Input-Output Analysis of Waste Management

A new scheme of hybrid life-cycle assessment (LCA) termed the waste input-output (WIO) model is presented that ex-plicitly takes into account the interdependence between the flow of goods and waste. The WIO model has two distin-guishing features. First, it expands the Leontief environmental input-output (EIO) model with respect to waste flows. It turns out that the EIO model is a special case of the WIO model in which there is a strict one-to-one correspondence between waste types and treatment methods. By relaxing this condition, the WIO model provides a general framework for LCA of waste management. Second, the WIO model takes into account the "dynamics of waste treatment", which refers to the fact that the input-output relationships of waste treatment are significantly affected by the level and composition of waste feedstock, by incorporating an engineering process model of waste treatment. Because waste treatment is expected to accept whatever waste is generated by industry and households, a proper consideration of this feature is vital for LCA of waste management. We estimated a WIO table for Japan and applied it to evaluating effects of alternative waste management poli-cies with regard to regional concentration of incineration and the sorting of waste with regard to flammability. We found that concentrating treatment in a small number of large incin-erators combined with an increased degree of sorting could decrease both landfill consumption and the emission of carbon dioxide.     

广州市固体废物管理与处置现状及对策

分析广州市工业固体废物、危险废物、生活垃圾、余泥渣土等管理与处置现状,揭示广州市现有固体废物管理处置存在的主要问题,并提出对策建议。分析表明,近年广州市工业固体废物年产生量呈上升趋势,工业固体废物排放量有所回升;1999年危险废物实现零排放,医疗垃圾的集中处置率达100%;居民生活垃圾清运处置率达100%。生活垃圾分类收集率为26%,加快了垃圾填埋场的改造和建设;余泥渣土的管理逐步规范化,市区余泥渣土排放工地申领排放证率保持100%。存在问题包括管理上欠长远规划、处置技术落后、二次污染、资源回收率低、资金匮乏等,尤其缺乏对危险废物、废旧电池的集中处置机构。     

Estimation of Waste Battery Generation and Analysis of the Waste Battery Recycling System in China

China produces and consumes a large amount of batteries annually, which leads to many waste batteries needing to be recycled. The collection and recycling system of primary, alkaline secondary, and lithium‐ion secondary batteries in China is particularly poor, and waste battery recycling enterprises generally sustain economic losses if they solely use waste batteries as raw materials. Increasing the profits of waste battery recycling systems is a key problem that needs to be considered. This article quantitatively analyzes waste battery generation in China by using annual sales data and probable lifetime distribution of various batteries. The results show that the rapid growth of battery usage has led to an increased generation of waste batteries and the percentage of different types of waste batteries is changing over time. In 2013, the total quantity of all waste batteries in the medium lifetime scenario reached 570 kilotons, of which primary, alkaline secondary, and lithium‐ion secondary waste batteries accounted for approximately 36%, 28%, and 35%, respectively. Based on a real‐world case study of a typical domestic waste battery recycling enterprise in China, material flow analysis and cost‐benefit analysis were conducted to study the development of the recycling process of comingled waste batteries. Through scenario analysis, we conclude that increasing the use of waste batteries as raw materials and the recycling of other materials that are less valuable reduces the profits of the waste battery recycling enterprise. Higher profits can be achieved by adding the production of high value‐added downstream products and government support. At the same time, the essential role of the government in developing a waste battery recycling system was identified. Finally, relevant suggestions are made for improvements in both the government and enterprise sectors.     

Projection of Construction and Demolition Waste in Norway

Current waste generation from the construction and demolition industry (C&D industry) in Norway is about 1.25 million tonnes per year. This article presents a procedure for projection of future waste amounts by estimating the activity level in the C&D industry, determining specific waste generation factors related to this activity, and finally calculating projections on flows of waste materials leaving the stocks in use and moving into the waste management system. This is done through a simple model of stocks and flows of buildings and materials. Monte Carlo simulation is used in the calculations to account for uncertainties related to the input parameters in order to make the results more robust. The results show a significant increase in C&D waste for the years to come, especially for the large fractions of concrete/bricks and wood. These projections can be a valuable source of information to predict the future need for waste treatment capacity, the dominant waste fractions, and the challenges in future waste handling systems. The proposed method is used in a forthcoming companion article for eco-efficiency modeling within an evaluation of a C&D waste system.     

