Polymorphic change of appressoria by the tomato powdery mildew Oidium neolycopersici on host tomato leaves reflects multiple unsuccessful penetration attempts

The appressorial shapes of the powdery mildews are an important clue to the taxonomy of the powdery mildew fungi, but the conidia of the tomato powdery mildew Oidium neolycopersici KTP-01 develop non-lobed, nipple-shaped, and moderately lobed or multilobed appressoria on the same leaves. To remove this ambiguity, we performed consecutive observations of sequential appressorial development of KTP-01 conidia with a high-fidelity digital microscope. Highly germinative conidia of KTP-01, collected from conidial pseudochains formed on the tomato leaves, were inoculated into host tomato and nonhost barley leaves or an artificial hydrophobic membrane (Parafilm). Events from germination initiation to appressorium formation were synchronous in all conidia on all materials used for inoculation, but post-appressorial behaviors varied among the materials. Appressoria on the membrane-stuck glass slide formed several projections at different portions of the appressoria to repeat unsuccessful penetration attempts. Similar unsuccessful penetration behavior by KTP-01 conidia was observed in the inoculations into leaves of barley plants, wild tomato species Lycopersicon peruvianum LA2172 (carrying the Ol-4 gene for powdery mildew resistance), and a susceptible host tomato (Lycopersicon esculentum) that had been inoculated with the barley powdery mildew (Blumeria graminis f. sp. hordei, race 1) conidia. On the barley leaves, all penetrations of KTP-01 were impeded by the papillae formed beneath the sites of the appressorial projections. On both the wild tomato and the race 1-inoculated cultivated tomato plants, KTP-01 conidia were prevented from forming functional haustoria by hypersensitive epidermal cell death; this hypersensitive reaction involved the Ol-4 gene in the wild tomato plants or the 'induced resistance' acquired by the nonpathogenic conidia previously inoculated into the cultivated tomato plants. All these KTP-01 conidia produced several projections on the appressoria during the repeated unsuccessful penetration attempts and eventually exhibited multilobed appressoria. On the host tomato leaves inoculated singly with KTP-01 conidia, fewer than 20% of the conidia located appressoria on the central part of target epidermal cells and succeeded in forming functional haustoria at the first penetration attempt without forming an appressorial projection. These conidia exhibited non-lobed appressoria. The remaining conidia, however, whose appressoria were located on/near the border of the target epidermal cells, were more likely to fail to penetrate at the first penetration, and then to develop additional projections for subsequent penetrations. Most conidia succeeded in forming functional haustoria at the second to fourth penetration attempts, but a few conidia failed to produce haustoria at all attempted penetrations. Eventually, the conidia that succeeded at the second penetration possessed a single appressorial projection (exhibiting the nipple-shaped appressoria), whereas the remaining conidia exhibited moderately lobed appressoria with two to four appressorial projections and multilobed appressoria, with more projections. Thus, the present study revealed that the basic shape of appressoria of KTP-01 was the non-lobed type, and that polymorphic changes of the appressoria occurred as a result of successive production of projections during repeated unsuccessful penetration attempts.     

Linked, if not the same, Mi-1 homologues confer resistance to tomato powdery mildew and root-knot nematodes

On the short arm of tomato chromosome 6, a cluster of disease resistance (R) genes have evolved harboring the Mi-1 and Cf genes. The Mi-1 gene confers resistance to root-knot nematodes, aphids, and whiteflies. Previously, we mapped two genes, Ol-4 and Ol-6, for resistance to tomato powdery mildew in this cluster. The aim of this study was to investigate whether Ol-4 and Ol-6 are homologues of the R genes located in this cluster. We show that near-isogenic lines (NIL) harboring Ol-4 (NIL-Ol-4) and Ol-6 (NIL-Ol-6) are also resistant to nematodes and aphids. Genetically, the resistance to nematodes cosegregates with Ol-4 and Ol-6, which are further fine-mapped to the Mi-1 cluster. We provide evidence that the composition of Mi-1 homologues in NIL-Ol-4 and NIL-Ol-6 is different from other nematode-resistant tomato lines, Motelle and VFNT, harboring the Mi-1 gene. Furthermore, we demonstrate that the resistance to both nematodes and tomato powdery mildew in these two NIL is governed by linked (if not the same) Mi-1 homologues in the Mi-1 gene cluster. Finally, we discuss how Solanum crops exploit Mi-1 homologues to defend themselves against distinct pathogens.     

