An electrochemical biosensor for analysis of Fenton-mediated oxidative damage to BSA using poly-o-phenylenediamine as electroactive probe

A sensitive electrochemical procedure based on bovine serum albumin (BSA)/poly-o-phenylenediamine (PoPD)/carbon-coated nickel (C-Ni) nanobiocomposite film modified glassy carbon electrode (BSA/PoPD/C-Ni/GCE) has been developed to explore the electrochemical detection of BSA damage induced by hydroxyl radical. It is the first time that the electrochemical method has been applied for the analysis of Fenton-mediated oxidative damage to proteins. The hydroxyl radical was generated by Fenton reaction (Fe(2+)/H(2)O(2)), which was also validated by ultraviolet-visible (UV-vis) spectroscopy. The decrease in intensity of the PoPD oxidation signals was used as an indicator for the detection of BSA damage. Damage to BSA was also validated by horizontal Attenuation Total Reflection Fourier Transform Infra-red (ATR-FTIR) spectroscopy and the change of protein carbonyl group content achieved by UV-vis spectroscopy. Effects of H(2)O(2) concentration, the ratio of Fe(2+) and H(2)O(2) and incubation time on BSA damage were examined. Protections of BSA from damage by antioxidants were also investigated. These conclusions demonstrated that the proposed electrochemical method is expected to the further application for protein damage studies.     

Molecular imprinted nanoelectrodes for ultra sensitive detection of ovarian cancer marker

The relentless discovery of cancer biomarkers demands improved methods for their detection. In this work, we developed protein imprinted polymer on three-dimensional gold nanoelectrode ensemble (GNEE) to detect epithelial ovarian cancer antigen-125 (CA 125), a protein biomarker associated with ovarian cancer. CA 125 is the standard tumor marker used to follow women during or after treatment for epithelial ovarian cancer. The template protein CA 125 was initially incorporated into the thin-film coating and, upon extraction of protein from the accessible surfaces on the thin film, imprints for CA 125 were formed. The fabrication and analysis of the CA 125 imprinted GNEE was done by using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques. The surfaces of the very thin, protein imprinted sites on GNEE are utilized for immunospecific capture of CA 125 molecules, and the mass of bound on the electrode surface can be detected as a reduction in the faradic current from the redox marker. Under optimal conditions, the developed sensor showed good increments at the studied concentration range of 0.5-400 U mL(-1). The lowest detection limit was found to be 0.5 U mL(-1). Spiked human blood serum and unknown real serum samples were analyzed. The presence of non-specific proteins in the serum did not significantly affect the sensitivity of our assay. Molecular imprinting using synthetic polymers and nanomaterials provides an alternative approach to the trace detection of biomarker proteins.     

A novel immunosensor based on an alternate strategy of electrodeposition and self-assembly

An imprinted electrochemical sensor based on polypyrrole-sulfonated graphene (PPy-SG)/hyaluronic acid-multiwalled carbon nanotubes (HA-MWCNTs) for sensitive detection of tryptamine was presented. Molecularly imprinted polymers (MIPs) were synthesized by electropolymerization using tryptamine as the template, and para-aminobenzoic acid (pABA) as the monomer. The surface feature of the modified electrode was characterized by cyclic voltammetry (CV). The proposed sensor was tested by chronoamperometry. Several important parameters controlling the performance of the molecularly imprinted sensor were investigated and optimized. The results showed that the PPy-SG composites films showed improved conductivity and electrochemical performances. HA-MWCNTs bionanocomposites could enhance the current response evidently. The good selectivity of the sensor allowed three discriminations of tryptamine from interferents, which include tyramine, dopamine and tryptophan. Under the optimal conditions, a linear ranging from 9.0×10(-8) mol L(-1) to 7.0×10(-5) mol L(-1) for the detection of tryptamine was observed with the detection limit of 7.4×10(-8) mol L(-1) (S/N=3). This imprinted electrochemical sensor was successfully employed to detect tryptamine in real samples.     

