Thermodynamic profiling of peptide membrane interactions by isothermal titration calorimetry: a search for pores and micelles

Antimicrobial peptides are known to interact strongly with negatively charged lipid membranes, initially by peripheral insertion of the peptide into the bilayer, which for some antimicrobial peptides will be followed by pore formation, and successive solubilization of the membranes resulting in mixed peptide-lipid micelles. We have investigated the mode of action of the antimicrobial peptide mastoparan-X using isothermal titration calorimetry (ITC) and cryo-transmission electron microscopy (cryo-TEM). The results show that mastoparan-X induces a range of structural transitions of POPC/POPG (3:1) lipid membranes at different peptide/lipid ratios. It has been established that ITC can be used as a fast method for localizing membrane transitions and when combined with DLS and cryo-TEM can elucidate structural changes, including the threshold for pore formation and micellation. Cryo-TEM was employed to confirm the structural changes associated with the thermodynamic transitions found by ITC. The pore-formation process has furthermore been investigated in detail and the thermodynamic parameters of pore formation have been characterized using a system-specific temperature where the enthalpy of peptide partitioning becomes zero (T_zero). This allows for an exclusive study of the pore-formation process. The use of ITC to find T_zero allows for characterization of the thermodynamic parameters of secondary processes on lipid membranes.     

Partitioning of Triton X-100, deoxycholate and C(10)EO(8) into bilayers composed of native and hydrogenated egg yolk sphingomyelin

We have used isothermal titration calorimetry (ITC) to study the thermodynamics of Triton X-100 (T(X-100)), deoxycholate and decyl octaethylene glycol (C(10)EO(8)) penetration into bilayers composed of native (ESM) and hydrogenated egg yolk sphingomyelin (DHSM). Light scattering measurements were used to study the point of saturation (R(e,sat)) and the onset of solubilization of membranes by the detergents. We found that DHSM bilayers at 25 degrees C were much more resistant to detergent partitioning (lower K) and gave higher reaction enthalpies (DeltaH) for all three detergents compared to the ESM bilayer system. Because DHSM lacks double bonds (Delta(4trans) and some cis bonds as well), attractive acyl chain interactions are favored in membranes of this lipid class. The high stability and cohesion of DHSM in membranes could be a crucial functional property of this lipid as it is enriched in eye lens membranes.     

A "release" protocol for isothermal titration calorimetry

Isothermal titration calorimetry (ITC) has become a standard method for investigating the binding of ligands to receptor molecules or the partitioning of solutes between water and lipid vesicles. Accordingly, solutes are mixed with membranes (or ligands with receptors), and the subsequent heats of incorporation (or binding) are measured. In this paper we derive a general formula for modeling ITC titration heats in both binding and partitioning systems that allows for the modeling of the classic incorporation or binding protocols, as well as of new protocols assessing the release of solute from previously solute-loaded vesicles (or the dissociation of ligand/receptor complexes) upon dilution. One major advantage of a simultaneous application of the incorporation/binding and release protocols is that it allows for the determination of whether a ligand is able to access the vesicle interior within the time scale of the ITC experiment. This information cannot be obtained from a classical partitioning experiment, but it must be known to determine the partition coefficient (or binding constant and stochiometry) and the transfer enthalpy. The approach is presented using the partitioning of the nonionic detergent C12EO7 to palmitoyloleoylphosphatidylcholine vesicles. The release protocol could also be advantageous in the case of receptors that are more stable in the ligand-saturated rather than the ligand-depleted state.     