Saponification of fatty slaughterhouse wastes for enhancing anaerobic biodegradability

The thermochemical pretreatment by saponification of two kinds of fatty slaughterhouse waste – aeroflotation fats and flesh fats from animal carcasses – was studied in order to improve the waste’s anaerobic degradation. The effect of an easily biodegradable compound, ethanol, on raw waste biodegradation was also examined. The aims of the study were to enhance the methanisation of fatty waste and also to show a link between biodegradability and bio-availability. The anaerobic digestion of raw waste, saponified waste and waste with a co-substrate was carried out in batch mode under mesophilic and thermophilic conditions.     

Relation between substrate feeding pattern and development of filamentous bacteria in activated sludge processes: Part III. applications with industrial waste waters

Summary Laboratory scale activated sludge systems were operated under regimes of continuous or intermittent feeding of the waste water. Industrial waste waters from breweries, a dairy plant and a petro-chemical plant were investigated. The systems were started up with sludge from a municipal waste water plant or more often with sludges obtained from the corresponding industrial waste water treatment plants. It was found that intermittently fed systems produced sludges with better settleability characteristics than systems that were continuously supplemented with waste water. Our previous hypothesis that in intermittent systems floc forming bacteria become dominant as a result of higher substrate uptake rates was confirmed and may thus be extended to waste waters containing readily available substrates such as carbohydrates (brewery-and dairy waste water) or acids (petro-chemical waste water). Supplementation of brewery waste water with urea had a negative influence on sludge settleability, especially in continuously operated systems.     

Utilization of mustard waste isolates for improved production of astaxanthin by Xanthophyllomyces dendrorhous

Astaxanthin production in the wild strain Xanthophyllomyces dendrorhous TISTR 5730 was investigated using different mustard waste media, including mustard waste residue extract (MRE), mustard waste residue hydrolysate (MRH), mustard waste precipitated extract (MPE), and mustard waste precipitated hydrolysate (MPH). The growth of X. dendrorhous and the production of astaxanthin were dependent on the type and initial concentrations of mustard waste media. The MPH medium was the best substrate resulting in yields of biomass and astaxanthin of 19.6 g/L and 25.8 mg/L, respectively, under optimal conditions. MPH medium improved astaxanthin production 11-fold compared to the commonly used commercial yeast malt medium, and 1.3–2.1-fold compared to other mustard waste media.     

Anaerobic digestion of municipal solid waste and agricultural waste and the effect of co-digestion with dairy cow manure

Anaerobic digestion of dairy cow manure (CM), the organic fraction of municipal solid waste (OFMSW), and cotton gin waste (CGW) was investigated with a two-phase pilot-scale anaerobic digestion (AD) system. The OFMSW and CM were digested as single wastes and as combined wastes. The single waste digestion of CM resulted in 62m(3) methane/ton of CM on dry weight basis. The single waste digestion of OFMSW produced 37m(3) methane/ton of dry waste. Co-digestion of OFMSW and CM resulted in 172m(3) methane/ton of dry waste. Co-digestion of CGW and CM produced 87m(3) methane/ton of dry waste. Comparing the single waste digestions with co-digestion of combined wastes, it was shown that co-digestion resulted in higher methane gas yields. In addition, co-digestion of OFMSW and CM promotes synergistic effects resulting in higher mass conversion and lower weight and volume of digested residual.     

A survey of life cycle approaches in waste management

Background, aim, and scope  

Life-cycle thinking and life-cycle approaches are concepts that are getting increased attention worldwide and in particular in EU Policies related to sustainability. The European Commission is launching a number of activities to strengthen life-cycle thinking in policy and business. EU policies aim to decrease waste generation through new waste prevention initiatives, better use of resources and shift to more sustainable consumption patterns. The approach to waste management is based on three principles: waste prevention, recycling and reuse and improving the final disposal and monitoring. In particular, concerning the prevention and recycling of waste, the definition of a waste hierarchy should be the basis for the prioritisation of waste management options. The benefit of using Life Cycle Assessment (LCA) in analysing waste management systems is the provision of a comprehensive view of the processes and impacts involved. However, it is also clear that the studies will always be open for criticism as they are simplifications of reality. Moreover, in order to become the LCA, a leading tool within businesses and government to understand and manage risks or opportunities related to waste management and treatment technologies, there are methodological choices required and a number of aspects that still need to be worked out. It is therefore important to review open and grey literatures, EU guidelines, relevant environmental indicators and databases for the waste sector and data easily usable in waste policy decision-making, with an agreed approach and methodology based on life-cycle thinking. The following survey gathers and describes the existing guidelines and methodologies based on life-cycle thinking and applicable in waste policy decision-making.     