Highly sensitive electrochemical aptasensor for immunoglobulin E detection based on sandwich assay using enzyme-linked aptamer

Here, we describe the fabrication of an electrochemical immunoglobulin E (IgE) aptasensor using enzyme-linked aptamer in the sandwich assay method and thionine as redox probe. In this protocol, 5′-amine-terminated IgE aptamer and thionine were covalently attached on glassy carbon electrode modified with carbon nanotubes/ionic liquid/chitosan nanocomposite. Furthermore, another IgE aptamer was modified with biotin and enzyme horseradish peroxidase (HRP), which attached to the aptamer via biotin–streptavidin interaction. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry were performed at each stage of the chemical modification process to confirm the resulting surface changes. The presence of IgE induces the formation of a double aptamer sandwich structure on the electrode, and the electrocatalytic reduction current of thionine in the presence of hydrogen peroxide was measured as the sensor response. Under optimized conditions and using differential pulse voltammetry as the measuring technique, the proposed aptasensor showed a low detection limit (6 pM) and high sensitivity (1.88 μA nM⁻¹). This aptasensor also exhibited good stability and high selectivity for IgE detection without an interfering effect of some other proteins such as bovine serum albumin (BSA) and lysozyme. The application of the aptasensor for IgE detection in human serum sample was also investigated. The proposed protocol is quite promising as an alternative sandwich approach for various protein assays.     

One-step electrochemically co-assembled redox-active [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid film for non-redox protein biosensors

A redox-active [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs (bpy=2,2'-bipyridine, tatp=1,4,8,9-tetra-aza-triphenylene, BSA=bovine serum albumin, SWCNTs=single-walled carbon nanotubes) hybrid film is fabricated on an indium-tin oxide (ITO) electrode via one-step electrochemical co-assembly approach. BSA is inherently dispersive and therefore served as the linking mediator of SWCNTs, which facilitate the redox reactions of [Ru(bpy)(2)(tatp)](2+) employed as a reporter of BSA. The evidences from differential pulse voltammetry, cyclic voltammetry, scanning electron microscope, emission spectroscopy and fluorescence microscope reveal that the [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid can be electrochemically co-assembled on the ITO electrode, showing two pairs of well-defined Ru(II)-based redox waves. Furthermore, the electrochemical co-assembly of the [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid is found to be strongly dependent on the simultaneous presence of BSA and SWCNTs, indicating a good linear response to BSA in the range from 6 to 50mgL(-1). The results from this study provide an electrochemical co-assembly method for the development of non-redox protein biosensors.     

Amperometric detection of bilirubin from a micro-sensing electrode with a synthetic bilirubin imprinted poly(MAA-co-EGDMA) film

Poly(methacrylic acid-co-ethyl glycol dimethylacrylate) (poly(MAA-co-EGDMA)) imprinted with alpha-bilirubin was shown to be able to bind alpha-bilirubin in our previous work. In this work, the corresponding imprinted polymer thin film was synthesized onto a thiol treated Au electrode by surface grafting polymerization. Bilirubin was able to be detected by an Au electrode, however, the electrode was not be able to discriminate bilirubin from the other matrix components if clinical samples were used. Therefore, the imprinted material was introduced so that the modified Au electrode could specifically detect bilirubin. Optimal potential was found to be 0.55 V and this was set for the rest of experiments. The imprinting factor of 3.16 was confirmed by comparing the signals from the MIP-Au and the NIP (non-imprinted polymer)-Au electrode. Calibration of the bilirubin concentration with respect to the current by the MIP-Au electrode was made within the range of 5mg/dl and a detection sensitivity of 0.644 microA/mg/dl (2.58 microA/cm(2)/mg/dl) was obtained. Furthermore, a linear correlation of the bilirubin concentration within 1.0mg/dl versus detection current was also achieved. Bilirubin was further detected by the MIP-Au electrode in the presence of fetal bovine serum (FBS). Repeated detection of bilirubin with at least three detection batches was performed and the reproducibility of the same piece of MIP-Au electrode was confirmed. The result was compared to those obtained from the serum and the solvent solution. The results indicated the feasibility of using the bilirubin imprinted poly(MAA-co-EGDMA) film as a sensing electrode for the clinical detection of bilirubin in serum.     