Insights into protein–polysorbate interactions analysed by means of isothermal titration and differential scanning calorimetry

Therapeutic proteins formulated as liquid solutions at high protein concentration are very sensitive to chemical and physical degradation. Especially avoiding the formation of protein aggregates is very crucial for product quality. In order to stabilize the colloidal properties of protein therapeutics various excipient are used. Especially the detergents polysorbate 20 and 80 are common. However, the mechanism upon which the detergents protect the protein from aggregation is not really known. The present study investigates the interaction of polysorbate 20 and 80 with different proteins: lysozyme, bovine serum albumin (BSA) and an immunoglobulin. The interaction and binding of the detergents to the proteins is investigated by isothermal titration calorimetry (ITC). From ITC the thermodynamic parameters (ΔH: change in enthalpy, ΔS: entropy and ΔG: free energy) upon binding are derived as well as the binding constant K _a. The thermal stability of the proteins in the presence of the detergent is assessed by differential scanning calorimetry (DSC). The results show that both detergents bind to BSA with K _a between 8 and 12 × 10³ M⁻¹ with ΔH −50 to −60 kJ/mol (25°C). One to two detergent molecules bind to BSA. The presence of both detergents induces a weak stabilisation of the thermal denaturation properties of BSA. However, the interaction of polysorbate 20 and 80 with lysozyme and the immunoglobulin is quite negligible. The presence of the detergents up to a concentration of 2 mM has no impact on the heat capacity curve neither a destabilisation nor a stabilisation of the native conformation is observed.     

Partitioning of Triton X-100, deoxycholate and C10EO8 into bilayers composed of native and hydrogenated egg yolk sphingomyelin

We have used isothermal titration calorimetry (ITC) to study the thermodynamics of Triton X-100 (T_X-100), deoxycholate and decyl octaethylene glycol (C₁₀EO₈) penetration into bilayers composed of native (ESM) and hydrogenated egg yolk sphingomyelin (DHSM). Light scattering measurements were used to study the point of saturation (R_e,sat) and the onset of solubilization of membranes by the detergents. We found that DHSM bilayers at 25 °C were much more resistant to detergent partitioning (lower K) and gave higher reaction enthalpies (ΔH) for all three detergents compared to the ESM bilayer system. Because DHSM lacks double bonds (Δ^4trans and some cis bonds as well), attractive acyl chain interactions are favored in membranes of this lipid class. The high stability and cohesion of DHSM in membranes could be a crucial functional property of this lipid as it is enriched in eye lens membranes.     

Mechanisms of phase behaviour and protein partitioning in detergent/polymer aqueous two-phase systems for purification of integral membrane proteins

Detergent/polymer aqueous two-phase systems are studied as a fast, mild and efficient general separation method for isolation of labile integral membrane proteins. Mechanisms for phase behaviour and protein partitioning of both membrane-bound and hydrophilic proteins have been examined in a large number of detergent/polymer aqueous two-phase systems. Non-ionic detergents such as the Triton series (polyoxyethylene alkyl phenols), alkyl polyoxyethylene ethers (C(m)EO(n)), Tween series (polyoxyethylene sorbitol esters) and alkylglucosides form aqueous two-phase systems in mixtures with hydrophilic polymers, such as PEG or dextran, at low and moderate temperatures. Phase diagrams for these mixtures are shown and phase behaviour is discussed from a thermodynamic model. Membrane proteins, such as bacteriorhodopsin and cholesterol oxidase, were partitioned strongly to the micelle phase, while hydrophilic proteins, BSA and lysozyme, were partitioned to the polymer phase. The partitioning of membrane protein is mainly determined by non-specific hydrophobic interactions between detergent and membrane protein. An increased partitioning of membrane proteins to the micelle phase was found with an increased detergent concentration difference between the phases, lower polymer molecular weight and increased micelle size. Partitioning of hydrophilic proteins is mainly related to excluded volume effects, i.e. increased phase component size made the hydrophilic proteins partition more to the opposite phase. Addition of ionic detergent to the system changed the partitioning of membrane proteins slightly, but had a strong effect on hydrophilic proteins, and can be used for enhanced separation between hydrophilic proteins and membrane protein.     

