Constrained cell recognition peptides engineered into streptavidin.

Streptavidin is widely used as an adaptor molecule in diagnostics, separations, and laboratory assay applications. We have here engineered cell adhesive peptides into the three-dimensional scaffolding of streptavidin to convert streptavidin into a functional protein. The mutations did not alter refolding or tetramer assembly and the slow biotin dissociation rate of wild-type streptavidin was retained. The peptide targets were hexapeptide sequences derived from osteopontin and fibronectin that contain the RGD cell adhesion sequence. Cell binding assays directly demonstrated that rat aortic endothelial cells and human melanoma cells adhered to surfaces coated with either of the two RGD streptavidin mutants in a dose-dependent fashion. Wild-type streptavidin displayed no significant cell binding activity. Inhibition studies with soluble RGD peptides confirmed that the cell adhesion was RGD mediated. Further inhibition studies with antibodies directed against alphavbeta3 demonstrated that the RGD-streptavidin interaction was primarily mediated by this integrin with melanoma cells. These results demonstrate that peptide recognition sequences can be engineered into accessible surface regions of streptavidin without disrupting biotin binding properties. This approach to introducing secondary functional activities into streptavidin may improve streptavidin's utility in existing applications or provide new technology opportunities.     

Genetic engineering of streptavidin,a versatile affinity tag

Streptavidin, a tetrameric protein produced by Streptomyces avidinii, has been used as a useful, versatile affinity tag in a variety of biological applications. The efficacy of streptavidin is derived from its extremely high binding affinity for the vitamin biotin. For the last several years, we have used genetic engineering as a primary means to enhance the properties of streptavidin and to expand the application of streptavidin as an affinity tag. In this review, we describe several genetically engineered streptavidin variants, which include a streptavidin with a reduced biotin-binding affinity, a dimeric streptavidin, and a fusion protein between streptavidin and protein A, along with their potential applications in biological science.     

Cell-surface streptavidin fusion protein for rapid selection of transfected mammalian cells

We developed a series of eight mammalian cell surface marker fusion genes by using the streptavidin gene from Streptomyces avidinii. These fusion genes are useful and non-growth-toxic selection markers for rapid-harvest transfected mammalian cells. Two streptavidin constructs were used; the longer fragment contains the native bacterial signal sequence, which the shorter fragment lacks. For expression of the streptavidin antigen on the surface of mammalian cells, streptavidin was flanked by a mammalian signal sequence and a transmembrane domain (from mouse H2-K or Kit); some constructs also contained the gene for enhanced green fluorescent protein (EGFP). We transfected a series of plasmids encoding the fusion proteins into HeLa cells and determined that the transfected cells produced the fusion protein on their cell surfaces. To separate transfected cells from nontransfected cells, we incubated cells with a polyclonal antibody against streptavidin, and antibody-bound cells were harvested by the use of paramagnetic beads coupled with the corresponding secondary antibody. We obtained highly pure populations of transfected cells; this result also confirmed the production of the fusion protein on the cell surface. Cell growth assays revealed that none of the transfected fusion genes or their products adversely affected the proliferation of HeLa cells. Our results indicate that the fusion constructs we developed and the immunomagnetic separation protocol we used are valuable tools for various transfection applications. In particular, the constructs containing EGFP are advantageous because transfection efficiency can be assessed without additional treatment of cells.     

Distribution and stability of membrane proteins in lipid membranes on solid supports

Bacteriorhodopsin and the nicotinic acetylcholine receptor were biotinylated and reconstituted in lipidic membranes on silicon supports by fusion with proteoliposomes. The presence and distribution of the proteins were studied by binding with streptavidin. Radio-labelled streptavidin was employed for quantifying the amounts of protein remaining in the supported membranes after storage in buffer. The proteins within the membranes remained bound to the surface for weeks. The biological activity of reconstituted unlabelled receptor upon storage showed stability in membranes formed on silicon supports and a reduced stability when formed onto lipid monolayer covered supports. Atomic force microscopy studies on preparations in liquid showed bilayer structures but also attached, partly fused liposomes and membrane particles. In air, the surface was smoother and contained less of liposomes and more of stacked lipid layers. Preparations labelled with streptavidin conjugated to colloidal gold and imaged in air showed the proteins individually distributed, with no protein-rich patches or protein aggregates.     