Quantitative electrochemiluminescence detection of proteins: Avidin-based sensor and tris(2,2'-bipyridine) ruthenium(II) label

Quantitative electrochemiluminescence (ECL) detection of a model protein, bovine serum albumin (BSA) was achieved via biotin–avidin interaction using an avidin-based sensor and a well-developed ECL system of tris(2,2′-bipyridine) ruthenium(II) derivative as label and tri-n-propylamine (TPA) as coreactant. To detect the protein, avidin was linked to the glassy carbon electrode through passive adsorptions and covalent interaction with carboxylate-terminated carbon nanotubes that was used as binder to immobilize avidin onto the electrode. Then, biotinylated BSA tagged with tris(2,2′-bipyridine) ruthenium(II) label was attached to the prepared avidin surface. After binding of BSA labeled with tris(2,2′-bipyridine) ruthenium(II) derivative to the surface-immobilized avidin through biotin, ECL response was generated when the self-assembled modified electrode was immersed in a TPA-containing electrolyte solution. Such double protein labeling protocol with a biotin label for biorecognition and ruthenium label for ECL detection facilitated the detection of protein compared to the classical double antibody sandwich format. The ECL intensity was linearly proportional to the feed concentration of BSA over two orders of magnitude in the range of 15 nM to 7.5 μM. The detection limit was estimated to be 1.5 nM. Further application to the lysozyme analysis was carried out to validate the present approach for an effective and favorable protocol for the quantitative detection of proteins. The dynamic range of lysozyme was from 0.001 g L⁻¹ to 0.1 g L⁻¹ and the detection limit was 0.1 mg L⁻¹. Electrochemical impedance and cyclic voltammetric measurements along with some necessary control experiments were conducted to characterize the successful formation of self-assembled modified electrodes and to grant the whole detection process.     

Interaction of vitamin B1 with bovine serum albumin investigation using vitamin B1-selective electrode: potentiometric and molecular modeling study

Vitamin B₁ or thiamin is one of the B vitamins. All B vitamins help the body to convert food (carbohydrates) into fuel (glucose), which produces energy. The B vitamins are necessary for healthy skin, eyes, hair, and liver. It also could help the nervous system function properly, and is necessary for brain functions. Drug interactions with protein can affect the distribution of the drug and eliminate the drug in living systems. In this study, the binding of thiamine hydrochloride (vitamin B₁) to bovine serum albumin (BSA) was evaluated using a new proposed vitamin B₁ (thiamine)-selective membrane electrode under various experimental conditions, such as pH, ionic strength, and protein concentration; in addition molecular modeling was applied as well. The binding isotherms plotted based on potentiometric data and analyzed using the Wyman binding potential concept. The apparent binding constant was determined and used for the calculation of intrinsic Gibbs free energy of binding. According to the electrochemical and molecular docking results, it can be concluded that the hydrophobic interactions and hydrogen binding are major interactions between BSA and vitamin B₁.     

Polyaniline protected gold nanoparticles based mediator and label free electrochemical cortisol biosensor

Polyaniline protected gold nanoparticles (PPAuNPs) were electrophoretically deposited onto a gold electrode, and utilized to fabricate an electrochemical cortisol biosensor. Cortisol specific monoclonal antibody (C-Mab) was covalently immobilized onto the surface of a PPAuNP/Au electrode using N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide (EDC/NHS) chemistry. BSA was employed for blocking nonspecific adsorption on the electrode surface. PPAuNP formation and BSA/C-Mab/PPAuNP/Au electrode fabrication were characterized using transmission electron microscopy, atomic force microscopy and electrochemical impedance techniques, respectively. Cyclic voltammetry and differential pulse voltammetric techniques were used to determine the cortisol concentration in a phosphate buffer saline (PBS) solution. Results confirmed that the PPAuNP based electrode was stable during repeated scans and exhibited repeatable redox peaks. Further, the BSA/C-Mab/PPAuNP/Au electrode in the PBS buffer accurately detected cortisol in the range of 1 pM-100 nM with a sensitivity of 1.63 μAM(-1). The biosensor was found to be selective against BSA and 17-α-hydroxy progesterone. This research establishes the feasibility of using a PPAuNP based matrix for a label and mediator free electrochemical biosensor for cortisol, a stress biomarker.     

