Localized DNA melting and structural pertubations in the origin of replication, oriC, of Escherichia coli in vitro and in vivo.

The leftmost region of the Escherichia coli origin of DNA replication (oriC) contains three tandemly repeated AT-rich 13mers which have been shown to become single-stranded during the early stages of initiation in vitro. Melting is induced by the ATP form of DnaA, the initiator protein of DNA replication. KMnO4 was used to probe for single-stranded regions and altered DNA conformation during the initiation of DNA replication at oriC in vitro and in vivo. Unpairing in the AT-rich 13mer region is thermodynamically stable even in the absence of DnaA protein, but only when divalent cations are omitted from the reaction. In the presence of Mg2+, oriC melting is strictly DnaA dependent. The sensitive region is distinct from that detected in the absence of DnaA as it is located further to the left within the minimal origin. In addition, the DNA is severely distorted between the three 13mers and the IHF binding site in oriC. A change of conformation can also be observed during the initiation of DNA replication in vivo. This is the first in vivo evidence for a structural change at the 13mers during initiation complex formation.     

Drunken-cell footprints: nuclease treatment of ethanol-permeabilized bacteria reveals an initiation-like nucleoprotein complex in stationary phase replication origins.

The nucleoprotein complex formed on oriC, the Escherichia coli replication origin, is dynamic. During the cell cycle, high levels of the initiator DnaA and a bending protein, IHF, bind to oriC at the time of initiation of DNA replication, while binding of Fis, another bending protein, is reduced. In order to probe the structure of nucleoprotein complexes at oriC in more detail, we have developed an in situ footprinting method, termed drunken-cell footprinting, that allows enzymatic DNA modifying reagents access to intracellular nucleoprotein complexes in E.coli, after a brief exposure to ethanol. With this method, we observed in situ binding of Fis to oriC in exponentially growing cells, and binding of IHF to oriC in stationary cells, using DNase I and Bst NI endonuclease, respectively. Increased binding of DnaA to oriC in stationary phase was also noted. Because binding of DnaA and IHF results in unwinding of oriC in vitro, P1 endonuclease was used to probe for intracellular unwinding of oriC. P1 cleavage sites, localized within the 13mer unwinding region of oriC ', were dramatically enhanced in stationary phase on wild-type origins, but not on mutant versions of oriC unable to unwind. These observations suggest that most oriC copies become unwound during stationary phase, forming an initiation-like nucleoprotein complex.     

Ease of DNA unwinding is a conserved property of yeast replication origins.

Autonomously replicating sequence (ARS) elements function as plasmid replication origins. Our studies of the H4 ARS and ARS307 have established the requirement for a DNA unwinding element (DUE), a broad easily-unwound sequence 3' to the essential consensus that likely facilitates opening of the origin. In this report, we examine the intrinsic ease of unwinding a variety of ARS elements using (1) a single-strand-specific nuclease to probe for DNA unwinding in a negatively-supercoiled plasmid, and (2) a computer program that calculates DNA helical stability from the nucleotide sequence. ARS elements that are associated with replication origins on chromosome III are nuclease hypersensitive, and the helical stability minima correctly predict the location and hierarchy of the hypersensitive sites. All well-studied ARS elements in which the essential consensus sequence has been identified by mutational analysis contain a 100-bp region of low helical stability immediately 3' to the consensus, as do ARS elements created by mutation within the prokaryotic M13 vector. The level of helical stability is, in all cases, below that of ARS307 derivatives inactivated by mutations in the DUE. Our findings indicate that the ease of DNA unwinding at the broad region directly 3' to the ARS consensus is a conserved property of yeast replication origins.     

A DNA unwinding element and an ARS consensus comprise a replication origin within a yeast chromosome.

