Pasting properties of a heat-moisture treated canna starch in relation to its structural characteristics

Native and moistened canna starches (moisture contents of 15%, 18%, 20%, 22%, and 25%) were heat treated at 100 °C for 16 h. Heat-moisture treatment (HMT) did not alter the shape or size of starch granules. Heat-treated starches showed lower paste viscosity, more stable paste (with no breakdown) and noticeable decrease in setback value compared to untreated native starch. These changes were more obvious when the starch samples contained more moisture. Starch gel morphology investigated by I₂ staining revealed that the granules of untreated native canna starch were completely ruptured, whereas those of HMT22% and HMT25% samples remained in granular form. These gel morphologies were correlated and provided the information to explain the pasting behaviors of treated and untreated canna starches. Shifts of gelatinization endotherms towards higher temperatures (1–8 °C) with broadened peaks following the moisture contents in starch samples were found after HMT. Amylose leaching of treated samples tended to be lower when the moisture content of the samples increased. HMT did not alter crystalline type of canna starch (B-type), but with increase of the moisture, slight reduction of a peak at 5.7° and a fusion of doublet at 22° and 24° were observed.     

Changes in morphological, thermal and pasting properties of yam (Dioscorea alata) starch during growth

This study was carried out in order to compare and establish the changes in physicochemical properties of starch from four different cultivars of yam at various stages of maturity during growth. The results showed that the starch content of the four yam tubers increased as growth progressed and were in the range of 70.5–85.3% on a dry basis. The shapes of the starch granules were round to oval or angular in the four yams and the size of starch granule increased with growth time ranging from 10 to 40 μm. The X-ray diffraction patterns could be classified as typical of B-type starch for the four cultivars of yam starch. The transition temperature of gelatinization of the four yam starches decreased during maturity. The RVA parameters suggested that yam starch paste showed a lower breakdown at an early harvest time. It appeared to be thermo-stable during heating but had a high setback after cooling, which might result in a tendency towards high retrogradation. The results for pasting behaviors showed that higher amylose content was associated with a lower pasting temperature and a higher peak viscosity in these starches.     

Change of granular and molecular structures of waxy maize and potato starches after treated in alcohols with or without hydrochloric acid

Starches from waxy maize and potato were treated in methanol and 2-propanol either with or without 0.36% hydrochloric acid at 65 °C for 1 h. The granule morphology, molecular structure and pasting properties of the starches were determined and the effects of treatments on the granule and molecular structures of starch were investigated. Starch treated in alcohols without acid showed loss of native order through the hilum of granules, and no obvious molecular degradation was found. However, acid–alcohol treated starch showed many cracks inside granules, and both waxy maize and potato starches showed obvious molecular degradation after treated. Furthermore, the amylose chains and long chains of amylopectin of starch were more easily degraded with acid–alcohol treatment. The pasting viscosity of acid–alcohol treated starches were also obviously less than that of their counterpart native starch and starch after alcohol treatment. The extent of degradation of molecules and the decrease of pasting viscosity on potato starch after acid–alcohol treated were more obvious than that of waxy maize starch. The result indicates that the degradation preferentially occur in the amorphous region when starch treated by acid–alcohol, and the degradation of starch molecules enhances the amorphous excretion and the occurrence of cracks inside the granules.     

A comparative study of some properties of cassava (Manihot esculenta,Crantz) and cocoyam (Colocasia esculenta,Linn) starches

Some properties of cassava and cocoyam starches were studied and compared with a view to determining the functional applications in food systems for which they are suitable. The starches were compared in terms of their microscopic, thermal, physicochemical and rheological properties. Microscopy revealed smaller granule sizes of cocoyam starch compared with cassava. The amylose content was higher in cocoyam starch (33.3%) than in cassava starch (29.3%). Gelatinization in cassava starch occurred at a lower temperature range (60.11–72.67 °C) compared with cocoyam (72.96–80.25 °C) with the endothermic gelatinization enthalpy higher in cocoyam. The swelling power and solubility patterns indicated lower relaxation temperature, higher swelling and solubilization rates in cassava starch compared with cocoyam starch. The pasting characteristics of 8% (db, dry basis) starch slurry showed that cassava had higher peak viscosity but lower stability and setback ratios compared with cocoyam. This indicates that cocoyam starch paste is better in withstanding processing conditions and would present a superior thickening characteristic than cassava starch paste. The flow properties of both starch pastes showed non-Newtonian behaviour and could be best described by the Herschel–Bulkley model. The rate index and yield stress of cocoyam starch paste was higher than that of cassava. The storage modulus of cocoyam starch paste was higher than that of cassava indicating that cocoyam starch paste was more rigid than cassava starch paste. Cassava starch paste exhibited higher paste clarity and freeze-thaw stability than cocoyam starch paste. The properties of cassava and cocoyam starches dictate their food applications.     