Molecular imprinting of proteins and other macromolecules resulting in new adsorbents

When the model protein bovine serum albumin (BSA) was dissolved in a concentrated aqueous solution of the multifunctional ligand L-malic acid, the solution was lyophilized, and the solid residue thoroughly washed with tetrahydrofuran to extract malic acid, then the resultant ("imprinted") protein was capable of binding 26.4 +/-0.9 mol equivalents of the ligand in anhydrous ethyl acetate. The nonimprinted BSA (i.e., that prepared in the same manner apart from the absence of malic acid) bound less then one-tenth of that amount under identical conditions. Furthermore, both imprinted and nonimprinted BSA exhibited little binding of L-malic acid in water. The imprinted BSA retained its "memory" for the ligand in ethyl acetate even after a prolonged incubation under vacuum; dissolution in water, however, eliminated the imprinted protein's binding capacity. The BSA imprinted with L-malic acid displayed affinity for this ligand not only in ethyl acetate but also in many other anhydrous solvents. It was found that the higher the solvent's propensity to form hydrogen bonds, the lower the protein-ligand binding in it, thus pointing to hydrogen bonds as the driving force of this binding. Studies with completely or partially cleaved BSA, with other globular proteins, glutathione, and poly(L-aspartic acid) revealed that the critical requirement for the imprintability is the presence of a sufficiently long polymeric chain. Moreover, many hydrogen-bond-forming macromolecules other than proteins, such as dextrans and their derivatives, partially hydrolyzed starch, and poly(methacrylic acid), also could be imprinted for subsequent binding in ethyl acetate. The mechanism of imprinting and binding inferred from these experiments involves a multipoint hydrogen bonding in water of each ligand molecule with two or more sites on the polymeric chain, thereby folding a segment of the latter into a cavity around the ligand; following lyophilization and extraction of the ligand, the cavities remain in organic solvents (but not in water) and give rise to ligand binding. This conclusion is supported by the results of binding of numerous malic acid analogs and related ligands to BSA imprinted with L-malic acid. Finally, BSA imprinted with malic acid was used as a selective adsorbent for a chromatographic separation of an equimolar mixture of maleic and acrylic acids in ethyl acetate.     

Amperometric and impedimetric characterization of a glutamate biosensor based on Nafion and a methyl viologen modified glassy carbon electrode

An electrochemical biosensor based on a glassy carbon (GC) electrode chemically modified with the perfluorinated cation-exchange polymer Nafion and methyl viologen (MV) is described. The enzyme was immobilized by cross-linking with glutaraldehyde in the presence of bovine serum albumin (BSA), methyl viologen and Nafion. Operating variables such as the enzyme/BSA ratio, cross-linking time in glutaraldehyde vapor, methyl viologen and Nafion percentages were investigated with regard to their influence on the biosensor sensitivity by using glucose oxidase as the enzyme model due to its high stability and low cost. The glutamate biosensor was elaborated by using optimized parameters and its electrochemical properties were investigated by cyclic voltammetry, amperometry and by electrochemical impedance spectroscopy. The glutamate biosensor shows a detection limit of 20 microM and a linear range extended to 0.75 mM. Its selectivity was tested with 15 different amino acids, each with a concentration of 20 microM, 25 microM acetaminophen, 20 microM uric acid and 200 microM ascorbic acid. No amperometric response was observed for the interfering species. This good selectivity allows glutamate detection in biological media without previous separation of the analyte.     

