On the appearance of Bacillus subtilis intracellular serine protease in the cell membrane and culture medium

While about 80% of the cell-bound intracellular serine protease of Bacillus subtilis A-50 have been recovered in the soluble fraction upon disruption of cells, the rest of the enzyme was found to be associated with the membrane fraction. Soluble cytoplasmic intracellular serine protease, as well as membrane-bound serine protease liberated by nonionic detergent treatment, have been isolated in a pure state and shown to be identical. The same protease might also be found extracellularly, due presumably to cell lysis or altered membrane permeability. Intracellular serine protease of Bacillus subtilis A-50 was clearly related to Bacillus subtilis serine proteases W1 and bacillopeptidase F described as extracellular enzymes.Abbreviations ISP intracellular serine protease - ISP-A-Bsu A-50 and ISP-B-Bsu A-50 molecular forms A and B of B. subtilis A-50 intracellular serine protease, respectively - SDS sodium dodecyl sulfate - PMSF phenylmethyl sulfonylfluoride - pNA p-nitroanilide - Buffer A 50 mM Tris-(hydroxymethyl)aminomethane-1 mM CaCl₂ adjusted to pH 8.5 with HCl     

Chemical Modification of Neutral Protease from Bacillus subtilis var. amylosacchariticus: Assignment of Tyrosyl Residues Iodinated

The neutral protease of Bacillus subtilis var. amylosacchariticus (B. amylosacchariticus) was iodinated with a 25-fold molar excess of iodine at pH 9.4 for 3 min at 0°C, by which treatment the proteolytic activity toward casein was markedly reduced, while the hydrolytic activity toward an N-blocked peptide substrate was rather increased. The modified enzyme was digested with Staphylococcus aureus V8 protease at pH 8.0 and the amino acid sequences of resultant peptides were compared with those obtained from the native enzyme. One of the peptides was found to have an amino acid sequence of Thr-Ala-Asn-Leu-Ile-Tyr-Glu, which corresponds to residue Nos. 153—159 of the enzyme, where Tyr-158 was identified to be mono-iodotyrosine. The other two peptides were those containing Tyr-21 which was mono- and di-iodinated, respectively. Referring to nitration experiments on the neutral protease and the active site structure of thermolysin, it was concluded that the iodination of Tyr-158 is mainly responsible for the activity changes of B. amylosacchariticus neutral protease.     

Biochemical properties of a serine protease from Aspergillus flavus and application in dehairing

The proteases are enzymes produced by several filamentous fungi with important biotechnological applications. In this work, a protease from Aspergillus flavus was characterized. The culture filtrate of A. flavus was purified to homogeneity by Sephacryl S-200 column chromatography followed by CM–cellulose. The molecular weight of the purified enzyme was estimated to be approximately 32?kDa by SDS–PAGE. The enzyme hydrolysed BTpNA (N-α-benzoyl-dl-tyrosyl-p-nitroanilide), azo-casein and casein as substrates. Optimal temperature and pH were 55?°C and 6.5, respectively. The enzyme was stimulated by Mg²⁺, Ca²⁺, Zn²⁺ and inhibited by Hg²⁺ and Ag²⁺ and Cu²⁺. The protease showed increased activity with detergents, such as Tween 80 and Triton X, and was stable to the reducing agents, such as β-mercaptoethanol. The protease activity was strongly inhibited in the presence of phenylmethylsulfonyl fluoride, indicating it is a serine protease. The enzyme entrapped in calcium alginate beads retained its activity for longer time and could be reused up to 10 times. The thermostability was increased after the immobilization and the enzyme retained 100% of activity at 45?°C after 60?min of incubation, and 90% of residual activity at 50?°C after 30?min. In contrast, the free enzyme only retained 10% of its residual activity after 60?min at 50?°C. The enzymatic preparation was demonstrated to be efficient in the capability of dehairing without destruction of the hide. The remarkable properties such as temperature, pH and immobilization stability found with this enzyme assure that it could be a potential candidate for industrial applications.     

