Substrate Specificity and Mode of Action of the Lipase of Thermophilic Fungus Humicola lanuginosa S-38

Substrate specificity of the lipase of thermophilic fungus, Humicola lanuginosa S–38, was investigated. It was found that the lipolytic activity was greatly influenced by the structure of both fatty acid and alcohol moieties of the substrate. It was concluded that the hydrolysis of both water soluble and water insoluble ester was catalyzed by the Humicola lipase itself. The Humicola lipase showed no positional specificity and split ester bonds on all positions of triolein at about the same rate. Both palmitic acid (α) and linoleic acid (β) ester bonds of phosphatidyl-ethanolamine were split indicating no positional specificity of fatty acid ester bonds. From above results, it was made clear that mode of action of Humicola lipase on triolein and on phosphatidyl-ethanolamine is identical. The Humicola lipase had no activity of lipoprotein lipase.     

Physical and Chemical Properties of the Lipase of Thermophilic Fungus Humicola lanuginosa S-38

Some physical and chemical properties of the extracellular lipase from the thermophilic fungus, Humico la lanuginosa S–38, were investigated. The results were as follows: Sedimentation coefficient was 2.4 × 10^?13 (cm-g/sec-dyne); diffusion coefficient was 8.8 × 10^?7 (cm²/sec); and frictional coefficient was 1.22. Molecular weight was 27,500±500 and α-helix content was 18.9%. The number of amino acid residues contained in 1 mole of protein of Humicola lipase was 224. Sugar and lipid were not detected. The effect of calcium ion and denaturing reagents, such as urea, sodium dodecyl sulfate and dithiothreitol, on the thermostability of Humicola lipase was examined. It was concluded that the thermostability of Humicola lipase was not influenced by protective cofactors but was attributable to the enzyme itself. Some properties of enzyme structure which were concerned with the thermostability of Humicola lipase are also discussed.     

Short communication: Protoplast formation from the thermophilic fungus Malbranchea sulfurea,using the thermostable chitinase and laminarinase of Paecilomyces varioti

Two thermostable enzymes produced by the thermophilic fungus Paecilomyces varioti, a chitinase and laminarinase, were used to isolate protoplasts of a thermophilic fungus, Malbranchea sulfurea. The frequency of protoplast regeneration observed (35%) was considerably higher than that obtained using commercial lytic enzymes.     

Structural Features of a Cold-adapted Alaskan Bacterial Lipase

Abstract

The three dimensional model of cold-adapted Alaskan psychrotroph Pseudomonas species (Strain B11-1) lipase has been constructed by homology modeling based on the crystal structure of acetyl esterase from Rhodococcus species and refined by molecular dynamics methods. Our model locates the substrate-binding cavity and further suggests that Ser-155, Asp-250, and His-280 are the members of the catalytic triad. Substrate specificity of the modeled lipase has been examined by docking experiments, which indicates that the ester of C₆ fatty acid has the highest affinity for the enzyme. Our model also identifies the oxyanion hole that plays an important role in the stabilization of the tetrahedral intermediate during catalysis. Comparison of this cold-adapted lipase with the crystal structure of a thermophilic Bacillus stearothermophilus P1 lipase supported the assumption that cold-adapted enzymes have a more flexible three-dimensional structure than their thermophilic counterparts. The conformational flexibility of this modeled cold-adapted lipase at low temperature probably originates from a combination of factors compared to its thermophilic counterpart, i.e., lower number of salt bridges and cation-π interactions, increase in the non-polar surface area exposed to solvent. Our study may help in understanding the structural features of a cold- adapted lipase and can further be used in engineering lipase that can function at or near extreme temperatures with considerable biotechnological potential.     

Cultural Conditions and Some Properties of the Lipase of Humicola lanuginosa S-38

The cultural conditions for the production of thermostable lipase by a thermophilic fungus Humicola lanuginosa S-38 were investigated. The optimal cultural conditions to obtain the maximum yield of thermostable lipase with a 600-liter stainless steel fermentor were as follows: optimal medium- 2.0% soluble starch, 5.0% corn steep liquor, 0.2% K₂HPO₄, 0.1% MgSO₄·7H₂O, 0.5% CaCO₃, 0.5% soybean oil, 0.005% deforming agent (Adecanol LG-109); optimal fermentation conditions- temperature 45°C; rate of agitation 300 rpm; initial pH 7.0; rate of aeration 1/1 volume per volume of medium per minute. The optimal pH of the crude lipase preparation for the hydrolysis of the polyvinyl alcohol-emulsified olive oil was 8.0 and the optimal temperature was 60°C. It retained 100% of activity with the heat treatment at 60°C for 2 hr, but at 70°C for 20 min only 35% activity retained.     