Development of diagnostic PCR markers closely linked to the tomato powdery mildew resistance gene Ol-1 on chromosome 6 of tomato

Lycopersicon hirsutum G1.1560 is a wild accession of tomato that shows resistance to Oidium lycopersicum, a frequently occurring tomato powdery mildew. This resistance is largely controlled by an incompletely dominant gene Ol-1 near the Aps-1 locus in the vicinity of the resistance genes Mi and Cf-2/Cf-5. Using a new F₂ population (n=150) segregating for resistance, we mapped the Ol-1 gene more accurately to a location between the RFLP markers TG153 and TG164. Furthermore, in saturating the Ol-1 region with more molecular markers using bulked segregant analysis, we were able to identify five RAPDs associated with the resistance. These RAPDs were then sequenced and converted into SCAR markers: SCAB01 and SCAF10 were L. hirsutum-specific; SCAE16, SCAG11 and SCAK16 were L. esculentum-specific. By linkage analysis a dense integrated map comprising RFLP and SCAR markers near Ol-1 was obtained. This will facilitate a map-based cloning approach for Ol-1 and marker-assisted selection for powdery mildew resistance in tomato breeding. Received: 21 June 1999 / Accepted: 1 December 1999     

Tomato defense to Oidium neolycopersici: dominant Ol genes confer isolate-dependent resistance via a different mechanism than recessive ol-2

Tomato powdery mildew caused by Oidium neolycopersici has become a globally important disease of tomato (Lycopersicon esculentum). To study the defense responses of tomato triggered by tomato powdery mildew, we first mapped a set of resistance genes to O. neolycopersici from related Lycopersicon species. An integrated genetic map was generated showing that all the dominant resistance genes (Ol-1, Ol-3, Ol-4, Ol-5, and Ol-6) are located on tomato chromosome 6 and are organized in three genetic loci. Then, near-isogenic lines (NIL) were produced that contain the different dominant Ol genes in a L. esculentum genetic background. These NIL were used in disease tests with local isolates of O. neolycopersici in different geographic locations, demonstrating that the resistance conferred by different Ol genes was isolate-dependent and, hence, may be race-specific. In addition, the resistance mechanism was analyzed histologically. The mechanism of resistance conferred by the dominant Ol genes was associated with hypersensitive response, which varies in details depending on the Ol-gene in the NIL, while the mechanism of resistance governed by the recessive gene ol-2 on tomato chromosome 4 was associated with papillae formation.     

Stomatal lock-open, a consequence of epidermal cell death, follows transient suppression of stomatal opening in barley attacked by Blumeria graminis

Blumeria graminis f.sp. hordei (Bgh) attack disrupted stomatal behaviour, and hence leaf water conductance (g(l)), in barley genotypes Pallas and Ris?-S (susceptible), P01 (with Mla1 conditioning a hypersensitive response; HR), and P22 and Ris?-R (with mlo5 conditioning papilla-based penetration resistance). Inoculation caused some stomatal closure well before the fungus attempted infection. Coinciding with epidermal cell penetration, stomatal opening in light was also impeded, although stomata of susceptible and mlo5 lines remained largely able to close in darkness. Following infection, in susceptible lines stomata closed in darkness but opening in light was persistently impeded. In Ris?-R, stomata recovered nearly complete function by approximately 30 h after inoculation, i.e. after penetration resistance was accomplished. In P01, stomata became locked open and unable to close in darkness shortly after epidermal cells died due to HR. In the P22 background, mlo5 penetration resistance was often followed by consequential death of attacked cells, and here too stomata became locked open, but not until approximately 24 h after pathogen attack had ceased. The influence of epidermal cell death was localized, and only affected stomata within one or two cells distance. These stomata were unable to close not only in darkness but also after application of abscisic acid and in wilted leaves suffering drought. Thus, resistance to Bgh based on HR or associated with cell death may have previously unsuspected negative consequences for the physiological health of apparently 'disease-free' plants. The results are discussed in relation to the control of stomatal aperture in barley by epidermal cells.     