Membrane protein stability can be compromised by detergent interactions with the extramembranous soluble domains

Detergent interaction with extramembranous soluble domains (ESDs) is not commonly considered an important determinant of integral membrane protein (IMP) behavior during purification and crystallization, even though ESDs contribute to the stability of many IMPs. Here we demonstrate that some generally nondenaturing detergents critically destabilize a model ESD, the first nucleotide‐binding domain (NBD1) from the human cystic fibrosis transmembrane conductance regulator (CFTR), a model IMP. Notably, the detergents show equivalent trends in their influence on the stability of isolated NBD1 and full‐length CFTR. We used differential scanning calorimetry (DSC) and circular dichroism (CD) spectroscopy to monitor changes in NBD1 stability and secondary structure, respectively, during titration with a series of detergents. Their effective harshness in these assays mirrors that widely accepted for their interaction with IMPs, i.e., anionic > zwitterionic > nonionic. It is noteworthy that including lipids or nonionic detergents is shown to mitigate detergent harshness, as will limiting contact time. We infer three thermodynamic mechanisms from the observed thermal destabilization by monomer or micelle: (i) binding to the unfolded state with no change in the native structure (all detergent classes); (ii) native state binding that alters thermodynamic properties and perhaps conformation (nonionic detergents); and (iii) detergent binding that directly leads to denaturation of the native state (anionic and zwitterionic). These results demonstrate that the accepted model for the harshness of detergents applies to their interaction with an ESD. It is concluded that destabilization of extramembranous soluble domains by specific detergents will influence the stability of some IMPs during purification.     

Interaction of octyl-beta-thioglucopyranoside with lipid membranes.

Octyl-beta-thioglucopyranoside (octyl thioglucoside, OTG) is a nonionic surfactant used for the purification, reconstitution, and crystallization of membrane proteins. The thermodynamic properties of the OTG-membrane partition equilibrium are not known and have been investigated here with high-sensitivity titration calorimetry. The critical concentration for inducing the bilayer <==> micelle transition was determined as cD* = 7.3 mM by 90 degree light scattering. All thermodynamic studies were performed well below this limit. Sonified, unilamellar lipid vesicles composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) with and without cholesterol were employed in the titration calorimetry experiments, and the temperature was varied between 28 degrees C and 45 degrees C. Depending on the surfactant concentration in the membrane, the partition enthalpy was found to be exothermic or endothermic, leading to unusual titration patterns. A quantitative interpretation of all titration curves was possible with the following model: 1) The partitioning of OTG into the membrane follows a simple partition law, i.e., Xb = Kc(D,f), where Xb denotes the molar amount of detergent bound per mole of lipid and c(D,f) is the detergent concentration in bulk solution. 2) The partition enthalpy for the transfer of OTG from the aqueous phase to the membrane depends linearly on the mole fraction, R, of detergent in the membrane. All calorimetric OTG titration curves can be characterized quantitatively by using a composition-dependent partition enthalpy of the form deltaHD(R) = -0.08 + 1.7 R (kcal/mol) (at 28 degrees C). At low OTG concentrations (R < or = 0.05) the reaction enthalpy is exothermic; it becomes distinctly endothermic as more and more surfactant is incorporated into the membrane. OTG has a partition constant of 240 M(-1) and is more hydrophobic than its oxygen-containing analog, octyl-beta-D-glucopyranoside (OG). Including a third nonionic amphiphile, octa(ethyleneoxide) dodecylether (C12EO8), an empirical relation can be established between the Gibbs energies of membrane partitioning, deltaGp, and micelle formation, deltaGmic, with deltaGp = 1.398 + 0.647 deltaGmic (kcal/mol). The partition constant of OTG is practically independent of temperature and of the cholesterol content of the membrane. In contrast, the partition enthalpy shows a strong temperature dependence. The molar specific heat capacity of the transfer of OTG from the aqueous phase to the membrane is deltaCp = -98 cal/(mol x K). The OTG partition enthalpy is also dependent on the cholesterol content of the membrane. It increases by approximately 1 kcal/mol at 50 mol% cholesterol. As the partition constant remains unchanged, the increase in enthalpy is compensated for by a corresponding increase in entropy, presumably caused by a restructuring of the membrane hydration layer.     