A unique thermostable and organic solvent tolerant lipase from newly isolated <Emphasis Type="Italic">Aneurinibacillus thermoaerophilus</Emphasis> strain HZ: physical factor studies

A newly isolated thermophilic bacterium, Aneurinibacillus thermoaerophilus strain HZ, from a hot spring recreational area (Sungai Kelah, Malaysia), showed an extracellular lipase activity. It was identified based on 16S rRNA sequencing, where phylogenetic analysis revealed its homology to Aneurinibacillus thermoaerophilus. The strain produced a lipase that was stable in various organic solvents such as dimethyl sulfoxide, toluene, p-xylene, and hexane. In order to increase lipase production, optimization of physical factors which affected the growth and lipase production was studied. The optimal growth was obtained at 50°C and pH 8.0; while the maximal lipase production was achieved in the logarithmic decline phase at 60°C and pH 7.5 with 7% starting inoculum and 150 rev/min shaking rate for 48 h incubation.     

Temperature response of trehalase from a mesophilic (Neurospora crassa) and a thermophilic (Thermomyces lanuginosus) fungus

The purified trehalases of the mesophilic fungus, Neurospora crassa, and the thermophilic fungus, Thermomyces lanuginosus, had similar temperature and pH optima for activity, but differed in molecular weight, electrophoretic mobility and Michaelis constant. At lower concentration, trehalases from both fungi were inactivated to similar extent at 60°C. While purified trehalase of T. lanuginosus was afforded protection against heat-inactivation by proteinaceous protective factor(s) present in mycelial extracts, by bovine serum albumin and by casein, these did not afford protection to N. crassa trehalase against heat inactivation. Both trehalases exhibited discontinuous Arrhenius plots with temperature of discontinuity at 40°C. The activation energy calculated from the slope of the Arrhenius plot was higher for the T. lanuginosus enzyme. The plots of apparent K _m versus 1/T for trehalases of N. crassa and T. lanuginosus were linear from 30° to 60°C.The results show that purified trehalases of the mesophilic and the thermophilic fungus are distinct. Although, these exhibit similar thermostability of their catalytic function at low concentration, distinctive thermal stability characteristics of thermophilic enzyme become apparent at high protein concentration. This could be brought about in the cell by the enzyme itself, or by other proteins.     

Lipase production and Penicillium simplicissimum morphology in solid-state and submerged fermentations

A comparative study of Penicillium simplicissimum morphology and lipase production was performed using solid-state (SSF) and submerged (SmF) fermentation. SSF was carried out on babassu cake as culture medium and SmF on a semi-synthetic medium and a medium based on suspended babassu cake grains. Yield of product on biomass, specific activity and conidia production were 3.3-, 1.3- and 2-fold higher in SSF. In SmF, the type of fungus growth differed according to the medium. Using the semi-synthetic medium, the fungus formed densely interwoven mycelial masses without conidia production, whereas using the babassu-based medium the fungus formed free mycelia and adhered to the surfaces of the grains, producing conidia. The results show that babassu cake induces conidiation in SmF. In SSF, the fungus not only grew on the surface of the grains, producing conidia abundantly, but also effectively colonized and penetrated the babassu particles. The high conidia production and lipase productivity in SSF may be related to the low availability of nutrients or to other stimuli associated with this type of fermentation. Thus, the high production of the thermostable P. simplicissimum lipase, using a non-supplemented, low-cost agro-industrial residue as the culture medium, demonstrates the biotechnological potential of SSF for the production of industrial enzymes.     

A new acidophilic fungus Teratosphaeria acidotherma (Capnodiales, Ascomycota) from a hot spring

A novel acidophilic fungus was isolated by an acidic enrichment culture of microbial mats and biofilms collected at an extremely acidic and high temperature hot spring. In culture studies, this fungus was revealed to produce ascomycetous teleomorph structures. Molecular phylogenetic study and morphological observation showed this fungus is a new species of the genus Teratosphaeria (Capnodiales, Dothideomycetes) and is phylogenetically close to Acidomyces acidophilus and Bispora sp., which were previously reported as acidophilic anamorphic fungi. This new fungus is described here as a new species of Teratosphaeria, and its physiological properties adapting to its habitat are demonstrated. This is the first report of a teleomorphic fungus having highly acidophilic and thermophilic properties.     

A New Thermophilic Species of <Emphasis Type="Italic">Conidiobolus</Emphasis> from India

A Conidiobolus isolate growing optimally at 40°C was isolated from decomposing leaf litter and has been designated as a new species, Conidiobolus thermophilus. Colony growth, conidial discharge and smooth zygospore formation was rapid at 40°C, while comparative growth at 35 and 45°C was slower. On the basis of its thermophilic character and morphological distinctness from all other species, the isolate is considered as a species new to science. There have been no published reports of any thermophilic or thermotolerant strains of Conidiobolus. The present fungus was isolated as part of an ongoing programme of selective isolation of unusual/rare thermophilic fungi from compost and decomposed terrestrial plant materials.     

