Simultaneous measurement of optical rotation dispersion and absorption spectra for chiral substances

We present a new method based on optical null methods for simultaneously measuring the optical rotatory dispersion (ORD) and absorption spectra of chiral substances. The optical rotation angle at a specific wavelength can be obtained from the optical nulls of the Malus curves with and without the sample. We use the optical nulls of the two curves as benchmark points and the readings to the right of the benchmark points by a certain angular offset to eliminate the influence of the analyzer on the light intensity and obtain the absorbance of the chiral substance at a specific wavelength. The 4096 pixels of the line scan CCD can measure multiple wavelengths simultaneously so that continuous ORD and absorption spectra can be obtained. The experimental results show that the standard deviation of the specific optical rotation is 0.11 deg mL g⁻¹ dm⁻¹, the standard deviation of the maximum absorption wavelength is 0.45 nm, and that absorbance of the sample varies linearly with the concentration. This method is helpful for simplifying the experiment and has a profound influence on the analysis of the contents and molecular configurations of chiral substances in the future.     

Cultured human keratinocytes for optical transmission measurement

The challenges of measuring optical properties of human tissues include the thickness of the sample, homogenization, or crystallization from freezing of the tissue. This investigation demonstrates a method to avoid these problems by growing optically thin samples of human keratinocytes as a substitute for ex vivo epidermis samples. Several methods of growth were investigated. Resulting samples were measured on a spectrophotometer for transmission between 300 nm and 2600 nm. The efficacy of the cell growth was confirmed with histological examination of several cultured keratinocyte samples. Limitations were the requirement to measure samples immediately after removal from the incubation environment, and the absence of the irregular structures of normal skin such as hair and glands. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Protocols for the analysis of theoretical optical rotations

The availability of sophisticated quantum mechanical methods for predicting molecular optical rotations has revolutionized the determination of molecular stereochemistry. However, the objectives and approaches used for the applications of optical rotation vary from one laboratory to the other. With the number of applications of optical rotation increasing at an unprecedented rate, it is considered necessary to discuss the protocols for the general use of optical rotations predicted with quantum mechanical methods. A summary of the quantum mechanical methods for predicting optical rotations and protocols for the use of predicted optical rotations are presented in this article.     

Targeted optical injection of gold nanoparticles into single mammalian cells

We present an all optical technique for the targeted delivery of single 100 nm diameter gold nanoparticles into a specified region of the interior of an individual mammalian cell through a combination of optical tweezing and optical injection. The internalisation of the nanoparticle is verified by confocal laser scanning microscopy and confocal laser scanning reflectance microscopy. This represents the first time that nano sized particles have been tweezed and optically injected into mammalian cells using only light, and provides a novel methodology for internalising nanosphere based biosensors within specific intracellular regions of a mammalian cell. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optimized skin optical clearing for optical coherence tomography monitoring of encapsulated drug delivery through the hair follicles

Hair follicles (HF) represent a drug delivery reservoir for improved treatment of skin disorders. Although various particulate systems play an important role in HF‐targeting, their optical monitoring in skin is challenging due to strong light scattering. Optical clearing is an effective approach allowing the increasing of particle detection depth in skin. The enhancement of optical probing depth (OPD) and optical detection depth (ODD) of particle localization using optical coherence tomography (OCT) was evaluated under application of various optical clearing agents (OCAs) together with skin permeability enhancers ex vivo in rats. Efficient OPD increasing was demonstrated for all investigated OCAs. However, skin dehydration under action of hyperosmotic agents led to the worsening of OCT‐contrast in dermis decreasing the ODD. Lipophilic agents provided optical clearing of epidermis without its dehydration. The highest ODD was obtained at application of a PEG‐400/oleic acid mixture. This OCA was tested in vivo showing beneficial ODD and OPD enhancement.     

