Amino acid residues stabilizing a Bacillus alpha-amylase against irreversible thermoinactivation

The alpha-amylase of Bacillus licheniformis (BLA) is stable and active at high temperature. More than 80% of its activity is retained after heat treatment at 90 degrees C for 30 min, and the optimum temperature for its activity is 80-85 degrees C. In contrast, the alpha-amylase of Bacillus amyloliquefaciens (BAA), the amino acid sequence of which shows 80% homology with that of BLA, is rapidly inactivated at 90 degrees C. Various chimeric genes were constructed from the structural genes for the two enzymes, and their products were analyzed for stability as to irreversible thermoinactivation. Two regions in the amino acid sequence of BLA comprising Gln178 (region I) and the 255th-270th residues (region II), respectively, were shown to determine the thermostability of BLA. Region I plays a major role in determining the thermostability. By means of site-directed mutagenesis of the BAA gene, deletion of Arg176 and Gly177 in region I and substitutions of alanine for Lys269 and aspartic acid for Asn266 in region II were shown to be responsible for the enhancement of the thermostability. Mutant BAAs containing the above deletion and substitutions showed almost the same thermostability as BLA as to irreversible thermoinactivation. Nevertheless, the mutant BAAs showed a temperature optimum as low as that of BAA (65 degrees C), indicating that they are still susceptible to reversible inactivation at temperatures higher than 65 degrees C.     

Investigation on the effects of three X-->histidine replacements on thermostability of alpha-amylase from Bacillus amyloliquefaciens

Bacillus licheniformis alpha-amylase (BLA), a thermophilic counterpart of Bacillus amyloliquefaciens alpha-amylase (BAA), is an appropriate model for the design of stabilizing mutations in BAA. BLA has 10 more histidines than BAA. Considering this prominent difference, in the present study, three out of these positions (I34, Q67, and P407; located in the thermostability determinant 1 region and Ca-III binding site of BAA) were replaced with histidine in BAA, using the site-directed mutagenesis technique. The results showed that the thermostability of P407H and Q67H mutants had increased, but no significant changes were observed in their kinetic parameters compared to that of the wild type. I34H replacement resulted in complete loss of enzyme activity. Moreover, fluorescence and circular dichroism data indicated a more rigid structure for the P407H variant compared with that of the wild-type BAA. However, the flexibility of Q67H and I34H mutants increased in comparison with that of wild-type enzyme.     

Activity and stability of a thermostable alpha-amylase compared to its mesophilic homologue: mechanisms of thermal adaptation

To elucidate how enzymes adapt to extreme environmental conditions, a comparative study with a thermostable alpha-amylase from Bacillus licheniformis (BLA) and its mesophilic homologue from Bacillus amyloliquefaciens (BAA) was performed. We measured conformational stability, catalytic activity, and conformational fluctuations on the picosecond time scale for both enzymes as a function of temperature. The objective of this study is to analyze how these properties are related to each other. BLA shows its maximal catalytic activity at about 90-95 degrees C and a strongly reduced activity (only 20% of the maximum) at room temperature. Although B. licheniformis itself is a mesophilic organism, BLA shows an activity profile typical for a thermophilic enzyme. In contrast to this, BAA exhibits its maximal activity at about 80 degrees C but with a level of about 60% activity at room temperature. In both cases the unfolding temperatures T(m) are only 6 degrees C (BAA, T(m) = 86 degrees C) and 10 degrees C (BLA, T(m) = 103 degrees C), respectively, higher than the temperatures for maximal activity. In contrast to many previous studies on other thermophilic-mesophilic pairs, in this study a higher structural flexibility of the thermostable BLA was measured as compared to the mesophilic BAA. The findings of this study neither indicate a proportionality between the observed dynamics and the catalytic activity nor support the idea of more "rigid" thermostable proteins, as often proposed in the concept of "corresponding states".     