Comparative Arrhenius plots of enzyme activity from penicillium

Comparison of the Arrhenius plots of three enzymes, formyltetrahydrofolate synthetase, glutathione reductase (GSSGR) and chorismate mutase (CM) from a thermophilic (Penicillium duponti) and a mesophilic (Penicillium chrysogenum) fungus reveals a fairly consistent pattern. In general, those enzymes extracted from mesophiles had lower activation energies than similar enzymes extracted from thermophiles. One enzyme studied, mesophilic glutathione reductase, exhibited a break in its Arrhenius plot. The allosteric enzyme studied showed slightly different sensitivities in the thermophilic versus the mesophilic extracts.     

Enzymology of the thermophilic ascomycetous fungus Thermoascus aurantiacus

Different strains of the thermophilic ascomycetous fungus Thermoascus aurantiacus have been reported in the literature to produce high levels of a variety of industrial interest enzymes (i.e. amylases, cellulases, pectinases and xylanases), which have been shown to be remarkably stable over a wide range of temperatures and appear to have tremendous commercial potential. Most studies on enzyme production by T. aurantiacus are carried out in chemically defined liquid medium, under conditions suitable for induction of a particular enzyme. A few studies have investigated the production of some enzymes by T. aurantiacus by solid-state fermentation, using lignocellulosic materials. The present review focuses on the enzymes produced by T. aurantiacus, their main kinetic parameters, and the effect of different culture conditions on production and enzyme activity. It also provides a view of the possible applications of T. aurantiacus enzymes, considering that this thermophilic fungus could comprise a potential source of thermostable enzymes.     

Extracellular and cell-bound lipase activity in relation to growth of Geotrichum candidum

Summary The imperfect fungus Geotrichum candidum produced extracellular lipase in a basic peptone-salt medium. By adding olive oil or Tween 80 to the basic medium the lipase yields could be enhanced and the maximal yields were found with Tween 80, which resulted in a sixfold increase in extracellular lipase activity as compared with basic medium. During the early phase of growth in medium with olive oil the proportion of cell-bound activity was higher than that of extracellular activity, and a delay in the secretion of extracellular lipase was found. The proportion of cell-bound activity from growth in basic medium and in basic medium with Tween 80 was lower than that of extracellular activity during the entire growth phase. Analyses by polyacrylamide gel electrophoresis showed that the lipase activity from growth in all three media could be ascribed to equivalent protein bands at 57 000 and 61 000 daltons. Immunodiffusion showed that the cell-bound preparation contained lipase that was immunologically identical with purified extracellular lipase from G. candidum.     

Production and properties of an alkaline,thermophilic lipase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> NS2W

Eighteen bacterial strains were isolated from soil samples and screened for alkaline, thermophilic lipase production. Pseudomonas fluorescens NS2W was selected and its production of lipase was optimized in shake flasks using a statistical experimental design. Cell growth and lipase production were studied in shake flasks and in a 1-l fermenter in the optimized medium. Maximum lipase yields were 69.7 and 68.7 U ml⁻¹, respectively. The optimized medium resulted in about a five-fold increase in the enzyme production, compared to that obtained in the basal medium. The lipase had an optimal activity at pH 9.0 and was stable over a wide pH range of 3–11 with more than 70% activity retention. The lipase had an optimal activity at 55°C and was stable up to 60°C with more than 70% activity retention for at least 2 h. Journal of Industrial Microbiology & Biotechnology (2002) 28, 344–348 DOI: 10.1038/sj/jim/7000254 Received 06 September 2001/ Accepted in revised form 15 March 2002     

Effect of shear rate and culture pH on the production of xylanase by Thermomyces lanuginosus

Summary The pH-value and the stirrer speed during cultivation of the thermophilic fungus Thermomyces lanuginosus were found to have a pronounced influence on xylanase production using corn cobs as carbon source. The highest xylanase activity of 32500 nkat/ml was produced in labscale fermentation within 118 hours at a stirrer speed of 50 rpm and a controlled pH-value of 7.5.     

A thermophilic glucoamylase fromCephalosporium eichhorniae

A novel exocellular glucoamylase produced by a thermophilic fungus,Cephalosporium eichhorniae, was purified by a combination of membrane filtration and Sephadex chromatography. The enzyme was a glycoprotein, 28% carbohydrate by weight. It was composed of a single polypeptide chain with a molecular weight of 26,850. The enzyme was thermostable with optimum activity between 45 and 62°C. It had a substrate preference of amylose>amylopectin. Analysis by thin-layer and gas-liquid chromatography showed the major hydrolytic product of starch was glucose, classifying this enzyme as a thermophilic glucoamylase.     

