Two-dimensional crystallization of streptavidin by nonspecific binding to a surface film: study with a scanning electron microscope.

A two-dimensional (2D) crystal of streptavidin has been obtained by a nonspecific binding method. The protein molecules were bound and formed a dense packing on the film of poly(1-benzyl-L-histidine) spread at the surface of protein solution. The surface film was moderately heated to stimulate crystallization of bound streptavidin. A potential of this method for obtaining 2D crystals of soluble proteins is demonstrated. The present 2D crystal structure of streptavidin resembles that previously obtained by specific binding to biotinylated lipid. We show in addition that the 2D array of protein with usual size approximately 50 A can be imaged using a high resolution scanning electron microscope (HR-SEM) and subject to structural analysis at low resolution. Various limitations in HR-SEM degrade considerably the image quality. However, the usability of a bulk plate as specimen support would make HR-SEM a convenient tool, when such a substrate must be considered in application of protein arrays, and if an intrinsic low resolution is acceptable.     

Helical crystallization on lipid nanotubes: streptavidin as a model protein

In this study, we use streptavidin (SA) as a model system to study helical protein array formation on lipid nanotubes, an alternative to 2D studies on lipid monolayers. We demonstrate that wild-type and a mutant form of SA form helical arrays on biotinylated lipid nanotubes. 3D maps from helical arrays of wild-type and mutant SA were reconstructed using two different approaches: Fourier-Bessel methods and an iterative single particle algorithm. The maps show that wild-type and mutant streptavidin molecules order differently. The molecular packing arrangements of SA on the surface of the lipid nanotubes differ from previously reported lattice packing of SA on biotinylated monolayers. Helical crystallization on lipid nanotubes presents an alternative platform to explore fundamentals of protein ordering, intermolecular protein interaction and phase behavior. We demonstrate that lipid nanotubes offer a robust and reproducible substrate for forming helical protein arrays which present a means for studying protein structure and structure-function relationships.     

Simulations of a protein crystal: explicit treatment of crystallization conditions links theory and experiment in the streptavidin-biotin complex

A 250 ns molecular dynamics simulation of the biotin-liganded streptavidin crystal lattice, including cryoprotectant molecules and crystallization salts, is compared to a 250 ns simulation of the lattice solvated with pure water. The simulation using detailed crystallization conditions preserves the initial X-ray structure better than the simulation using pure water, even though the protein molecules display comparable mobility in either simulation. Atomic fluctuations computed from the simulation with crystallization conditions closely reproduce fluctuations derived from experimental temperature factors (correlation coefficient of 0.88, omitting two N-terminal residues with very high experimental B-factors). In contrast, fluctuations calculated from the simulation with pure water were less accurate, particularly for two of the streptavidin loops exposed to solvent in the crystal lattice. Finally, we obtain good agreement between the water and cryoprotectant densities obtained from the simulated crystallization conditions and the electron density due to solvent molecules in the X-ray structure. Our results suggest that detailed lattice simulations with realistic crystallization conditions can be used to assess potential function parameters, validate simulation protocols, and obtain valuable insights that solution-phase simulations do not easily provide. We anticipate that this will prove to be a powerful strategy for molecular dynamics simulations of biomolecules.     

Dimer-tetramer transition between solution and crystalline states of streptavidin and avidin mutants

The biotin-binding tetrameric proteins, streptavidin from Streptomyces avidinii and chicken egg white avidin, are excellent models for the study of subunit-subunit interactions of a multimeric protein. Efforts are thus being made to prepare mutated forms of streptavidin and avidin, which would form monomers or dimers, in order to examine their effect on quaternary structure and assembly. In the present communication, we compared the crystal structures of binding site W-->K mutations in streptavidin and avidin. In solution, both mutant proteins are known to form dimers, but upon crystallization, both formed tetramers with the same parameters as the native proteins. All of the intersubunit bonds were conserved, except for the hydrophobic interaction between biotin and the tryptophan that was replaced by lysine. In the crystal structure, the binding site of the mutated apo-avidin contains 3 molecules of structured water instead of the 5 contained in the native protein. The lysine side chain extends in a direction opposite that of the native tryptophan, the void being partially filled by an adjacent lysine residue. Nevertheless, the binding-site conformation observed for the mutant tetramer is an artificial consequence of crystal packing that would not be maintained in the solution-phase dimer. It appears that the dimer-tetramer transition may be concentration dependent, and the interaction among subunits obeys the law of mass action.     

