In Situ NMR Verification for Stacking Pressure-Induced Lithium Deposition and Dead Lithium in Anode-Free Lithium Metal Batteries

Anode-free lithium metal batteries have emerged as strong contenders for next-generation rechargeable batteries due to their ultra-high energy density. However, their safety and life span are insufficient because of the easy generation of dendrites and dead lithium during lithium plating and stripping. Understanding the formation mechanism for lithium dendrites and dead lithium is essential to further improve battery performance. By employing in situ solid-state nuclear magnetic resonance (NMR) spectroscopy, the influence of stacking pressure on dendritic behavior and dead lithium is systematically investigated. At 0.1 MPa, lithium dendrite is rapidly formed, followed by a linear increase of dead lithium. High stacking pressure not only causes lithium metal to fracture but also leads to form dendrites and dead lithium at the fracture site. At 0.5 MPa stacking pressure, the least quantity of dead lithium is attained, and the growth pattern of dead lithium is exponential growth. The exponential growth pattern is distinguished by the high growth of dead lithium early in the battery cycle and essentially no growth later in the cycle. As a result, it is believed that efficient suppression of dead lithium generation early in battery cycling can play a critical role in improving battery performance.     

Lithium Down-regulates Histone Deacetylase 1 (HDAC1) and Induces Degradation of Mutant Huntingtin

Lithium is an effective mood stabilizer that has been clinically used to treat bipolar disorder for several decades. Recent studies have suggested that lithium possesses robust neuroprotective and anti-tumor properties. Thus far, a large number of lithium targets have been discovered. Here, we report for the first time that HDAC1 is a target of lithium. Lithium significantly down-regulated HDAC1 at the translational level by targeting HDAC1 mRNA. We also showed that depletion of HDAC1 is essential for the neuroprotective effects of lithium and for the lithium-mediated degradation of mutant huntingtin through the autophagic pathway. Our studies explain the multiple functions of lithium and reveal a novel mechanism for the function of lithium in neurodegeneration.     

The Role of Interlayer Chemistry in Li‐Metal Growth through a Garnet‐Type Solid Electrolyte

Securing the chemical and physical stabilities of electrode/solid‐electrolyte interfaces is crucial for the use of solid electrolytes in all‐solid‐state batteries. Directly probing these interfaces during electrochemical reactions would significantly enrich the mechanistic understanding and inspire potential solutions for their regulation. Herein, the electrochemistry of the lithium/Li₇La₃Zr₂O₁₂‐electrolyte interface is elucidated by probing lithium deposition through the electrolyte in an anode‐free solid‐state battery in real time. Lithium plating is strongly affected by the geometry of the garnet‐type Li₇La₃Zr₂O₁₂ (LLZO) surface, where nonuniform/filamentary growth is triggered particularly at morphological defects. More importantly, lithium‐growth behavior significantly changes when the LLZO surface is modified with an artificial interlayer to produce regulated lithium depositions. It is shown that lithium‐growth kinetics critically depend on the nature of the interlayer species, leading to distinct lithium‐deposition morphologies. Subsequently, the dynamic role of the interlayer in battery operation is discussed as a buffer and seed layer for lithium redistribution and precipitation, respectively, in tailoring lithium deposition. These findings broaden the understanding of the electrochemical lithium‐plating process at the solid‐electrolyte/lithium interface, highlight the importance of exploring various interlayers as a new avenue for regulating the lithium‐metal anode, and also offer insight into the nature of lithium growth in anode‐free solid‐state batteries.     