<Emphasis Type="Italic">Fervidobacterium changbaicum</Emphasis> Lip1: identification,cloning, and characterization of the thermophilic lipase as a new member of bacterial lipase family V

A novel lipase gene encoded 315 amino acid residues was obtained using lipase-prospecting primers and genome walking from hyperthermophilic bacterium Fervidobacterium changbaicum CBS-1. Sequence alignment and phylogenetic analysis revealed this novel lipase is a new member of bacterial lipase family V. The recombinant enzyme F. changbaicum lipase 1 (FCLip1) showed maximum activity at 78°C and pH 7.8. It displayed extreme thermostability at 70°C and was also stable across a wide pH range from 6.0 to 12.0. Kinetic study demonstrated FCLip1 preferentially hydrolyzed middle-length acyl chains, especially p-nitrophenyl caprate and tricaprylin. With p-nitrophenyl caprate as a substrate, the enzyme exhibited a K _m and k _cat of 4.67 μM and 22.7/s, respectively. In addition, FCLip1 was resistant to various detergents and organic solvents. This enzyme is the first reported thermophilic lipase from bacterial family Thermotogaceae. Its extreme stability with respect to temperature and pH, along with its triglyceride hydrolysis activity, indicate that FCLip1 has high potential for future application.     

Cloning and Expression of <Emphasis Type="Italic">lipP</Emphasis>, A Gene Encoding a Cold-Adapted Lipase from <Emphasis Type="Italic">Moritella</Emphasis> sp.2-5-10-1

A gene (lipP, 837 bp in length) coding for a cold-adapted lipase of psychrophilic bacterium Moritella sp. 2-5-10-1 isolated from Antarctic region was cloned and sequenced in this study. The deduced amino acid sequence revealed a protein of 278 amino acid residues with a molecular mass of 30,521. The primary structure of the lipase deduced from the nucleotide sequence showed consensus pentapeptide containing the active serine [Gly-Trp-Ser-Leu-Gly] and a conserved His-Gly dipeptide in the N-terminal part of the enzyme. These sequences were involved in the lipase active site conformation. Structure factors that would allow proper enzyme flexibility at low temperatures were discussed. It was suggested that the changes in the primary structure of the psychrophilic lipases compared to the thermophilic ones could account for their ability to catalyze lipolysis at temperatures close to 0°C. For expression, the sequence corresponding to the cold-adapted lipase of strain 2-5-10-1 was subcloned into the pET-28a expression vector to construct a recombinant lipase protein. Expression of the lipase by Escherichia coli BL21 (DE3) cells was observed as clear halos on 1% (vol/vol) tributyrin upon induction with IPTG at 25°C.     

Secretory expression and characterization of a highly Ca-activated thermostable L2 lipase

Thermostable lipases are important biocatalysts, showing many interesting properties with industrial applications. Previously, a thermophilic Bacillus sp. strain L2 that produces a thermostable lipase was isolated. In this study, the gene encoding for mature thermostable L2 lipase was cloned into a Pichia pastoris expression vector. Under the control of the methanol-inducible alcohol oxidase (AOX) promoter, the recombinant L2 lipase was secreted into the culture medium driven by the Saccharomyces cerevisiae α-factor signal sequence. After optimization the maximum recombinant lipase activity achieved in shake flasks was 125 U/ml. The recombinant 44.5 kDa L2 lipase was purified 1.8-fold using affinity chromatography with 63.2% yield and a specific activity of 458.1 U/mg. Its activity was maximal at 70 °C and pH 8.0. Lipase activity increased 5-fold in the presence of Ca²⁺. L2 lipase showed a preference for medium to long chain triacylglycerols (C₁₀–C₁₆), corn oil, olive oil, soybean oil, and palm oil. Stabilization at high temperature and alkaline pH as well as its broad substrate specificity offer great potential for application in various industries that require high temperature operations.     

Thermophilic fungi: An assessment of their potential for growth in soil

An attempt has been made to forecast the potential of thermophilic fungi to grow in soil in the laboratory and in the field in the presence of a predominantly mesophilic fungal flora at usual temperature. The respiratory rate of thermophilic fungi was markedly responsive to changes in temperature, but that of mesophilic fungi was relatively independent of such changes. This suggested that in a thermally fluctuating environment, thermophilic fungi may be at a physiological disadvantage compared to mesophilic fungi. In mixed cultures in soil plates, thermophilic fungi outgrew mesophilic fungi under a fluctuating temperature regime only when the amplitude of the fluctuating temperatures was small and approached their temperature optima for growth. An antibody probe was used to detect the activity of native or an introduced strain of a thermophilic fungus,Thermomyces lanuginosus, under field conditions. The results suggest that although widespread, thermophilic fungi are ordinarily not an active component of soil microflora. Their presence in soil most likely may be the result of the aerial dissemination of propagules from composting plant material.