Ultra high pressure (UHP)-assisted acetylation of corn starch

Potential roles of ultra high pressure (UHP) in starch granule reactivity and properties of acetylated starch were investigated. Corn starch was substituted with acetic anhydride at pressure range of 0.1–400 MPa for 15 min; also, conventional reaction (30 °C, 60 min) was conducted as reaction control. Native and acetylated corn starches were assessed with respect to degree of substitution (DS), X-ray diffraction pattern/relative crystallinity, starch solubility/swelling power, gelatinization, and pasting behavior. For the UHP-assisted acetylated starches, DS values increased along with increasing pressure levels from 200 to 400 MPa, and reaction at 400 MPa exhibited maximum reactivity (though lower than the DS value of the reaction control). Both UHP-assisted and conventional acetylation of starch likely occurred predominantly at amorphous regions within granules. Gelatinization and pasting properties of the UHP-assisted acetylated starches may be less influenced by UHP treatment in acetylation reaction, though restricted starch solubility/swelling were observed.     

New starches: Physicochemical properties of sweetsop (Annona squamosa) and soursop (Anonna muricata) starches

Starch from the fruits of sweetsop (Anonna squamosa) and soursop (Anonna muricata) were isolated and purified and the fat, ash, phosphorus and protein contents measured. The amount of amylose present was determined spectrophotometrically and found to be very similar (19%) for both starches. Scanning electron microscopy showed very small indented and spherical granules from both with an average granule size of 4.84 μm and 4.72 μm, respectively. The physicochemical properties, namely the swelling power, solubility, pasting characteristics, paste clarity and freeze–thaw stability were studied to assess the functionality of the starch pastes as hydrocolloids. The sweetsop starch showed higher swelling power and solubility compared to soursop starch and had a lower gelatinization temperature indicating a weaker granular structure. Sweetsop starch exhibited a lower pasting temperature, higher viscosity peak, higher viscosity breakdown and lower setback, higher paste clarity and freeze–thaw stability compared to soursop starch. The low gelatinization temperature and high freeze thaw stability of sweetsop starch are comparable to that of waxy corn. The properties of sweetsop indicate that it has potential for application as a thickener in frozen foods.     

Physico-chemical and morphological characteristics of New Zealand Taewa (Maori potato) starches

The physico-chemical, morphological, thermal, pasting, textural, and retrogradation properties of the starches isolated from four traditional Taewa (Maori potato) cultivars (Karuparera, Tutaekuri, Huakaroro, Moemoe) of New Zealand were studied and compared with starch properties of a modern potato cultivar (Nadine). The relationships between the different starch characteristics were quantified using Pearson correlation and principal component analysis. Significant differences were observed among physico-chemical properties such as phosphorus content, amylose content, swelling power, solubility and light transmittance of starches from the different potato cultivars. The starch granule morphology (size and shape) for all the potato cultivars showed considerable variation when studied by scanning electron microscopy and particle size analysis. Starch granules from Nadine and Moemoe cultivars showed the presence of large and irregular or cuboid granules in fairly high number compared with the starches from the other cultivars. The transition temperatures (T_o; T_p; T_c) and the enthalpies (ΔH_gel) associated with gelatinization suggested differences in the stability of the crystalline structures among these potato starches. The Moemoe starch showed the lowest T_o, while it was higher for Tutaekuri and Karuparera starches. Pasting properties such as peak, final and breakdown viscosity and texture profile analysis (TPA) parameters of starch gels such as hardness and fracturability were found to be higher for Nadine and Huakaroro starches. The Nadine and Huakaroro starch gels also had lower tendency towards retrogradation as evidenced by their lower syneresis (%) during storage at 4 °C. Principal component analysis showed that the Tutaekuri and Nadine cultivars differed to the greatest degree in terms of the properties of their starches.     