A life cycle assessment of residential waste management and prevention

Purpose

The oft-cited waste hierarchy is considered an important rule of thumb to identify preferential waste management options and places waste prevention at the top. Nevertheless, it has been claimed that waste prevention can sometimes be less favorable than recycling because (1) recycling decreases only the primary production of materials, whereas waste prevention may reduce a combination of both primary and low-impact secondary production, and (2) waste prevention decreases the quantity of material recycled downstream and the avoided impacts associated with recycling. In response to this claim, this study evaluates the life cycle effects of waste prevention activities (WPAs) on a residential waste management system.

Methods

This life cycle assessment (LCA) contrasts the net impacts of a large residential solid waste management system (including sanitary landfilling, anaerobic digestion, composting, and recycling) with a system that incorporates five WPAs, implemented at plausible levels (preventing a total of 3.6 % of waste generation tonnage) without diminishing product service consumption. WPAs addressed in this LCA reduce the collected tonnage of addressed advertising mail, disposable plastic shopping bags, newspapers, wine and spirit packaging, and yard waste (grass).

Results and discussion

In all cases, the WPAs reduce the net midpoint and endpoint level impacts of the residential waste management system. If WPAs are incorporated, the lower impacts from waste collection, transportation, sorting, and disposal as well as from the avoided upstream production of goods, more than compensate for the diminished net benefits associated with recycling and the displaced electricity from landfill gas utilization.

Conclusions

The results substantiate the uppermost placement of waste prevention within the waste hierarchy. Moreover, further environmental benefits from waste prevention can be realized by targeting WPAs at goods that will be landfilled and at those with low recycled content.     

Inactivation of poliovirus type 1 in mixed human and swine wastes and by bacteria from swine manure.

The persistence of poliovirus type 1 (PO1) in mixed septic tank effluent and swine manure slurry was determined, and the antiviral effects of several bacterial cultures isolated from swine manure slurry were demonstrated. In two field experiments, PO1 was consistently inactivated more rapidly in the mixed waste than in the control Dulbecco's phosphate-buffered saline (D-PBS). D values (time [in days] for a 90% reduction of virus titer) were 18.7 and 29.9 for the mixed waste and 56.5 and 51.8 for the D-PBS control, respectively. The virus inactivation in the mixed waste was temperature dependent. A comparison of PO1 inactivation in raw mixed waste, autoclaved mixed waste, and bacterium-free filtrate of raw mixed waste at the same pH and temperatures provided an initial demonstration that the virus inactivation in the mixed waste is related, at least in part, to microbial activity. At 25 degrees C, the D value was 6.8 for the mixed waste, 11.2 for the autoclaved mixed waste, and 10.5 for the bacterium-free filtrate of raw mixed waste. At 37 degrees C, D values were 1.3, 3.9, and 3.1 for these three suspending media, respectively. Three bacterial isolates which had shown antiviral effects in a screening test each caused virus inactivation in autoclaved mixed waste, in which the effect of other microorganisms was excluded. Inhibition of PO1 inactivation by protease inhibitors suggests that the virus inactivation in the mixed waste was due in part to proteolytic enzymes produced by bacteria in the waste.     

Application of waste activated bleaching earth containing rapeseed oil on riboflavin production in the culture of Ashbya gossypii

Waste activated bleaching earth (ABE) that contained 40% rapeseed oil and was discharged by an oil refinery plant, was used for riboflavin production in a culture of Ashbya gossypii. When 125 g/L waste ABE that contained 50 g/L rapeseed oil was added into the culture, the riboflavin concentration was 1.12 g/L, which was almost 1.6-fold as high as that of pure rapeseed oil. However, in waste ABE concentration higher than 125 g/L, the produced riboflavin concentration decreased, which was due to the difficulty in mixing due to the presence of a high amount of solid material in the culture. The surface of the waste ABE was smooth without a hitch, because of being covered with rapeseed oil. However, after the culture, the surface of the waste ABE seemed like that of new one, and the oil content was nearly zero grams per liter. The waste ABE, oily clay, and its black color gradually fade and yellow little by little, and finally the waste ABE changed to yellow powder. Of the riboflavin produced during the culture, 70% was adsorbed in the oil free waste ABE. With diluted alkali solution, extraction only two times yielded 90% recovery of riboflavin adsorbed in the waste ABE. The waste ABE containing waste vegetable oil was suitable for raw material for production of the value-added useful bioproducts, which might be a good model for reuse of the waste resource.     