Purification and characterization of a novel trypsin-like protease from green-seeded chickpea (Cicer arientum)

The present study describes the purification and physicochemical and biochemical characterization of trypsin-like protease from green-seeded chickpea (Cicer arientum). The crude extract of chickpea trypsin (CpT) was obtained by homogenization followed by differential ammonium sulfate precipitation. The CpT was purified by ion-exchange chromatography on diethylaminoethyl (DEAE) column, pre-equilibrated with 20?mM tris-CaCl₂ buffer (pH 8.2) with a flow rate of 0.5?mL min^?1. The molecular weight and purity of ～23?kDa of CpT were determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Activity of protease was determined using Nα-benzoyl-DL-arginine-p-nitroanilide as chromogenic substrate and CpT purified showed a specific inhibitor activity of 26978.7697?U?mg^?1, fold purity of 9.8, and the yield of 70.2%. The characterization was performed for thermal stability, pH profile, and effect of various inhibitors on enzymatic activity. The protein isolated showed stability in the neutral to mild alkaline pH range and thermostability up to 50°C. CpT confirmed its serine nature as it was appreciably inhibited by serine protease inhibitors (maximum 6%), whereas metalloprotease inhibitors barely affected the activity of the enzyme (85%). To the best of our knowledge, it is first reported on purification of protease with trypsin-like properties, from this source.     

Studies on Bacterial Protease

The neutral protease of Bacillus amylosacchariticus was inactivated by low concentrations of several metal-chelating agents and the inactivated enzyme with EDTA restored its activity almost completely by the addition of Zn⁺⁺ or Co⁺⁺ and partially by Fe⁺⁺ or Mn⁺⁺, if these metal ions were added shortly after the EDTA-treatment. The native enzyme was found to contain 0.19% of zinc together with a significant amount of calcium. Parallel increase in specific activity and zinc content of enzyme preparation was observed throughout the purification procedure. The elution pattern of enzyme activity on a CM-cellulose column chromatography also completely coincided with that of protein-bound zinc. A zinc-free inactive enzyme was also reactivated by the addition of zinc or cobalt ions, clearly showing that the neutral protease of B. amylosacchariticus is a zinc mctalloenzyme.     

Purification and characterization of a propanol-tolerant neutral protease from Bacillus sp. ZG20

Abstract

A propanol-tolerant neutral protease was purified and characterized from Bacillus sp. ZG20 in this study. This protease was purified to homogeneity with a specific activity of 26,655?U/mg. The recovery rate and purification fold of the protease were 13.7% and 31.5, respectively. The SDS-PAGE results showed that the molecular weight of the protease was about 29?kDa. The optimal temperature and pH of the protease were 45?°C and 7.0, respectively. The protease exhibited a good thermal- and pH stability, and was tolerant to 50% propanol. Mg²⁺, Zn²⁺, K⁺, Na⁺ and Tween-80 could improve its activity. The calculated K_m and V_max values of the protease towards α-casein were 12.74?mg/mL and 28.57?µg/(min mL), respectively. This study lays a good foundation for the future use of the neutral protease from Bacillus sp. ZG20.     

Immunochemical characterization of commercial protease products

Total protease activity at pH 7 and 10.3 of 23 commercial grade enzymes was determined. The type and amount of enzymatic activity varied widely among the products. The wide variation in pH 7.0/pH 10.3 proteolytic activity ratios among products indicated that the products studied contained differing levels of alkaline and neutral proteases. Antisera were prepared against the purified enzyme in detergent grade Enzyme AP, neutral protease from B. megaterium, detergent grade ALK Enzyme, and Thermolysin. The commercial (unpurified) products were classified as neutral subtilopeptidase A and subtilopeptidase B from three Bacillus species using these antisera. It was concluded that standard immunochemical techniques provide rapid and sensitive methods for the preliminary identification of sources and types of proteases present in commercial enzyme products.     

Studies on Bacterial Protease

Some physical and chemical properties and substrate specificity were investigated of the neutral protease obtained from B. amylosacchariticus, a strain of saccharogenic α-amylase producing Bacillus subtilis. The molecular weight and sedimentation coefficient of the protease were estimated to be 33,800 and 3.02, respectively, by ultracentrifugal analyses, and alanine was identified as an amino-terminal amino acid of the enzyme by the Sanger’s method. The enzyme showed more broad specificity than the neutral protease of liquefying α-amylase-producing B. subtilis, when tested with synthetic peptides, and hippuryl-l-leucinamide was the best substrate among 42 compounds tested. On a long incubation, the enzyme hydrolyzed several proteins in a degree of 10 to 25% as peptide bond cleavage.     