We have defined a replication origin, ORI305, within chromosome III of Saccharomyces cerevisiae by means of mutational analysis. cis-acting elements required for origin activity in the chromosome, as assayed by two-dimensional gel electrophoresis of replication intermediates, are the same as those required for the function of an autonomously replicating sequence, ARS305, in a plasmid. Essential elements include (i) an 11 bp sequence that is a near match to the ARS consensus and (ii) a broad sequence directly 3' to the consensus near match. Origin function is inactivated by point mutations in the essential near match sequence, suggesting that the sequence contributes to specifying the origin in the chromosome. Other consensus near matches with different sequences are present but are not required. The essential 3'-flanking sequence exhibits DNA helical instability and is sensitive to deletion mutations that stabilize the DNA helix. The wild-type 3'-flanking sequence can be functionally substituted by dissimilar sequences that also exhibit helical instability. The requirement for DNA helical instability indicates that the essential 3'-flanking sequence serves as a DNA unwinding element in the chromosome.     

Replication of M13 oriC bacteriophages in Escherichia coli rep mutant is dependent on the cloned Escherichia coli replication origin.

The involvement of the Escherichia coli rep protein in the replication of M13 chimeric deoxyribonucleic acids (DNAs) carrying the E. coli chromosomal DNA replication origin (oriC) has been examined. Previous studies indicate that the cloning of a 3,550-base-pair sequence of chromosomal DNA containing oriC into an M13 vector allows extensive replication of the M13 oriC chimeric DNA in an E. coli rep-3 mutant. We have extended these studies by preparing a 330-base-pair deletion that specifically deletes the oriC sequence in the M13 oriC DNAs, to demonstrate that the replication observed in the rep-3 host is dependent on the cloned origin. Thus, a DNA-unwinding enzyme other than the rep protein may be involved in the strand separation process accompanying replication which initiates at oriC in the M13 oriC chimeric DNAs and in the E. coli chromosome. The rep assay used for assessing the functionality of the cloned oriC is useful for analysis of any rep-independent origin of replication functional in E. coli. A direct selection for a cloned origin of replication is possible in the rep-3 recA56 host. Since the cloned origin is nonessential for propagation of the M13 chimeric phage in a rep+ host, mutations in the cloned origin may be constructed, and the mutant phage may be examined by a simple transductional analysis of the rep-3 recA56 mutant strain.     

A protein that binds to the P1 origin core and the oriC 13mer region in a methylation-specific fashion is the product of the host seqA gene.

The P1 plasmid replication origin P1oriR is controlled by methylation of four GATC adenine methylation sites within heptamer repeats. A comparable (13mer) region is present in the host origin, oriC. The two origins show comparable responses to methylation; negative control by recognition of hemimethylated DNA (sequestration) and a positive requirement for methylation for efficient function. We have isolated a host protein that recognizes the P1 origin region only when it is isolated from a strain proficient for adenine methylation. The substantially purified 22 kDa protein also binds to the 13mer region of oriC in a methylation-specific fashion. It proved to be the product of the seqA gene that acts in the negative control of oriC by sequestration. We conclude that the role of the SeqA protein in sequestration is to recognize the methylation state of P1oriR and oriC by direct DNA binding. Using synthetic substrates we show that SeqA binds exclusively to the hemimethylated forms of these origins forms that are the immediate products of replication in a methylation-proficient strain. We also show that the protein can recognize sequences with multiple GATC sites, irrespective of the surrounding sequence. The basis for origin specificity is primarily the persistence of hemimethylated forms that are over-represented in the natural. DNA preparations relative to controls.     

cis-acting components in the replication origin from ribosomal DNA of Saccharomyces cerevisiae.

The ribosomal DNA (rDNA) repeats of Saccharomyces cerevisiae contain an autonomously replicating sequence (ARS) that colocalizes with a chromosomal origin of replication. We show that a minimal sequence necessary for full ARS function corresponds to a 107-bp rDNA fragment which contains three 10-of-11-bp matches to the ARS consensus sequence. Point mutations in only one of the 10-of-11-bp matches, GTTTAT GTTTT, inactivate the rDNA ARS, indicating that this consensus sequence is essential. A perfect match to a revised ARS consensus is present but not essential. Sequences up to 9 bp 5' from the essential consensus are dispensable. A broad DNA region directly 3' to the essential consensus is required and is easily unwound as indicated by: (i) hypersensitivity to nicking of an approximately 100-bp region by mung bean nuclease in a negatively supercoiled plasmid and (ii) helical instability determined by thermodynamic analysis of the nucleotide sequence. A correlation between DNA helical instability and replication efficiency of wild-type and mutated ribosomal ARS derivatives suggests that a broad region 3' to the essential ARS consensus functions as a DNA unwinding element. Certain point mutations that do not stabilize the DNA helix in the 3' region but reduce ARS efficiency reveal an element distinct from, but overlapping, the DNA unwinding element. The nucleotide sequence of the functionally important constituents in the ARS appears to be conserved among the rDNA repeats in the chromosome.     