Determination of trace 2,4-dinitrophenol in surface water samples based on hydrophilic molecularly imprinted polymers/nickel fiber electrode

A rapid, sensitive and selective electrochemical method was proposed for the determination of 2,4-dinitrophenol (2,4-DNP) in surface water samples, using hydrophilic molecular imprinted polymers (MIPs) as the recognition element and nickel (Ni) fiber as the catalytic element. Hydrophilic MIPs were synthesized using 2,4-DNP as the template, acrylamide as the monomer, glycidilmethacrylate as the pro-hydrophilic co-monomer and acetonitrile as the solvent. Hydrophilic modification could enhance the accessibility of 2,4-DNP to the imprinted cavities and improve the selective recognition properties of traditional MIPs in water medium. Subsequently, hydrophilic MIPs/Ni fiber electrode was prepared to determine trace 2,4-DNP by cyclic voltammetry. The parameters affecting the analytical performance were investigated. Under optimized conditions, the linear range was 0.7-30 μg L?1 and the detection limit was 0.1 μg L?1. Finally, the proposed method was applied to measure 2,4-DNP in surface water samples. The spiked recoveries were changed from 91.3% to 102.6% and the RSD was not higher than 5.1%. There was no statistically significant difference between the results obtained by the proposed method and the traditional chromatographic method.     

Determination of endotoxin through an aptamer-based impedance biosensor

Lipopolysaccharide (LPS) often referred to endotoxin is an undesirable impurity frequently entrained with various recombinant protein therapeutics and plasmid DNA (pDNA) vaccines of bacterial origin. The inherent toxicities (e.g. fever, hypotension, shock and death) of LPS render its early and sensitive detection essential for several biological assays and/or parenteral administrations of biotherapeutics. In this study, an electrochemical biosensor using an LPS specific single stranded DNA (ssDNA) aptamer as a probe was developed. Amine-terminated aptamer exhibiting high affinity (K(d)=11.9 nM) to LPS was immobilized on a gold electrode using 3-mercaptopropionic acid (MPA) as a linker. Each step of the modification process was characterized by cyclic voltammetry (CV) and electrochemical impendence spectroscopy (EIS). A good linear relationship of the changes in the charge-transfer resistance (ΔR(et)) and the logarithmic value of LPS concentration was demonstrated in a broad dynamic detection range of 0.001-1 ng/ml. Furthermore, the aptasensor showed a high selectivity to LPS despite the presence of pDNA, RNA and bovine serum albumin (BSA) and could be regenerated in low pH condition, offering a promising option for detecting LPS often present in a complex milieu.     

Label-free electrochemical aptasensor for thrombin detection with platinum nanoparticles and blocking reagent horseradish peroxidase as enhancers

A sensitive label-free electrochemical aptasensor was successfully fabricated for thrombin detection with platinum nanoparticles (Pt) and blocking reagent horseradish peroxidase (HRP) as enhancers. A Nafion?-graphene-coated electrode was first modified with an electrochemical probe of methylene blue (MB) through electrostatic interaction. Then Pt was electrodeposited onto an electrode for immobilization of the thrombin aptamer (TBA). Subsequently, HRP served as blocking reagent instead of bovine serum albumin (BSA). With the synergistic effect between Pt and HRP, the prepared aptasensor showed a superior catalytic efficiency toward H(2) O(2) in the presence of MB. After the combination of target thrombin on electrode surface, the TBA-thrombin complex made a barrier for electrocatalysis of Pt and HRP and inhibited the electrotransfer, resulting in a greater decrease in MB signals. As a result, the proposed approach showed a high sensitivity and a much wider linearity to thrombin in the range from 0.005 to 50 nM with a detection limit of 1 pM.     