Electron crystallography of macromolecular periodic arrays on phospholipid monolayers

Electron crystallography has the potential of yielding structural information equivalent to x-ray diffraction. The major difficulty has been preparing specimens with the required structural order and size for diffraction and imaging in the electron microscope. 2D crystallization on phospholipid monolayers is capable of fulfilling both of these requirements. Crystals can form as a result of specific interactions with a protein's ligand or an analog, suitably linked to a lipid tail; or on a surface of complementary head-group charge. With such choices, the availability of a suitable lipid is limited only by synthetic chemistry. Ultimately, it is the quality and regularity of the protein-protein interactions that determine the crystalline order, as it is with any protein crystal. In the case of streptavidin, the monolayer crystal diffracts beyond 2.5 Å. A 3 Å projection map reconstructed from electron diffraction amplitudes and phases from images shows density which can be interpreted as β-sheets and clusters of side chains. It remains to be shown that the monolayer crystals are flat and diffract as well at high tilt angle as untilted. Technological issues such as charging must be resolved. With parallel advances in data collection and processing, electron crystallography of monolayer macromolecular crystals will eventually take its place beside x-ray crystallography and NMR as a routine and efficient structural technique.     

Streptavidin tetramerization and 2D crystallization: a mean-field approach

A mean-field theoretical approach is applied to streptavidin tetramerization and two-dimensional (2D) crystallization. This theory includes, in particular, solvent-residue interactions following the inhomogeneous Flory-Huggins model for polymers. It also takes into account residue-residue interactions by using tabulated pair interaction parameters. This theory allows one to explicitly calculate the entropy of the inhomogeneous system. We show that hydrophobic interactions are responsible for the stability of tetramerization. Within the present theory, the equilibrium distance between the two dimers is the same as that determined experimentally. The free energy of tetramerization (i.e., dissociation of the two dimers) is 50 k(B)T. Unlike tetramerization, hydrophobic interactions alone are not sufficient to stabilize the 2D crystal C(222), but solvent-mediated residue-residue interactions give the most important contribution.     

Streptavidin crystals as nanostructured supports and image-calibration references for cryo-EM data collection

For cryo-EM structural studies, we seek to image membrane proteins as single particles embedded in proteoliposomes. One technical difficulty has been the low density of liposomes that can be trapped in the approximately 100nm ice layer that spans holes in the perforated carbon support film of EM grids. Inspired by the use of two-dimensional (2D) streptavidin crystals as an affinity surface for biotinylated DNA (Crucifix et al., 2004), we propose to use the crystals to tether liposomes doped with biotinylated lipids. The 2D crystal image also serves as a calibration of the image formation process, providing an absolute conversion from electrostatic potentials in the specimen to the EM image intensity, and serving as a quality control of acquired cryo-EM images. We were able to grow streptavidin crystals covering more than 90% of the holes in an EM grid, and which remained stable even under negative stain. The liposome density in the resulting cryo-EM sample was uniform and high due to the high-affinity binding of biotin to streptavidin. Using computational methods, the 2D crystal background can be removed from images without noticeable effect on image properties.     

Structure-based design and synthesis of a bivalent iminobiotin analog showing strong affinity toward a low immunogenic streptavidin mutant

The streptavidin/biotin interaction has been widely used as a useful tool in research fields. For application to a pre-targeting system, we previously developed a streptavidin mutant that binds to an iminobiotin analog while abolishing affinity for natural biocytin. Here, we design a bivalent iminobiotin analog that shows 1000-fold higher affinity than before, and determine its crystal structure complexed with the mutant protein.     

