Enhanced Resolution of a Secondary Alcohol by Hydrolysis of a Bichiral Ester Catalyzed by Lipase from Candida cylindracea

The effect of a chiral centre in the acyl group on the resolution of esters prepared from a racemic alcohol was investigated. R-2-chloropropionic acid afforded a higher enantiomeric ratio than S-2-chioropropionic acid in the hydrolysis of the corresponding esters of racemic 1-phenylethanol catalyzed by Candida cylindracea lipase. Even when a mixture of esters prepared from racemic acid and racemic alcohol was used for resolution of the alcohol, a noteworthy high enantioselectivity was observed. The hydrolysis of a bichiral ester offers an amplification in the resolution of enantiomers of alcohols by the combination of a chemical diastereoselectivity and an enzymatic enantio- and diastereoselectivity.     

Enhanced Resolution of a Secondary Alcohol by Hydrolysis of a Bichiral Ester Catalyzed by Lipase from Candida cylindracea

The effect of a chiral centre in the acyl group on the resolution of esters prepared from a racemic alcohol was investigated. R-2-chloropropionic acid afforded a higher enantiomeric ratio than S-2-chioropropionic acid in the hydrolysis of the corresponding esters of racemic 1-phenylethanol catalyzed by Candida cylindracea lipase. Even when a mixture of esters prepared from racemic acid and racemic alcohol was used for resolution of the alcohol, a noteworthy high enantioselectivity was observed. The hydrolysis of a bichiral ester offers an amplification in the resolution of enantiomers of alcohols by the combination of a chemical diastereoselectivity and an enzymatic enantio- and diastereoselectivity.     

Esterification of 2-methylalkanoic acids Catalysed by Lipase from Candida rugosa: Enantioselectivity as a Function of water Activity and Alcohol Chain Length

Esterifications catalysed by immobilised lipase from Candida rugosa (CRL) in cyclohexane at constant water activity (a_w = 0.76) were studied using 2-methyl substituted octa-, nona- or decanoic acids and n-alcohols of varying chain length as substrates. The importance of controlling the water activity and choosing the right alcohol for obtaining maximum enantioselectivity is demonstrated. The immobilised lipase was easily recovered without loss of activity and enantioselectivity.     

Effects of Alcohol and Buffer Treatments on the Activity and Enantioselectivity of Candida rugosa Lipase

Abstract

Several treatments were employed on Candida rugosa lipase (CRL) to improve its biocatalytic performance. Besides conventional alcohol treatment conditions, the effects of pH of the buffer solution used in the treatment as well as the changes in stirring, dialysis, and centrifugation steps of the treatment procedure were investigated for the first time for the resolution of racemic naproxen methyl ester. The highest enantioselectivity and conversion in S-naproxen production were achieved by CRL treated with pH 7.5 buffer solution. The elimination of the centrifugation step resulted in an increase in the enantioselectivity, whereas alcohol treatment of CRL was found to be inconvenient for S-naproxen production. Higher activity for p-nitrophenyl acetate was achieved when 20% butanol and pH 4 buffer solution were used, and when dialysis and stirring times were shortened.     

Esterification of 2-methylalkanoic acids Catalysed by Lipase from Candida rugosa: Enantioselectivity as a Function of water Activity and Alcohol Chain Length

Esterifications catalysed by immobilised lipase from Candida rugosa (CRL) in cyclohexane at constant water activity (a_w = 0.76) were studied using 2-methyl substituted octa-, nona- or decanoic acids and n-alcohols of varying chain length as substrates. The importance of controlling the water activity and choosing the right alcohol for obtaining maximum enantioselectivity is demonstrated. The immobilised lipase was easily recovered without loss of activity and enantioselectivity.     

On the Prediction of the Enantioselectivity of Candida rugosa Lipase by Comparative Molecular Field Analysis

Comparative molecular field analysis (CoMFA) was used to derive a quantitative substrate model for the enzymatic resolution of norbornanol esters by the lipase of Candida rugosa. Within these calculations, the steric and electrostatic interactions of both enantiomers and the differences in the corresponding two fields were used for the correlation of the substrate structure with the enantioselectivity of the hydrolysis. Different alignments of the molecules were used to improve the model.     