An efficient vector system to modify cells genetically

The transfer of foreign genes into mammalian cells has been essential for understanding the functions of genes and mechanisms of genetic diseases, for the production of coding proteins and for gene therapy applications. Currently, the identification and selection of cells that have received transferred genetic material can be accomplished by methods, including drug selection, reporter enzyme detection and GFP imaging. These methods may confer antibiotic resistance, or be disruptive, or require special equipment. In this study, we labeled genetically modified cells with a cell surface biotinylation tag by co-transfecting cells with BirA, a biotin ligase. The modified cells can be quickly isolated for downstream applications using a simple streptavidin bead method. This system can also be used to screen cells expressing two sets of genes from separate vectors.     

Next-generation sequencing for understanding and accelerating crop domestication

Next generation Sequencing (NGS) provides a powerful tool for discovery of domestication genes in crop plants and their wild relatives. The accelerated domestication of new plant species as crops may be facilitated by this knowledge. Re-sequencing of domesticated genotypes can identify regions of low diversity associated with domestication. Species-specific data can be obtained from related wild species by whole-genome shot-gun sequencing. This sequence data can be used to design species specific polymerase chain reaction (PCR) primers. Sequencing of the products of PCR amplification of target genes can be used to explore genetic variation in large numbers of genes and gene families. Novel allelic variation in close or distant relatives can be characterized by NGS. Examples of recent applications of NGS to capture of genetic diversity for crop improvement include rice, sugarcane and Eucalypts. Populations of large numbers of individuals can be screened rapidly. NGS supports the rapid domestication of new plant species and the efficient identification and capture of novel genetic variation from related species.     

Bioluminescent assays using glucose-6-phosphate dehydrogenase: application to biotin and streptavidin detection

A streptavidin-glucose-6-phosphate dehydrogenase (G6PDH) conjugate was synthesized and its properties were studied, along with those of biotin-G6PDH conjugates. Two bioluminescent assays were used. Streptavidin was assayed in two steps: streptavidin samples were first incubated with a small amount of biotin-G6PDH and then with biotinylated rabbit gamma-globulins. The complex was immobilized on a bioluminescent immunoadsorbent. In the single-step biotin assay, free biotin was allowed to compete with biotin linked to rabbit gamma-globulins for binding to streptavidin-G6PDH in the presence of the bioluminescent immunoadsorbent. Neither assay required washing or separation steps and the sensitivity was 0.2 ng for streptavidin and 100 fg for biotin. Different applications are described: studies of biotin reactivity when linked to probes in solution or immobilized, and quantitation of biotin in biotinylated DNA probes and oligonucleotides.     

A rapid direct telomerase assay method using 96-well streptavidin plates

We have developed a high-throughput direct assay methodfor the assay of telomerase activity that improves on previous direct telomerase assays in two ways that allow larger numbers of samples to be conveniently processed: (i) 96-well streptavidin coated plates are used to bind and wash biotinylated primer extension products from the telomerase assay, as opposed to tubes containing streptavidin-coated magnetic beads; and (ii) storage phosphor-imagery is used instead of film autoradiography to detect telomerase products after being washed and released from the streptavidin-derivatized matrix. This method improves on previous direct assay methods using magnetic beads by allowing larger numbers of samples to be conveniently assayed. Also, the total activity of the radiolabeled nucleotides used in this procedure is significantly lower than that used in standard direct telomerase assays, lowering costs and exposure to radioactivity. We have validated the assay by repeating, in triplicate, the IC50 determination of rivanol, our previously identified telomerase inhibitor.     