Increased levels of markers of microbial exposure in homes with indoor storage of organic household waste

As part of environmental management policies in Europe, separate collection of organic household waste and nonorganic household waste has become increasingly common. As waste is often stored indoors, this policy might increase microbial exposure in the home environment. In this study we evaluated the association between indoor storage of organic waste and levels of microbial agents in house dust. The levels of bacterial endotoxins, mold beta(1-->3)-glucans, and fungal extracellular polysaccharides (EPS) of Aspergillus and Penicillium species were determined in house dust extracts as markers of microbial exposure. House dust samples were collected in 99 homes in The Netherlands selected on the basis of whether separated organic waste was present in the house. In homes in which separated organic waste was stored indoors for 1 week or more the levels of endotoxin, EPS, and glucan were 3.2-, 7.6-, and 4. 6-fold higher, respectively (all P < 0.05), on both living room and kitchen floors than the levels in homes in which only nonorganic residual waste was stored indoors. Increased levels of endotoxin and EPS were observed, 2.6- and 2.1-fold (P < 0.1), respectively, when separated organic waste was stored indoors for 1 week or less, whereas storage of nonseparated waste indoors had no effect on microbial agent levels (P > 0.2). The presence of textile floor covering was another major determinant of microbial levels (P < 0.05). Our results indicate that increased microbial contaminant levels in homes are associated with indoor storage of separated organic waste. These increased levels might increase the risk of bioaerosol-related respiratory symptoms in susceptible people.     

Inactivation of poliovirus type 1 in mixed human and swine wastes and by bacteria from swine manure.

The persistence of poliovirus type 1 (PO1) in mixed septic tank effluent and swine manure slurry was determined, and the antiviral effects of several bacterial cultures isolated from swine manure slurry were demonstrated. In two field experiments, PO1 was consistently inactivated more rapidly in the mixed waste than in the control Dulbecco's phosphate-buffered saline (D-PBS). D values (time [in days] for a 90% reduction of virus titer) were 18.7 and 29.9 for the mixed waste and 56.5 and 51.8 for the D-PBS control, respectively. The virus inactivation in the mixed waste was temperature dependent. A comparison of PO1 inactivation in raw mixed waste, autoclaved mixed waste, and bacterium-free filtrate of raw mixed waste at the same pH and temperatures provided an initial demonstration that the virus inactivation in the mixed waste is related, at least in part, to microbial activity. At 25 degrees C, the D value was 6.8 for the mixed waste, 11.2 for the autoclaved mixed waste, and 10.5 for the bacterium-free filtrate of raw mixed waste. At 37 degrees C, D values were 1.3, 3.9, and 3.1 for these three suspending media, respectively. Three bacterial isolates which had shown antiviral effects in a screening test each caused virus inactivation in autoclaved mixed waste, in which the effect of other microorganisms was excluded. Inhibition of PO1 inactivation by protease inhibitors suggests that the virus inactivation in the mixed waste was due in part to proteolytic enzymes produced by bacteria in the waste.     

Generation of Domestic Solid Waste in Rural Areas: Case Study of Remote Communities in the Brazilian Amazon

The Brazilian rural population is estimated to be around 30 million people and many rural areas do not have universal access to basic infrastructure services, including those related to solid waste. There are very few scientific studies on rural domestic solid waste and more investigative work is needed to provide information for appropriate solid waste management policies. This paper aims to characterize rural domestic solid waste in terms of quantity and quality. Amazonian rural communities were chosen for our case study. The issue of domestic solid waste was characterized both by means of interviews, at household level, and by a study of industrialized products traded in the communities located along the banks of the Juruá River, in the Brazilian Amazon. Quantitative results have shown that generation of solid waste in these rural communities reaches 0.5 kg/person/day. Organic matter represents 90 % of domestic solid waste generation and is mainly reused to feed animals and/or is composted using a method called paú. Inorganic solid waste (10 %) is either reused, burned or inadequately dumped in open sites. Based on these data, the annual production of solid waste is 437 tons per year in these communities. Since infrastructure services are virtually non-existent in this rural context, even this amount of solid waste may have a serious environmental impact, with negative effects on the population’s health, particularly in terms of hazardous waste. Even though solid waste management solutions for rural populations might not always be based on economic efficiency, decision makers responsible for development and planning should present solutions that are socially, technologically, environmentally and economically suitable for this context.     