Easily unwound DNA sequences and hairpin structures in the Epstein-Barr virus origin of plasmid replication.

The Epstein-Barr virus (EBV) origin of plasmid replication (oriP) includes two known cis-acting components, the dyad symmetry region and the family of repeats. We used P1 nuclease, a single-strand-specific endonuclease, to probe EBV oriP for DNA sequences that are intrinsically easy to unwind on a negatively supercoiled plasmid. Selective nuclease hypersensitivity was detected in the family of repeats on an oriP-containing plasmid and in the dyad symmetry region on a plasmid that lacks the family of repeats, indicating that the DNA in both cis-acting components is intrinsically easy to unwind. The hierarchy of nuclease hypersensitivity indicates that the family of repeats is more easily unwound than the dyad symmetry region, consistent with the hierarchy of helical stability predicted by computer analysis of the DNA sequence. A specific subset of the family of repeats is nuclease hypersensitive, and the DNA structure deduced from nucleotide-level analysis of the P1 nuclease nicks is a cruciform near a single-stranded bubble. The dyad symmetry region unwinds to form a broad single-stranded bubble containing hairpins in the 65-bp dyad sequence. We propose that the intrinsic ease of unwinding the dyad symmetry region, the actual origin of DNA replication, is an important component in the mechanism of initiation.     

Helicase action of dnaB protein during replication from the Escherichia coli chromosomal origin in vitro

Initiation of bidirectional replication from the origin of the Escherichia coli chromosome (oriC) proceeds through stages in which the components of the two replication forks are assembled. From a complex containing proteins dnaA, dnaB, and dnaC bound at oriC, the dnaB helicase moves in both directions to unwind the duplex. In the absence of replication, this unwinding generates a bubble at oriC coated by single strand binding protein. Addition of gyrase allows unwinding to proceed extensively in both directions from oriC at 60 base pairs/s/fork at 37 degrees C. This rate is sharply dependent on temperature and also stimulated by both primase and DNA polymerase III holoenzyme, even in the absence of DNA synthesis. Primer and DNA synthesis are efficient when coupled to template unwinding. DNA synthesis proceeds bidirectionally from oriC at a rate limited by unwinding. With extensive unwinding preceding DNA synthesis, initiations are not limited to oriC.     

The DNA unwinding element in a yeast replication origin functions independently of easily unwound sequences present elsewhere on a plasmid.

We have previously identified a DNA unwinding element (DUE) in autonomously replicating sequences (ARSs) and demonstrated a correlation between single-strand-specific nuclease hypersensitivity of the DUE and ARS-mediated plasmid replication in yeast. The DUE in the H4 ARS is the most easily unwound sequence in a supercoiled DNA molecule, in the context of the Ylp5 plasmid. To determine whether sequences which are more readily unwound than the ARS can influence replication activity, we have inserted such sequences, called 'torsional sinks', into the plasmids at a site distal to the ARS. We show that the torsional sink sequences effect reduction or elimination of the nuclease hypersensitivity of a variety of H4 ARS derivatives. However, we detect no difference in the in vivo replication activity of an individual ARS plasmid with or without a torsional sink. Thus, the function of the DUE in a yeast replication origin is unaffected by easily unwound sequences present elsewhere on the same plasmid.     