Nucleotide sequence, structural investigation and homology modeling studies of a Ca2+-independent alpha-amylase with acidic pH-profile

The novel alpha-amylase purified from locally isolated strain, Bacillus sp. KR-8104, (KRA) (Enzyme Microb Technol; 2005; 36: 666-671) is active in a wide range of pH. The enzyme maximum activity is at pH 4.0 and it retains 90% of activity at pH 3.5. The irreversible thermoinactivation patterns of KRA and the enzyme activity are not changed in the presence and absence of Ca(2+) and EDTA. Therefore, KRA acts as a Ca(2+)-independent enzyme. Based on circular dichroism (CD) data from thermal unfolding of the enzyme recorded at 222 nm, addition of Ca(2+) and EDTA similar to its irreversible thermoinactivation, does not influence the thermal denaturation of the enzyme and its T(m). The amino acid sequence of KRA was obtained from the nucleotide sequencing of PCR products of encoding gene. The deduced amino acid sequence of the enzyme revealed a very high sequence homology to Bacillus amyloliquefaciens (BAA) (85% identity, 90% similarity) and Bacillus licheniformis alpha-amylases (BLA) (81% identity, 88% similarity). To elucidate and understand these characteristics of the alpha-amylase, a model of 3D structure of KRA was constructed using the crystal structure of the mutant of BLA as the platform and refined with a molecular dynamics (MD) simulation program. Interestingly enough, there is only one amino acid substitution for KRA in comparison with BLA and BAA in the region involved in the calcium-binding sites. On the other hand, there are many amino acid differences between BLA and KRA at the interface of A and B domains and around the metal triad and active site area. These alterations could have a role in stabilizing the native structure of the loop in the active site cleft and maintenance and stabilization of the putative metal triad-binding site. The amino acid differences at the active site cleft and around the catalytic residues might affect their pKa values and consequently shift its pH profile. In addition, the intrinsic fluorescence intensity of the enzyme at 350 nm does not show considerable change at pH 3.5-7.0.     

An analysis of temperature adaptation in cold active, mesophilic and thermophilic Bacillus α-amylases

A comparative biochemical and structural study was performed on a cold active α-amylase from Bacillus cereus (BCA) and two well-known homologous mesophilic and thermophilic α-amylases from Bacillus amyloliquefaciens (BAA) and Bacillus licheniformis (BLA). In spite of a high degree of sequence and structural similarity, drastic variations were found for T_opt as 50, 70 and 90 °C for BCA, BAA and BLA, respectively. The half-lives of thermoinactivation were 1 and 9 min for BCA and BAA at 80 °C respectively, whilst there was no inactivation for BLA at this temperature. Thermodynamic studies on inactivation process suggested that lower thermostability of BCA is due to lower inactivation slope of the Arrhenius plots and subsequently, lower E_a and ΔH^#. Increased K_m and accessible surface area for catalytic residues along with a decreased number of internal interactions in this region in BCA compared to BLA suggest that BCA substrate-binding site might be temperature sensitive and is probably more flexible. On the other hand, fewer ion pairs, destructive substitutions and disruption of aromatic interaction networks in structurally critical regions of Bacillus α-amylases result in a severe decrease in BCA thermostability compared to its mesophilic and thermophilic homologues.     

Comparative studies on trifluoroethanol (TFE) state of a thermophilic alpha-amylase and its mesophilic counterpart: limited proteolysis, conformational analysis, aggregation and reactivation of the enzymes