Key indicators for assessing the effectiveness of waste management in construction projects

Effective construction and demolition (C&D) waste management is indispensable to the attainment of sustainable construction. Many endeavors so far have been made to assess C&D waste management. However, the majority of efforts have been attempted to investigate C&D waste management from an economic point of view, while very few studies have been focused on the environmental and social aspects, which are imperative to promote effective C&D waste management. This paper identifies 30 key indicators affecting the overall effectiveness of C&D waste management from a holistic perspective and develops a C&D waste management effectiveness assessment framework by integrating the key indicators identified. The assessment framework not only deepens understanding of effectiveness of C&D waste management, but also provides a concrete base for future research in assessing the effectiveness of C&D waste management quantitatively.     

抑制浓度下锰铁对啤酒废酵母产LYCD活力影响

目的:探讨锰铁离子对啤酒废酵母产生活性酵母细胞衍生物(LYCD)的活力影响.方法:以啤涌废酵母为研究对象、以废液为培养基,在生长抑制浓度下,分别研究了锰、铁离子的作用浓度与时间对啤酒废酵母产生LYCD的活力影响.结果:废酵母在废液中培养28h可达到对数生长期;当废液中Mn~(2+)、Fe~(3+)浓度分别达到200mg/L、50mg/L时可对废酵母产生生长抑制;当Mn~(2+)、Fe~(3+)的作用浓度分别为220mg/L、60mg/L、应激时间分别是25、45min时,啤酒废酵母产的LYCD活性强.结论:应激培养基中金属离子Mn~(2+)、Fe~(3+)达到一定浓度,在一定时间下可使废酵母产生强活力的LYCD.     

Bioconversion of garden waste,kitchen waste and cow dung into value-added products using earthworm Eisenia fetida

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization and changes in our life style. Transformation of industrial sludges into vermicompost is of double interest: on the one hand, a waste is converted into value added product, and, on the other, it controls a pollutant that is a consequence of increasing industrialization. Garden waste, kitchen waste and cow dung were subjected to recycle through vermicomposting by using the epigeic earthworm Eisenia fetida under field conditions. The pH, moisture content, total organic carbon, humus, nitrogen, phosphorous and potassium in vermicompost was analysed. It was found that moisture content, total organic carbon, humus, nitrogen, phosphorous and potassium was high in cow dung, followed by kitchen waste and garden waste. This study clearly indicates that vermicomposting of garden waste, kitchen waste and cow dung can not only produce a value added produce (vermicomposting) but at the same time reduce the quantity of waste.     

Assessing non-hazardous solid waste business characteristics of Western Canadian provinces

This study addresses a gap that exists in studying waste business characteristics and the performance of a waste management system (WMS). Temporal and spatial analyses of the WMS in four Western Canadian provinces are systematically assessed over a 16-year period. The average waste business size in Canada ranged from 13.4 to 22.1 employees per business. Jurisdictions with lower disposal rates generally have larger waste companies. An average employee handled 1098 to 1426 t of waste annually. The diversion rates tended to be higher when less waste is managed per employee, suggesting total employee count may be important to improve WMS sustainability in Canada. Waste transfer costs are substantial during the study period, totaled $1276 million annually, or about 40.7% of the total government waste spending. BC only spent an average of 2.5% of the budget on operation of recycling facilities, but has the highest waste diversion rate. Expenditure distribution alone is unable to explain BC's superior waste diversion performance. Capital expenditures have been increasing from $15.7/t to $26.2/t. In this study, a business with more full-time employees correlates well with higher operating revenues. Part time workers were more predominant in SK, and may be responsible for the subpar diversion rate and operating revenue. More research is needed to determine waste business characteristics given increasing interest in circular economy and WMS efficiency.     

荧光光谱分析法在地沟油鉴别中的应用研究

由于地沟油的成分含量复杂性和不定量性,导致了现有的单一检测方法不能同时满足快速和准确的辨认。荧光光谱具有高灵敏度和分辨率的特性,由此提出了一种利用荧光光谱快速检测食用油中是否掺有地沟油的新方法。将花生油分成7组,每组油所含的地沟油的比例不同,用220 nm到800 nm的激发和发射光检测各组样品油,收集其荧光数据后做归一化处理进行分析。在荧光实验中,特别是在365 nm和720 nm激发波长波段和434 nm发射波长波段,样品油的荧光强度与所含地沟油的体积分数大小明显成反比,当地沟油的体积分数大于5%时,荧光强度的衰减更为明显。结果证明了荧光光谱法检测地沟油的可行性,而且步骤更为简单。利用荧光光谱的非接触和高灵敏度的优势,能够更为简便地检测到加入了5%以上地沟油的花生油。