y259, was essential for TcpM activity, which was consistent with the need for a relaxase‐mediated hydrophilic attack at the oriT site. Other catalytic residues conserved in tyrosine recombinases were not required for TcpM activity, suggesting that TcpM was not a site‐specific recombinase. Mobilization studies led to the identification of the oriT site, which was located in the 391 bp intergenic region upstream of tcpM. The oriT site was localized to a 150 bp region, and gel mobility shift studies showed that TcpM could bind to this region. Based on these studies we postulate that conjugative transfer of pCW3 involves the atypical relaxase TcpM binding to and processing the oriT site to initiate plasmid transfer.     

<Emphasis Type="Italic">Streptomyces</Emphasis> temperate bacteriophage integration systems for stable genetic engineering of actinomycetes (and other organisms)

ϕC31, ϕBT1, R4, and TG1 are temperate bacteriophages with broad host specificity for species of the genus Streptomyces. They form lysogens by integrating site-specifically into diverse attB sites located within individual structural genes that map to the conserved core region of streptomycete linear chromosomes. The target genes containing the ϕC31, ϕBT1, R4, and TG1 attB sites encode a pirin-like protein, an integral membrane protein, an acyl-CoA synthetase, and an aminotransferase, respectively. These genes are highly conserved within the genus Streptomyces, and somewhat conserved within other actinomycetes. In each case, integration is mediated by a large serine recombinase that catalyzes unidirectional recombination between the bacteriophage attP and chromosomal attB sites. The unidirectional nature of the integration mechanism has been exploited in genetic engineering to produce stable recombinants of streptomycetes, other actinomycetes, eucaryotes, and archaea. The ϕC31 attachment/integration (Att/Int) system has been the most widely used, and it has been coupled with the ϕBT1 Att/Int system to facilitate combinatorial biosynthesis of novel lipopeptide antibiotics in Streptomyces fradiae.     

Self-control in DNA site-specific recombination mediated by the tyrosine recombinase TnpI

Tn4430 is a distinctive transposon of the Tn3 family that encodes a tyrosine recombinase (TnpI) to resolve replicative transposition intermediates. The internal resolution site of Tn4430 (IRS, 116 bp) contains two inverted repeats (IR1 and IR2) at the crossover core site, and two additional TnpI binding motifs (DR1 and DR2) adjacent to the core. Deletion analysis demonstrated that DR1 and DR2 are not required for recombination in vivo and in vitro. Their function is to provide resolution selectivity to the reaction by stimulating recombination between directly oriented sites on a same DNA molecule. In the absence of DR1 and/or DR2, TnpI-mediated recombination of supercoiled DNA substrates gives a mixture of topologically variable products, while deletion between two wild-type IRSs exclusively produces two-noded catenanes. This demonstrates that TnpI binding to the accessory motifs DR1 and DR2 contributes to the formation of a specific synaptic complex in which catalytically inert recombinase subunits act as architectural elements to control recombination sites pairing and strand exchange. A model for the organization of TnpI/IRS recombination complex is presented.     

The unconventional Xer recombination machinery of Streptococci/Lactococci

Homologous recombination between circular sister chromosomes during DNA replication in bacteria can generate chromosome dimers that must be resolved into monomers prior to cell division. In Escherichia coli, dimer resolution is achieved by site-specific recombination, Xer recombination, involving two paralogous tyrosine recombinases, XerC and XerD, and a 28-bp recombination site (dif) located at the junction of the two replication arms. Xer recombination is tightly controlled by the septal protein FtsK. XerCD recombinases and FtsK are found on most sequenced eubacterial genomes, suggesting that the Xer recombination system as described in E. coli is highly conserved among prokaryotes. We show here that Streptococci and Lactococci carry an alternative Xer recombination machinery, organized in a single recombination module. This corresponds to an atypical 31-bp recombination site (dif_SL) associated with a dedicated tyrosine recombinase (XerS). In contrast to the E. coli Xer system, only a single recombinase is required to recombine dif_SL, suggesting a different mechanism in the recombination process. Despite this important difference, XerS can only perform efficient recombination when dif_SL sites are located on chromosome dimers. Moreover, the XerS/dif_SL recombination requires the streptococcal protein FtsK_SL, probably without the need for direct protein-protein interaction, which we demonstrated to be located at the division septum of Lactococcus lactis. Acquisition of the XerS recombination module can be considered as a landmark of the separation of Streptococci/Lactococci from other firmicutes and support the view that Xer recombination is a conserved cellular function in bacteria, but that can be achieved by functional analogs.     