A Lithium–Sulfur Cell Based on Reversible Lithium Deposition from a Li2S Cathode Host onto a Hostless‐Anode Substrate

The development of lithium–sulfur batteries necessitates a thorough understanding of the lithium‐deposition process. A novel full‐cell configuration comprising an Li₂S cathode and a bare copper foil on the anode side is presented here. The absence of excess lithium allows for the realization of a truly lithium‐limited Li–S battery, which operates by reversible plating and stripping of lithium on the hostless‐anode substrate (copper foil). Its performance is closely tied to the efficiency of lithium deposition, generating valuable insights on the role and dynamic behavior of lithium anode. The Li₂S full cell shows reasonable capacity retention with a Coulombic efficiency of 96% over 100 cycles, which is a tremendous improvement over that of a similar lithium‐plating‐based full cell with LiFePO₄ cathodes. The exceptional robustness of the Li₂S system is attributed to an intrinsic stabilization of the lithium‐deposition process, which is mediated by polysulfide intermediates that form protective Li₂S and Li₂S₂ regions on the deposited lithium. Combined with the large improvements in energy density and safety by the elimination of a metallic lithium anode, the stability and electrochemical performance of the lithium‐plating‐based Li₂S full cell establish it as an important trajectory for Li–S battery research, focusing on practical realization of reversible lithium anodes.     

Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries

Safety issues caused by the metallic lithium inside a battery represent one of the main reasons for the lack of commercial availability of rechargeable lithium‐metal batteries. The advantage of anodes based on coated lithium powder (CLiP), compared to plain lithium foil, include the suppression of dendrite formation, as the local current density during stripping/plating is reduced due to the higher surface area. Another performance and safety advantage of lithium powder is the precisely controlled mass loading of the lithium anode during electrode preparation, giving the opportunity to avoid Li excess in the cell. As an additional benefit, the coating makes electrode manufacturing safer and eases handling. Here, electrodes based on coated lithium powder electrodes (CLiP) are introduced for application in lithium‐metal batteries. These electrodes are compared to lithium foil electrodes with respect to cycling stability, coulombic efficiency of lithium stripping/plating, overpotential, and morphology changes during cycling.     

Free energy changes in ribonuclease A denaturation. Effect of urea, guanidine hydrochloride, and lithium salts

The unfolding of ribonuclease A by urea, guanidine hydrochloride, lithium perchlorate, lithium chloride, and lithium bromide has been followed by circular dichroic and difference spectral measurements. All three abnormal tyrosyl residues are normalized in urea and guanidine hydrochloride (delta epsilon 287 = -2700), only two are normalized in lithium bromide and lithium perchlorate (delta epsilon 287 = -1700), and only one is exposed in lithium chloride solutions (delta epsilon 287 = -700). The Gibbs energies are 4.7 +/- 0.1 kcal mol-1 for urea- and guanidine hydrochloride-denaturation, 3.8 +/- 0.2 kcal mol-1 for lithium perchlorate-denaturation, and 12.7 +/- 0.2 kcal mol-1 for lithium chloride- and lithium bromide-denaturation of ribonuclease A. The latter results suggest that the mechanism of the unfolding process in urea and guanidine hydrochloride is quite different from that in lithium salts.     

Lithium leads to an increased FRQ protein stability and to a partial loss of temperature compensation in the Neurospora circadian clock

In many organisms, the presence of lithium leads to an increase of the circadian period length. In Neurospora crassa, it was earlier found that lithium results in a decrease of overall growth and increased circadian periods. In this article, the authors show that lithium leads to a reduction of FRQ degradation with elevated FRQ levels and to a partial loss of temperature compensation. At a concentration of 13 mM lithium, FRQ degradation is reduced by about 60% while, surprisingly, the activity of the 20S proteasome remains unaffected. Experiments and model calculations have shown that the stability of FRQ is dependent on its phosphorylation state and that increased FRQ protein stabilities lead to increased circadian periods, consistent with the observed increase of the period when lithium is present. Because in Neurospora the proteasome activity is unaffected by lithium concentrations that lead to significant FRQ stabilization, it appears that lithium acts as an inhibitor of kinases that affect phosphorylation of FRQ and other proteins. A competition between Li(+) and Mg(2+) ions for Mg(2+)-binding sites may be a mechanism to how certain kinases are inhibited by Li(+). A possible kinase in this respect is GSK-3, which in other organisms is known to be inhibited by lithium. The partial loss of temperature compensation in the presence of lithium can be understood as an increase in the overall activation energy of FRQ degradation. This increase in activation energy may be related to a reduction in FRQ phosphorylation so that more kinase activity, that is, higher temperature and longer times, is required to achieve the necessary amount of FRQ phosphorylation leading to turnover. Using a modified Goodwin oscillator as a semiquantitative model for the Neurospora clock, the effects of lithium can be described by adding lithium inhibitory terms of FRQ degradation to the model.     