Lipase kinetics: hydrolysis of triacetin by lipase from Candida cylindracea in a hollow-fiber membrane reactor

The aptitude of a hollow-fiber membrane reactor to determine lipase kinetics was investigated using the hydrolysis of triacetin catalyzed by lipase from Canadida cylindracea as a model system. The binding of the lipase to the membrane appears not to be very specific (surface adsorption), and probably its conformation is hardly altered by immobilization, resulting in an activity comparable to that of the enzyme in its native form. The reaction kinetics defined on the membrane surface area were found to obey Michaelis-Menten kinetics. The specific activity of the lipase in the membrane reactor was found to be significantly higher than in an emulsion reactor. The activity and stability of the enzyme immobilized on a hydrophilic membrane surface seem not to be influenced significantly by the choice of the membrane material. The hollow-fiber membrane reactor is a suitable tool to assess lipase kinetics in a fast and convenient way.     

Enantioselectivity of Candida rugosa lipases (Lip1, Lip3, and Lip4) towards 2-bromo phenylacetic acid octyl esters controlled by a single amino acid

Enantiomer discrimination by enzymes is a very accurate mechanism, which often involves few amino acids located at the active site. Lipase isoforms from Candida rugosa are very good enzymatic models to study this phenomenon as they display high sequence homology (>80%) and their enantioselectivity is often pointed out. In the present work, we investigated three lipases from C. rugosa (Lip1, Lip3, and Lip4, respectively) towards the resolution of 2-bromo-arylacetic acid esters, an important class of chemical intermediates in the pharmaceutical industry. All exhibited a high enantioselectivity, with Lip4 preferring the R-enantiomer (E-value = 15), while Lip1 and Lip3 showed an S-enantioselectivity >200. A combination of sequence and structure analysis of the three C. rugosa lipases suggested that position 296 could play a role in S- or R-enantiomer preference of C. rugosa lipases. This led to the construction by site-directed mutagenesis of Lip1 and Lip4 variants in which position 296 was, respectively, exchanged by a Gly, Ala, Leu, or Phe amino acid. Screening of these variants for their enantioselectivity toward 2-bromo phenyl acetic acid octyl esters revealed that steric hindrance of the amino acid residue introduced at position 296 controls both the enantiopreference and the enantioselectivity value of the lipase: bulkier is the amino acid at position 296, larger is the selectivity towards the S-enantiomer. To investigate further these observations at an atomic level, we carried out a preliminary modeling study of the tetrahedral intermediates formed by Lip1 and Lip4 with the (R, S)-2-bromo-phenylacetic acid octyl ester enantiomers that provides some insight regarding the determinants responsible for lipase enantiodiscrimination.     

Media Formulation using Complex Organic Nutrients for Improved Activity,Productivity, and Yield of Candida rugosa Lipase and Esterase Enzymes

Abstract

Candida rugosa is an excellent source of multiple lipase and esterase enzymes; therefore, it is of technological importance to formulate the medium that provides high activity for each enzyme. In this work, the cultivation medium comprising complex nutrients that provided the highest activity, productivity, and yield of C. rugosa enzymes individually was formulated. Time courses of the extracellular and intracellular lipase and esterase activities of C. rugosa were represented and the role of protease in the cultivation progress was discussed. Urea, soy-peptone, yeast extract, a mixture of soy-peptone and yeast extract, cheese whey, and wheat mill bran were tested for their lipolytic and esterasic activities. Urea provided considerably higher extracellular lipase activity when compared to other nitrogen sources; however, soy-peptone provided the highest extracellular esterase activity. Hazelnut, olive, sesame, soybean, and flax seed oils affected the enzyme activities to different extents related to their fatty acid compositions. Hazelnut oil and olive oil provided the highest extracellular lipase and esterase activities, respectively, whereas sesame oil produced the highest biomass. High C₁₈ and C₁₆ ester contents of vegetable oils promoted high lipase and esterase productions, respectively. A temperature of 30°C yielded the highest extracellular and intracellular lipase and esterase activities; however, 35°C produced the highest biomass.     