Site-directed integration system using a combination of mutant <Emphasis Type="Italic">lox</Emphasis> sites for <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis>

The engineering of Corynebacterium glutamicum is important for enhanced production of biochemicals. To construct an optimal C. glutamicum genome, a precise site-directed gene integration method was developed by using a pair of mutant lox sites, one a right element (RE) mutant lox site and the other a left element (LE) mutant lox site. Two DNA fragments, 5.7 and 10.2 kb-long, were successfully integrated into the genome. The recombination efficiency of this system compared to that obtained by single crossover by homologous recombination was 2 orders of magnitude higher. Moreover, the integrated DNA remained stably maintained on removal of Cre recombinase. The Cre/mutant lox system thus represents a potentially attractive tool for integration of foreign DNA in the course of the engineering of C. glutamicum traits.     

Characterization of IntA,a Bidirectional Site-Specific Recombinase Required for Conjugative Transfer of the Symbiotic Plasmid of Rhizobium etli CFN42

Site-specific recombination occurs at short specific sequences, mediated by the cognate recombinases. IntA is a recombinase from Rhizobium etli CFN42 and belongs to the tyrosine recombinase family. It allows cointegration of plasmid p42a and the symbiotic plasmid via site-specific recombination between attachment regions (attA and attD) located in each replicon. Cointegration is needed for conjugative transfer of the symbiotic plasmid. To characterize this system, two plasmids harboring the corresponding attachment sites and intA were constructed. Introduction of these plasmids into R. etli revealed IntA-dependent recombination events occurring at high frequency. Interestingly, IntA promotes not only integration, but also excision events, albeit at a lower frequency. Thus, R. etli IntA appears to be a bidirectional recombinase. IntA was purified and used to set up electrophoretic mobility shift assays with linear fragments containing attA and attD. IntA-dependent retarded complexes were observed only with fragments containing either attA or attD. Specific retarded complexes, as well as normal in vivo recombination abilities, were seen even in derivatives harboring only a minimal attachment region (comprising the 5-bp central region flanked by 9- to 11-bp inverted repeats). DNase I-footprinting assays with IntA revealed specific protection of these zones. Mutations that disrupt the integrity of the 9- to 11-bp inverted repeats abolish both specific binding and recombination ability, while mutations in the 5-bp central region severely reduce both binding and recombination. These results show that IntA is a bidirectional recombinase that binds to att regions without requiring neighboring sequences as enhancers of recombination.     

Bacillus subtilis SalA is a phosphorylation‐dependent transcription regulator that represses scoC and activates the production of the exoprotease AprE

Bacillus subtilis Mrp family protein SalA has been shown to indirectly promote the production of the exoprotease AprE by inhibiting the expression of scoC, which codes for a repressor of aprE. The exact mechanism by which SalA influences scoC expression has not been clarified previously. We demonstrate that SalA possesses a DNA‐binding domain (residues 1–60), which binds to the promoter region of scoC. The binding of SalA to its target DNA depends on the presence of ATP and is stimulated by phosphorylation of SalA at tyrosine 327. The B. subtilis protein‐tyrosine kinase PtkA interacts specifically with the C‐terminal domain of SalA in vivo and in vitro and is responsible for activating its DNA binding via phosphorylation of tyrosine 327. In vivo, a mutant mimicking phosphorylation of SalA (SalA Y327E) exhibited a strong repression of scoC and consequently overproduction of AprE. By contrast, the non‐phosphorylatable SalA Y327F and the ΔptkA exhibited the opposite effect, stronger expression of scoC and lower production of the exoprotease. Interestingly, both SalA and PtkA contain the same ATP‐binding Walker domain and have thus presumably arisen from the common ancestral protein. Their regulatory interplay seems to be conserved in other bacteria.     