低温电子显微技术在膜蛋白结构研究中的应用和展望

介绍了蛋白质电子晶体学和单颗粒分析技术这两种低温电子显微技术在膜蛋白和膜蛋白复合体结构研究中的具体方法和近10~20年来的实际应用,并分别分析了这两种方法的优势和瓶颈。此外,还介绍了Amphipol替代、Streptavidin二维晶体锚定脂质体和纳米球包被脂质体等近两年来出现的新的用于低温电镜成像的膜蛋白样品制备方法。最后对膜蛋白的低温电子显微研究的未来发展做了展望。     

Genetic engineering of streptavidin,a versatile affinity tag

Streptavidin, a tetrameric protein produced by Streptomyces avidinii, has been used as a useful, versatile affinity tag in a variety of biological applications. The efficacy of streptavidin is derived from its extremely high binding affinity for the vitamin biotin. For the last several years, we have used genetic engineering as a primary means to enhance the properties of streptavidin and to expand the application of streptavidin as an affinity tag. In this review, we describe several genetically engineered streptavidin variants, which include a streptavidin with a reduced biotin-binding affinity, a dimeric streptavidin, and a fusion protein between streptavidin and protein A, along with their potential applications in biological science.     

The effect of protein impurities on lysozyme crystal growth

While bulk crystallization from impure solutions is used industrially as a purification step for a wide variety of materials, it is a technique that has rarely been used for proteins. Proteins have a reputation for being difficult to crystallize and high purity of the initial crystallization solution is considered paramount for success in the crystallization. Although little is written on the purifying capability of protein crystallization or of the effect of impurities on the various aspects of the crystallization process, recent published reports show that crystallization shows promise and feasibility as a purification technique for proteins. To further examine the issue of purity in macromolecule crystallization, this study investigates the effect of the protein impurities, avidin, ovalbumin, and conalbumin at concentrations up to 50%, on the solubility, crystal face growth rates, and crystal purity of the protein lysozyme. Solubility was measured in batch experiments while a computer controlled video microscope system was used to measure the ?110? and ?101? lysozyme crystal face growth rates. While little effect was observed on solubility and high crystal purity was obtained (>99.99%), the effect of the impurities on the face growth rates varied from no effect to a significant face specific effect leading to growth cessation, a phenomenon that is frequently observed in protein crystal growth. The results shed interesting light on the effect of protein impurities on protein crystal growth and strengthen the feasibility of using crystallization as a unit operation for protein purification.     

X-ray diffraction of a protein crystal anchored at the air/water interface.

We report the first successful in situ x-ray diffraction experiment with a 2D protein array at the lipid/water interface and demonstrate that the order can be controlled via lateral pressure or density. A protein (streptavidin) was bound to a monolayer of biotinylated lipid at the air/water interface, and diffraction of the protein layer could be measured to many orders. Compression of the monolayer changed the diffraction pattern drastically, indicating that the protein structure can be strongly influenced by external parameters like lateral pressure or density. From the width of the peaks, we find that aggregates consisting of as few as 100 monomers contribute to the diffraction. This indicates that the structure of even low order aggregates can be studied in situ. Grazing incidence diffraction can become a strong new method to study the crystallization and the interactions between proteins free from artifacts by staining or sample preparation.     

Streptavidin-binding and -dimerizing ligands discovered by phage display, topochemistry, and structure-based design

Structural and mechanistic determinants of affinity of streptavidin-binding peptide ligands discovered by phage display are reviewed along with the use of streptavidin as a paradigm for structure-based design. A novel way of producing protein-dimerizing ligands in the streptavidin model system is discussed, in which crystal packing topochemically mediates or even catalyzes dimerization of adjacent bound ligands whose reactive ligating groups are presented toward one another in productive orientations in the crystal lattice. Finally, through crystallography on a set of streptavidin complexes with small molecule and peptide ligands at multiple pHs in two space groups, the mechanism by which ligands enhance intersubunit stabilization of the streptavidin tetramer is probed.     

Two-dimensional streptavidin crystals: macropatterns and micro-organization

Two dimensional crystals of streptavidin grown on lipid monolayers can be viewed as model systems for the study of phase transitions and morphology. These crystals form a variety of macroscopic morphologies associated with different microscopic crystal structures. Observed morphologies are similar to those found in two-dimensional lipid systems, and growth of the protein arrays is somewhat analogous. Such solid state physical processes as nucleation, transformation between crystal phases, crystal phase coexistence, and roughening have been observed in the streptavidin system. In this review, we highlight observations that cause streptavidin to remain an interesting model system exhibiting a variety of intriguing phenomena.     

