A novel process of cyclodextrin production by the use of specific adsorbents: Part I. Screening of specific adsorbents

Novel adsorbents that are composed of ligand, spacer and support were chemically synthesized and the two consecutive screenings of them made it possible to determine the adsorbents that were most recommendable for α- and β-cyclodextrin (CD) production. First, ligands of high adsorption selectivity for each CD were screened from among the candidates (carboxylic acids) that are tied in ionic bonds to two types of strongly basic anion exchange resins as support. Secondly, ligand derivatives (as ligand and spacer) were bound in covalent bonds onto chilosan beads as support and then, the most suitable spacer length for the CDs' adsorption selectivity and capacity were investigated. An optimal mol ratio of ligand to amino group of the beads was also examined. Stearic acid was the most effective ligand for α-CD, whereas cyclohexanepropanamide-n-caproic acid was the best for β-CD. Adsorption selectivity of adsorbents derived from carboxylic acids (stearic and/or palmitic) and chitosan beads was almost 100%, while their adsorption capacities were large enough to meet the demand for economic production and purification of CDs on an industrial scale.     

Dye removal from aqueous solution by adsorption on treated sawdust

Formaldehyde treated and sulphuric acid treated saw dusts were used to adsorb malachite green at varying dye concentration, adsorbent dose, pH and agitation time. Similar experiments were conducted with laboratory grade activated carbon to compare the results. The adsorption efficiency of sulphuric acid treated sawdust (SD) was higher than formaldehyde treated SD. The adsorption followed first order rate expression and Lagergren equation. An initial pH in the range of 6-9 was favorable for the dye removal by both the adsorbents. Dilute solutions were effectively decolorized by the adsorbents. It is proposed that in batch or stirred tank reactors, both adsorbents can be an attractive option for dye adsorption.     

Synergistic Removal of Pb(II), Cd(II) and Humic Acid by Fe3O4@Mesoporous Silica-Graphene Oxide Composites

The synergistic adsorption of heavy metal ions and humic acid can be very challenging. This is largely because of their competitive adsorption onto most adsorbent materials. Hierarchically structured composites containing polyethylenimine-modified magnetic mesoporous silica and graphene oxide (MMSP-GO) were here prepared to address this. Magnetic mesoporous silica microspheres were synthesized and functionalized with PEI molecules, providing many amine groups for chemical conjugation with the carboxyl groups on GO sheets and enhanced the affinity between the pollutants and the mesoporous silica. The features of the composites were characterized using TEM, SEM, TGA, DLS, and VSM measurements. Series adsorption results proved that this system was suitable for simultaneous and efficient removal of heavy metal ions and humic acid using MMSP-GO composites as adsorbents. The maximum adsorption capacities of MMSP-GO for Pb(II) and Cd (II) were 333 and 167 mg g⁻¹ caculated by Langmuir model, respectively. HA enhances adsorption of heavy metals by MMSP-GO composites due to their interactions in aqueous solutions. The underlying mechanism of synergistic adsorption of heavy metal ions and humic acid were discussed. MMSP-GO composites have shown promise for use as adsorbents in the simultaneous removal of heavy metals and humic acid in wastewater treatment processes.     

Adsorption of chromium from aqueous solution on treated sawdust

The adsorption of Cr(VI) from aqueous solutions on formaldehyde treated sawdust (SD) and sulphuric acid treated sawdust carbon (SDC) of Indian Rosewood, a timber industry waste, was studied at varying Cr(VI) concentrations, adsorbent dose, pH and agitation time. Similar experiments were conducted with commercially available coconut based activated carbon to compare the results. The Cr(VI) adsorption efficiency on SDC was higher than SD. The adsorption followed first order rate expression and Lagergren equation. An initial pH of 3.0 was most favorable for Cr(VI) removal by both the adsorbents. Maximum Cr(VI) was sequestered from the solution within 60 min after the beginning for every experiment. It is proposed that SDC and SD can be potential adsorbents for Cr(VI) removal from dilute solutions.     