Evolution of variants of yeast site-specific recombinase Flp that utilize native genomic sequences as recombination target sites

As a tool in directed genome manipulations, site-specific recombination is a double-edged sword. Exquisite specificity, while highly desirable, makes it imperative that the target site be first inserted at the desired genomic locale before it can be manipulated. We describe a combination of computational and experimental strategies, based on the tyrosine recombinase Flp and its target site FRT, to overcome this impediment. We document the systematic evolution of Flp variants that can utilize, in a bacterial assay, two sites from the human interleukin 10 gene, IL10, as recombination substrates. Recombination competence on an end target site is acquired via chimeric sites containing mixed sequences from FRT and the genomic locus. This is the first time that a tyrosine site-specific recombinase has been coaxed successfully to perform DNA exchange within naturally occurring sequences derived from a foreign genomic context. We demonstrate the ability of an Flp variant to mediate integration of a reporter cassette in Escherichia coli via recombination at one of the IL10-derived sites.     

PhiC31 recombination system demonstrates heritable germinal transmission of site-specific excision from the <Emphasis Type="Italic">Arabidopsis</Emphasis> genome

Background  

The large serine recombinase phiC31 from broad host range Streptomyces temperate phage, catalyzes the site-specific recombination of two recognition sites that differ in sequence, typically known as attachment sites attB and attP. Previously, we characterized the phiC31 catalytic activity and modes of action in the fission yeast Schizosaccharomyces pombe.     

Mutagenesis of tyrosine residues within helix VII in subunit I of the cytochrome <Emphasis Type="Italic">cbb</Emphasis><Subscript>3</Subscript> oxidase from <Emphasis Type="Italic">Rhodobacter capsulatus</Emphasis>

The cbb ₃-type oxidases are members of the heme-copper oxidase superfamily, distant by sequence comparisons, but sharing common functional characteristics. The cbb ₃ oxidases are missing an active-site tyrosine residue that is absolutely conserved in all A and B-type heme-copper oxidases. This tyrosine is known to play a critical role in the catalytic mechanisms of A and B-type oxidases. The absence of this tyrosine in the cbb ₃ oxidases raises the possibility that the cbb ₃ oxidases utilize a different catalytic mechanism from that of the other members of the superfamily, or have this conserved residue in different helices. Recently sequence comparisons indicate that, a tyrosine residues that might be analogous to the active-site tyrosine in other oxidases are present in the cbb ₃ oxidases but these tyrosines originates from a different transmembrane helix within the protein. In this research, three conserved tyrosine residues, Y294, Y308 and Y318, in helix VII were substituted for phenylalanine. Y318F mutant in the Rhodobacter capsulatus oxidase resulted in a fully assembled enzyme with nativelike structure and activity, but Y294F mutant is not assembled and have a catalytic activity. On the other hand, Y308F mutant is fully assembled enzyme with nativelike structure, but lacking catalytic activity. This result indicates that Y308 should be crucial in catalytic activity of the cbb ₃ oxidase of R. capsulatus. These findings support the assumption that all of the heme-copper oxidases utilize the same catalytic mechanism and provide a residue originates from different places within the primary sequence for different members of the same superfamily.     

DNA recombination with a heterospecific Cre homolog identified from comparison of the pac-c1 regions of P1-related phages

Sequencing of the 7 kb immC region from four P1-related phages identified a novel DNA recombinase that exhibits many Cre-like characteristics, including recombination in mammalian cells, but which has a distinctly different DNA specificity. DNA sequence comparison to the P1 immC region showed that all phages had related DNA terminase, C1 repressor and DNA recombinase genes. Although these genes from phages P7, ϕw39 and p15B were highly similar to those from P1, those of phage D6 showed significant divergence. Moreover, the D6 sequence showed evidence of DNA deletion and substitution in this region relative to the other phages. Characterization of the D6 site-specific DNA recombinase (Dre) showed that it was a tyrosine recombinase closely related to the P1 Cre recombinase, but that it had a distinct DNA specificity for a 32 bp DNA site (rox). Cre and Dre are heterospecific: Cre did not catalyze recombination at rox sites and Dre did not catalyze recombination at lox sites. Like Cre, Dre catalyzed both integrative and excisive recombination and required no other phage-encoded proteins for recombination. Dre-mediated recombination in mammalian cells showed that, like Cre, no host bacterial proteins are required for efficient Dre-mediated site-specific DNA recombination.     