A nanoparticle label/immunochromatographic electrochemical biosensor for rapid and sensitive detection of prostate-specific antigen

We present a nanoparticle (NP) label/immunochromatographic electrochemical biosensor (IEB) for rapid and sensitive detection of prostate-specific antigen (PSA) in human serum. This IEB integrates the immunochromatographic strip with the electrochemical detector for transducing quantitative signals. The NP label, made of CdSe@ZnS, serves as a signal-amplifier vehicle. A sandwich immunoreaction was performed on the immunochromatographic strip. The captured NP labels in the test zone were determined by highly sensitive stripping voltammetric measurement of the dissolved metallic component (cadmium) with a disposable-screen-printed electrode, which is embedded underneath the membrane of the test zone. Several experimental parameters (e.g., immunoreaction time, the amount of anti-PSA-NP conjugations applied) and electrochemical detection conditions (e.g., preconcentration potential and time) were optimized using this biosensor for PSA detection. The analytical performance of this biosensor was evaluated with serum PSA samples according to the “figure-of-merits” (e.g., dynamic range, reproducibility, and detection limit). The results were validated with enzyme-linked immunosorbent assay (ELISA) and showed high consistency. It is found that this biosensor is very sensitive with the detection limit of 0.02 ng mL⁻¹ PSA and is quite reproducible (with a relative standard deviation (R.S.D.) of 6.4%). This method is rapid, clinically practical, and less expensive than other diagnostic tools for PSA; therefore, this IEB coupled with a portable electrochemical analyzer shows great promise for simple, sensitive, quantitative point-of-care testing of disease-related protein biomarkers.     

Investigation of dual-layer membrane cloaking method by surface plasmon resonance for direct chronoamperometric immunoassay of serum sample

A "dual-layer membrane cloaking" (DLMC) method was developed to construct disposable electrochemical immunosensor for direct determination of serum sample. Mouse IgG (MIgG) molecules were firstly immobilized on a substrate. After the formation of a didodecyldimethylammonium bromide (DDAB) membrane on the MIgG modified substrate, an additional bovine serum albumin (BSA) thin layer was formed to build a BSA/DDAB dual-layer membrane (DLM). When alkaline phosphatase conjugated anti-mouse IgG antibodies (anti-MIgG-ALP) in human serum were incubated on the substrate, anti-MIgG-ALP was recognized specifically by the immobilized MIgG while all nonspecifically adsorbed proteins were selectively removed together with BSA/DDAB DLM by 5% Triton X-100 (v/v) before final measurements. The BSA/DDAB DLM was characterized and optimized by surface plasmon resonance (SPR) technique, and further employed in a disposable immunoassay based on an ITO chip. Under optimal conditions, MIgG in human serum was directly detected in the range of 2.0-18.0 ng mL(-1) without dilution or separation. A limit of detection as low as 0.922 ng mL(-1) (6.15 pM) was obtained. The proposed DLMC method can efficiently prevent the penetration of matrix proteins through single cloaking membrane and completely eliminate nonspecific adsorption. It has great potential in providing a versatile way for direct determination of serum sample with ultra-sensitivity.     

An electrochemical immunosensor to minimize the nonspecific adsorption and to improve sensitivity of protein assays in human serum

An electrochemical immunoassay which minimizes nonspecific protein adsorption and improves detection sensitivity of proteomic cancer biomarker is described. Our technique comprises two novel features: (i) a high density terminally functionalized poly(N-isopropyl acrylamide) 'brush' layer is grown by surface initiated reversible addition fragmentation chain transfer (RAFT) polymerization method from the electrode surface in order to minimize nonspecific adsorption of serum proteins and other biomolecules, and (ii) a signal amplifying 'bionanoconjugate' comprised of graphene oxide nanosheets decorated with CdSe quantum dots and recombinant single-chain variable fragments towards MSLN, is used to 'physically' amplify the anodic stripping voltammetric signal. This method enabled a detection limit of ca. 1pg/mL MSLN (RSD=4.6%, n=4) spiked in serum samples. Because of the simple, specific and sensitive nature of this methodology, we feel that it may find potential use in serum-based protein diagnostics.     

