Acyl and amino intermediates in reactions catalysed by pig pepsin. Analysis of transpeptidation products.

The action of pig pepsin on a variety of small peptides including Leu-Trp-Met-Arg, Leu-Trp-Met, Leu-Leu-NH2, benzyloxycarbonyl-Phe-Leu and Gly-Leu-Tyr was studied. Leu-Leu-Leu was found to be the major product from the substrates Leu-Trp-Met-Arg and Leu-Trp-Met, indicating that the predominant reaction at pH 3.4 was a transpeptidation of the acyl-transfer type. Leu-Leu-Leu was also formed in high yield by amino transfer from benzyloxycarbonyl-Phe-Leu. Like the amino-transfer reactions the acyl transfer proceeded via a covalent intermediate, since [14C]leucine was not incorporated into transpeptidation products and did not exchange with enzyme-bound leucine in the presence of acceptors. With Leu-Trp-Met both acyl and amino transpeptidation products, namely Leu-Leu, Leu-Leu-Leu, Met-Met and Met-Met-Met, were formed in addition to methionine and leucine. With Leu-Trp-Met-Arg (1 mM) the pH optimum for the rates of hydrolysis and acyl transfer is about pH 3.4. At this pH the rate of acyl transfer exceeds that of hydrolysis; at pH 2, however, hydrolysis was faster than transfer. A comparison of the effect of the length of substrates and products on the reaction rates allows the conclusion that the binding site can extend over eight to nine amino acid residues. Although the experiments provide no conclusive evidence for or against the involvement of amino and/or acyl intermediates in the hydrolysis of long peptides and proteins, the high yield of transpeptidation reactions of both types observed with some substrates suggests a major role for the intermediates in pepsin-catalysed reactions. The results also show that when pig pepsin is used for the digestion of proteins for sequence work, the likelihood of the formation of transpeptidation products is considerable. In this way peptides not present in the original sequence could easily form in a reasonably good yield.     

Reversible modification of arginine residues. Application to sequence studies by restriction of tryptic hydrolysis to lysine residues.

1, 2-Cyclohexanedione reacts specifically with the guanidino group of arginine or arginine residues at pH 8 to 9 in sodium borate buffer in the temperature range of 25-40 degrees. The single product, N-7, N-8-(1,2-dihydroxycyclohex-1,2-ylene)-L-arginine (DHCH-arginine) is stable in acidic solutions and in borate buffers (pH 8 to 9). DHCH-Arginine is converted to N-7-adipyl-L-arginine by periodate oxidation. The structures of the two compounds were elucidated by chemical and physicochemical means. Arginine or arginyl residues can be regenerated quantitatively from DHCH-arginine by incubation at 37 degrees in hydroxylamine buffer at pH 7.0 FOR 7 TO 8 hours. Analysis of native egg white lysozyme and native as well as oxidized bovine pancreatic RNase, which were treated with cyclohexanedione, showed that only arginine residues were modified. The utility of the method in sequence studies was shown on oxidized bovine pancreatic ribonuclease A. Arginine modification was complete in 2 hours at 35 degrees in borate buffer at pH 9.0 with a 15-fold molar excess of the reagent. The derived peptides showed that tryptic hydrolysis was entirely limited to peptide bonds involving lysine residues, as shown both by two-dimensional peptide patterns and by isolation of the resulting peptides. The stability of DHCH-arginyl residues permits isolation of labeled peptides.     

Physico-chemical characterization of proteins by capillary electrophoresis

The electrophoretic mobility of proteins was successfully determined by means of capillary electrophoresis (CE) with various background electrolytes (BGEs). The objective was focused on the variation in BGE physico-chemical composition and the consequential impact on the observed protein charge. Experimental and calculated mobilities, according to Henry's equation, versus ionic strength have been compared. For positively-charged lysozyme, a good agreement between observed and calculated mobilities was observed using triethanolamine chloride at pH 7.0 as the BGE. Mobility close to zero was shown using borate (pH 8.0) and phosphate (pH 7.0) at a low ionic strength of about 20 mmol l⁻¹, and as a consequence, specific adsorption of oxyanions was evidenced. Lysozyme retention in the case of reversed-phase high-performance liquid chromatography (RP-HPLC) was decreased by the presence of phosphate ions. CE and HPLC are complementary tools for characterizing the behaviour of lysozyme. On the other hand, the mobility of the negatively-charged α-lactalbumin remained constant as regards phosphate at pH 7.0 in the 20–200 mmol l⁻¹ range, contrary to the decrease that had been expected with the increasing ionic strength. β-Lactoglobulin exhibited increasingly lower mobilities than those expected of boric acid/borate at pH 7.0 and 8.0 (I=20 mmol l⁻¹).     