亲和介质及溶液条件对蛋白质溶液中内毒素去除的影响

生物制品中内毒素的去除是一项十分重要的工作。为了更好地去除各种生物制品中的内毒素,采用合成的多粘菌素B琼脂糖亲和介质,通过静态吸附的方法去除蛋白质溶液中的内毒素。重点考察了介质的间臂长度、配基密度以及各种溶液条件(pH值、盐种类和浓度、蛋白质种类和浓度、内毒素浓度、添加剂等)对内毒素去除率及蛋白质回收率的影响。分别采用动态浊度法和Lowry法检测内毒素含量和蛋白质浓度。结果表明该介质具有载量高、去除速度快、去除率高、可重复使用的特点。此外,配基密度、pH值、盐浓度和蛋白质特性(等电点和疏水性)对内毒素去除效果均有重要影响。在优化的条件下,血红蛋白、人血清白蛋白和溶菌酶的回收率分别达到87.2%、73.4%和97.3%,相应的内毒素去除率分别达到99.8%、97.9%和99.7%。阐明了各种因素对内毒素去除率和蛋白质回收率的影响规律,为生物制品中内毒素的高效去除提供了参考。     

Role of transition metal ferrocyanides (II) in chemical evolution

Due to ease of formation of cyanide under prebiotic conditions, cyanide ion might have formed stable complexes with transition metal ions on the primitive earth. In the course of chemical evolution insoluble metal cyano complexes, which settled at the bottom of primeval sea could have formed peptide and metal amino acid complexes through adsorption processes of amino acids onto these metal cyano complexes.Adsorption of amino acids such as glycine, aspartic acid, and histidine on copper ferrocyanide and zinc ferrocyanide have been studied over a wide pH range of 3.6 – 8.5. Amino acids were adsorbed on the metal ferrocyanide complexes for different time periods. The progress of the adsorption was followed spectro-photometrically using ninhydrin reagent. Histidine was found to show maximum adsorption on both the adsorbents at neutral pH. Zinc ferrocyanide exhibits good sorption behaviour for all the three amino acids used in these investigations.     

Protein separation using membrane-encapsulated soluble ligand conjugates.

A new approach for isolating and recovering biological macromolecules using membrane-encapsulated soluble ligand conjugates was investigated. Membrane-encapsulated solid adsorbents have been successfully developed and employed in our laboratory to isolate and purify proteins and enzymes directly from culture broths. This new concept also makes it possible to use soluble ligand conjugates instead of solid adsorbents inside membrane capsules. In this work, model membrane-encapsulated soluble and insoluble ligands comprising Blue Dextran and Blue Sepharose entrapped within calcium alginate membranes were studied to compare adsorption characteristics such as capacities and rates. Experimental results suggest that membrane-encapsulated soluble ligands may be expected to result in higher overall adsorption capacity compared to membrane-encapsulated solid adsorbents with comparable adsorption rates.     

PEGylated click polypeptides synthesized by copper-free microwave-assisted thermal click polymerization for selective endotoxin removal from protein solutions

PEGylated click polypeptides (PEG-CPs) containing α-amino side groups as well as PEG segments are designed for selective endotoxin removal from protein solutions. The PEG-CPs are synthesized via copper-free thermal click copolymerization from aspartic (or glutamic) acid-based dialkyne and diazide monomers (containing free amino side groups) and alkyne-terminated mPEGs or dialkyne-terminated PEGs. Microwave-assisting technology is introduced into thermal click chemistry to improve the reaction efficiency. The monomers and polymers are fully characterized using NMR, XPS, and MALDI-TOF MS. After immobilizing the PEGylated click polypeptides onto polystyrene microspheres, the adsorbents exhibit good endotoxin removal selectivity from BSA solutions.     