Detailed circular dichroism (CD), scattering and quenching studies, 1-anilinonaphthalene-8-sulfonate (ANS) binding, irreversible thermoinactivation, activity measurements and proteolytic digestion of bacterial alpha-amylases have been carried out to elucidate the effect of trifluoroethanol (TFE) on the structure of these enzymes. Under high concentrations of TFE both of the alpha-amylases, a thermostable alpha-amylase from Bacillus licheniformis (BLA) and its mesophilic counterpart from Bacillus amyloliquefaciens (BAA), acquire partially folded state characterized by an enhanced content of the secondary structure (helix) and reduced tertiary structures. According to ANS binding studies, we suggest that the TFE states induced by TFE/water mixture are not the molten globule state in the alpha-amylase folding pathway. In addition, data shows significant reversible aggregation of both enzymes in TFE/water mixtures with concentration between 10 and 60% (v/v). However, reversibility is more in case of BAA. As expected, in the absence of TFE, the thermophilic enzyme compared to mesophilic enzyme, shows a greater resistance to digestion by thermolysin. With respect to fluorescence quenching by acrylamide and potassium iodide, the thermophilic enzyme, BLA, is characterized by higher structural flexibility as compared to the BAA. On the other hand, in the presence of TFE, the enzymes are digested by protease to produce large protein fragments. It is proposed that highly helical secondary structures, acquired by BAA and BLA when dissolved in aqueous TFE, prevent binding and adaptation of the protein substrate at the active site of the protease.     

Thermostabilization of Bacillus amyloliquefaciens alpha-amylase by chemical cross-linking

Chemical cross-linking of a mesophilic alpha-amylase from Bacillus amyloliquefaciens (BAA) was carried out. Intra-molecular cross-links between lysine residues upon treatment of the enzyme with ethylene glycol bis(succinic acid N-hydroxy succinimide ester) resulted in enhancement of thermostability as indicated by irreversible thermoinactivation experiments. Enhancement of thermostability coincided with a dramatic protection against aggregation, combined with a decrease in surface hydrophobicity. Deamidation, another important mechanism of irreversible thermoinactivation, was also diminished upon modification. While no significant changes in the kinetic parameters are evident, rigidification of the protein structure is suggested by circular dichroism (CD) and fluorescence studies.     

粘质赛氏菌胞外蛋白酶的化学修饰

用九种化学修饰剂研究了粘质赛氏菌ＳｅｒｒａｔｉａＭａｒｃｅｓｃｅｎｓ４１００３（２）胞外蛋白酶分子中氨基酸侧链基团与酶催化活性的关系,结果表明组氨酸、丝氨酸、赖氨酸、精氨酸、谷氨酸及天冬氨酸等残基与酶活性无关;半胱氨酸残基与酶活性也无直接关系;而酪氨酸和色氨酸残基侧链的修饰引起酶活力大幅度下降,说明酪氨酸和色氨酸残基为酶活力必需．     

Comparison of the molten globule states of thermophilic and mesophilic alpha-amylases

In recent years great interest has been generated in the process of protein folding, and the formation of intermediates during the folding process has been proven with new experimental strategies. In the present work, we have examined the molten globule state of Bacillus licheniformis alpha-amylase (BLA) by intrinsic fluorescence and circular dichroism spectra, 1-anilino naphthalene-8-sulfonate (ANS) binding and proteolytic digestion by pepsin, for comparison to its mesophilic counterpart, Bacillus amyloliquefaciens alpha-amylase (BAA). At pH 4.0, both enzymes acquire partially folded state which show characteristics of molten globule state. They unfold in such a way that their hydrophobic surfaces are exposed to a greater extent compared to the native forms. Chemical denaturation studies by guanidine hydrochloride and proteolytic digestion with pepsin show that molten globule state of BLA is more stable than from BAA. Results from gel filtration indicate that BAA has the same compactness at pH 4.0 and 7.5. However, molten globule state of BLA is less compact than its native state. The effects of polyols such as trehalose, sorbitol and glycerol on refolding of enzymes from molten globule to native state were also studied. These polyols are effective on refolding of mesophilic alpha-amylase but only slightly effect on BLA refolding. In addition, the folding pathway and stability of intermediate state of the thermophilic and the mesophilic alpha-amylases are discussed.     