Studies on the Stability of Lipase from Candida Cylindracea, Free and Incorporated in Polymerisable Zwitterionic Surfactant Vesicles

Lipase from Candida cylindracea (CCL) was incorporated into vesicles of a polymerisable zwitterionic surfactant: bis[2-(pentacosa-10,12-diynoyloxy)ethyl]-2-aminoethanesulfonic acid (BPAS). Vesicle systems of BPAS were characterised in terms of morphology (Electron Microscopy) and stability. Polymerisation of BPAS vesicles did not alter the morphology and polymeric vesicles were considerably more stable than the monomeric analogues. CCL was incorporated into the vesicle membrane by spontaneous insertion. The enzyme remained fully active after incorporation into the vesicle bilayer; especially in homogeneous assay mixtures the vesicle incorporated enzyme showed an increased activity when compared to the free lipase. The stability of free and incorporated lipase was determined by measuring the residual activity of the various systems when mixed with ethanol (50% v/v) or 2-(n-butoxy)ethanol (37.5% v/v), at 50°C and 60°C and in the presence of the proteolytic enzyme trypsin. In all cases the vesicle incorporated enzyme showed an increased stability against the denaturating conditions.     

Structured modeling and state estimation in a fermentation process: Lipase production by Candida rugosa

A simple structured mathematical model coupled with a methodology of state and parameter estimation is developed for lipase production by Candida rugosa in batch fermentation. The model describes the system according to the following qualitative observations and hypothesis: Lipase production is induced by extracellular oleic acid present in the medium. The acid is transported into the cell where it is consumed, transformed, and stored. Lipase is excreted to the medium where it is distributed between the available oil-water interphase and aqueous phase. Cell growth is modulated by the intracellular substrate concentration. Model parameters have been determined and the whole model validated against experiments not used in their determination. The estimation problem consists in the estimation of three state variables (biomass, intra- and extracellular substrate) and two kinetic parameters by using only the on-line measurement provided by exhaust gas analysis. The presented estimation strategy divides the complex problem into three subproblems that can be solved by stable algorithms. The estimation of biomass (X) and the specific growth rate (mu), is achieved by a recursive prediction error algorithm using the on-line measurement of the carbon dioxide evolution rate. mu is then used to perform an estimation of intracellular substrate and the other kinetic parameter related to substrate transport (A) by an adaptive observer. Extracellular substrate is then evaluated by means of the estimated values of intracellular substrate and biomass through the material balance of the reactor. Simulation and experimental tests showed good performance of the developed estimator, which appears suitable to be used for process control and monitoring. (c) 1995 John Wiley & Sons, Inc.     

Enantioselectivity of Candida Rugosa Lipase Toward Carboxylic Acids: A Predictive Rule from Substrate Mapping and X-Ray Crystallography

We used substrate mapping to develop a rule that predicts which enantiomer of chiral carboxylic acid esters reacts faster in hydrolyses catalyzed by lipase from Candida rugosa (CRL, triacylglycerol hydrolase, E. C. 3.1.1.3). This rule, based on the size of the substituents at the stereocenter, is not reliable for crude CRL. It predicts the favoured enantiomer for only 23 out of 34 examples, 68% reliability. However, this rule is completely reliable for purified CRL; it predicts the favoured enantiomer for all 16 examples correctly. The examples include arylpropanoicacids, aryloxypropanoic acids, α-halophenylacetic acids, mandelic acid and O-methylmandelic acid. Further, purified CRL did not catalyse the hydrolysis of N-CBZ-phenylalanine methyl ester and N-CBZ-norleucine methyl ester. These two substrates were exceptions to the rule with crude CRL as the catalyst. Besides eliminating several exceptions, purification also raised the enantioselectivity of CRL toward carboxylic acid esters. To provide a structural basis for this proposed rule we examined the x-ray crystal structure of CRL containing transition state analogs of ester hydrolysis. We suggest that the large substituent of chiral carboxylic acids binds in a tunnel that normally binds the alkyl chain of a fatty acid. The phenyl rings of Phe 345 and Phe 415 lie close to the stereocenter, thereby fixing the orientation of the medium substituent. The three-dimensional orientation of these proposed binding sites is consistent with the rule derived from substrate mapping.     