Optimisation of a multivalent Strep tag for protein detection

The Strep tag is a peptide sequence that is able to mimic biotin's ability to bind to streptavidin. Sequences of Strep tags from 0 to 5 have been appended to the N-terminus of a model protein, the Stefin A Quadruple Mutant (SQM) peptide aptamer scaffold, and the recombinant fusion proteins expressed. The affinities of the proteins for streptavidin have been assessed as a function of the number of tags inserted using a variety of labelled and label-free bioanalytical and surface based methods (Western blots, microarray assays and surface plasmon resonance spectroscopy). The binding affinity increases with the number of tags across all assays, reaching nanomolar levels with 5 inserts, an observation assigned to a progressive increase in the probability of a binding interaction occurring. In addition a novel interfacial FRET based assay has been developed for generic Strep tag interactions, which utilises a conventional microarray scanner and bypasses the requirement for expensive lifetime imaging equipment. By labelling both the tagged StrepX-SQM(2) and streptavidin targets, the conjugate is primed for label-free FRET based displacement assays.     

Applications of a peptide ligand for streptavidin: the Strep-tag

The Strep-tag constitutes a nine amino acid-peptide that binds specifically to streptavidin and occupies the same pocket where biotin is normally complexed. Since the Strep-tag participates in a reversible interaction it can be applied for the efficient purification of corresponding fusion proteins on affinity columns with immobilized streptavidin. Elution of the bound recombinant protein can be effected under mild buffer conditions by competition with biotin or a suitable derivative. In addition, Strep-tag fusion proteins can be easily detected in immunochemical assays, like Western blots or ELISAs, by means of commercially available streptavidin-enzyme conjugates. The Strep-tag/streptavidin system has been systematically optimized over the past years, including the engineering of streptavidin itself. Structural insight into the molecular mimicry between the peptide and biotin was furthermore gained from X-ray crystallographic analysis. As a result the system provides a reliable and versatile tool in recombinant protein chemistry. Exemplary applications of the Strep-tag are discussed in this review.     

ELISA-based assay for scatchard analysis of ligand-receptor interactions

A simple, nonradioactive method is presented that can be used for performing large numbers of binding assays of cell membrane receptors with their ligands. The method adopts the simple membrane preparation and biotin-based quantitation methods of the semi-intact cell endocytosis assays. After binding of the biotinylated ligand to its receptors on the semi-intact cell membranes, a rapid centrifugation step separates the membranes from unbound ligand. Bound ligand is subsequently released by detergent, captured by a specific antibody coated on the surface of microwells, and quantitated with peroxidase-conjugated streptavidin in a colorimetric assay. Using this assay, Scatchard analysis was performed on the data for the specific binding of iron-loaded transferrin to its receptors on mouse fibroblasts and yieldedK _d values similar to those obtained with other published methods. The assay is sensitive, rapid, and also convenient, because aliquots of semi-intact cells can be stored frozen. The perforated plasma membrane of the cells offers the additional possibility of screening factors that interact with the cytoplasmic domain of the receptors for their possible effects on the parameters of the extracellular ligand-receptor interaction.     

Biotin-assisted folding of streptavidin on the yeast surface

Yeast surface display allows heterologously expressed proteins to be targeted to the exterior of the cell wall and thus has a potential as a biotechnology platform. In this study, we report the successful display of functional streptavidin on the yeast surface. Streptavidin binds the small molecule biotin with high affinity (K(d) ≈ 10(-14)M) and is used widely in applications that require stable noncovalent interaction, including immobilization of biotinylated compounds on a solid surface. As such, engineering functional streptavidin on the yeast surface may find novel uses in future biotechnology applications. Although the molecule does not require any post-translational modification, streptavidin is difficult to fold in bacteria. We show that Saccharomyces cerevisiae can fold the protein correctly if induced at 20°C. Contrary to a previous report, coexpression of anchored and soluble streptavidin subunits is not necessary, as expressing the anchored subunit alone is sufficient to form a functional complex. For unstable monomer mutants, however, addition of free biotin during protein induction is necessary to display a functional molecule, suggesting that biotin helps the monomer fold. To show that surface displayed streptavidin can be used to immobilize other biomolecules, we used it to capture biotinylated antibody, which is then used to immunoprecipitate a protein target.     