Effect of detergents on the thermal behavior of elastin‐like polypeptides

Elastin‐like polypeptide (ELP) fusions have been designed to allow large‐scale, nonchromatographic purification of many soluble proteins by using the inverse transition cycling (ITC) method; however, the sensitivity of the aqueous lower critical solubility phase transition temperature (T_t) of ELPs to the addition of cosolutes, including detergents, may be a potential hindrance in purification of proteins with surface hydrophobicity in such a manner. To identify detergents that are known to solubilize such proteins (e.g., membrane proteins) and that have little effect on the T_t of the ELP, we screened a number of detergents with respect to their effects on the T_t and secondary structures of a model ELP (denoted here as ELP180). We found that mild detergents (e.g., n‐dodecyl‐β‐D ‐maltoside, Triton‐X100, and 3‐[(3‐cholamidopropyl) dimethylamino]‐1‐propanesulfonate) do not alter the phase transition behavior or structure (as probed by circular dichroism) of ELP180. This result is in contrast to previous studies that showed a strong effect of other detergents (e.g., sodium dodecylsulfate) on the T_t of ELPs. Our results clearly indicate that mild detergents do not preclude ITC‐based separation of ELPs, and thus that ELP fusions may prove to be useful in the purification of detergent‐solubilized recombinant hydrophobic proteins, including membrane proteins, which are otherwise notoriously difficult to extract and purify by conventional separation methods (e.g., chromatography). © 2012 Wiley Periodicals, Inc.     

The mechanism of detergent solubilization of liposomes and protein-containing membranes.

The present study explores intermediate stages in detergent solubilization of liposomes and Ca2+-ATPase membranes by sodium dodecyl sulfate (SDS) and medium-sized ( approximately C12) nonionic detergents. In all cases detergent partitioning in the membranes precedes cooperative binding and solubilization, which is facilitated by exposure to detergent micelles. Nonionic detergents predominantly interact with the lipid component of Ca2+-ATPase membranes below the CMC (critical micellar concentration), whereas SDS extracts Ca2+-ATPase before solubilization of lipid. At the transition to cooperative binding, n-dodecyl octaethylene glycol monoether (C12E8), Triton X-100, and dodecyldimethylamine oxide induce fusion of small unilamellar liposomes to larger vesicles before solubilization. Solubilization of Ca2+-ATPase membranes is accompanied by membrane fragmentation and aggregation rather than vesicle fusion. Detergents with strongly hydrophilic heads (SDS and beta-D-dodecylmaltoside) only very slowly solubilize liposomal membranes and do not cause liposome fusion. These properties are correlated with a slow bilayer flip-flop. Our data suggest that detergent solubilization proceeds by a combination of 1) a transbilayer attack, following flip-flop of detergent molecules across the lipid bilayer, and 2) extraction of membrane components directly by detergent micelles. The present study should help in the design of efficient solubilization protocols, accomplishing the often delicate balance between preserving functional properties of detergent sensitive membrane proteins and minimizing secondary aggregation and lipid content.     

A gas chromatography–mass spectrometry method to monitor detergents removal from a membrane protein sample

In membrane protein biochemical and structural studies, detergents are used to mimic membrane environment and maintain functional, stable conformation of membrane proteins in the absence of lipid bilayers. However, detergent concentration, esp. molar ratio of membrane protein to detergent is usually unknown. Here, a gas chromatography–mass spectrometry selected ion monitoring (GC–MS-SIM) method was developed to quantify four detergents which are frequently used in membrane protein structural studies. To remove excessive detergents, a filtered centrifugation using Centricon tubes was applied. A membrane protein Ig-Beta fragment in four different detergent micelles was exemplified. Detergent concentrations in the upper and lower fraction of the Centricon tube were measured after each round of centrifugation. The results were very consistent to basic properties of detergent micelles in aqueous solvents. Therefore, coupling of GC–MS-SIM and detergent removal by Centricon tubes, detergents concentration, esp. molar ratio of membrane protein to detergent could be controlled, which will expedite membrane protein structural and biochemical studies.     