A common mechanism for the ATP-DnaA-dependent formation of open complexes at the replication origin

Initiation of chromosomal replication and its cell cycle-coordinated regulation bear crucial and fundamental mechanisms in most cellular organisms. Escherichia coli DnaA protein forms a homomultimeric complex with the replication origin (oriC). ATP-DnaA multimers unwind the duplex within the oriC unwinding element (DUE). In this study, structural analyses suggested that several residues exposed in the central pore of the putative structure of DnaA multimers could be important for unwinding. Using mutation analyses, we found that, of these candidate residues, DnaA Val-211 and Arg-245 are prerequisites for initiation in vivo and in vitro. Whereas DnaA V211A and R245A proteins retained normal affinities for ATP/ADP and DNA and activity for the ATP-specific conformational change of the initiation complex in vitro, oriC complexes of these mutant proteins were inactive in DUE unwinding and in binding to the single-stranded DUE. Unlike oriC complexes including ADP-DnaA or the mutant DnaA, ATP-DnaA-oriC complexes specifically bound the upper strand of single-stranded DUE. Specific T-rich sequences within the strand were required for binding. The corresponding conserved residues of the DnaA ortholog in Thermotoga maritima, an ancient eubacterium, were also required for DUE unwinding, consistent with the idea that the mechanism and regulation for DUE unwinding can be evolutionarily conserved. These findings provide novel insights into mechanisms for pore-mediated origin unwinding, ATP/ADP-dependent regulation, and helicase loading of the initiation complex.     

The structure of the initiation complex at the replication origin, oriC, of Escherichia coli.

Two distinct regions in the replication origin, oriC, of Escherichia coli are separately distorted upon initiation complex formation by the initiator protein DnaA. The AT-rich region in the left part of oriC and the start site region in the right part of oriC. Chemical modification of single-stranded DNA was observed at both regions whereas endonuclease recognition of DNA mini-bulges specifically occurred in the start site region. We show that the helical phasing of binding sites for DnaA protein in oriC is important for origin function. An insertion or deletion of one helical turn between the two rightmost binding sites does not alter the efficiency of replication initiation, whereas all modifications of distance by less or more than one helical turn result in inactivation of oriC. DnaA binding and helical distortions in the AT-rich region as well as in the start site region are not affected in the distance mutants irrespective of their functionality in vivo. We propose a specific compact nucleoprotein structure for the initiation complex.     

Mutations in the CCGTTCACA DnaA box of Mycobacterium tuberculosis oriC that abolish replication of oriC plasmids are tolerated on the chromosome

The origin of replication (oriC) region in some clinical strains of Mycobacterium tuberculosis is a hot spot for IS6110 elements. To understand how clinical strains with insertions in oriC can replicate their DNA, we characterized the oriC regions of some clinical strains. Using a plasmid-based oriC-dependent replication assay, we showed that IS6110 insertions that disrupted the DnaA box sequence CCGTTCACA abolished oriC activity in M. tuberculosis. Furthermore, by using a surface plasmon resonance technique we showed that purified M. tuberculosis DnaA protein binds native but not mutant DnaA box sequence, suggesting that stable interactions of the DnaA protein with the CCGTTCACA DnaA box are crucial for replication of oriC plasmids in vivo. Replacement by homologous recombination of the CCGTTCACA DnaA box sequence of the laboratory strain M. tuberculosis H37Ra with a mutant sequence did not result in nonviability. Together, these results suggest that M. tuberculosis strains have evolved mechanisms to tolerate mutations in the oriC region and that functional requirements for M. tuberculosis oriC replication are different for chromosomes and plasmids.     

Helicobacter pylori oriC��the first bipartite origin of chromosome replication in Gram-negative bacteria

Binding of the DnaA protein to oriC leads to DNA melting within the DNA unwinding element (DUE) and initiates replication of the bacterial chromosome. Helicobacter pylori oriC was previously identified as a region localized upstream of dnaA and containing a cluster of DnaA boxes bound by DnaA protein with a high affinity. However, no unwinding within the oriC sequence has been detected. Comprehensive in silico analysis presented in this work allowed us to identify an additional region (oriC2), separated from the original one (oriC1) by the dnaA gene. DnaA specifically binds both regions, but DnaA-dependent DNA unwinding occurs only within oriC2. Surprisingly, oriC2 is bound exclusively as supercoiled DNA, which directly shows the importance of the DNA topology in DnaA-oriC interactions, similarly as previously presented only for initiator-origin interactions in Archaea and some Eukaryota. We conclude that H. pylori oriC exhibits bipartite structure, being the first such origin discovered in a Gram-negative bacterium. The H. pylori mode of initiator-oriC interactions, with the loop formation between the subcomplexes of the discontinuous origin, resembles those discovered in Bacillus subtilis chromosome and in many plasmids, which might suggest a similar way of controlling initiation of replication.     