Protein immobilization on aminated poly(glycidyl methacrylate) nanofibers as polymeric carriers

Recently, protein carriers based on nanomaterials have been highlighted in diverse biological applications such as protein extraction, separation, and delivery due to their facile gravimetric sedimentation in the aqueous phase and abundant surface functionalities, which were used as anchoring sites for proteins. From this viewpoint, poly(glycidyl methacrylate) nanofibers (PGMA NFs) can be an excellent candidate for protein support because PGMA NFs possess the activated epoxide functional groups on the surface. In addition, cured PGMA NFs (PGMA-NH2 NFs) reveal different surface functionalities such as primary amine groups. They can be linked with carboxylated proteins. Ferritin and streptavidin were selected as models of the pristine and biolinker-mediated proteins in this experiment and immobilized onto PGMA NFs and aminated PGMA-NH2 NFs. The successful conjugations of ferritin and streptavidin were confirmed with transmission electron microscopy and fluorescein-isothiocyanate-tagged molecules. Protein immobilization using the pristine and the cured PGMA NFs could be considered as an outstanding protocol for facile protein delivery.     

Large SNP arrays for genotyping in crop plants

Genotyping with large numbers of molecular markers is now an indispensable tool within plant genetics and breeding. Especially through the identification of large numbers of single nucleotide polymorphism (SNP) markers using the novel high-throughput sequencing technologies, it is now possible to reliably identify many thousands of SNPs at many different loci in a given plant genome. For a number of important crop plants, SNP markers are now being used to design genotyping arrays containing thousands of markers spread over the entire genome and to analyse large numbers of samples. In this article, we discuss aspects that should be considered during the design of such large genotyping arrays and the analysis of individuals. The fact that crop plants are also often autopolyploid or allopolyploid is given due consideration. Furthermore, we outline some potential applications of large genotyping arrays including high-density genetic mapping, characterization (fingerprinting) of genetic material and breeding-related aspects such as association studies and genomic selection.     

Coupling of a DNA piezoelectric biosensor and polymerase chain reaction to detect apolipoprotein E polymorphisms

In this paper we report the coupling of the Polymerase Chain Reaction (PCR) with a piezoelectric biosensor to detect a point mutation in a human gene. Biotinylated 23-mer probes were immobilised on the streptavidin coated gold surface of a quartz crystal; streptavidin was covalently bound to the thiol/dextran modified gold surface. The hybridisation of the immobilised probes with a short sequence (23 mer) complementary, non-complementary and mismatched DNA was investigated: the device was able to distinguish the different synthetic oligonucleotides. Many cycles of measurements can be performed on the same crystal surface regenerating the single strand of DNA with 1 mM of HCl. The same hybridisation reaction was then performed using real samples of human DNA extracted from blood and amplified by PCR, following a standard procedure for genetic detection of the polymorphism of the apolipoprotein E (apoE) gene. The procedure was able to distinguish the sequences present in the different samples, which differ only in one base: in this way it was possible distinguish between different groups of genotypes with apoE typing. Experiments with 'blank' samples confirmed the absence of adsorption or non-specific effects on the quartz crystal treated with the reported procedure.     

Cell-adhesive properties of streptavidin are mediated by the exposure of an RGD-like RYD site.

The interaction of streptavidin with various cell systems was studied using fluorescent derivatives of the protein. The native unprocessed form of streptavidin bound to cells at low levels and in a nonspecific manner. In contrast, both the truncated "core" streptavidin (the commercially available form) and the biotin-blocked unprocessed protein bound to cells in enhanced levels and in a specific, saturable manner. This suggests that the binding of biotin or cleavage of the terminal portion(s) of the native protein molecule causes conformational changes which lead to the exposure of sites which presumably interact with cell surface receptors. Peptide inhibition studies demonstrated that the majority of binding to cells appears to be dependent on RGD-like specificity, suggesting that the GRYDS sequence of the streptavidin molecule may exhibit such specificity. Indirect immunofluorescence assays revealed that the protein is associated mainly with the cell surface. Moreover, streptavidin was demonstrated to compete with specific monoclonal antibodies to the RGD-binding site on the GpIIbIIIa integrin of activated platelets, thus suggesting that streptavidin may facilitate binding to ubiquitous cell-surface adhesion receptors via RGD mimicry.     