Variation of the Detergent-Binding Capacity and Phospholipid Content of Membrane Proteins When Purified in Different Detergents

Purified membrane proteins are ternary complexes consisting of protein, lipid, and detergent. Information about the amounts of detergent and endogenous phospholipid molecules bound to purified membrane proteins is largely lacking. In this systematic study, three model membrane proteins of different oligomeric states were purified in nine different detergents at commonly used concentrations and characterized biochemically and biophysically. Detergent-binding capacities and phospholipid contents of the model proteins were determined and compared. The insights on ternary complexes obtained from the experimental results, when put into a general context, are summarized as follows. 1), The amount of detergent and 2) the amount of endogenous phospholipids bound to purified membrane proteins are dependent on the size of the hydrophobic lipid-accessible protein surface areas and the physicochemical properties of the detergents used. 3), The size of the detergent and lipid belt surrounding the hydrophobic lipid-accessible surface of purified membrane proteins can be tuned by the appropriate choice of detergent. 4), The detergents n-nonyl-β-D-glucopyranoside and Cymal-5 have exceptional delipidating effects on ternary complexes. 5), The types of endogenous phospholipids bound to membrane proteins can vary depending on the detergent used for solubilization and purification. 6), Furthermore, we demonstrate that size-exclusion chromatography can be a suitable method for estimating the molecular mass of ternary complexes. The findings presented suggest a strategy to control and tune the numbers of detergent and endogenous phospholipid molecules bound to membrane proteins. These two parameters are potentially important for the successul crystallization of membrane proteins for structure determination by crystallographic approaches.     

Phase separation in the isolation and purification of membrane proteins

Phase separation is a simple, efficient, and cheap method to purify and concentrate detergent-solubilized membrane proteins. In spite of this, phase separation is not widely used or even known among membrane protein scientists, and ready-to-use protocols are available for only relatively few detergent/membrane protein combinations. Here, we summarize the physical and chemical parameters that influence the phase separation behavior of detergents commonly used for membrane protein studies. Examples for the successful purification of membrane proteins using this method with different classes of detergents are provided. As the choice of the detergent is critical in many downstream applications (e.g., membrane protein crystallization or functional assays), we discuss how new phase separation protocols can be developed for a given detergent buffer system.     

去污剂的性质及其在膜蛋白结构生物学中的应用

膜蛋白在诸多生物过程,如呼吸作用、光合作用、信号识别和分子转运等方面发挥着重要作用,近年来,去污剂的快速发展,在一定程度上极大地推动了膜蛋白研究的进展。去污剂广泛应用于膜蛋白的提取、增溶、纯化、理化性质及结构研究,然而如何选择合适的去污剂往往是一项复杂的任务。本文从以下两个方面入手系统地描述了去污剂的重要理化性质及其在膜蛋白结构功能研究中的应用,（1）去污剂结构及其对去污剂性质和水溶性的影响,去污剂形成胶束的条件及影响去污剂胶束形成的其他因素。希望这些关于去污剂的基本性质和参数的介绍,可以为相关科研工作者选用去污剂提供一个理论依据。（2）去污剂抽提膜蛋白的流程和注意细节,去污剂对膜蛋白纯化时分子量测定的影响,膜蛋白研究中去污剂的置换与去除,膜蛋白结构、功能研究案例归纳。希望这些应用细节、课题研究,可以为相关科研工作者研究膜蛋白结构功能时提供一个经验借鉴。     

P-glycoprotein-ATPase modulation: the molecular mechanisms

P-glycoprotein-ATPase is an efflux transporter of broad specificity that counteracts passive allocrit influx. Understanding the rate of allocrit transport therefore matters. Generally, the rates of allocrit transport and ATP hydrolysis decrease exponentially with increasing allocrit affinity to the transporter. Here we report unexpectedly strong down-modulation of the P-glycoprotein-ATPase by certain detergents. To elucidate the underlying mechanism, we chose 34 electrically neutral and cationic detergents with different hydrophobic and hydrophilic characteristics. Measurement of the P-glycoprotein-ATPase activity as a function of concentration showed that seven detergents activated the ATPase as expected, whereas 27 closely related detergents reduced it significantly. Assessment of the free energy of detergent partitioning into the lipid membrane and the free energy of detergent binding from the membrane to the transporter revealed that the ratio, q, of the two free energies of binding determined the rate of ATP hydrolysis. Neutral (cationic) detergents with a ratio of q = 2.7 ± 0.2 (q > 3) followed the aforementioned exponential dependence. Small deviations from the optimal ratio strongly reduced the rates of ATP hydrolysis and flopping, respectively, whereas larger deviations led to an absence of interaction with the transporter. P-glycoprotein-ATPase inhibition due to membrane disordering by detergents could be fully excluded using ²H-NMR-spectroscopy. Similar principles apply to modulating drugs.     