Topological characterization of the DnaA-oriC complex using single-molecule nanomanipuation

In most bacteria, the timing and synchrony of initiation of chromosomal replication are determined by the binding of the AAA(+) protein DnaA to a set of high- and low-affinity sites found within the origin of chromosomal replication (oriC). Despite the large amount of information on the role and regulation of DnaA, the actual structure of the DnaA-oriC complex and the mechanism by which it primes the origin for the initiation of replication remain unclear. In this study, we have performed magnetic tweezers experiments to investigate the structural properties of the DnaA-oriC complex. We show that the DnaA-ATP-oriC complex adopts a right-handed helical conformation involving a variable amount of DNA and protein whose features fit qualitatively as well as quantitatively with an existing model based on the crystal structure of a truncated DnaA tetramer obtained in the absence of DNA. We also investigate the topological effect of oriC's DNA unwinding element.     

Mutant DnaA proteins defective in duplex opening of oriC, the origin of chromosomal DNA replication in Escherichia coli

We characterized three mutant DnaA proteins with an amino acid substitution of R334H, R342H and E361G that renders chromosomal replication cold (20 degrees C) sensitive. Each mutant DnaA protein was highly purified from overproducers, and replication activities were assayed in in vitro oriC replication systems. At 30 degrees C, all three mutant proteins exhibited specific activity similar to that seen with the wild-type protein, whereas at 20 degrees C, there was much less activity in a replication system using a crude replicative extract. Regarding the affinity for ATP, the dissociation rate of bound ATP and binding to oriC DNA, the three mutant DnaA proteins showed a capacity indistinguishable from that of the wild-type DnaA protein. Activity for oriC DNA unwinding of the two mutant DnaA proteins, R334H and R342H, was more sensitive to low temperature than that of the wild-type DnaA protein. We propose that R334H and R342H have a defect in their potential to unwind oriC DNA at low temperatures, the result being the cold-sensitive phenotype in oriC DNA replication. The two amino acid residues of DnaA protein, located in a motif homologous to that of NtrC protein, may play a role in the formation of the open complex. The E361 residue may be related to interaction with another protein present in a crude cell extract.     

Stoichiometry of DnaA and DnaB protein in initiation at the Escherichia coli chromosomal origin

Initiation of DNA replication at the Escherichia coli chromosomal origin, oriC, occurs through an ordered series of events that depend first on the binding of DnaA protein, the replication initiator, to DnaA box sequences within oriC followed by unwinding of an AT-rich region near the left border. The prepriming complex then forms, involving the binding of DnaB helicase at oriC so that it is properly positioned at each replication fork. We assembled and isolated the prepriming complexes on an oriC plasmid, then determined the stoichiometries of proteins in these complexes by quantitative immunoblot analysis. DnaA protein alone binds to oriC with a stoichiometry of 4-5 monomers per oriC DNA. In the prepriming complex, the stoichiometries are 10 DnaA monomers and 2 DnaB hexamers per oriC plasmid. That only two DnaB hexamers are bound, one for each replication fork, suggests that the binding of additional molecules of DnaA in forming the prepriming complex restricts the loading of additional DnaB hexamers that can bind at oriC.     

Herpes simplex virus origin-binding protein (UL9) loops and distorts the viral replication origin.

To investigate the role of the herpes simplex virus origin-binding protein (UL9) in the initiation of DNA replication, we have examined the effect of UL9 binding on the structure of the viral origin of replication. UL9 loops and alters the DNA helix of the origin regardless of the phasing of the binding sites. DNase I and micrococcal nuclease footprinting show that UL9 binds two sites in the origin and loops the AT-rich DNA between them independent of the topology of the DNA. KMnO4 and dimethyl sulfate footprinting further show that UL9 alters the DNA helix in the AT region. In contrast to the looping reaction, however, helical distortion requires the free energy of supercoiled DNA. UL9 also loops and distorts the origin DNA of a replication-defective mutant with a 6-bp insertion in the AT region. Because the helical distortion of this mutant DNA is different from that of functional origins, we conclude that an imperfect tertiary structure of the mutant DNA may contribute to its loss of replication function.