Structural and physicochemical characterisation of rye starch

The gelatinisation, pasting and retrogradation properties of three rye starches isolated using a proteinase-based procedure were investigated and compared to those of wheat starch isolated in a comparable way. On an average, the rye starch granules were larger than those of wheat starch. The former had very comparable gelatinisation temperatures and enthalpies, but slightly lower gelatinisation temperatures than wheat starch. Under standardised conditions, they retrograded to a lesser extent than wheat starch. The lower gelatinisation temperatures and tendencies of the rye starches to retrograde originated probably from their higher levels of short amylopectin (AP) chains [degree of polymerisation (DP) 6–12] and their lower levels of longer chains (DP 13–24) than observed for wheat starch. The rapid visco analysis differences in peak and end viscosities between the rye starches as well as between rye and wheat starches were at least partly attributable to differences in the levels of AP short chains and in average amylose molecular weight. The AP average chain lengths and exterior chain lengths were slightly lower for rye starches, while the interior chain lengths were slightly higher than those for wheat starch.     

A rheological investigation of cereal starch pastes and gels. Effect of pasting procedures

Wheat and maize starches have been pasted using four different pasting procedures by varying the heating and stirring rates. The flow behaviour of hot starch pastes was investigated over a wide range of concentrations (∼ 3 to 10·5%). For each type of starch each pasting procedure resulted in a specific flow behaviour. Flow curves were tentatively interpreted on the basis of swelling-solubility values, and it was demonstrated that the overall viscosity of starch pastes is primarily governed by a combination of the volume fraction of the disperse phase and the concentration and composition of the continuous phase. For the highest concentration, deformability of swollen particles seems to play a prevailing role. Concentrated starch gels also exhibited different elastic properties, depending upon pasting procedure and type of starch. Wheat starch gels were stiffer than maize gels and it was suggested that the main structural parameters involved are the deformability of the swollen particles and the amylose concentration of the continuous network.     

Physicochemical,Thermal, Pasting and Microstructure Properties of Hydroxypropylated Jackfruit Seed Starch Prepared by Etherification with Propylene Oxide

The jackfruit seed starch was subjected to the hydroxypropylation process by using various volumes of propylene oxide in the range of 5–50 ml (HP₅-HP₅₀). It was found that the molecular substitution (MS) increased with the volume of propylene oxide used. The shape of the native starch appeared irregular, round to bell or semi-oval with an average size of 7.66 μm. The modified granules were still intact in granular form without fragmentation. However, the presence of traces of degradation was observed on some starch granules, particularly the treatment of HP₄₀-HP₅₀. No marked differences in the XRD pattern were observed between the native starch and the hydroxypropyl derivatives. However, a decrease in the degree of crystallinity was found as the volume of propylene oxide in the reaction mixture increased. The swelling power and solubility of the hydroxypropylated starches were higher than in the native starch. Progressive increases in swelling power and solubility were observed as the MS increased among the hydroxypropylated starches. The pasting properties revealed that decreases in the pasting temperature, final viscosity and setback was found with increasing MS while the breakdown increased. Hydroxypropylated starches had lower gelatinization parameters (To, Tp, Tc and ?H) compared with the native starch. During refrigerated storage of the starch gel, the native starch showed syneresis from the first cycle while no syneresis was found during seven cycles for the treatment of HP₁₀-HP₅₀.     

Studies on the Cereal Starches

Twenty purified rice starches of domestic and imported rices from eight countries including indica and japonica subspecies were submitted to the test of the chemical compositions, pasting characteristics and dynamic visco-elasticity of cold paste body. High correlations were found between some of these characteristics in which were observed obvious differences among the samples. For characterization of rice starches, the samples were classified in 4 groups, according to the degree of these starch characters, which were roughly expressed as “Sticky type” and “Non-sticky or Flaky type”     

Physicochemical properties of etherified maize starches

The changes in starch properties due to etherification with allyl glycidyl ether (AGE) have been investigated. After etherification of three different starches (containing 0.9%, 27% and 70% amylose), no appreciable differences in granular appearance were observed, but the granule crystallinity of these starches was changed. Furthermore, the incorporation of AGE in the starch significantly affects its physicochemical properties: the gelatinization temperatures were decreased and the pasting properties were altered. Both the swelling power and the solubility index increased as the degree of substitution (DS) increased. The rheology behaviour of the droplets of swollen granules suspension was studied under shear flow conditions.     