Imaging depth extension of optical coherence tomography in rabbit eyes using optical clearing agents

Optical coherence tomography has become an indispensable diagnostic tool in ophthalmology for imaging the retina and the anterior segment of the eye. However, the imaging depth of optical coherence tomography is limited by light attenuation in tissues due to optical scattering and absorption. In this study of rabbit eye both ex vivo and in vivo, optical coherence tomography imaging depth of the anterior and posterior segments of the eye was extended by using optical clearing agents to reduce multiple scattering. The sclera, the iris, and the ciliary body were clearly visualized by direct application of glycerol at an incision on the conjunctiva, and the posterior boundary of sclera and even the deeper tissues were detected by submerging the posterior segment of eye in glycerol solution ex vivo or by retro-bulbar injection of glycerol in vivo. The ex vivo rabbit eyes recovered to their original state in 60 s after saline-wash treatment, and normal optical coherence tomography images of the posterior segment of the sample eyes proved the self-recovery of in vivo performance. Signal intensities of optical coherence tomography images obtained before and after glycerol treatment were compared to analysis of the effect of optical clearing. To the best of our knowledge, this is the first study for imaging depth extension of optical coherence tomography in both the anterior and posterior segments of eye by using optical clearing agents.     

Development of a Virtual Spectrometer for Chiroptical Spectroscopies: The Case of Nicotine

The impressive advances of computational spectroscopy in most recent years are providing robust and user‐friendly multifrequency virtual spectrometers, which can also be used by nonspecialists to complement experimental studies. At the heart of these developments there are latest‐generation models based on Density Functional Theory for the proper treatment of stereo‐electronic effects, coupled to the polarizable continuum model to deal with bulk solvent effects, and low‐order perturbative treatments of anharmonic effects. Continuing our efforts to increase the range of application of virtual spectrometers, we report here about chiroptical spectroscopies with special reference to optical rotation and vibrational circular dichroism. The capabilities and possible limitations of our latest tool will be analyzed for the specific case of (S)‐nicotine in vacuo and in different solvents. Chirality 25:701–708, 2013. © 2013 Wiley Periodicals, Inc.     

Comparisons of optical pH and dissolved oxygen sensors with traditional electrochemical probes during mammalian cell culture

Small-scale upstream bioprocess development often occurs in flasks and multi-well plates. These culturing platforms are often not equipped to accurately monitor and control critical process parameters; thus they may not yield conditions representative of manufacturing. In response, we and others have developed optical sensors that enable small-scale process monitoring. Here we have compared two parameters critical to control in industrial cell culture, pH and dissolved oxygen (DO), measured with our optical sensors versus industrially accepted electrochemical probes. For both optical sensors, agreement with the corresponding electrochemical probe was excellent. The Pearson Correlations between the optical sensors and electrochemical probes were 98.7% and 99.7%, for DO and pH, respectively. Also, we have compared optical pH sensor performance in regular (320 mOsm/kg) and high-osmolality (450 mOsm/kg) cell culture media to simulate the increase in osmolality in pH-controlled cultures. Over a pH range of 6.38-7.98 the average difference in pH readings in the two media was 0.04 pH units. In summary, we have demonstrated that these optical sensors agree well with standard electrochemical probes. The accuracy of the optical probes demonstrates their ability to detect potential parameter drift that could have significant impact on growth, production kinetics, and protein product quality. We have also shown that an increase in osmolality that could result from controlling pH or operating the reactor in fed-batch mode has an insignificant impact on the functionality of the pH patches.     

Real-time monitoring of shake flask fermentation and off gas using triple disposable noninvasive optical sensors

Bioprocess development is a data-driven process requiring a large number of experiments to be conducted under varying conditions. Small-scale upstream bioprocess development is often performed in shake flasks because they are inexpensive and can be operated in parallel. However, shake flasks are often not equipped to accurately monitor critical process parameters such as pH, dissolved oxygen, and CO2 concentrations. Therefore, there is no definitive information on oxygen supply of growing cells, CO2 formation, and pH changes. Here we describe several shake flask fermentations where all three parameters are monitored by disposable noninvasive optical sensors. The sensitive element of these sensors is a thin, luminescent patch affixed inside the flask. Small electronic devices for excitation and fluorescence detection are positioned outside the shake flask for noninvasive monitoring. By measuring the process parameters throughout the course of the E. coli fermentations, we obtain information that is not routinely available in shake flask fermentations. For example, for cultures with only a few millimeters liquid depth, oxygen limitation can occur at relatively low agitation speeds. Under certain conditions oscillations in dissolved oxygen can occur. An increase in shaker speed and a decrease in culture volume can increase the oxygen availability and reduce the duration of oxygen limitation.     