Cellular lithium and transepithelial transport across toad urinary bladder

Summary Toad urinary bladders were exposed on either their mucosal or serosal surfaces, or on both surfaces, to medium in which sodium was replaced completely by lithium. With mucosal lithium Ringer's, serosal sodium Ringer's, short-circuit current (SCC) declined by about 50 percent over the first 60 min and was then maintained over a further 180 min. Cellular lithium content was comparable to the sodium transport pool. With lithium Ringer's serosa, SCC was abolished over 60 to 120 min whether the mucosal cation was sodium or lithium. Measurements of cellular ionic composition revealed that the epithelial cells gained lithium from both the mucosal and serosal media. With lithium Ringer's mucosa and serosa, cells lost potassium and gained lithium and a little chloride and water, but these changes in cellular ions could not account for the current flow across the tissue under these conditions, which must, therefore, have been carried by a transepithelial movement of lithium itself. The inhibition by serosal lithium of SCC was overcome by exposure of the mucosal surface of the bladders to amphotericin B. Thus it reflected, predominantly, an inhibition of lithium entry to the cells across the apical membrane. It is suggested that this inhibition is a consequence of cellular lithium accumulation.     

Diffusion Limitation of Lithium Metal and Li–Mg Alloy Anodes on LLZO Type Solid Electrolytes as a Function of Temperature and Pressure

The morphological instability of the lithium metal anode is the key factor restricting the rate capability of lithium metal solid state batteries. During lithium stripping, pore formation takes place at the interface due to the slow diffusion kinetics of vacancies in the lithium metal. The resulting current focusing increases the internal cell resistance and promotes fast lithium penetration. In this work, galvanostatic electrochemical impedance spectroscopy is used to investigate operando the morphological changes at the interface by analysis of the interface capacitances. Therewith, the effect of temperature, stack pressure, and chemical modification is investigated. The work demonstrates that introducing 10 at% Mg into the lithium metal anode can effectively prevent contact loss. Nevertheless, a fundamental kinetic limitation is also observed for the Li‐rich alloy, namely the diffusion controlled decrease of the lithium metal concentration at the interface. An analytical diffusion model is used to describe the temperature‐dependent delithiation kinetics of Li–Mg alloys. Overall, it is shown that different electrode design concepts should be considered. Mg alloying can increase lithium utilization, when no external pressure is applied while pure lithium metal is superior for setups that allow stack pressures in the MPa range.     

Relationship Between Serum Lithium, Salivary Lithium, and Urinary Lithium in Patients on Lithium Therapy

Lithium carbonate is used in the treatment of both psychiatric and nonpsychiatric disorders. The aim of this study was to explore the relationship between serum lithium, salivary lithium, and urinary lithium. Blood, saliva, and urine samples were collected from 50 patients, and estimation of serum, salivary, and urine lithium was done using an atomic absorption spectrophotometer. Mean serum lithium was 0.75 ± 0.25 mEq/L, mean salivary lithium was 1.91 ± 0.80 mEq/L, and mean urine lithium was 7.16 ± 4.84 mEq/L. A significant direct correlation was found between serum lithium and salivary lithium (r = 0.695, p < 0.001). This correlation was higher in females (r = 0.770, p < 0.001) when compared to males (r = 0.665, p < 0.001). Even though a significant correlation was found between serum and salivary lithium levels, more studies are needed in this domain to establish salivary therapeutic monitoring as a feasible option for patients on lithium carbonate therapy.     