Changes in physicochemical properties of waxy corn starches at different stages of harvesting

Starches were isolated from immature waxy corn kernels harvested at 0, 2, 4 and 6 days after optimum stage (DAO) and from mature kernels at 16 DAO. The starch contents showed varied according to genotypes and harvesting stages. The accumulation of starches showed an increasing trend in relation to delayed harvesting time, from the optimum stage until the physiological maturity stage. Among all harvesting stages, medium granules had the highest contribution to the total starch volume (60.8–81.5%), followed by large (5.7–30.1%), and small granules (9.1–15.3%). Average chain length distribution of amylopectin ranged from DP 14.7 to 16.9 for KKU–UB, DP 16.9 to 17.4 for KKU–JD, and DP 5.7 to 30.1 for Violet white. The pasting behaviors of starches were greatly affected by harvesting times. The peak viscosity of starches increased with delayed harvesting until physiological maturity and then decreased until dried kernels at 35 days after pollination.     

Architectural changes of heated mungbean, rice and cassava starch granules: Effects of hydrocolloids and protein-containing envelope

Architectural changes of starch granules induced by heat were demonstrated using light microscopy and confocal laser scanning microscopy. Heat treatment (80 °C, 30 min) on mungbean starch, cassava starch and rice flour suspensions resulted in the rearrangement of amylose and granule-associated proteins within the deformed granules. The presence of alginate and carrageenan influenced the RVA pasting characteristics of starch/flour-hydrocolloid mixed suspensions by maintaining the granular structure of amylose-rich swollen granules or inducing the aggregation of the swollen ones. Generally, the addition of hydrocolloid increased peak viscosity, lowered breakdown and reduced setback of the flour-hydrocolloid mixed paste. This study demonstrated that the heat treatment in excess water generated the protein-containing granule envelope encasing the mungbean and cassava starch content within the deformed granules.     

Preparation of clear noodles with mixtures of tapioca and high-amylose starches

Ways to simulate the making of clear noodles from mung bran starch were investigated by studying the molecular structures of mung bean and tapioca starches. Scanning electron micrographs showed that tapioca starch granules were smaller than those of mung bean starch. X-ray diffraction patterns of mung bean and tapioca starch were A- and C_A-patterns, respectively. Iodine affinity studies indicated that mung bean starch contained 37% of apparent amylose and tapioca starch contained 24%. Gel permeation chromatograms showed that mung bean amylopectin had longer peak chain-length of long-branch chains (DP 40) than that of tapioca starch (DP 35) but shorter peak chain-length of short-branch chains (DP 16) than that of tapioca starch (DP 21). P-31 n.m.r. spectroscopy showed that both starches contained phosphate monoesters, but only mung bean starch contained phospholipids. Physical properties, including pasting viscosity, gel strength, and thermal properties (gelatinization), were determined. The results of the molecular structure study and physical properties were used to develop acceptable products using mixtures of cross-linked tapioca and high-amylose maize starches. Tapioca starch was cross-linked by sodium trimetaphosphate (STMP) with various reaction times, pH values, and temperatures. The correlation between those parameters and the pasting viscosity were studied using a visco/amylograph. Starches, cross-linked with 0.1% STMP, pH 11.0, 3.5 h reaction time at 25, 35, and 45°C (reaction temperature), were used for making noodles. High-amylose maize starch (70% amylose) was mixed at varying ratios (9, 13, 17, 28, 37, and 44%) with the cross-linked tapioca starches. Analysis of the noodles included: tensile strength, water absorption, and soluble loss. Noodle sensory properties were evaluated using trained panelists. Noodles made from a mixture of cross-linked tapioca starch and 17% of a high-amylose starch were comparable to the clear noodles made from mung bean starch.     

The substitution pattern in cationised and oxidised potato starch granules

The distribution pattern of substituents within the granules and the components of two cationised and two oxidised potato starches was studied. The level of crystallinity in wet-cationised (WC) and hypochlorite oxidised (HO) starch granules was similar to that of native starch granules but lower in dry-cationised (DC) and peroxide oxidised (PO) granules. However, the melting temperature of DC granules remained similar to native granules but was decreased in the other samples. With all modified starches, the initial rate of acid hydrolysis (lintnerisation) was increased compared to native granules. The degree of substitution decreased only slightly in WC granules after the lintnerisation, whereas virtually all the substituted glucosyl units in DC starch were hydrolysed already at initial stages. The decrease of substituents in the HO and PO starches was intermediate. The starches were partly resistant to the action of isoamylase and the successive beta-amylolysis, suggesting that substituents were found both close to the branches and near the nonreducing ends in the amylopectin component. It is suggested that the DC starch was preferentially cationised at the surface of the granules, whereas WC and oxidised starches were modified throughout the granules.     