Effect of Glycosylation on the Catalytic and Conformational Stability of Homologous α-Amylases

summary. A thermostable -amylase from B. licheniformis (BLA) and a mesophilic amylase from B. amyloliquefaciens (BAA) were covalently coupled to oxidized synthetic sucrose polymers (OSP400 and OSP70) and polyglutaraldehyde (PGA) by reductive alkylation to study the effect of neoglycosylation on the activity, kinetic and thermodynamic stability. The catalytic efficiency of the modified enzymes was comparable to that of the native enzyme. Covalent coupling decreased the rate of inactivation at all the temperatures studied, both in the presence and absence of added Ca²⁺. The stability of the native enzyme was found to increase upon modification as observed from the increase in t_1/2 in the absence of Ca²⁺ ions by about 1.5–13.7 times (at 85°C) in the case of BLA and 5.7–8.4 times (at 50°C) for BAA. The highest stability was observed for OSP400 modified enzyme with C_m and T_m values of 0.63 M and 7.92°C for BLA and 0.85 M and 5.3°C for BAA, respectively. The order of stability was OSP400 > OSP70 > PGA > Native for both BLA and BAA. The stability of the modified amylases obtained from the present study were superior compared to most of the single and double mutants obtained by site-directed mutagenesis that were constructed so as to enhance the intrinsic stability of these enzymes.This article is dedicated to Dr. P.V. Sundaram.     

Structural stability and unfolding properties of thermostable bacterial alpha-amylases: a comparative study of homologous enzymes

In a comparative investigation on two thermostable alpha-amylases [Bacillus amyloliquefaciens (BAA), T(m) = 86 degrees C and Bacillus licheniformis (BLA), T(m) = 101 degrees C], we studied thermal and guanidine hydrochloride (GndHCl)-induced unfolding using fluorescence and CD spectroscopy, as well as dynamic light scattering. Depletion of calcium from specific ion-binding sites in the protein structures reduces the melting temperature tremendously for both alpha-amylases. The reduction is nearly the same for both enzymes, namely, in the order of 50 degrees C. Thus, the difference in thermostability between BLA and BAA (DeltaT(m) approximately 15 degrees C) is related to intrinsic properties of the respective protein structures themselves and is not related to the strength of ion binding. The thermal unfolding of both proteins is characterized by a full disappearance of secondary structure elements and by a concurrent expansion of the 3D structure. GndHCl-induced unfolding also yields a fully vanishing secondary structure but with more expanded 3D structures. Both alpha-amylases remain much more compact upon thermal unfolding as compared to the fully unfolded state induced by chemical denaturants. Such rather compact thermal unfolded structures lower the conformational entropy change during the unfolding transition, which principally can contribute to an increased thermal stability. Structural flexibilities of both enzymes, as measured with tryptophan fluorescence quenching, are almost identical for both enzymes in the native states, as well as in the unfolded states. Furthermore, we do not observe any difference in the temperature dependence of the structural flexibilities between BLA and BAA. These results indicate that conformational dynamics on the time scale of our studies seem not to be related to thermal stability or to thermal adaptation.     

Chemical modification of lysine residues in Bacillus licheniformis alpha-amylase: conversion of an endo- to an exo-type enzyme

The lysine residues of Bacillus licheniformis alpha-amylase (BLA) were chemically modified using citraconic anhydride or succinic anhydride. Modification caused fundamental changes in the enzymes specificity, as indicated by a dramatic increase in maltosidase and a reduction in amylase activity. These changes in substrate specificity were found to coincide with a change in the cleavage pattern of the substrates and with a conversion of the native endo- form of the enzyme to a modified exo- form. Progressive increases in the productions of rho-nitrophenol or glucose, when para nitrophenyl-maltoheptaoside or soluble starch, respectively, was used as substrate, were observed upon modification. The described changes were affected by the size of incorporated modified reagent: citraconic anhydride was more effective than succinic anhydride. Reasons for the observed changes are discussed and reasons for the effectivenesses of chemical modifications for tailoring enzyme specificities are suggested.     