Crucial steps in the structure determination of the Na+/H+ antiporter NhaA in its native conformation

Sodium proton antiporters are ubiquitous membrane proteins. Their importance for cell viability is the result of their role in homeostasis of intracellular pH, cellular Na+ content and cell volume. Recently, the first structure of this family of secondary transporters, namely of NhaA from Escherichia coli, revealed a novel fold and elucidated the molecular basis for the mechanism of transport and its regulation by pH. Here, we describe the key steps for the structure determination of NhaA, an iterative process of improving protein quality as well as crystallization conditions. Protein quality was optimized by shortening the purification to a single step and by changing the expression host. The major steps for crystal improvement were the exchange of the detergent during protein purification from the beta- to the alpha-anomer of DDM, the addition of OG to the crystallization set ups, and the growth of the crystals under conditions suitable for cryo-temperatures. Unexpectedly, the dimeric association of the transporter in the 3D crystal lattice is non-physiological. A comparison of the X-ray structure with the electron density map from cryo-electron microscopy of 2D crystals demonstrates that the NhaA helix packing in the 3D crystal is identical with the one in the lipid environment. Thus, the antiporter is in a native conformation in the 3D crystals.     

Chicken avidin exhibits pseudo-catalytic properties. Biochemical, structural, and electrostatic consequences

Avidin and its bacterial analogue streptavidin exhibit similarly high affinities toward the vitamin biotin. The extremely high affinity of these two proteins has been utilized as a powerful tool in many biotechnological applications. Although avidin and streptavidin have similar tertiary and quaternary structures, they differ in many of their properties. Here we show that avidin enhances the alkaline hydrolysis of biotinyl p-nitrophenyl ester, whereas streptavidin protects this reaction even under extreme alkaline conditions (pH > 12). Unlike normal enzymatic catalysis, the hydrolysis reaction proceeds as a single cycle with no turnover because of the extremely high affinity of the protein for one of the reaction products (i.e. free biotin). The three-dimensional crystal structures of avidin (2 A) and streptavidin (2.4 A) complexed with the amide analogue, biotinyl p-nitroanilide, as a model for the p-nitrophenyl ester, revealed structural insights into the factors that enhance or protect the hydrolysis reaction. The data demonstrate that several molecular features of avidin are responsible for the enhanced hydrolysis of biotinyl p-nitrophenyl ester. These include the nature of a decisive flexible loop, the presence of an obtrusive arginine 114, and a newly formed critical interaction between lysine 111 and the nitro group of the substrate. The open conformation of the loop serves to expose the substrate to the solvent, and the arginine shifts the p-nitroanilide moiety toward the interacting lysine, which increases the electron withdrawing characteristics and consequent electrophilicity of the carbonyl group of the substrate. Streptavidin lacked such molecular properties, and analogous interactions with the substrate were consequently absent. The information derived from these structures may provide insight into the action of artificial protein catalysts and the evolution of catalytic sites in general.     

Crystal structure of the catalytic domain of human bile salt activated lipase

Bile-salt activated lipase (BAL) is a pancreatic enzyme that digests a variety of lipids in the small intestine. A distinct property of BAL is its dependency on bile salts in hydrolyzing substrates of long acyl chains or bulky alcoholic motifs. A crystal structure of the catalytic domain of human BAL (residues 1-538) with two surface mutations (N186D and A298D), which were introduced in attempting to facilitate crystallization, has been determined at 2.3 A resolution. The crystal form belongs to space group P2(1)2(1)2(1) with one monomer per asymmetric unit, and the protein shows an alpha/beta hydrolase fold. In the absence of bound bile salt molecules, the protein possesses a preformed catalytic triad and a functional oxyanion hole. Several surface loops around the active site are mobile, including two loops potentially involved in substrate binding (residues 115-125 and 270-285).     