Selective and facile assay of human immunodeficiency virus protease activity by a novel fluorogenic reaction

A highly selective and facile assay of human immunodeficiency virus protease (HIV-PR) has been required for the screening of medicinal inhibitors and also for classifying the subtypes of HIV in the therapeutic treatment of acquired immune deficiency syndrome (AIDS). This article describes a novel assay method of HIV-PR based on the selective fluorogenic reaction of peptides. A peptide fragment generated from a substrate by the enzymatic digestion with HIV-PR could be selectively quantified by the spectrofluorometric detection after the fluorogenic reaction with catechol in the presence of sodium periodate and sodium borate (pH 7.0). This assay system uses an N-terminal acetyl peptide as the substrate and crude extracts from Escherichia coli expressing recombinant HIV-PR. The activity obtained by the proposed assay correlated with that obtained by a conventional HIV-PR assay based on fluorescence resonance energy transfer detection.     

Pre-column derivatization with fluorescamine and high-performance liquid chromatographic analysis of drugs : Application to tocainide

The quantitative determination of tocainide, a new antiarrhythmic agent, by high-performance liquid chromatography (HPLC) is reported. The drug and a chemically similar internal standard were extracted from blood plasma with acetonitrile under salting-out conditions obtained by saturation of the aqueous medium with sodium chloride—sodium carbonate. The organic extract, without evaporation, was treated with borate buffer (pH 8.2) and fluorescamine. The resulting derivatives were chromatographed on an ODS reversed-phase column using a methanol—phosphate buffer (pH 7.0) mixture as mobile phase and were detected fluorometrically by monitoring the emission at 485 nm, with excitation at 395 nm. The intra-assay coefficients of variation were 3.0 and 4.3% for ten replicate 0.25 and 1.00 μg/ml samples, respectively, and the inter-assay coefficient of variation was 3.6% for ten replicate 1.00 μg/ml samples. The procedure is simple, rapid, sensitive, and specific. Several other drugs and drug metabolites also were derivatized with fluorescamine and chromatographed successfully. Pre-column derivatization with fluorescamine followed by HPLC with fluorometric detection may have significant advantages in drug analysis.     

Preparation of Physiologically Intact Mitochondria from Euglena gracilis z

A fluorescent reagent, N-(9-acridinyl)maleimide (NAM), was used for the determination of thiols in biological samples by high performance liquid chromatography. NAM-labeled glutathione (GSH), homocysteine, coenzyme A (CoA) and cysteine (CySH) were separated on a reversed-phase partition (octadecylsililated silica gel) column with the elution conditions of 0.06 m borate buffer pH 8.8: methanol (13: 1) at a flow rate of 0.6 ml/min within 15 min. In the absence of CoA in the sample, the elution conditions of 0.1 m borate buffer pH 8.8: methanol (15: 1) at a flow rate of 0.8 ml/min was used for the separations. Calibration curves were held up to 2.5 pmol for GSH and 11 pmol for CySH. About 0.17 µl of rat blood and 0.03 mg of rat liver equivalent to 0.1 nmol of GSH were determined. The sensitivity was 100 times higher than that obtained with an automatic amino acid analyzer.     

O-oligosaccharidyl-1-amino-1-deoxyalditols as intermediates for fluorescent labelling of oligosaccharides