Directed evolution of a bacterial alpha-amylase: toward enhanced pH-performance and higher specific activity

alpha-Amylases, in particular, microbial alpha-amylases, are widely used in industrial processes such as starch liquefaction and pulp processes, and more recently in detergency. Due to the need for alpha-amylases with high specific activity and activity at alkaline pH, which are critical parameters, for example, for the use in detergents, we have enhanced the alpha-amylase from Bacillus amyloliquefaciens (BAA). The genes coding for the wild-type BAA and the mutants BAA S201N and BAA N297D were subjected to error-prone PCR and gene shuffling. For the screening of mutants we developed a novel, reliable assay suitable for high throughput screening based on the Phadebas assay. One mutant (BAA 42) has an optimal activity at pH 7, corresponding to a shift of one pH unit compared to the wild type. BAA 42 is active over a broader pH range than the wild type, resulting in a 5-fold higher activity at pH 10. In addition, the activity in periplasmic extracts and the specific activity increased 4- and 1.5-fold, respectively. Another mutant (BAA 29) possesses a wild-type-like pH profile but possesses a 40-fold higher activity in periplasmic extracts and a 9-fold higher specific activity. The comparison of the amino acid sequences of these two mutants with other homologous microbial alpha-amylases revealed the mutation of the highly conserved residues W194R, S197P, and A230V. In addition, three further mutations were found K406R, N414S, and E356D, the latter being present in other bacterial alpha-amylases.     

Probing structural determinants specifying high thermostability in Bacillus licheniformis alpha-amylase

Bacillus licheniformis alpha-amylase (BLA) is a starch-degrading enzyme that is highly thermostable although it is produced by a rather mesophilic organism. Over the last decade, the origin of BLA thermal properties has been extensively investigated in both academic and industrial laboratories, yet it is poorly understood. Here, we have used structure-based mutagenesis in order to probe the role of amino acid residues previously proposed as being important for BLA thermostability. Residues involved in salt-bridges, calcium binding or potential deamidation processes have been selected and replaced with various amino acids using a site-directed mutagenesis method, based on informational suppression. A total of 175 amylase variants were created and analysed in vitro. Active amylase variants were tested for thermostability by measuring residual activities after incubation at high temperature. Out of the 15 target residues, seven (Asp121, Asn126, Asp164, Asn192, Asp200, Asp204 and Ala269) were found to be particularly intolerant to any amino acid substitutions, some of which lead to very unstable mutant enzymes. By contrast, three asparagine residues (Asn172, Asn188 and Asn190) could be replaced with amino acid residues that significantly increase the thermostability compared to the wild-type enzyme. The highest stabilization event resulted from the substitution of phenylalanine in place of asparagine at position 190, leading to a sixfold increase of the enzyme's half-life at 80 degrees C (pH 5.6, 0.1 mM CaCl(2)).These results, combined with those of previous mutational analyses, show that the structural determinants contributing to the overall thermostability of BLA concentrate in domain B and at its interface with the central A domain. This region contains a triadic Ca-Na-Ca metal-binding site that appears extremely sensitive to any modification that may alter or reinforce the network of electrostatic interactions entrapping the metal ions. In particular, a loop spanning from residue 178 to 199, which undergoes pronounced conformational changes upon removal of calcium, appears to be the key feature for maintaining the enzyme structural integrity. Outside this region, most salt-bridges that were destroyed by mutations were found to be dispensable, except for an Asp121-Arg127 salt-bridge that contributes to the enhanced thermostability of BLA compared to other homologous bacterial alpha-amylases. Finally, our studies demonstrate that the natural resistance of BLA against high temperature is not optimized and can be enhanced further through various means, including the removal of possibly deamidating residues.     