Optimization of dilution rate, pH and oxygen supply on optical purity of 2, 3-butanediol produced by Paenibacillus polymyxa in chemostat culture

The optimum dilution rate for 2, 3-butanediol (BDL) production by Paenibacillus polymyxa was 0.2 h1 and the optical purity of BDL remained above 98 % at all dilution rates. With decreasing culture pH, ethanol and BDL production increased, whereas the optical purity of BDL decreased to 94 % at pH 5.7. In the chemostat culture at pH 6.3 and a 0.1 h1 dilution rate, the optimum air supply for BDL production was 200 ml min–1 in which the O2 uptake rate was 6.7 mmol l–1 h–1. Under this condition, the optical purity of BDL decreased to 93 %. © Rapid Science Ltd. 1998     

Continuous pH monitoring in a perfused bioreactor system using an optical pH sensor

Monitoring and regulating the pH of the solution in a bioprocess is one of the key steps in the success of bioreactor operation. An in-line optical pH sensor, based on the optical absorption properties of phenol red present in the medium, was developed and tested in this work for use in NASA space bioreactors based on a rotating wall-perfused vessel system supporting a baby hamster kidney (BHK-21) cell culture. The sensor was tested over three 30-day and one 124-day cell runs. The pH sensor initially was calibrated and then used during the entire cell culture interval. The pH reported by the sensor was compared to that measured by a fiber optically coupled Shimadzu spectrophotometer and a blood gas analyzer. The maximum standard error of prediction for all the four cell runs for development pH sensor against BGA was +/-0.06 pH unit and for the fiber optically coupled Shimadzu spectrophotometer against the blood gas analyzer was +/-0.05 pH unit. The pH sensor system performed well without need of recalibration for 124 days.     

Broadband spectral verification of optical clearing reversibility in lung tissue

The increase of tissue transparency through sequential optical immersion clearing treatments and treatment reversibility have high interest for clinical applications. To evaluate the clearing reversibility in a broad spectral range and the magnitude of the transparency created by a second treatment, the present study consisted on measuring the spectral collimated transmittance of lung tissues during a sequence of two treatments with electronic cigarette (e-cig) fluid, which was intercalated with an immersion in saline. The saline immersion clearly reverted the clearing effect in the lung tissue in the spectral range between 220 and 1000 nm. By a later application of a second treatment with the e-cig fluid, the magnitude of the optical clearing effect was observed to be about the double as the one observed in the first treatment, showing that the molecules of the optical clearing agent might have converted some bound water into mobile water during the first treatment.     

Confocal scanning optical microscopy and three-dimensional imaging

Summary— Confocal scanning optical microscopy has significant advantages over conventional fluorescence microscopy: it rejects the out-of-locus light and provides a greater resolution than the wide-field microscope. In laser scanning optical microscopy, the specimen is scanned by a diffraction-limited spot of laser light and the fluorescence emission (or the reflected light) is focused onto a photodetector. The imaged point is then digitized, stored into the memory of a computer and displayed at the appropriate spatial position on a graphic device as a part of a two-dimensional image. Thus, confocal scanning optical microscopy allows accurate non-invasive optical sectioning and further three-dimensional reconstruction of biological specimens. Here we review the recent technological aspects of the principles and uses of the confocal microscope, and we introduce the different methods of three-dimensional imaging.     