Reducing monosaccharides were efficiently converted to stable 1-amino-1-deoxyalditols (=glycamines; distinguished from glycosylamines by mass-spectrometry) during incubation at 20 degrees C in saturated aqueous NH(4)HCO(3) containing NaCNBH(3). Potentially useful by-products included a novel, fully-reduced dimer (the corresponding secondary glycamine) and several relatively long-lived, unreduced products. With increasing incubation time, monomers exceeded dimers. Reducing disaccharides and oligosaccharides underwent similar reactions at their reducing termini; the yield of dimers decreased with increasing oligosaccharide M(r). The O-oligosaccharidyl-1-amino-1-deoxyalditols (OADs) obtained by reductive amination of oligosaccharides reacted readily with lissamine rhodamine sulfonyl chloride to yield OAD-sulforhodamine conjugates linked by a stable sulfonamide bond. Conditions for this reaction were optimised (borate buffer, pH9.0-9.5). The highly fluorescent OAD-sulforhodamine products were purified on a C(18) cartridge. They were electrophoretically immobile at pH2.0 and 6.5, and migrated towards the anode in borate buffer, pH9.4. The OAD-sulforhodamines were amenable to TLC and were excellent substrates for enzymic transglycosylation and for glycosylhydrolase action.     

Separation and detection of vitellogenin in fish plasma by capillary zone electrophoresis

A method for coupling capillary zone electrophoresis (CZE) with rapid membrane chromatography purification (RMCP) was established for the analysis of vitellogenin (VTG) in male fish plasma induced with 17ss-estrodiol. CZE analyses of purified VTG were performed in a buffer containing 25 mM sodium borate (pH 8.4). A 50 microm i.d. fused-silica capillary was used for separation and the detection was carried out by UV-diode array at 214 nm. Inter- and intra-assay variabilities of the proposed method were less than 10.06 and 1.95%, respectively. The method has good linear relationship over the scope of 15-2250 microg/ml with a correlation coefficient of R2 = 0.9965 and a detection limit of 7.0 microg/ml. The established CZE method was also applied to directly separate and identify VTG from fish plasma. The results indicated this method could minimize interferences from plasma proteins, allowing the detection of at least 62.5 microg/ml of VTG proteins in total proteins. This is a rapid and easy method to determine the quantity and purity of VTG compared to Bradford method and SDS-PAGE.     

Capillary electrophoresis of phosphorylated amino acids with fluorescence detection

A rapid and sensitive capillary electrophoresis (CE) method coupled with fluorescence detection was developed for identification of protein phosphorylation by determination of phosphoamino acids. Naphthalene-2,3-dicarboxaldehyde (NDA), a fluorescence derivatization reagent, was used to label protein hydrolysate. The optimal derivatization reaction was performed with 3.5mM NDA, 40 mM NaCN and 20mM borate buffer (pH 10.0) for 15 min. The baseline separation of three phosphorylated amino acids could be obtained in less than 180 s with good repeatability by using 30 mM borate (pH 9.2) containing 2.0mM beta-cyclodextrin (beta-CD) as the running buffer. The detection limits for phosphothreonine, phosphotyrosine and phosphoserine were 7.0 x 10(-9)M, 5.6 x 10(-9)M and 7.2 x 10(-9)M, respectively (S/N=3). Also, the interference from other protein amino acids with large molar excess over that of phosphoamino acids was studied. With beta-casein as the analysis protein, this method was successfully validated.     

Quantitation of the glycation intermediate 3-deoxyglucosone by oxidation with rabbit liver oxoaldehyde dehydrogenase to 2-keto-3-deoxygluconic acid followed by high-performance liquid chromatography

A simple and sensitive method for the detection of 3-deoxyglucosone was developed using oxidation with crude oxoaldehyde dehydrogenase to 2-keto-3-deoxygluconic acid followed by high-performance liquid chromatography (HPLC). Oxoaldehyde dehydrogenase was prepared from rabbit liver and partially characterized. 2-Keto-3-deoxygluconic acid produced from 3-deoxyglucosone by oxoaldehyde dehydrogenase was derivatized with 1,2-diamino-4,5-methylenedioxybenzene, and the fluorescent products were detected and quantitated by HPLC using a solvent containing borate. In the presence of borate, 2-keto-3-deoxygluconic acid was completely separated from N-acetylneuraminic acid. The detection limit of 3-deoxyglucosone was 2.5 pmol/injection (10 μl) at a signal-to-noise ratio of 3. This method was used to confirm the inhibitory effect of aminoguanidine on glycation.     