Magnetic supports for immobilized enzymes and bioaffinity adsorbents

Magnetic separation of immobilized enzymes or bioaffinity adsorbents allows their selective recovery from liquors containing other suspended solids, and gives easier handling of large numbers of samples in analysis. Non-porous magnetic supports seem to be more resistant to fouling, diffusional limitation and attrition than conventional porous supports. A variety of magnetic powders and linkage methods have been used in the preparation of supports, though it is not clear how many of these have the required properties for potential applications (including linkage stability, particle size and magnetic properties). Non-porous magnetic supports are attractive for use in liquors containing fouling materials or suspended solids, either for bioaffinity adsorbents or for immobilized enzymes acting on small molecular substrates. Magnetic supports also offer considerable advantages in analysis based on bioaffinity interactions, such as immunoassay.     

A streptavidin-biotin binding system that minimizes blocking by endogenous biotin

Pretargeted radioimmunotherapy specifically targets radiation to tumors using antibody-streptavidin conjugates followed by radiolabeled biotin. A potential barrier to this cancer therapy is the presence of endogenous biotin in serum, which can block the biotin-binding sites of the antibody-streptavidin conjugate before the administration of radiolabeled biotin. Serum-derived biotin can also be problematic in clinical diagnostic applications. Due to the extremely slow dissociation of the biotin-streptavidin complex, this endogenous biotin can irreversibly block the biotin-binding sites of streptavidin and reduce therapeutic efficacy, as well as reduce sensitivity in diagnostic assays. We tested a streptavidin mutant (SAv-Y43A), which has a 67-fold lower affinity for biotin than wild type streptavidin, and three bivalent bis-biotin constructs as replacements for wild-type streptavidin and biotin used in pretargeting and clinical diagnostics. Biotin dimers were engineered with certain parameters including water solubility, biotinidase resistance, and linker lengths long enough to span the distance between two biotin-binding sites of streptavidin. The bivalent biotins were compared to biotin in exchange, retention, and off-rate assays. The faster off-rate of SAv-Y43A allowed efficient exchange of prebound biotin by the biotin dimers. In fluorescent competition experiments, the biotin dimer ligands displayed high avidity binding and essentially irreversible retention with SAv-Y43A. The off-rate of a biotinidase-stabilized biotin dimer from SAv-Y43A was 4.36 x 10(-)(6) s(-)(1), over 640 times slower compared to biotin. These findings strongly suggest that employing a mutant streptavidin in concert with a bivalent biotin can mitigate the deleterious impact of endogenous biotin, by allowing exchange of bound biotin and retention of the biotin dimer carriers.     

Suspension array technology: evolution of the flat-array paradigm.

Suspension arrays of microspheres analyzed using flow cytometry offer a new approach to multiplexed assays for large-scale screening applications. By optically encoding micron-sized polymer particles, suspension microarrays can be created to enable highly multiplexed analysis of complex samples. Each element in the array is comprised of a subpopulation of particles with distinct optical properties and each array element bears a different surface receptor. Nucleic acids, proteins, lipids or carbohydrates can serve as receptors to support the analysis of a wide range of biomolecular assemblies, and applications in genomic and proteomic research are being developed. Coupled with recent innovations for rapid serial analysis of samples, molecular analysis with microsphere arrays holds significant potential as a general analysis platform for both research and clinical applications.     

Drop-in, drop-out allele-specific PCR

Allelotyping large numbers of samples by allele-specific polymerase chain reaction (PCR) can be problematic if the DNA samples to be tested are of highly variable concentration. On the one hand, analysis of dilute DNA samples often requires nested PCR to produce a product of sufficient yield to be detectable on ethidium bromide-stained agarose gels. Such two-step assays require additional reagents, are labor-intensive, and have a higher risk of contaiminations. On the other hand, the specificity of allele-specific PCR assays can be lost at high input DNA concentrations. Large population-based genetic studies using DNA from varied sources would benefit from one-tube assays that could detect mutations in samples over a wide range of concentration. We describe a one-tube nested allele-specific PCR-based assay, in which the input DNA concentration has little effect on the assay’s yield or specificity. An assay using this method is highly sensitive and specific, and was used to type several thousand DNA samples, obtained from various sources, for a G to A transition at human transthyretin codon 122. Similar assays could be readily adapted to any high-throughput allelotype assay where input DNA is of highly variable concentration.