Evidence regarding the hypothesis that the histidine-histidine contact pairs may affect protein stability

It has been lately proposed that the interaction between like-charged residues stabilizes the native state of proteins. To explore this, we created a histidine-histidine pair in the Ca-III binding site of the Bacillus amyloliquefaciens α-amylase (BAA) and then examined the impact of this pairing on the BAA. For this purpose, we used site-directed mutagenesis (SDM) to substitute Pro407 with His, Ala, Gln, Arg, and Glu in the BAA. Subsequently, thermostability, kinetic parameters and structural properties of these variants were measured. Moreover, His-His pairing effect on the BAA thermostability was examined by simultaneous mutation of two residues (P407H/H406A and P407H/H406N). The data exhibited a significant improve in thermostability and structural features of enzyme by His replacement instead of Pro407. Other substitutions in this site did not have a significant effect on the enzyme properties, except for P407R, which yielded a partial improvement. The results also showed that the thermostabilities of double mutants significantly decreased compared with that of the P407H mutant. Moreover, the thermostability of P407H remarkably increased compared with that of other variants even in the absence of Ca(2+). Our data clearly demonstrated that His406-His407 pairing was the major cause for improved thermal stability.     

Chemical modification of Bacillus thuringiensis subsp. thuringiensis (HD-524) trypsin-activated endotoxin: implication of tyrosine residues in lepidopteran cell lysis

A purified protein fraction from a solubilized and trypsin-digested extract of Bacillus thuringiensis subsp. thuringiensis (HD-524) fermentation powder was lytic to cells from several lepidopteran lines. Maximum yield was obtained by alkaline carbonate-thiocyanate solubilization of washed powder followed by trypsin digestion and Sephacryl (S-300) chromatography. The alkaline carbonate-solubilized fraction consisted predominantly of two bands on sodium dodecyl sulfate-polyacrylamide gel electrophoresis with MW of 144 +/- 0.9 kDa and 134 +/- 1.4 kDa. After trypsin treatment and column chromatography, the cytolytic fraction consisted of a major band with a MW of 60.0 +/- 1.8 kDa and a minor band of 69 +/- 0.9 kDa. Cells from Trichoplusia ni (TN368) were most susceptible to lysis with 50% of cells lysed at 3 micrograms/ml, followed by Spodoptera frugiperda cells (SF21AE) exhibiting 50% cell lysis at 5 micrograms/ml and Lymantria dispar cells (Ld652Y) showing 40% lysis at 10 micrograms/ml. Chemical modification of the polypeptides was performed to determine the role of certain amino acid residues in the cytolytic activity. The group-specific reagent tetranitromethane was used to nitrate and oxidize tyrosine and cysteine residues, respectively. Cysteine residues alone were also modified with p-hydroxymercuribenzoic acid. Lysine residues were modified with O-methylisourea. Of the three types of amino acid residues, only the modification of tyrosine resulted in reduced cell lysis.     

Improvement of the acid stability of Bacillus licheniformis alpha amylase by site-directed mutagenesis

The objective of this work was to improve the acid stability of alpha amylase from Bacillus licheniformis (BLA) under acidic conditions by site-directed mutagenesis. Based on the analysis of three dimensional structure of BLA, five histidine residues at positions 281, 289, 293, 316, and 327 in BLA were substituted by arginine residues and aspartic acid residues, respectively. Ten mutants H281R/D, H289R/D, H293R/D, H316R/D, and H327R/D were obtained and H293R, H316R, and H327R were active at pH 4.5 and 6.5. Triple mutations of BLA was modified for the construction of H293R/H316R/H327R. Compared with wild type, which lost the activity, H293R, H316R, H327R, and H293R/H316R/H327R could maintain 8, 10, 20, 31% of the initial activity when incubated at pH 4.5 and 70 °C for 40 min, respectively. The results combined with three-dimensional structure analysis demonstrated that H293R, H316R, H327R, and H293R/H316R/H327R showed an improved acid stability under low pH condition as a result of the interactions of electrostatic fields, hydrogen bonding, and hydrophilcity. This work provides the theoretical basis and background data on the improvement of acid stability in BLA for satisfying the industrial requirements by protein engineering, which is beneficial to molecular modification of other industrial enzymes for acid-tolerance ability.     