Process optimization for production and purification of novel fibrinolytic enzyme from Stenotrophomonas sp. KG-16-3

Intravascular thrombosis is a major cardiovascular complication responsible for high mortality worldwide. Existing thrombolytic agents are expensive and have various side effects. As a consequence, researchers continue to search for better thrombolytic agents. Fibrinolytic proteases especially those of microbial origin are considered as potential therapeutic candidates for thrombosis. The current study reports fibrinolytic protease from a bacterial isolate Stenotrophomonas sp. KG-16-3, as it exhibits high fibrinolytic activity on fibrin agarose plate. Studies on fibrinolytic protease from Stenotrophomonas sp. are lacking. So, a detailed study was conducted for the production and purification of fibrinolytic protease. Optimizing process parameters using the Design of Experiments method enhanced the yield by 1.5-fold. The fibrinolytic enzyme was purified by ammonium sulfate precipitation, ion-exchange and gel-filtration chromatography resulting in 7.1-fold purification and 16.7% yield with specific activity of 383.8?U/mg. The purified enzyme exhibited higher fibrinolytic activity than plasmin and had a molecular weight of 39?kDa. Optimal activity of the enzyme was observed at 50?°C and pH 10. The enzyme exhibited stability up to 60?°C, over pH 7–10 and in the presence of different metal ions and solvents. The activity of the enzyme was significantly reduced in the presence of phenylmethyl sulfonyl fluoride, iodoacetic acid and 1,10-phenanthroline, suggesting that the enzyme belonged to the serine–cysteine metalloprotease category. The present study is the first ever report on the Design of Experiments based optimization of fermentation conditions for the production of fibrinolytic protease from Stenotrophomonas sp.     

Stabilization of proteolytic enzymes in solution

The stability of the neutral and alkaline proteases in a Bacillus subtilis enzyme mixture was studied in aqueous solutions at room temperature. Stabilization of the proteases in solution for periods up to 25 days was achieved by the addition of various protein preparations including casein and soya protein. The degree of stabilization by casein was concentration dependent to about 2% protein. The instability of the neutral protease in solutions of the B. subtilis enzyme mixture was shown to be due primarily to proteolysis by the alkaline protease since the diisopropylfluorophosphate-treated enzyme was quite stable. Formulation of such enzyme solutions at low pH gave greater stability as did solutions containing an alkaline protease inhibitor from potatoes. A Conceptual approach to the formulation of enzyme solutions containing proteolytic enzyme to ensure maximum stability is proposed.     

Enzymatic production of fully deacetylated chitooligosaccharides and their neuroprotective and anti-inflammatory properties

Abstract

Among several commercial enzymes screened for chitosanolytic activity, Neutrase 0.8L (a protease from Bacillus amyloliquefaciens) was selected in order to obtain a product enriched in deacetylated chitooligosaccharides (COS). The hydrolysis of different chitosans with this enzyme was followed by size exclusion chromatography (SEC-ELSD), mass spectrometry (ESI-Q-TOF), and high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Neutrase 0.8L converted 10?g/L of various chitosans into mostly deacetylated oligosaccharides, yielding approximately 2.5?g/L of chitobiose, 4.5?g/L of chitotriose, and 3?g/L of chitotetraose. We found out that the neutral protease was not responsible for the chitosanolytic activity in the extract, while it could participate in the deacetylating process. The synthesized COS were tested in vitro for their neuroprotective (toward human SH-S5Y5 neurons) and anti-inflammatory (in RAW macrophages) activities, and compared with other functional ingredients, namely fructooligosaccharides.     

Purification and Some Properties of a Protease from Streptomyces limosus

Streptomyces limosus was selected because it secreted a novel protease that catalyzed the synthetic reaction forming Pro-Pro-Pro from Pro-Pro. The protease was purified to an electrophoretically homogeneous state and an activity of more than about 20,000-fold that of the culture broth. The molecular mass of the enzyme was estimated to be 50 kDa by SDS-polyacrylamide gel electrophoresis. The enzyme was most active in alkaline pH for the synthetic reaction producing Pro-Pro-Pro from Pro-Pro, although for the hydrolytic reaction forming proline it was most active in neutral pH. The enzyme was inhibited by 1,2-epoxy-3-(p-nitrophenoxy)propane (EPNP) and diazoacetyl-DL-norleucine methyl ester (DAN). It can be considered that this enzyme belongs to the class of aspartic proteases. The substrate specificity indicates that this enzyme has a strong affinity for proline as a N-terminal amino acid of peptides.     