Molecularly imprinted thin film self-assembled on piezoelectric quartz crystal surface by the sol-gel process for protein recognition

A novel method of combining sol-gel and self-assembly technology to prepare a human serum albumin (HSA)-imprinted film on the surface of piezoelectric quartz crystal (PQC) Au-electrode modified with thioglycolic acid was described in this paper. The imprinting process was characterized by using the piezoelectric quartz crystal impedance (PQCI) technique and electrochemical impedance technique. Scanning electron microscope (SEM) was employed to characterize the surface morphology of the resultant imprinted film. The piezoelectric technique and electrochemical impedance technique were also employed to investigate the binding performance of the sol-gel-imprinted film with the template protein. The results showed that the imprinted PQC film can give selective recognition to the template protein. The effects of salts and solvents on the binding capacity of the imprinted film with protein were discussed in detail. Other influencing factors (temperature and pH) have also been investigated. This self-assembly sol-gel imprinting technique was proved to be an alternative method for the preparation of biomacromolecule-imprinted thin film.     

Microbial imprinted polypyrrole/poly(3-methylthiophene) composite films for the detection of Bacillus endospores

The fabrication of Bacillus subtilis endospore imprinted conducting polymer films and subsequent electrochemical detection of bound spores is reported. Imprinted films were prepared by absorbing spores on the surface of glassy carbon electrodes upon which a polypyrrole, followed by a poly(3-methylthiophene), layer were electrochemically deposited. Spore template release was achieved through soaking the modified electrode in DMSO. Binding of endospores to imprinted films could be detected via impedance spectroscopy by monitoring changes in Y' (susceptance) using Mn(II)Cl2 (0.5M pH 3) as the supporting electrolyte. Here, the change in Y' could be correlated to spore densities between 10(4) and 10(7)cfu/ml. More sensitive detection of absorbed spores was achieved by following endospore germination via changes in film charge as measured using cyclic voltammetry. Here, imprinted films were submerged in spore suspensions to permit absorption, heat activated at 70 degrees C for 10 min prior to transferring to an electrochemical cell containing germination activators. By using the assay format it was possible to detect 10(2)cfu/ml. The observed changes in film charge could be attributed to the interaction of the supporting conducting polymer with dipicolinic acid (DPA) and other constituents released from the core in the course of germination. In all cases, it was not possible to regenerate the imprinted films without losing electrode response. In summary, the study has provided proof-of-concept for fabricating microbial imprinted films using conducting polymers.     

Fab fragments imprinted SPR biosensor for real-time human immunoglobulin G detection

F(ab) fragments imprinted surface plasmon resonance (SPR) chip was prepared for the real-time detection of human immunoglobulin G (IgG). In order to attach polymerization precursor on SPR chip, the SPR chip surface was modified with allyl mercaptan. F(ab) fragments of the IgG molecules were prepared by papain digestion procedure and collected by fast protein liquid chromatography (FPLC) system using Hi-Trap_r Protein A FF column. The collected F(ab) fragments were complexed with histidine containing specific monomer, N-methacryloyl-l-histidine methyl ester (MAH). Molecular imprinted polymeric nanofilm was prepared on SPR chip in the presence of ethylene glycol dimethacrylate and 2-hydroxyethylmethacrylate. The template molecules, F(ab) fragments, were removed from the polymeric nanofilm using 1M NaCl solution (pH: 7.4, phosphate buffer system). The molecular imprinted SPR chip was characterized by contact angle, atomic force microscopy and Fourier transform infrared spectroscopy. By the real-time IgG detection studies carried out using aqueous IgG solutions in different concentrations, the kinetics and isotherm parameters of the molecular imprinted SPR chip-IgG system were calculated. To show selectivity and specificity of the molecular imprinted SPR chip, competitive kinetic analyses were performed using bovine serum albumin (BSA), IgG, F(ab) and F(c) fragments in singular and competitive manner. As last step, IgG detection studies from human plasma were performed and the measured IgG concentrations were well matched with the results determined by enzyme-linked immunosorbent assay (ELISA). The results obtained with the molecular imprinted SPR chip were well fitted to Langmuir isotherm and the detection limit was found as 56 ng/mL. In the light of the results, we can conclude that the proposed molecular imprinted SPR chip can detect IgG molecules from both aqueous solutions and complex natural samples.