Naturally occurring broad-spectrum powdery mildew resistance in a Central American tomato accession is caused by loss of mlo function

The resistant cherry tomato (Solanum lycopersicum var. cerasiforme) line LC-95, derived from an accession collected in Ecuador, harbors a natural allele (ol-2) that confers broad-spectrum and recessively inherited resistance to powdery mildew (Oidium neolycopersici). As both the genetic and phytopathological characteristics of ol-2-mediated resistance are reminiscent of powdery mildew immunity conferred by loss-of-function mlo alleles in barley and Arabidopsis, we initiated a candidate-gene approach to clone Ol-2. A tomato Mlo gene (SlMlo1) with high sequence-relatedness to barley Mlo and Arabidopsis AtMLO2 mapped to the chromosomal region harboring the Ol-2 locus. Complementation experiments using transgenic tomato lines as well as virus-induced gene silencing assays suggested that loss of SlMlo1 function is responsible for powdery mildew resistance conferred by ol-2. In progeny of a cross between a resistant line bearing ol-2 and the susceptible tomato cultivar Moneymaker, a 19-bp deletion disrupting the SlMlo1 coding region cosegregated with resistance. This polymorphism results in a frameshift and, thus, a truncated nonfunctional SlMlo1 protein. Our findings reveal the second example of a natural mlo mutant that possibly arose post-domestication, suggesting that natural mlo alleles might be evolutionarily short-lived due to fitness costs related to loss of mlo function.     

Conidia of the tomato powdery mildew <Emphasis Type="Italic">Oidium neolycopersici</Emphasis> initiate germ tubes at a predetermined site

The emergence of germ tubes from the conidia of powdery mildew fungi is the first morphological event of the infection process, preceding appressoria formation, peg penetration and primary haustoria formation. Germination patterns of the conidia are specific in powdery mildew fungi and therefore considered useful for identification. In the present study, we examined conidial germination of the tomato powdery mildew Oidium neolycopersici KTP-01 in order to clarify whether germ tube emergence site in KTP-01 conidia is determined by the first contact of the conidia to leaves (as found for the conidia of barley powdery mildew), or alternatively is predetermined and is unrelated to contact stimulus. Highly germinative conidia of KTP-01 were collected from conidial pseudochains on conidiophores in colonies on tomato leaves using two methods involving an electrostatic spore attractor and a blower. In the electrostatic spore attraction method, the conidia were attracted to the electrified insulator probe of the spore collector—this being the first contact stimulus for the conidia. In addition, the blowing method was used as a model of natural infection; pseudochain conidia were transferred to detached leaves by air (1 m/s) from a blower. Thus, landing on the leaves was the first contact for the conidia. Furthermore, conidia were also blown onto an artificial membrane (Parafilm-coated glass slides forming a hydrophobic surface) or solidified agar plates in Petri dishes (hydrophilic surface). Eventually, almost all conidia on the probe and on tomato leaves or artificial hydrophobic and hydrophilic surfaces synchronously germinated within 6 h of incubation, indicating that the first contact of the conidia with any of the aforementioned substrata was an effective germination induction signal. Germ tube emergence sites were exclusively subterminal on the conidia. Moreover, the germ tubes emerged without any relation to the sites touched first on the conidia. Thus, the present study strongly indicates that conidia of O. neolycopersici produce germ tubes at a predetermined site.     