Complete Amino Acid Sequence of Neutral Protease from Bacillus subtilis var. amylosacchariticus

The neutral protease of Bacillus subtilis var. amylosacchariticus was cleaved chemically or digested with proteolytic enzymes, and the resultant peptides were separated and purified by high performance liquid chromatography. The sequence analyses of these peptides by the manual Edman procedure established the complete amino acid sequence of the enzyme. The neutral protease consisted of 300 amino acid residues with Ala and Leu as its amino- and carboxyl-termini, respectively, and the molecular weight was calculated to be 32,633. The sequence was found to be identical to that of B. subtilis 1A72 neutral protease, which was deduced from nucleotide sequencing. Comparison of the sequence with those of other Bacillus proteases revealed that the putative active site amino acid residues, Zn-binding ligands, and two Ca-binding sites were well conserved among them, as compared with those of thermolysin.     

Biochemical analysis of a fibrinolytic enzyme purified from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> strain A1

A fibrinolytic enzyme from Bacillus subtilis strain Al was purified by chromatographic methods, including DEAE Sephadex A-50 column chromatography and Sephadex G-50 column gel filtration. The purified enzyme consisted of a monomeric subunit and was estimated to be approximately 28 kDa in size by SDS-PAGE. The specific activity of the fibrinolytic enzyme was 1632-fold higher than that of the crude enzyme extract. The fibrinolytic activity of the purified enzyme was approximately 0.62 and 1.33 U/ml in plasminogen-free and plasminogen-rich fibrin plates, respectively. Protease inhibitors PMSF, DIFP, chymostatin, and TPCK reduced the fibrinolytic activity of the enzyme to 13.7, 35.7, 15.7, and 23.3%, respectively. This result suggests that the enzyme purified from B. subtilis strain Al was a chymotrypsin-like serine protease. In addition, the optimum temperature and pH range of the fibrinolytic enzyme were 50°C and 6.0–10.0, respectively. The N-terminal amino acid sequence of the purified enzyme was identified as Q-T-G-G-S-I-I-D-P-I-N-G-Y-N, which was highly distinguished from other known fibrinolytic enzymes. Thus, these results suggest a fibrinolytic enzyme as a novel thrombolytic agent from B. subtilis strain Al.     

Highly thermostable neutral protease from Bacillus stearothermophilus

Bacillus stearothermophilus MK232, which produced a highly thermostable neutral protease, was isolated from a natural environment. By several steps of mutagenesis, a hyper-producing mutant strain, YG185, was obtained. The enzyme productivity was twice as much as that of the original strain. This extracellular neutral protease was purified and crystallized. The molecular weight of the enzyme was 34,000 by SDS-polyacrylamide gel electrophoresis and gel filtration. The optimum pH and temperature for the enzyme activity were 7.5 and 70°C, respectively, and the enzyme was stable at pH 5–10 and below 70°C. The thermostability and specific activity of the new protease are around 10% and 40% higher than those of thermolysin (the neutral protease from Bacillus thermoproteolyticus), respectively. The enzyme was inactivated by EDTA, but not by phenylmethylsulfonyl fluoride. These results indicate that the enzyme is a highly thermostable neutral-(metallo)protease.     

Thermostable alkaline protease produced by Bacillus thermoruber — a new species of Bacillus

Summary The proteolytic activity produced by a new species of Bacillus isolated in our laboratory was investigated. This enzyme was purified to homogeneity from cell-free culture liquids of B. thermoruber. The purification procedure included ion-exchange chromatography on DEAE-Sephadex A-50 and -casein agarose affinity chromatography. The protease consists of one polypeptide chain with a molecular weight of 39000±800. the isoelectric point was 5.3; the optimum pH and temperature for proteolytic activity (on casein) was found to be pH 9 and 45°C respectively. Enzyme activity was inhibited by PMSF and EDTA. The stability was considerably increased by addition of Ca²⁺, and the protease exhibited a relatively high thermal stability. The alkaline protease shows a preference for leucine in the carboxylic side of the peptide bond of the substrate. The K _m value for benzyloxycarbonyl-Ala-Ala-Leu-p-nitroanilide was 2.5 mM.     

Studies on Mold Protease

An acid protease of Rhizopus chinensis was purified by sequential chromatographies on columns of Duolite A-2, Sephadex G-100 and CM-cellulose, and crystallized from aqueous acetone solution. The preparation was shown to be monodisperse on column chromatography of ion-exchange sephadex and on ultracentrifugal analysis. The enzyme was most active at pH values between 2.9 and 3.3 and was stable over the range of pH 2.8 to 6.5. The protease was markedly inactivated by ferric ions and sodium lauryl sulfate, whereas it was affected by neither sulfhydryl reagents nor metal-chelating agents. In milk-clotting activity, the acid protease was shown to be one of the most potent enzymes among those of fungal origin. Substrate specificity experiments on several synthetic peptides indicated that the peptide bonds susceptible to the action of the enzyme were mainly those involving amino group of aromatic amino acids.     