去污剂的性质及其在膜蛋白结构生物学中的应用

膜蛋白在诸多生物过程,如呼吸作用、光合作用、信号识别和分子转运等方面发挥着重要作用,近年来,去污剂的快速发展,在一定程度上极大地推动了膜蛋白研究的进展。去污剂广泛应用于膜蛋白的提取、增溶、纯化、理化性质及结构研究,然而如何选择合适的去污剂往往是一项复杂的任务。本文从以下两个方面入手系统地描述了去污剂的重要理化性质及其在膜蛋白结构功能研究中的应用,（1）去污剂结构及其对去污剂性质和水溶性的影响,去污剂形成胶束的条件及影响去污剂胶束形成的其他因素。希望这些关于去污剂的基本性质和参数的介绍,可以为相关科研工作者选用去污剂提供一个理论依据。（2）去污剂抽提膜蛋白的流程和注意细节,去污剂对膜蛋白纯化时分子量测定的影响,膜蛋白研究中去污剂的置换与去除,膜蛋白结构、功能研究案例归纳。希望这些应用细节、课题研究,可以为相关科研工作者研究膜蛋白结构功能时提供一个经验借鉴。     

Understanding Detergent Effects on Lipid Membranes: A Model Study of Lysolipids

Lysolipids and fatty acids are the natural products formed by the hydrolysis of phospholipids. Lysolipids and fatty acids form micelles in solution and acts as detergents in the presence of lipid membranes. In this study, we investigate the detergent strength of a homologous series of lyso-phosphatidylcholine lipids (LPCs) on 1-palmitoyl-2-oleyl-sn-glycerol-3-phosphatidylcholine (POPC) lipid membranes by use of isothermal titration calorimetry and vesicle fluctuation analysis. The membrane partition coefficient (K) and critical micelle concentration (cmc) are determined by isothermal titration calorimetry and found to obey an inverse proportionality relation (cmc·K ∼ 0.05-0.3). The partition coefficient and critical micelle concentration are used for the analysis of the effect of LPCs on the membrane bending rigidity. The dependency of the bending rigidity on LPC membrane coverage has been analyzed in terms of a phenomenological model based on continuum elastic theory, which yields information about the curvature-inducing properties of the LPC molecule. The results reveal: 1), an increase in the partition coefficient with increasing LPC acyl-chain length; and 2), that the degree of acyl-chain mismatch between LPC and POPC determines the magnitude of the membrane mechanical perturbation per LPC molecule in the membrane. Finally, the three-stage model describing detergent membrane interaction has been extended by a parameter D_MCI, which governs the membrane curvature stability in the detergent concentration range below the cmc-value of the LPC molecule.     

Correlation of membrane/water partition coefficients of detergents with the critical micelle concentration

The membrane/water partition coefficients, K, of 15 electrically neutral (non-charged or zwitterionic) detergents were measured with phospholipid vesicles by using isothermal titration calorimetry, and were compared to the corresponding critical micellar concentrations, cmc. The detergents measured were oligo(ethylene oxide) alkyl ethers (C(m)EO(n) with m = 10/n = 3, 7 and m = 12/n = 3.8); alkylglucosides (octyl, decyl); alkylmaltosides (octyl, decyl, dodecyl); diheptanoylphosphatidylcholine; Tritons (X-100, X-114) and CHAPS. A linear relation between the free energies of partitioning into the membrane and micelle formation was found such that K. CMC approximately 1. The identity K. CMC = 1 was used to classify detergents with respect to their membrane disruption potency. "Strong" detergents are characterized by K. CMC < 1 and solubilize lipid membranes at detergent-to-lipid ratios X(b) < 1 (alkylmaltosides, tritons, heptaethylene glycol alkyl ethers). "Weak" detergents are characterized by K. CMC > 1 and accumulate in the membrane- to detergent-to-lipid ratios X(b) > 1 before the bilayer disintegrates (alkylglucosides, pentaethylene glycol dodecyl ether).     