Characterization of a Listeria monocytogenes Scott A isolate with high tolerance towards high hydrostatic pressure

An isolate of L. monocytogenes Scott A that is tolerant to high hydrostatic pressure (HHP), named AK01, was isolated upon a single pressurization treatment of 400 MPa for 20 min and was further characterized. The survival of exponential- and stationary-phase cells of AK01 in ACES [N-(2-acetamido)-2-aminoethanesulfonic acid] buffer was at least 2 log units higher than that of the wild type over a broad range of pressures (150 to 500 MPa), while both strains showed higher HHP tolerance (piezotolerance) in the stationary than in the exponential phase of growth. In semiskim milk, exponential-phase cells of both strains showed lower reductions upon pressurization than in buffer, but again, AK01 was more piezotolerant than the wild type. The piezotolerance of AK01 was retained for at least 40 generations in rich medium, suggesting a stable phenotype. Interestingly, cells of AK01 lacked flagella, were elongated, and showed slightly lower maximum specific growth rates than the wild type at 8, 22, and 30 degrees C. Moreover, the piezotolerant strain AK01 showed increased resistance to heat, acid, and H(2)O(2) compared with the wild type. The difference in HHP tolerance between the piezotolerant strain and the wild-type strain could not be attributed to differences in membrane fluidity, since strain AK01 and the wild type had identical in situ lipid melting curves as determined by Fourier transform infrared spectroscopy. The demonstrated occurrence of a piezotolerant isolate of L. monocytogenes underscores the need to further investigate the mechanisms underlying HHP resistance of food-borne microorganisms, which in turn will contribute to the appropriate design of safe, accurate, and feasible HHP treatments.     

NtLRP1, a tobacco leucine-rich repeat gene with a possible role as a modulator of the hypersensitive response

Plant defense responses against pathogens often involve the restriction of the pathogen to its site of penetration achieved through the combined effects of the hypersensitive response (HR) and its tightly connected localized acquired resistance (LAR). The tobacco DD9-3 expressed sequence tag was previously isolated from a screen designed to isolate genes induced early during the HR, thus potentially involved in the induction/regulation of the HR or LAR. Translation of the open reading frame of DD9-3 revealed a leucine-rich repeat (LRR) domain highly homologous with the receptor domain of a receptor kinase, suggesting a potential function in signaling pathways. The full-length cDNA was cloned. It encodes a small (232 amino acids) LRR protein, designated Nicotiana tabacum leucine-rich protein 1 (NtLRP1), containing a signal peptide, four leucine zipper repeats, five LRR repeats, and a C-terminal domain rich in proline. NtLRP1 expression is induced early during the HR initiated by elicitins, Ralstonia solanacearum, or Tobacco mosaic virus. NtLRP1 coupled with the green fluorescent protein localizes to the endoplasmic reticulum (ER). Loss-of-function through virus-induced gene silencing or through RNA interference did not modify the elicitin-induced HR or LAR. Gain-of-function experiments through transient Agrobacterium tumefaciens-mediated NtLRP1 expression in tobacco leaves caused the suppression of the HR induced by 2 nM elicitin and delayed the HR when the elicitin was applied at higher concentrations. The results suggest that NtLRP1 acts as a modulator of the HR and that retention in the ER is essential for its function.     

<Emphasis Type="Italic">Fusarium sambucinum</Emphasis> isolate FS-94 induces resistance against fusarium wilt of tomato via activation and priming of a salicylic acid-dependent signaling system

The wheat rhizosphere-inhabiting nonpathogenic Fusarium sambucinum isolate FS-94 protected tomato from Fusarium wilt (F. oxysporum f. sp. lycopersici) in laboratory experiments. Seed soaking or immersion of seedling roots in a FS-94 spore suspension prior to inoculation with the pathogen delayed the appearance of wilt symptoms and significantly reduced disease severity in plants of a susceptible tomato cultivar. Quantification of fungal ergosterol in infected tomato showed that protection against wilt agent was related to limitation of the pathogen growth in plants exposed to FS-94. Incubation of tomato seedlings in a FS-94 spore suspension for 48 or 72 h led to plant protection and increased the salicylic acid (SA) concentration in their roots, suggesting that this isolate was involved in a plant-mediated mode of action and induced resistance. Soaking tomato seeds in the spore suspension did not induce SA accumulation in seedling roots, but nevertheless resulted in a significant reduction in wilt severity when the seedlings were challenged with the pathogen. In response to pathogen attack, the SA content in susceptible seedlings grown from FS-94-treated seeds started to increase within 1 day and remained elevated for 72 h. This suggests that F. sambucinum isolate FS-94 primed a SA-dependent signaling system in tomato.     