Single molecule TPM analysis of the catalytic pentad mutants of Cre and Flp site-specific recombinases: contributions of the pentad residues to the pre-chemical steps of recombination

Cre and Flp site-specific recombinase variants harboring point mutations at their conserved catalytic pentad positions were characterized using single molecule tethered particle motion (TPM) analysis. The findings reveal contributions of these amino acids to the pre-chemical steps of recombination. They suggest functional differences between positionally conserved residues in how they influence recombinase-target site association and formation of ‘non-productive’, ‘pre-synaptic’ and ‘synaptic’ complexes. The most striking difference between the two systems is noted for the single conserved lysine. The pentad residues in Cre enhance commitment to recombination by kinetically favoring the formation of pre-synaptic complexes. These residues in Flp serve a similar function by promoting Flp binding to target sites, reducing non-productive binding and/or enhancing the rate of assembly of synaptic complexes. Kinetic comparisons between Cre and Flp, and between their derivatives lacking the tyrosine nucleophile, are consistent with a stronger commitment to recombination in the Flp system. The effect of target site orientation (head-to-head or head-to-tail) on the TPM behavior of synapsed DNA molecules supports the selection of anti-parallel target site alignment prior to the chemical steps. The integrity of the synapse, whose establishment/stability is fostered by strand cleavage in the case of Flp but not Cre, appears to be compromised by the pentad mutations.     

ParA resolvase catalyzes site-specific excision of DNA from the Arabidopsis genome

The small serine resolvase ParA from bacterial plasmids RK2 and RP4 catalyzes the recombination of two identical 133 bp recombination sites known as MRS. Previously, we reported that ParA is active in the fission yeast Schizosaccharomyces pombe. In this work, the parA recombinase gene was placed under the control of the Arabidopsis OXS3 promoter and introduced into Arabidopsis lines harboring a chromosomally integrated MRS-flanked target. The ParA recombinase excised the MRS-flanked DNA and the excision event was detected in subsequent generations in the absence of ParA, indicating germinal transmission of the excision event. The precise site-specific deletion by the ParA recombination system in planta demonstrates that the ParA recombinase can be used to remove transgenic DNA, such as selectable markers or other introduced transgenes that are no longer desired in the final product.     

An accumulative site‐specific gene integration system using cre recombinase‐mediated cassette exchange

The Cre‐loxP system is frequently used for site‐specific recombination in animal cells. The equilibrium and specificity of the recombination reaction can be controlled using mutated loxPs. In the present study, we designed an accumulative site‐specific gene integration system using Cre recombinase and mutated loxPs in which the Cre‐mediated cassette exchange reaction is infinitely repeatable for target gene integration into loxP target sites. To evaluate the feasibility and usefulness of this system, a series of integration reactions were repeated and confirmed in vitro using Cre recombinase protein and plasmids. Accumulative gene integration was also performed on the genome of Chinese hamster ovary (CHO) cells. The results indicated that the system was applicable for repeated gene integration of multiple genes to the target sites on both plasmids and CHO cell genomes. This gene integration system provides a novel strategy for gene amplification and for biological analyses of gene function through the genetic modification of cells and organisms. Biotechnol. Bioeng. 2010;105: 1106–1114. © 2009 Wiley Periodicals, Inc.     

Functional expression of the Cre recombinase in actinomycetes

Site-specific recombinases revolutionized “in vivo” genetic engineering because they can catalyze precise excisions, integrations, inversions, or translocations of DNA between their distinct recognition target sites. We have constructed a synthetic gene encoding Cre recombinase with the GC content 67.7% optimized for expression in high-GC bacteria and demonstrated this gene to be functional in Streptomyces lividans. Using the synthetic cre(a) gene, we have removed an apramycin resistance gene flanked by loxP sites from the chromosome of S. lividans with 100% efficiency. Sequencing of the chromosomal DNA part showed that excision of the apramycin cassette by Cre recombinase was specific.