A stochastic model for predicting dextrose equivalent and saccharide composition during hydrolysis of starch by alpha-amylase

A stochastic model was developed that was used to describe the formation and breakdown of all saccharides involved during alpha-amylolytic starch hydrolysis in time. This model is based on the subsite maps found in literature for Bacillus amyloliquefaciens alpha-amylase (BAA) and Bacillus licheniformis alpha-amylase (BLA). Carbohydrate substrates were modeled in a relatively simple two-dimensional matrix. The predicted weight fractions of carbohydrates ranging from glucose to heptasaccharides and the predicted dextrose equivalent showed the same trend and order of magnitude as the corresponding experimental values. However, the absolute values were not the same. In case a well-defined substrate such as maltohexaose was used, comparable differences between the experimental and simulated data were observed indicating that the substrate model for starch does not cause these deviations. After changing the subsite map of BLA and the ratio between the time required for a productive and a non-productive attack for BAA, a better agreement between the model data and the experimental data was observed. Although the model input should be improved for more accurate predictions, the model can already be used to gain knowledge about the concentrations of all carbohydrates during hydrolysis with an alpha-amylase. In addition, this model also seems to be applicable to other depolymerase-based systems.     

Hydrolysis of soluble starch using Bacillus licheniformis alpha-amylase immobilized on superporous CELBEADS

In the present work, indigenously prepared rigid superporous (pore size of approximately 3 microm) cross-linked cellulose matrix (CELBEADS) has been used as a support for the immobilization of Bacillus licheniformis alpha-amylase (BLA). Optimum pH and temperature, and Michaelis-Menten constants were determined for both free and immobilized BLA. Immobilized BLA was observed to produce a different saccharide profile than free BLA at any value of dextrose equivalent. It was observed that pH, temperature, and initial starch concentration has a significant effect on the saccharide profile of starch hydrolysate produced using immobilized BLA in the batch mode, whereas the ratio of concentration of enzyme units to initial starch concentration has no influence on the same. Hence immobilized BLA can be used as an additional tool for production of maltodextrins with different saccharide profiles. Immobilized BLA has better thermostability than free BLA. Immobilized BLA was found to retain full activity even after eight batches of hydrolysis, each of 8h duration at 55 degrees C and 90 mg/mL initial starch concentration. A semiempirical model has been used for the prediction of saccharide composition of starch hydrolysate with respect to time.     

The presence of functional arginine residues in phosphoenolpyruvate carboxykinase from Saccharomyces cerevisiae

Saccharomyces cerevisiae phosphoenolpyruvate carboxykinase (ATP:oxaloacetate carboxy-lyase (transphosphorylating), EC 4.1.1.49) is completely inactivated by phenylglyoxal and 2,3-butanedione in borate buffer at pH 8.4, with pseudo-first-order kinetics and a second-order rate constant of 144 min-1 X M-1 and 21.6 min-1 X M-1, respectively. Phosphoenolpyruvate, ADP and Mn2+ (alone or in combination) protect the enzyme against inactivation, suggesting that the modification occurs at or near to the substrate-binding site. Almost complete restoration of activity was obtained when a sample of 2,3-butanedione-inactivated enzyme was freed of excess modifier and borate ions, suggesting that only arginyl groups are modified. The changes in the rate of inactivation in the presence of substrates and Mn2+ were used to determine the dissociation constants for enzyme-ligand complexes, and values of 23 +/- 3 microM, 168 +/- 44 microM and 244 +/- 54 microM were found for the dissociation constants for the enzyme-Mn2+, enzyme-ADP and enzyme-phosphoenolpyruvate complexes, respectively. Based on kinetic data, it is shown that 1 mol of reagent must combine per enzyme active unit in order to inactivate the enzyme. Complete inactivation of the carboxykinase can be correlated with the incorporation of 3-4 mol [7-14C]phenylglyoxal per mol of enzyme subunit. Assuming a stoichiometry of 1:1 between phenylglyoxal incorporation and arginine modification, our results suggest that the modification of only two of the three to four reactive arginine residues per phosphoenolpyruvate carboxykinase subunit is responsible for inactivation.