The derivatization of oxidized polysaccharides for protein immobilization and affinity chromotography

The present report describes the preparation of modified polysaccharides matrices useful for the synthesis of affinity adsorbents and immobilized proteins. Hydrazido-matrices were synthesized by condensing an excess of the bifunctional reagent, adipic acid dihydrazide, with periodate oxidized cellulose paper, Sephadex, or Sepharose matrices. Ribonucleotide dialdehyde cofactors, glyceraldehyde 3-phosphate, pyridoxal 5′-phosphate and oxidized DNAase B were separately bound to the hydrazido-polymers. Azido-matrices obtained by modification of the hydrazido-derivatives were coupled to specific amino ligands such as amino acids and proteins. Several adsorbents were prepared and used as models for affinity chromatography.     

The derivatization of oxidized polysaccharides for protein immobilization and affinity chromatography.

The present report describes the preparation of modified polysaccharides matrices useful for the synthesis of affinity adsorbents and immobilized proteins. Hydrazido-matrices were synthesized by condensing an excess of the bifunctional reagent, adipic acid dihydrazide, with periodate oxidized cellulose paper, Sephadex, or Sepharose matrices. Ribonucleotide dialdehyde cofactors, glyceraldehyde 3-phosphate, pyridoxal 5'-phosphate and oxidized DNAase B were separately bound to the hydrazido-polymers. Azido-matrices obtained by modification of the hydrazido-derivatives were coupled to specific amino ligands such as amino acids and proteins. Several adsorbents were prepared and used as models for affinity chromatography.     

Development of specific adsorbents for human tumor necrosis factor-alpha: influence of antibody immobilization on performance and biocompatibility

To develop adsorbents for the specific removal of tumor necrosis factor-alpha (TNF) in extracorporeal blood purification, cellulose microparticles were functionalized either with a monoclonal anti-TNF antibody (mAb) or with recombinant human antibody fragments (Fab). The TNF binding capacity of the adsorbents was determined with in vitro batch experiments using spiked human plasma (spike: 1200 pg TNF/mL; 1 mg particles in 250 muL plasma). Random immobilization of the full-sized monoclonal antibody to periodate-activated cellulose yielded particles with excellent adsorption capacity (258.1 +/- 48.6 pg TNF per mg adsorbent wet weight). No leaching of antibody was detectable, and the adsorbents retained their activity for at least 12 months at 4 degrees C. We found that the conditions used during immobilization of the antibody (pH, nature of the reducing agent) profoundly influenced the biocompatibility of the resulting adsorbents, especially with respect to activation of the complement system. Particles obtained by random immobilization of the monovalent Fab fragments on periodate-activated cellulose using the same conditions as for immobilization of the mAb exhibited only low adsorption capacity (44 +/- 7 pg/mg adsorbent wet weight). Oriented coupling of the Fab fragments on chelate-epoxy cellulose via a C-terminal histidine tag, however, increased the adsorption capacity to 178.3 +/- 8.6 pg TNF/mg adsorbent wet weight. Thus, in the case of small, monovalent ligands, the orientation on the carrier is critical to retain full binding activity.     

Chromatographic removal of endotoxin from protein solutions by polymer particles

Endotoxins, constituents of cell walls of gram-negative bacteria, are potential contaminants of the protein solutions originating from biological products. Such contaminants have to be removed from solutions used for intravenous administration, because of their potent biological activities causing pyrogenic reactions. Separation methods used for decontamination of water, such as ultrafiltration, have little effect on endotoxin levels in protein solutions. To remove endotoxin from a solution of high-molecular-mass compounds, such as proteins, the adsorption method has proven to be most effective. In this review, we first introduce endotoxin-specific properties in an aqueous solution, and then provide various methods of chromatographic separation of endotoxins from cellular products using polymer adsorbents. We also provide the design of novel endotoxin-specific polymer adsorbents.     

Rapid method for the isolation of hydroxylysylpyridinoline and lysylpyridinoline from concentrated bone hydrolysates by liquid chromatographic techniques

A rapid method for the isolation of hydroxylysylpyridinoline and lysylridinoline from bone by liquid chromatographic methods is described. Decalcified bone is hydrolysed in 7 M hydrochloric acid. After evaporation of the acid, the high molecular mass dark coloured degradation products are removed by adsorption on non-polar adsorbents. The pyridinolines are separated from the majority of the amino acids by adsorption on cellulose. Separation of HP and LP is performed either by cation-exchange chromatography or by reversed-phase ion-pari chromatography. The pyridinoline containing fractions are desalted by size-exclusion chromatography. The progress of the hydrolytic cleavage of collagen and the optimal parameters for purification and separation were examined. As a result the existing method allows the isolation of high amounts of pyridinolines with low amounts of adsorbents and chemical within a short time.     