Hydrolysis and Esterification with Lipase from Candida Cylindracea. Influence of the Reaction Conditions and Acid Moiety on the Enantiomeric Excess

The enantiomeric ratio for hydrolysis and synthesis of 1-phenyl ethanol esters of straight chain aliphatic carboxylic acids catalyzed by Candida cylindracea lipase was determined. A distinct maximum in enantiomeric ratio was observed for valeric and caproic acid in the hydrolytic direction. No significant maximum could be determined in the esterification reaction. Even though the enzyme provided larger enantiomeric ratios in the synthetic direction the enantiomeric excess of the alcohol was not higher. The enantiomeric excess was depressed by racemization reactions in the esterification as the reaction approached thermodynamic equilibrium at an insufficient conversion. While choosing the optimal chain length of the acyl donor is important in hydrolytic reactions it seems to be of greater value to raise the equilibrium conversion in the esterification reactions.     

Lipase activity in vesicular systems: characterization of candida cylindracea lipase and its activity in polymerizable dialkylammonium surfactant vesicles

Lipase from Candida cylindracea (CCL) was incorporated into polymerizable positively charged dialkylammonium bromide surfactant vesicles. The enzyme was incorporated by the use of the dehydration-rehydration method or by incubation. In the latter case, trapping efficiencies of up to 100% could be obtained. Activities of free and vesicle-incorporated CCL were tested for three triglycerides: triacetin, tributyrin, and tricaprylin. Enzyme activity was lowest in homogeneous mixtures (triacetin and small concentrations of tributyrin) and highest in heterogeneous mixtures (tricaprylin and high concentrations of tributyrin). Entrapment in vesicular systems is advantageous, especially in homogeneous reaction mixtures and in the case of the production of insoluble fatty acid (caproate), because inhibition by the acid can be suppressed. The influence of several surface-active additives, including vesicles, on the activity of lipase in triglyceride assays was tested. Vesicles have a positive influence on the activity, whereas other positively charged additives act as inhibitors. In the case of tricaprylin assays, the positively charged additives increase the activity. Finally, tryptic digestion for free and incorporated CCL were compared. Free CCL is readily inactivated, whereas incorporated enzyme is protected from proteolytic degradation. (c) 1993 John Wiley & Sons, Inc.     

Enantiomeric Separations of Pyriproxyfen and its Six Chiral Metabolites by High‐Performance Liquid Chromatography

Pyriproxyfen is a chiral insecticide, and over 10 metabolites have been identified in the environment. In this work the separations of the enantiomers of pyriproxyfen and its six chiral metabolites were studied by high‐performance liquid chromatography (HPLC). Both normal phase and reverse phase were applied using the chiral columns Chiralpak IA, Chiralpak IB, Chiralpak IC, Chiralcel OD, Chiralcel OD‐RH, Chiralpak AY‐H, Chiralpak AD‐H, Chiracel OJ‐H, (R,R)‐Whelk‐O 1, and Lux Cellulose‐3. The effects of the chromatographic parameters such as mobile phase composition and temperature on the separations were investigated and the enantiomers were identified with an optical rotation detector. The enantiomers of these targets could obtain complete separations (resolution factor Rs > 1.5) on Chiralpak IA, Chiralpak IB, Chiralcel OD, Chiralpak AY‐H, or Chiracel OJ‐H under normal conditions. Chiralcel OJ‐H showed the best chiral separation results with n‐hexane as mobile phase and isopropanol (IPA) as modifier. The simultaneous enantiomeric separation of pyriproxyfen and four chiral metabolites was achieved on Chiralcel OJ‐H under optimized condition: n‐hexane/isopropanol = 80/20, 15°C, flow rate of 0.8 ml/min, and UV detection at 230 nm. The enantiomers of pyriproxyfen and the metabolites A , C , and D obtained complete separations on Chiralpak IA, Chiralpak IC, and Lux Cellulose‐3 under reverse phase using acetonitrile/water as the mobile phase. The retention factors (k) and selectivity factors (α) decreased with increasing temperature, and the separations were better under low temperature in most cases. The work is of significance for the investigation of the environmental behaviors of pyriproxyfen on an enantiomeric level. Chirality 28:245–252, 2016. © 2016 Wiley Periodicals, Inc.     

Preparation and Enantioselectivity Binding Studies of a New Chiral Cobalt(II)porphyrin‐Tröger's Base Conjugate

A new bis[cobalt(II)porphyrin]‐Tröger's base conjugate was studied as a potential receptor for methyl esters of several amino acids. The conjugate was prepared as racemate, and then resolved via preparative high‐performance liquid chromatography (HPLC) on a chiral column. The high affinity to lysine, histidine, and proline methyl esters was found by complexation studies followed by UV‐Vis spectroscopy. The studies of pure enantiomers, followed by UV‐Vis and electronic circular dichroism spectroscopy, revealed the highest enantioselectivity for lysine methyl ester. Chirality 26:361–367, 2014. © 2014 Wiley Periodicals, Inc.     