Protease production by thermo-alkaliphilic novel gut isolate Kitasatospora cheerisanensis GAP 12.4 from Gryllotalpa africana

In course of searching for proteolytic microbes from the gut of Gryllotalpa africana, a potent isolate GAP 12.4 was screened and identified as Kitasatospora cheerisanensis having protease activity 46.8?±?1.52?U/ml. Optimum conditions for the protease production (605.3?±?9.7?U/ml) were 7-d cultivation, 5% inoculum, pH 9.5, 55?°C, 150?rpm, and supplementation with 0.8% glucose and 0.6% ammonium sulfate. Surfactants such as SDS, EDTA, Tween 80 and Triton X-100 showed positive effect on enzyme production. Addition of biotin (50?μg/ml) promotes enzyme production maximally (674.15?±?4.13?U/ml). Further enhancement on addition of casein hydrolysate and molasses to the production medium was 709.20?±?7.53?U/ml and 744.26?±?9.71?U/ml, respectively. The isolate was also able to utilize agro-industries waste, green gram husk in solid-state fermentation for enzyme production (1675.02?±?21.58?U/ml). This thermo-alkaliphilic isolate may be a potent candidate for low cost protease production through management of agro-residues. It is the first report of protease production by a member of actinobacteria under the Kitasatospora genus.     

Purification and characterization of thermostable cellulase from Enterobacter cloacae IP8 isolated from decayed plant leaf litter

Cellulases are important in the hydrolysis of lignocellulosic materials and thereby contribute to biomass conversion into fuels and chemicals. A cellulase-producing bacterium was isolated from decayed plant leaf litter in soil of a botanical garden. Based on morphological, biochemical and 16S rRNA gene sequencing, it was identified as Enterobacter cloacae IP8, with gene bank accession number NR118568.1. The bacterial cellulase was purified in a three-step procedure using lyophilization, ion exchange chromatography (QAE Sephadex A-50) and gel filtration (Biogel P-100). Two isoforms of the enzyme were purified 1.21 and 1.23 folds, respectively, with yields of 30 and 29% for isoforms A and B, respectively. Apparent molecular weights of 36.61?±?1.40 and 14.1?±?0.10?kDa were obtained for isoforms A and B, respectively, using gel filtration chromatography. Kinetic parameters K_m and V_max were 0.13?±?0.04?mg/ml and 3.84?±?0.05?U/ml/min, respectively, for isoform A and 0.58?±?0.06?mg/ml and 13.8?±?0.10?U/ml/min, respectively, for isoform B. Optimum pH (7.0) and temperature (60?°C) of cellulase activity were determined for both isoforms A and B. Na⁺ and Ca²⁺ enhanced the activities of both isoforms. Mg²⁺ inhibited the enzyme activity at concentrations 4–15?mM but, while it stimulated the activity of isoform A at concentrations 15–200?mM, it inhibited that of isoform B at same concentration range. The strong inhibition of the enzyme by ethylenediaminetetraacetic acid (EDTA) confirmed the enzyme as a metalloenzyme. These results reveal the purified cellulase from E. cloacae IP8 as a thermostable, acidic to neutral metalloenzyme, suggesting that it has good potential for biotechnological applications.     

Purification and characterization of a neutral serine protease from non-sulfur purple photosynthetic bacterium

A neutral serine protease was purified as a homogeneous protein from the culture broth of photosynthetic bacterium T-20 by sequential chromatographies on columns of DEAE-cellulose, Toyopearl HW 55F, hydroxyapatite, and CM-cellulose. The molecular weight was estimated to be approximately 44,000 by SDS-PAGE, while the value of approximately 80,000 was obtained when the Hedrick-Smith method was used; this suggested that the enzyme consists of two identical subunits. The isoelectric point was determined to be 6.3 by isoelectric focusing. The enzyme had a pH optimum at 7.8. Maximal enzyme activity was detected at 50°C, and the activity was stable up to 50°C for 5 min at pH 7.0–7.2. The substrate specificity of the protease was investigated with a series of synthetic peptidyl-p-nitroanilide. The best substrate examined was Suc-Ala-Ala-Pro-Phe-pNA. The protease activity was inhibited by various inhibitors of serine protease such as chymostatin, PMSF, and DFP. EDTA, which is an inhibitor of metal protease, also inhibited the protease activity, whereas inhibitors of thiol and aspartic proteases had no significant effect.