Separation and sensitive determination of i-urobilin and 1-stercobilin by high-performance liquid chromatography with fluorimetric detection

i-Urobilin and 1-stercobilin were separated by high-performance liquid chromatography on a reversed-phase octadecylsilane-bonded column and detected fluorimetrically through formation of phosphor with zinc ions in the eluent. The separation and the intensity of the fluorescence response were affected by concentrations of zinc acetate and sodium borate buffer, pH and methanol content in the eluent. The optimal eluent used consisted of 0.1% zinc acetate in 75 mM boric acid buffer (pH 6.0)—methanol (25:75). The detection limit was 0.2 μg/l for both i-urobilin and 1-stercobilin (signal-to-noise ratio 2), which makes the method 250–2500 times more sensitive than conventional methods.     

Rapid determination of nitrite by reversed-phase high-performance liquid chromatography with fluorescence detection

Measurement of nitrite and nitrate, the stable oxidation products of nitric oxide (NO), provides a useful tool to study NO synthesis in vivo and in cell cultures. A simple and rapid fluorometric HPLC method was developed for determination of nitrite through its derivatization with 2,3-diaminonaphthalene (DAN). Nitrite, in standard solution, cell culture medium, or biological samples, readily reacted with DAN under acidic conditions to yield the highly fluorescent 2,3-naphthotriazole (NAT). For analysis of nitrate, it was converted to nitrite by nitrate reductase, followed by the derivatization of nitrite with DAN to form NAT. NAT was separated on a 5-μm reversed-phase C₈ column (150×4.6 mm, I.D.) guarded by a 40-μm reversed-phase C₁₈ column (50×4.6 mm, I.D.), and eluted with 15 mM sodium phosphate buffer (pH 7.5) containing 50% methanol (flow-rate, 1.3 ml/min). Fluorescence was monitored with excitation at 375 nm and emission at 415 nm. Mean retention time for NAT was 4.4 min. The fluorescence intensity of NAT was linear with nitrite or nitrate concentrations ranging from 12.5 to 2000 nM in water, cell culture media, plasma and urine. The detection limit for nitrite and nitrate was 10 pmol/ml. Because NAT is well separated from DAN and other fluorescent components present in biological samples, our HPLC method offers the advantages of high sensitivity and specificity as well as easy automation for quantifying picomole levels of nitrite and nitrate in cell culture medium and biological samples.     

Fluorometric assay for pancreatic cholesterylester hydrolase

A fluorescent cholesterylester analogue, cholesteryl 6-pyrenylhexanoate (ChPH), was used as a substrate for pancreatic cholesterylester hydrolase (CEH, EC 3.1.1.13). The substrate consisted of ChPH in egg phosphatidylcholine stabilized microemulsion with the aqueous phase containing deoxycholate below its critical micellar concentration. Due to the high local concentration of the pyrene moiety in the ChPH phase the fluorescence emission due to monomeric pyrene (IM) is greatly exceeded by the excimer fluorescence intensity (IE). Upon reacting with CEH 6-pyrenylhexanoic acid and free cholesterol are formed. The fluorescent product, 6-pyrenylhexanoic acid, is transferred into the aqueous phase containing deoxycholate, thus resulting in an enhanced fluorescence due to monomeric pyrene. CEH activity can thus be assessed directly by monitoring IM vs. time without product separation. Useful assay conditions were found to be 10 microM ChPH, 0.1 microM egg phosphatidylcholine, 2 mM sodium deoxycholate at 25 degrees C and pH 6.5-7.0.     

Acyl and amino intermediates in reactions catalyzed by thermolysin

Thermolysin showed peculiar transpeptidation reactions. Leu-Leu and/or Leu-Leu-Leu were produced at $\text{ca}$. pH 7 from Leu-Leu-NH₂ and Cbz-Leu-Leu. Isotope experiments indicated that the transpeptidation products did not use leucine released from the substrates as an acceptor. With Leu-Trp-Met, Leu-Leu, Leu-Leu-Leu and Met-Met were produced as transpeptidation products. A comparative study was done with α-chymotrypsin and pepsin. These results would indicate that thermolysin catalyzed reactions proceed via both acyl and amino intermediates depending upon the substrates, which has been proposed for the mechanism of pepsin. This may also be true in some cases for chymotrypsin and other proteases, which have been known as enzymes of the acyl-enzyme mechanism.     

Antifreeze glycoproteins from Antarctic fish. Inactivation by borate.