Chiral enamines derived from 2-(2′-pyrido)acetophenone and 2-(2′-quinolino)acetophenone as ligands in copper(I) catalyzed enantioselective cyclopropanations

Optically active enamines of 2-(2′-pyrido)acetophenone or 2-(2′-quinolino)acetophenone with (R)-1-phenylethylamine, (R)-1-(1-naphthyl)ethylamine, (R)-cyclohexylethylamine, and (R)-phenylglycinol were prepared and their copper(I) complexes used in the enantioselective cyclopropanation of styrene with ethyl- and menthyldiazoacetate. Enantioselectivities of up to 42% enantiomeric excess were obtained for cis/trans 2-phenylcyclopropan-1-carboxylic acid ethyl esters, as determined by gas-liquid chromatography (GLC) on chiral chromatographic columns. © 1995 Wiley-Liss, Inc.     

液质联用多反应监测法定量目标多肽或蛋白质

为建立优化的血浆内源性多肽提取方法,并且构建目标多肽和蛋白质的质谱定量方 法,本研究考察了超滤法、有机溶剂沉淀法和固相萃取法对血浆内源性多肽的提取效果 ,并通过Tricine-SDS-PAGE对提取效果进行比较.通过液相色谱串联质谱多反应监测 （MRM）分析,建立了多肽标准品ESAT-6定量方法,并将ESAT-6定量建立的液相色谱和质谱条件应用于蛋白质的定量,对多肽和蛋白质MRM定量的标准曲线进行了考 察.Tricine-SDS-PAGE结果表明,乙腈沉淀法是最佳的血浆内源性多肽提取方法,低分子量的多肽可以得到很好的富集,且能有效地去除高分子蛋白质的污染.液相色谱串联 质谱MRM法检测血浆内提取的多肽,标准曲线的线性较好,相关系数为0.999.另外,采 用MRM法对胶内分离的蛋白质进行定量,标准曲线的线性相关系数为0.995.综上所述, 本研究构建了一种简单有效的血浆多肽提取方法,通过液质联用MRM法成功地实现了目标多肽和蛋白质定量测定.该定量方法可以推广应用于复杂样品中的多肽和蛋白质的定 量分析.     

Improvement of catalytic activity of lipase from Candida rugosa via sol-gel encapsulation in the presence of calix(aza)crown

Lipase from Candida rugosa (CRL) was encapsulated within a chemically inert sol-gel support in the presence of calix(aza)crowns as the new additives. The catalytic activity of the encapsulated lipases was evaluated both in the hydrolysis of p-nitrophenyl palmitate (p-NPP) and the enantioselective hydrolysis of racemic Naproxen methyl ester. It has been observed that the percent activity yields of the calix(aza)crown based encapsulated lipases were higher than that of the free lipase. Improved enantioselectivity was observed with the calix(aza)crown-based encapsulated lipases as compared to encapsulated free lipase. The reaction of Naproxen methyl ester resulted in 48.4% conversion for 24 h and 98% enantiomeric excess for the S-acid, corresponding to an E value of >300 (E = 166 for the encapsulated free enzyme). Moreover, the encapsulated lipases were still retained about 18% of their conversion ratios after the sixth reuse in the enantioselective reaction.     

Resolution of N-(2-ethyl-6-methylphenyl) alanine catalyzed by Lipase B from Candida antarctica

A biotransformation process has been developed for the production of (S)-N-(2-ethyl-6-methylphenyl) alanine by enantioselective hydrolysis of racemic methyl ester in the presence of Candida antarctica lipase B (CAL-B). However, the enantioselectivity of CAL-B towards the resolution is not high enough to obtain enantiomerically pure product. In order to improve the enantioselectivity of the enzyme, the effects of surfactants on CAL-B-catalyzed hydrolysis were tested. The results suggest that surfactants can influence the microenvironment of the enzyme, and the addition of Tween-80, in particular, to the reaction medium markedly enhanced the selectivity of CAL-B towards the substrate used, with the enantiomeric ratio (E-value) increasing from 11.3 to 60.1.