Dioxin-like polychlorinated biphenyl adsorbent obtained from enzymatic saccharification residue of lignocellulose

In this study, the effective utilization of lignocellulose residue as an adsorbent was investigated. Japanese cypress wood flour subjected to hydrothermal pretreatment and ball-mill grinding was saccharified with an enzyme. The residual wood flour was carbonized and activated by physical and chemical activation to produce adsorbents for persistent organic pollutant removal. The adsorption properties were investigated by pore analysis using the N₂ adsorption/desorption isotherm and adsorption tests for dioxin-like polychlorinated biphenyls in a hexane solution. The obtained adsorbents showed high production yields and adsorption properties for dioxin-like polychlorinated biphenyls.     

Adsorption mechanism at the molecular level between polymers and uremic octapeptide by the 2D 1H NMR Technique

To remove uremic octapeptide from the blood stream of uremic patients, various modified polyacylamide cross-linked absorbents were prepared. Adsorption experiments showed these absorbents have significant differences in adsorption capacity to the target peptide. In this paper, two-dimension proton nuclear magnetic resonance (2D 1H NMR) spectroscopy was used to investigate the interaction mechanism between the peptide and the adsorbents. Because of the insolubility of the absorbent, some soluble linear polymers with the same functional groups as the absorbents were employed as the model adsorbents in 2D 1H NMR. The preferred binding site for the peptide and polymers was identified to be at the C-terminal carboxyl group of the octapeptide via chemical shift perturbation effects. In this study, we found that hydrogen bonding, electrostatic, and hydrophobic interactions all play a role in the interaction force but had different contributions. Especially, the great chemical shift changes of the aromatic amino acid residues (Trp) during the interaction between butyl-modified polyacrylamide and octapeptide suggested the hydrophobic interaction, incorporated with the electrostatic force, played an important role in the binding reaction in aqueous solutions. This information not only rationally explained the results of the adsorption experiments, but also identified the effective binding site and mechanism, and shall provide a structural basis for designing better affinity-type adsorbents for the target peptide.     

Characteristics of PAHs adsorption on inorganic particles and activated sludge in domestic wastewater treatment

The occurrence of polycyclic aromatic hydrocarbons (PAHs) in a domestic wastewater treatment plant (WWTP) was investigated in a 1 year period. In order to understand how PAHs were removed at different stages of the treatment process, adsorption experiments were conducted using quartz sand, kaolinite, and natural clay as inorganic adsorbents and activated sludge as organic adsorbent for adsorbing naphthalene, phenanthrene, and pyrene. As a result, the adsorption of PAHs by the inorganic adsorbents well followed the Langmuir isotherm while that by the activated sludge well followed the Freundlich isotherm. By bridging equilibrium partitioning coefficient with the parameters of adsorption isotherm, a set of mathematical models were developed. Under an assumption that in the primary settler PAHs removal was by adsorption onto inorganic particles and in the biological treatment unit it was by adsorption onto activated sludge, the model calculation results fairly reflected the practical condition in the WWTP.     

Characterization of mesoporous activated carbons prepared by pyrolysis of sewage sludge with pyrolusite

Activated carbons were prepared from sewage sludge by chemical activation. Pyrolusite was added as a catalyst during activation and carbonization. The influence of the mineral addition on the properties of the activated carbons produced was evaluated. The results show that activated carbons from pyrolusite-supplemented sewage sludge had up to a 75% higher BET surface area and up to a 66% increase in mesoporosity over ordinary sludge-based activated carbons. Batch adsorption experiments applying the prepared adsorbents to synthetic dye wastewater treatment yielded adsorption data well fitted to the Langmuir isotherm. The adsorbents from pyrolusite-supplemented sludges performed better in dye removal than those without mineral addition, with the carbon from pyrolusite-augmented sludge T2 presenting a significant increase in maximum adsorption capacity of 50 mg/g. The properties of the adsorbents were improved during pyrolusite-catalyzed pyrolysis via enhancement of mesopore production, thus the mesopore channels may provide fast mass transfer for large molecules like dyes.     