Antifreeze glycoprotein, which has previously been shown to be inactive in the presence of borate, migrates electrophoretically as the borate complex, presumably through formation of borate complexes with hydroxyl groups on the sugar side chains. Antifreeze glycoprotein (5 mg/ml) has been found to be completely active in the presence of 0.1 M borate at pH 7, but inactive at pH 9. A titration curve of pH versus the antifreeze activity of glycoprotein (5 mg/ml) in 0.1 M borate showed a progressive decrease in antifreeze activity as the pH was increased. Concomitant with decreases in activity were increases in binding of borate. At pH 9.0, nearly 2 mol of borate were complexed per glycotripeptide. Ultracentrifuge analyses showed similar molecular weights and laser quasi-elastic light scattering showed similar diffusions at pH 7.0 and 9.0 in borate and in the absence of borate. The binding of borate, rather than a change in conformation, is thus directly related to the loss of antifreeze activity. Alkaline borate also decreased hemagglutinating activity of Osage orange lectin and decreased the inhibition of the activity by the antifreeze glycoproteins.     

A reversed-phase ion-pair high-performance liquid chromatography method for bovine testicular hyaluronidase digests using postcolumn derivatization with 2-cyanoacetamide and ultraviolet detection

A reversed-phase ion-pair HPLC method for separating hyaluronic acid oligomers, using a polymeric C18 column at alkaline pH, is described. As the concentration of the ion-pairing agent tetrabutylammonium hydroxide increased, over the range of 0.01 to 0.06M, the capacity factors (k') of tetra- to dodecasaccharide decreased. The change in k', for each increment in pairing agent, increased with oligomer molecular weight. When changing mobile phase pH from 7 to 8, k' dramatically decreased and remained unchanged from pH 8 to 11. The isocratic separation was optimized to resolve tetrato dodecasaccharide at pH 9.0 in under 19 min. The postcolumn derivatizing agent 2-cyanoacetamide reacted with the reducing N-acetylglucosamine end groups of hyaluronic acid oligomers to yield reaction products that were monitored at 27 nm. In a series of control experiments using decasaccharide and N-acetylglucosamine, it was found that maximum product formation took place at pH 9 and was greatly influenced by borate buffer concentration. The optimum concentration for 2-cyanoacetamide was 0.33% and a temperature of 100 degrees C gave the best signal to noise ratio for the postcolumn reaction. The method is linear and reproducible, and has a lower limit of detection for tetrasaccharide of 20 ng (25 pmol). This system is suitable for studying the degradation kinetics of purified hyaluronic acid oligomers by bovine testicular hyaluronidase. Extension of the method to fluorescent and electrochemical detection and its applicability to other glycosaminoglycans is discussed.     

Isolation and characterization of growth hormone from a marine fish, bonito (Katsuwonus pelamis)

Growth hormone (GH) was extracted under alkaline conditions (pH 10) from pituitary glands (6.3 g) of bonito (Katsuwonus pelamis), and subsequently purified by gel filtration, ion exchange chromatography, and reversed-phase HPLC. The GH was monitored by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and by immunoblotting with yellowtail GH antiserum at each step of purification. GH activity was determined by an in vivo bioassay. The yield of this hormone was 4.8 mg/g wet tissue. Intraperitoneal injection of bonito GH at doses of 0.1 and 1 micrograms/g body wt at 7-day intervals resulted in a significant increase in body weight and length of juvenile rainbow trout. Bonito GH antiserum exhibited both species and hormone specificity in radioimmunoassay. However, the bonito GH antiserum as well as yellowtail GH antiserum exhibited hormone specificity but not species specificity in immunoblotting. A molecular weight of 21,000 and an isoelectric point of 7.0 for bonito GH were estimated by SDS-PAGE and gel electrofocusing, respectively. The complete amino acid sequence of 185 residues was determined by sequencing fragment peptides prepared by chemical and enzymatic cleavages. Sequence comparison of bonito GH with other GHs revealed that there is a significant deletion in the middle of the molecule.     