'Crystal lattice engineering,' an approach to engineer protein crystal contacts by creating intermolecular symmetry: crystallization and structure determination of a mutant human RNase 1 with a hydrophobic interface of leucines

A protein crystal lattice consists of surface contact regions, where the interactions of specific groups play a key role in stabilizing the regular arrangement of the protein molecules. In an attempt to control protein incorporation in a crystal lattice, a leucine zipper-like hydrophobic interface (comprising four leucine residues) was introduced into a helical region (helix 2) of the human pancreatic ribonuclease 1 (RNase 1) that was predicted to form a suitable crystallization interface. Although crystallization of wild-type RNase 1 has not yet been reported, the RNase 1 mutant having four leucines (4L-RNase 1) was successfully crystallized under several different conditions. The crystal structures were subsequently determined by X-ray crystallography by molecular replacement using the structure of bovine RNase A. The overall structure of 4L-RNase 1 is quite similar to that of the bovine RNase A, and the introduced leucine residues formed the designed crystal interface. To characterize the role of the introduced leucine residues in crystallization of RNase 1 further, the number of leucines was reduced to three or two (3L- and 2L-RNase 1, respectively). Both mutants crystallized and a similar hydrophobic interface as in 4L-RNase 1 was observed. A related approach to engineer crystal contacts at helix 3 of RNase 1 (N4L-RNase 1) was also evaluated. N4L-RNase 1 also successfully crystallized and formed the expected hydrophobic packing interface. These results suggest that appropriate introduction of a leucine zipper-like hydrophobic interface can promote intermolecular symmetry for more efficient protein crystallization in crystal lattice engineering efforts.     

Controlled 2D crystallization of membrane proteins using methyl-beta-cyclodextrin

High-resolution structural data of membrane proteins can be obtained by studying 2D crystals by electron crystallography. Finding the right conditions to produce these crystals is one of the major bottlenecks encountered in 2D crystallography. Many reviews address 2D crystallization techniques in attempts to provide guidelines for crystallographers. Several techniques including new approaches to remove detergent like the biobeads technique and the development of dedicated devices have been described (dialysis and dilution machines). In addition, 2D crystallization at interfaces has been studied, the most prominent method being the 2D crystallization at the lipid monolayer. A new approach based on detergent complexation by cyclodextrins is presented in this paper. To prove the ability of cyclodextrins to remove detergent from ternary mixtures (lipid, detergent and protein) in order to get 2D crystals, this method has been tested with OmpF, a typical beta-barrel protein, and with SoPIP2;1, a typical alpha-helical protein. Experiments over different time ranges were performed to analyze the kinetic effects of detergent removal with cyclodextrins on the formation of 2D crystals. The quality of the produced crystals was assessed with negative stain electron microscopy, cryo-electron microscopy and diffraction. Both proteins yielded crystals comparable in quality to previous crystallization reports.     

Modification of protein crystal packing by systematic mutations of surface residues: Implications on biotemplating and crystal porosity

Bioinspired nano‐scale biotemplating for the development of novel composite materials has recently culminated in several demonstrations of nano‐structured hybrid materials. Protein crystals, routinely prepared for the elucidation of protein 3D structures by X‐ray crystallography, present an ordered and highly accurate 3D array of protein molecules. Inherent to the 3D arrangement of the protein “building blocks” in the crystal, a complementary 3D array of interconnected cavities—voids array, exhibiting highly ordered porosity is formed. The porous arrays of protein crystal may serve as a nano‐structured, accurate biotemplate by a “filling” process. These cavities arrays are shaped by the mode of protein packing throughout the crystallization process. Here we propose and demonstrate feasibility of targeting site specific mutations to modify protein's surface to affect protein crystal packing, enabling the generation of a series of protein crystal “biotemplates” all originating from same parent protein. The selection of these modification sites was based on in silico analysis of protein–protein interface contact areas in the parent crystal. The model protein selected for this study was the N‐terminal type II cohesin from the cellulosomal scaffold in ScaB subunit of Acetivibrio cellulolyticus and mutations were focused on lysine residues involved in protein packing as prime target. The impact of systematically mutating these lysine residues on protein packing and its resulting interconnected cavities array were found to be most significant when surface lysine residues were substituted to tryptophan residues. Our results demonstrate the feasibility of using pre‐designed site directed mutations for the generation of a series of protein crystal biotemplates from a “parent” protein. Biotechnol. Bioeng. 2009; 104: 444–457 © 2009 Wiley Periodicals, Inc.