Absence of induction of IL-1 production in human monocytes by complement fragments

The ability of C fragments to induce IL-1 production in human monocytes was examined by using various approaches to carefully exclude the role of contaminating endotoxin. The presence of IL-1 activity in monocyte supernatants and lysates was assayed by the augmentation of PHA-induced proliferation of murine thymocytes. SRBC were opsonized with IgM rabbit antibodies and various human C components to prepare EAC reagents that contained less than 25 pg LPS/ml of EAC at 5 x 10(8) cells/ml. EAC1q, EAC4b, EAC4b2aoxy, EAC4b2aoxy C3b, EAC4b2aoxyC3bi, and EAC4b2aoxyC3d all failed to induce IL-1 production when incubated at 10- to 100-fold excess with adherent human monocytes. Similarly, LPS-free purified C3a, C5a, and C5a des Arg all showed no IL-1-inducing activities at concentrations up to 25 micrograms/ml. However, the same C5a preparations were active on human monocytes in the induction of chemotaxis, and C3a and C5a both induced skin-blueing in guinea pigs. Fragment Ba and Bb preparations purified by gel filtration chromatography contained approximately 100 pg LPS/micrograms Ba or Bb. These Ba and Bb preparations at 10 and 50 micrograms/ml, respectively, induced IL-1 production in the presence of 5 micrograms/ml polymyxin B (PMB). However, Ba and Bb preparations purified by affinity chromatography and HPLC contained lower levels of endotoxin contamination and displayed IL-1-inducing activities at Ba and Bb concentrations of 50 and 100 micrograms/ml, respectively, that were almost completely inhibited by PMB. To explore further the role of contaminating endotoxin, a Bb preparation was adsorbed with PMB-4B in the presence of a dialyzable detergent to remove LPS bound to the Bb. This LPS-free Bb preparation failed to induce IL-1 production while maintaining intact enzymatic activities. These results indicate that various solid phase or soluble C fragments, including C3b, iC3b, C3d, C3a, C5a, Ba or Bb do not induce IL-1 production in human monocytes in the absence of contaminating endotoxin.     

Dye adsorption by sewage sludge-based activated carbons in batch and fixed-bed systems

The present research work deals with the production of activated carbons by chemical activation and pyrolysis of sewage sludges. The adsorbent properties of these sewage sludges based activated carbons were studied by liquid-phase adsorption tests. Dyes removal from colored wastewater being a possible application for sludge based adsorbents, methylene blue and saphranine removing from solution was studied. Pure and binary adsorption assays were performed in batch and fixed bed systems. In all cases studied, the adsorbents produced from sewage sludges were able to adsorb both the compounds considered here. Nevertheless, time required for reaching equilibrium, adsorptive capacity and fixed bed characteristic parameters were different for these two compounds. Methylene blue adsorption occurred faster than that of saphranine, and it was preferably adsorbed when treating binary solutions. It could be concluded that the sewage sludge-based activated carbons may be promising for dyes removal from aqueous streams.     

Studies on adsorption isotherms of endotoxin and BSA using an affinity column

In this paper, an adsorbent with dimethylamine ligand for endotoxin removal was prepared and used to study the adsorption isotherms of endotoxin and BSA. The results showed that as the introducing of endotoxin, the maximum adsorption capacity q_m of BSA increased from 7.24 to 7.74 mg/mL and the apparent association constant K_A of BSA decreased from 14.06 to 11.48 mL/mg. The adsorption isotherms of BSA changed from Langmuir model to Multilayer model. All these gave the direct evidences to construct the adsorption process. By comparing adsorption isotherms of endotoxin with BSA, it was found that the apparent association constant K_A of endotoxin was much higher than that of BSA.