Analysis of synthetic derivatives of peptide hormones by capillary zone electrophoresis and micellar electrokinetic chromatography with ultraviolet-absorption and laser-induced fluorescence detection

Capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) were used for the analysis of new synthetic derivatives of hypophysis neurohormones--vasopressin and oxytocin, and pancreatic hormone--human insulin (HI) and its octapeptide fragment, derivatized by fluorescent probe, 4-chloro-7-nitrobenzo[1,2,5]oxadiazol (NBD). The suitable composition of background electrolytes (BGEs) was selected on the basis of calculated pH dependence of effective charge of analyzed peptides. Basic ionogenic peptides were analyzed by CZE in the acidic BGE composed of 100 mM H3PO4, 50 mM Tris, pH 2.25. The ionogenic peptides with fluorescent label, NBD, were analyzed in 0.5 M acetic acid, pH 2.5. The best MEKC separation of non-ionogenic peptides was achieved in alkaline BGE, 20 mM Tris, 5 mM H3PO4, with micellar pseudophase formed by 50 mM sodium dodecylsulfate (SDS), pH 8.8. Selected characteristics (noise, detectability of substance, sensitivity of detector) of the UV-absorption detectors (single wavelength detector, multiple-wavelength photodiode array detector (PDA), both of them operating at constant wavelength 206 nm) and laser-induced fluorescence (LIF) detector (excitation/emission wavelength 488/520 nm) were determined. The detectability of peptides in the single wavelength detector was 1.3-6.0 micromol dm(-3) and in the PDA detector 1.6-3.1 micromol dm(-3). The LIF detection was more sensitive, the applied concentration of NBD derivative of insulin fragment in CZE analysis with LIF detection was three orders lower than in CZE with UV-absorption detector, and the detectability of this peptide was improved to 15.8 nmol dm(-3).     

Purification and characterization of a cell wall peptidase from Lactococcus lactis subsp. cremoris IMN-C12.

A peptidase from the cell wall fraction of Lactococcus lactis subsp. cremoris IMN-C12 has been purified to homogeneity by hydrophobic interaction chromatography, two steps of anion-exchange chromatography, and gel filtration. The molecular mass of the purified enzyme was estimated to be 72 kDa by gel filtration and 23 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The enzyme has a pI of 4.0, and it has the following N-terminal sequence from the 2nd to the 17th amino acid residues: -Arg-Leu-Arg-Arg-Leu-?-Val-Pro-Gly-Glu-Ileu-Val-Glu-Glu-Leu-Leu. The peptidase is most active at pH 5.8 and at 33 degrees C with trileucine as the substrate. Reducing agents such as dithiothreitol, beta-mercaptoethanol, and cysteine strongly stimulated enzyme activity, while p-chloromercuribenzoate had an inhibitory effect. Also, metal chelators lowered the peptidase activity, which could not be restored with Ca2+ and Mg2+. The divalent cations Cu2+, Zn2+, Fe2+, and Hg2+ completely inhibited peptidase activity. The peptidase is capable of hydrolyzing tripeptides and some dipeptides, with a preference for peptides containing leucine and with the highest activity towards the tripeptides Leu-Leu-Leu, Leu-Trp-Leu, and Ala-Leu-Leu, which were hydrolyzed with Kms of 0.37, 0.18, and 0.61 mM, respectively.     

Simultaneous quantification of twelve bioactive components in San-huang-xie-xin-tang by HPLC

A simple and reliable high-performance liquid chromatographic method with ultraviolet detection (280 nm) has been developed for the simultaneous analysis of 12 bioactive components in San-huang-xie-xin-tang (SHXXT), a traditional Chinese medicine containing Rhei rhizome, Coptidis rhizome and Scutellariae radix. A relatively simple extraction procedure was employed and optimised, and separation of the components was obtained within 1 h using a reversed-phase column under gradient elution with acetonitrile and a buffer containing 0.01 M sodium 1-pentanesulphonate (pH 3). The lower limit of detection for the analytes ranged from 25 to 75 ng/mL. The correlation coefficients associated with each calibration curve were greater than 0.99. The precision and accuracy of the method ranged from 1.0 to 10.5% at low concentration levels, 0.8 to 8.7% at medium levels and 1.2 to 5.8% at high levels. In commercial products of SHXXT, baicalin and berberine were present in the highest amounts with levels up to 4.0 and 3.3%, respectively, in one sample. The HPLC method was able rapidly and efficiently to analyse constituents in crude herb and traditional Chinese medicinal preparations containing Rhei rhizome, Coptidis rhizome and Scutellariae radix.