Deuterated detergents for structural and functional studies of membrane proteins: Properties,chemical synthesis and applications

Abstract

Detergents are amphiphilic compounds that have crucial roles in the extraction, purification and stabilization of integral membrane proteins and in experimental studies of their structure and function. One technique that is highly dependent on detergents for solubilization of membrane proteins is solution-state NMR spectroscopy, where detergent micelles often serve as the best membrane mimetic for achieving particle sizes that tumble fast enough to produce high-resolution and high-sensitivity spectra, although not necessarily the best mimetic for a biomembrane. For achieving the best quality NMR spectra, detergents with partial or complete deuteration can be used, which eliminate interfering proton signals coming from the detergent itself and also eliminate potential proton relaxation pathways and strong dipole-dipole interactions that contribute line broadening effects. Deuterated detergents have also been used to solubilize membrane proteins for other experimental techniques including small angle neutron scattering and single-crystal neutron diffraction and for studying membrane proteins immobilized on gold electrodes. This is a review of the properties, chemical synthesis and applications of detergents that are currently commercially available and/or that have been synthesized with partial or complete deuteration. Specifically, the detergents are sodium dodecyl sulphate (SDS), lauryldimethylamine-oxide (LDAO), n-octyl-β-D-glucoside (β-OG), n-dodecyl-β-D-maltoside (DDM) and fos-cholines including dodecylphosphocholine (DPC). The review also considers effects of deuteration, detergent screening and guidelines for detergent selection. Although deuterated detergents are relatively expensive and not always commercially available due to challenges associated with their chemical synthesis, they will continue to play important roles in structural and functional studies of membrane proteins, especially using solution-state NMR.     

Thermodynamics of sodium dodecyl sulfate partitioning into lipid membranes

The partition equilibria of sodium dodecyl sulfate (SDS) and lithium dodecyl sulfate between water and bilayer membranes were investigated with isothermal titration calorimetry and spectroscopic methods (light scattering, (31)P-nuclear magnetic resonance) in the temperature range of 28 degrees C to 56 degrees C. The partitioning of the dodecyl sulfate anion (DS(-)) into the bilayer membrane is energetically favored by an exothermic partition enthalpy of Delta H(O)(D) = -6.0 kcal/mol at 28 degrees C. This is in contrast to nonionic detergents where Delta H(O)(D) is usually positive. The partition enthalpy decreases linearly with increasing temperature and the molar heat capacity is Delta C(O)(P) = -50 +/- 3 cal mol(-1) K(-1). The partition isotherm is nonlinear if the bound detergent is plotted versus the free detergent concentration in bulk solution. This is caused by the electrostatic repulsion between the DS(-) ions inserted into the membrane and those free in solution near the membrane surface. The surface concentration of DS(-) immediately above the plane of binding was hence calculated with the Gouy-Chapman theory, and a strictly linear relationship was obtained between the surface concentration and the extent of DS(-) partitioning. The surface partition constant K describes the chemical equilibrium in the absence of electrostatic effects. For the SDS-membrane equilibrium K was found to be 1.2 x 10(4) M(-1) to 6 x 10(4) M(-1) for the various systems and conditions investigated, very similar to data available for nonionic detergents of the same chain length. The membrane-micelle phase diagram was also studied. Complete membrane solubilization requires a ratio of 2.2 mol SDS bound per mole of total lipid at 56 degrees C. The corresponding equilibrium concentration of SDS free in solution is C (sat)(D,F) approximately 1.7 mM and is slightly below the critical micelles concentration (CMC) = 2.1 mM (at 56 degrees C and 0.11 M buffer). Membrane saturation occurs at approximately 0.3 mol SDS per mol lipid and the equilibrium SDS concentration is C (sat)(D,F)approximately equal 2.2 mM +/- 0.6 mM. SDS translocation across the bilayer is slow at ambient temperature but increases at high temperatures.