Global Lithium Availability

There is disagreement on whether the supply of lithium is adequate to support a future global fleet of electric vehicles. We report a comprehensive analysis of the global lithium resources and compare it to an assessment of global lithium demand from 2010 to 2100 that assumes rapid and widespread adoption of electric vehicles. Recent estimates of global lithium resources have reached very different conclusions. We compiled data on 103 deposits containing lithium, with an emphasis on the 32 deposits that have a lithium resource of more than 100,000 tonnes each. For each deposit, data were compiled on its location, geologic type, dimensions, and content of lithium as well as current status of production where appropriate. Lithium demand was estimated under the assumption of two different growth scenarios for electric vehicles and other current battery and nonbattery applications. The global lithium resource is estimated to be about 39 Mt (million tonnes), whereas the highest demand scenario does not exceed 20 Mt for the period 2010 to 2100. We conclude that even with a rapid and widespread adoption of electric vehicles powered by lithium‐ion batteries, lithium resources are sufficient to support demand until at least the end of this century.     

Fatal self-poisoning with lithium carbonate.

In a fatal case of self-poisoning with lithium carbonate there was a progressive increase in serum lithium concentration for 48 hours after ingestion of the overdose. It is suggested that the continuous increase in serum lithium concentration reflects prolonged absorption of lithium from relatively insoluble aggregates of lithium carbonate in the gastrointestinal tract. In this case there was an interval of 45 hours between ingestion of the overdose and the onset of central nervous system depression. Simultaneous peritoneal dialysis and hemodialysis were effective in rapidly reducing the serum lithium concentration but there was little concomitant change in the patient''s level of consciousness. The terminal event was a respiratory complication of the comatose state.     

PTEN Overexpression Cooperates With Lithium to Reduce the Malignancy and to Increase Cell Death by Apoptosis via PI3K/Akt Suppression in Colorectal Cancer Cells

Lithium is a well‐established non‐competitive inhibitor of glycogen synthase kinase‐3β (GSK‐3β), a kinase that is involved in several cellular processes related to cancer progression. GSK‐3β is regulated upstream by PI3K/Akt, which is negatively modulated by PTEN. The role that lithium plays in cancer is controversial because lithium can activate or inhibit survival signaling pathways depending on the cell type. In this study, we analyzed the mechanisms by which lithium can modulate events related to colorectal cancer (CRC) progression and evaluated the role that survival signaling pathways such as PI3K/Akt and PTEN play in this context. We show that the administration of lithium decreased the proliferative potential of CRC cells in a GSK‐3β‐independent manner but induced the accumulation of cells in G2/M phase. Furthermore, high doses of lithium increased apoptosis, which was accompanied by decreased proteins levels of Akt and PTEN. Then, cells that were induced to overexpress PTEN were treated with lithium; we observed that low doses of lithium strongly increased apoptosis. Additionally, PTEN overexpression reduced proliferation, but this effect was minor compared with that in cells treated with lithium alone. Furthermore, we demonstrated that PTEN overexpression and lithium treatment separately reduced cell migration, colony formation, and invasion, and these effects were enhanced when lithium treatment and PTEN overexpression were combined. In conclusion, our findings indicate that PTEN overexpression and lithium treatment cooperate to reduce the malignancy of CRC cells and highlight lithium and PTEN as potential candidates for studies to identify new therapeutic approaches for CRC treatment. J. Cell. Biochem. 117: 458–469, 2016. © 2015 Wiley Periodicals, Inc.     

Lithium suppresses signaling and induces rapid sequestration of beta2-adrenergic receptors

Lithium is a monovalent cation used therapeutically to treat a range of affective disorders (1), although the cellular mechanisms of lithium regulation that might contribute to its therapeutic effects at the level of neurotransmitter receptors are not known. Herein we report the ability of lithium to stimulate the internalization of beta2-adrenergic receptors. Lithium treatment of A431 human epidermoid carcinoma cells resulted in a rapid, prominent desensitization and internalization of beta2-adrenergic receptors. The ability of these receptors to generate a cyclic AMP response was strongly inhibited by lithium, at concentrations therapeutic in humans. Receptors for the serotonin (5HT1c) and for opiates (mu-opioid), in sharp contrast, resisted the effects of lithium on internalization. These data provide the first receptor-based mechanism to be described for lithium that could explain, in part, the therapeutic effects of lithium on affective disorders.     