Identification and molecular mapping of a single Arabidopsis thaliana locus determining resistance to a phytopathogenic Pseudomonas syringae isolate

We present a model pathosystem to dissect genetically the disease resistance response of plants against phytopathogenic bacteria. The interaction between Pseudomonas syringae pathovar maculicola (Psm) and Arabidopsis thaliana displays phenotypic varia-ion which depends on the genotype of both partners. Compatible interactions are defined by sustained in-planta bacterial growth and are normally accompanied of their appearance. For compatible interactions, resistance is defined by limited in-planta bacterial growth accompanied by a typical 'hypersensitive response' (HR). We show that at least parts of this system fit the paradigms of Flor's 'gene-for-gene' hypothesis. We identify functionally a putative bacterial avirulence gene (avrRpm 1) from a Psm isolate which conditions the HR on A. thaliana ecotypes Oy-0 abd Col- 0, but not Nd-0. We also demonstrate that resistance to the Psm strain from which avrRpm1 was isolated segregates as a single trait in the crosses Col-o x Nd-0 and Nd-0 x Oy-0. Furthermore, we map this locus (RPM1) molecularly in the Col-0 x Nd-0 cross to a relatively small interval defined by two RFLP markers on A. thliana chromosome 3. Resistance in the second cross also maps to this locus and co-segregates with resistance to avrRpm1.     

A new technique for monoconidial culture of the most aggressive isolate in a given population of Bipolaris sorokiniana, cause of foliar spot blotch in wheat and barley

We developed a new technique for monoconidial culture of the most aggressive isolate in a given population of Bipolaris sorokiniana, to facilitate the evaluation of spot blotch resistance in wheat and barley. Blotched portions of infected barley leaves were placed on a glass slide in a moist chamber for production of conidia by associated fungal hyphae. Conidia were collected separately and grown on water agar discs. Individual water agar discs having conidium growth were inoculated on barley leaves. The conidium producing the earliest symptom with the largest lesion was considered most aggressive. This lesion was incubated in a moist chamber and the conidial offspring were tested for pathogenicity. When a uniform infection was observed, a small piece of the lesion was cut using a sterilized scalpel, surface sterilized with NaOCl, and inoculated in the centre of Petri dishes containing potato dextrose agar medium. The inoculated Petri dishes were incubated at 25 ± 1 °C to yield monoconidial cultures of the most aggressive isolate. Variability in symptom expression caused by the most aggressive isolate of a given population was much less than variability in symptom expression caused by all isolates collectively. The techniques will be useful for plant pathologists and breeders in screening for spot blotch resistance in wheat and barley.     

Ve1‐mediated resistance against Verticillium does not involve a hypersensitive response in Arabidopsis

The recognition of pathogen effectors by plant immune receptors leads to the activation of immune responses that often include a hypersensitive response (HR): rapid and localized host cell death surrounding the site of attempted pathogen ingress. We have demonstrated previously that the recognition of the Verticillium dahliae effector protein Ave1 by the tomato immune receptor Ve1 triggers an HR in tomato and tobacco. Furthermore, we have demonstrated that tomato Ve1 provides Verticillium resistance in Arabidopsis upon Ave1 recognition. In this study, we investigated whether the co‐expression of Ve1 and Ave1 in Arabidopsis results in an HR, which could facilitate a forward genetics screen. Surprisingly, we found that the co‐expression of Ve1 and Ave1 does not induce an HR in Arabidopsis. These results suggest that an HR may occur as a consequence of Ve1/Ave1‐induced immune signalling in tomato and tobacco, but is not absolutely required for Verticillium resistance.