Effect of Hydrothermal Modifications on Functional,Pasting and Structural Properties of False Banana (<Emphasis Type="Italic">Ensete ventricosum</Emphasis>) Starch

Starch extracted from ensete (Ensete ventricosum, Musaceae) also called false banana, was modified by hydrothermal methods of annealing (ANN) and heat moisture treatment (HMT) processes. The effects of treatments on functional, pasting properties, morphology and diffraction pattern of the starch were studied. Swelling power and solubility changed significantly (p < 0.05) with modification. Water absorption (89.3–152.4 %) and oil absorption (105.0–161.3 %) capacities increased significantly (p < 0.05) with ANN and HMT. Alkaline water retention decreased with ANN but increased significantly (p < 0.05) with HMT. Hydrothermal modifications led to reduction in least gelation capacity of ensete starch. In terms of the pasting properties studied, the hydrothermal modifications imparted improved gel strength, increased paste stability, reduced retrogradation tendency and slowed staling rate on ensete starch. Scanning electron micrographs depicted fairly angular and elliptical shapes with diverse sizes for the starch granules. Clustering of granules, mucilage formation, fissures and surface indentation which were gaining prominence with increasing moisture level and temperature of treatment were the hallmarks of modified samples. Native and modified ensete starches showed similar type-B diffraction pattern with maximum peak range of 19.8–20.0^o (2θ). Findings of this work showed that hydrothermally modified ensete starches possess excellent value-added potentials for utilization in pharmaceuticals and food applications.     

Heat–moisture treatment under mildly acidic conditions alters potato starch physicochemical properties and digestibility

Potato starch was subjected to heat–moisture treatment (HMT; 120 °C, 3 h) under mildly acidic conditions (pH 5, 6, or 6.5 [control]) at moisture levels of 15, 20 or 25%. HMT starches exhibited significantly delayed pasting times and reduced overall paste viscosities, amylose leaching, and granular swelling characteristics relative to native starch, as well as enhanced levels of thermo-stable resistant starch (≈24%). HMT appeared to alter/enhance short-range chain associations (FT-IR) within amorphous and/or crystalline regions of starch granules. However, the extent of physicochemical change and RS enhancement during HMT was most facilitated by a mildly acidic condition (pH 6) at higher treatment moisture levels (20 or 25%). These conditions promoted limited hydrolysis of amylopectin molecules, primarily at α-(1 → 6) branch points, likely enhancing mobility and interaction of starch chains during HMT. Thus, a slightly acidic pH might reduce conditions and/or timeframe needed to impart physicochemical changes and reduced digestibility to potato starch.     

Production of very‐high‐amylose cassava by post‐transcriptional silencing of branching enzyme genes

High amylose starch can be produced by plants deficient in the function of branching enzymes (BEs). Here we report the production of transgenic cassava (Manihot esculenta Crantz) with starches containing up to 50% amylose due to the constitutive expression of hair‐pin dsRNAs targeting the BE1 or BE2 genes. All BE1‐RNAi plant lines (BE1i) and BE2‐RNAi plant lines (BE2i) were grown up in the field, but with reduced total biomass production. Considerably high amylose content in the storage roots of BE2i plant lines was achieved. Storage starch granules of BE1i and BE2i plants had similar morphology as wild type (WT), however, the size of BE1i starch granules were bigger than that of WT. Comparisons of amylograms and thermograms of all three sources of storage starches revealed dramatic changes to the pasting properties and a higher melting temperature for BE2i starches. Glucan chain length distribution analysis showed a slight increase in chains of DP>36 in BE1i lines and a dramatic increase in glucan chains between DP 10‐20 and DP>40 in BE2i lines. Furthermore, BE2i starches displayed a B‐type X‐ray diffraction pattern instead of the A‐type pattern found in BE1i and WT starches. Therefore, cassava BE1 and BE2 function differently in storage root starch biosynthesis.