Nonpolar Alkanes Modify Lithium‐Ion Solvation for Improved Lithium Deposition and Stripping

Lithium metal batteries have been plagued by the high reactivity of lithium. Reactive additives that can passivate the lithium metal surface and limit electrolyte accessibility to a fresh lithium surface have been widely explored, but can have limited utility with continuous consumption of the additive. In this work, an alternative strategy is explored. The use of nonreactive cosolvents such as nonpolar alkanes is studied and its is shown that hexane and cyclohexane addition to ether solvents (1,3‐dioxolane and 1,2‐dimethoxyethane) halves the nucleation and growth overpotentials for lithium deposition, increases the cell coulombic efficiency, improves the lithium deposition morphology, increases the electrolyte oxidative stability (>0.2 V), and doubles the cycle life—even when compared to a widely used fluorinated ether. The nonpolar alkanes modify the lithium‐ion solvation environment and reduce the solvation free energy; hence reducing the reaction barrier for lithium deposition. Exploration of nonpolar alkanes as part of the electrolyte mixture is a promising strategy for controlling metal deposition.     

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode

Artificial solid‐electrolyte interphase (SEI) is one of the key approaches in addressing the low reversibility and dendritic growth problems of lithium metal anode, yet its current effect is still insufficient due to insufficient stability. Here, a new principle of “simultaneous high ionic conductivity and homogeneity” is proposed for stabilizing SEI and lithium metal anodes. Fabricated by a facile, environmentally friendly, and low‐cost lithium solid‐sulfur vapor reaction at elevated temperature, a designed lithium sulfide protective layer successfully maintains its protection function during cycling, which is confirmed by both simulations and experiments. Stable dendrite‐free cycling of lithium metal anode is realized even at a high areal capacity of 5 mAh cm^?2, and prototype Li–Li₄Ti₅O₁₂ cell with limited lithium also achieves 900 stable cycles. These findings give new insight into the ideal SEI composition and structure and provide new design strategies for stable lithium metal batteries.     

A Material Perspective of Rechargeable Metallic Lithium Anodes

Rechargeable lithium‐based batteries are long considered as the most promising candidates for application in various electronic devices, electric vehicles, and even electrical grids owing to their ultrahigh energy densities. However, to date, metallic lithium‐based batteries are still far from practical applications due to the low Coulombic efficiency and fast capacity decay of lithium anodes. The poor electrochemical performances of metallic lithium anodes are inherently related to random growth of lithium dendrites and infinite volume charge of lithium anodes. In this review, the failure mechanisms of metallic lithium anodes are summarized and ascribed to the unstable and inhomogeneous solid electrolyte interphase, uneven distributions of electric field, and lithium‐ion flux during the lithium plating processes. Correspondingly, efficient strategies for mitigating these problems, including surficial engineering, electric field, and lithium‐ion flux regulation are discussed from the perspective of anode materials. Finally, an outlook is proposed for the design and fabrication of next‐generation rechargeable metallic lithium anodes that aims to address the intrinsic problems of metallic lithium anodes.     

Simultaneously Enhancing the Thermal Stability,Mechanical Modulus,and Electrochemical Performance of Solid Polymer Electrolytes by Incorporating 2D Sheets

Solid state electrolytes are the key components for high energy density lithium ion batteries and especially for lithium metal batteries where lithium dendrite growth is an inevitable obstacle in liquid electrolytes. Solid polymer electrolytes based on a complex of polymers and lithium salts are intrinsically advantageous over inorganic electrolytes in terms of processability and film‐forming properties. But other properties such as ionic conductivity, thermal stability, mechanical modulus, and electrochemical stability need to be improved. Herein, for the first time, 2D additives using few‐layer vermiculite clay sheets as an example to comprehensively upgrade poly(ethylene oxide)‐based solid polymer electrolyte are introduced. With clay sheet additives, the polymer electrolyte exhibits improved thermal stability, mechanical modulus, ionic conductivity, and electrochemical stability along with reduced flammability and interface resistance. The composite polymer electrolyte can suppress the formation and growth of lithium dendrites in lithium metal batteries. It is anticipated that the clay sheets upgraded solid polymer electrolyte can be integrated to construct high performance solid state lithium ion and lithium metal batteries with higher energy and safety.