Theoretical study of the Raman optical activity spectra of with M = Co,Rh

Vibrational Raman optical activity (ROA) spectra were calculated under off-resonance, near-resonance, and at-resonance conditions for ( A ) and under off-resonance conditions for ( B ) using a new driver software for calculating the ROA intensities from complex (damped) time-dependent linear response Kohn-Sham theory. The off-resonance spectra of A and B show many similarities. At an incident laser wavelength of 532 nm, used in commercial ROA spectrometers, the spectrum of A is enhanced by near-resonance with the ligand-field transitions of the complex. The near-resonance spectrum exhibits many qualitative differences compared with the off-resonance case, but it remains bi-signate. Even under full resonance with the ligand-field electronic transitions, the ROA spectrum of A remains bi-signate when the electronic transitions are broadened such as to yield absorption line widths that are comparable with those in the experimental UV-vis absorption and electronic circular dichroism spectra.     

Fluorescence optical detection in situ for real‐time monitoring of cytochrome P450 enzymatic activity of liver cells in multiple microfluidic devices

We describe an in situ fluorescence optical detection system to demonstrate real‐time and non‐invasive detection of reaction products in a microfluidic device while under perfusion within a standard incubator. The detection system is designed to be compact and robust for operation inside a mammalian cell culture incubator for quantitative detection of fluorescent signal from microfluidic devices. When compared to a standard plate reader, both systems showed similar biphasic response curves with two linear regions. Such a detection system allows real‐time measurements in microfluidic devices with cells without perturbing the culture environment. In a proof‐of‐concept experiment, the cytochrome P450 1A1/1A2 activity of a hepatoma cell line (HepG2/C3A) was monitored by measuring the enzymatic conversion of ethoxyresorufin to resorufin. The hepatoma cell line was embedded in Matrigel^TM construct and cultured in a microfluidic device with medium perfusion. The response of the cells, in terms of P450 1A1/1A2 activity, was significantly different in a plate well system and the microfluidic device. Uninduced cells showed almost no activity in the plate assay, while uninduced cells in Matrigel^TM with perfusion in a microfluidic device showed high activity. Cells in the plate assay showed a significant response to induction with 3‐Methylcholanthrene while cells in the microfluidic device did not respond to the inducer. These results demonstrate that the system is a potentially useful method to measure cell response in a microfluidic system. Biotechnol. Bioeng. 2009; 104: 516–525 © 2009 Wiley Periodicals, Inc.     

Enhancement of optical coherence microscopy in turbid media by an optical parametric amplifier

We report the enhancement in imaging performance of a spectral‐domain optical coherence microscope (OCM) in turbid media by incorporating an optical parametric amplifier (OPA). The OPA provides a high level of optical gain to the sample arm, thereby improving the signal‐to‐noise ratio of the OCM by a factor of up to 15 dB. A unique nonlinear confocal gate is automatically formed in the OPA, which enables selective amplification of singly scattered (ballistic) photons against the multiply‐scattered light background. Simultaneous enhancement in both imaging depth and spatial resolution in imaging microstructures in highly light‐scattering media are demonstrated with the combined OPA‐OCM setup.

Typical OCM inteferograms (left) and images (right) without and with OPA.     

Quantifying dental biofilm growth using cross-polarization optical coherence tomography

Aims: Quantifying the ex vivo growth of complex multispecies dental biofilms using cross‐polarization 1310‐nm optical coherence tomography (CP‐OCT) system was investigated. Methods and Results: Bacterial microcosms, which were derived from plaque samples of paediatric subjects, were incubated in a biofilm reactor system containing discs of different dental materials for 72 h with daily sucrose pulsing (5×). CP‐OCT analysis of biofilm mass was validated with crystal violet (CV) assays at various growth stages of these complex biofilms. CP‐OCT was able to filter out the back‐reflected signals of water layers in the hydrated biofilm and allowed for direct biofilm quantification. The overall depth‐resolved scattering intensity of the biofilm showed very strong positive correlation with CV assay quantification (Spearman’s ρ = 0·92) during the growth phase of the biofilm. Conclusion: CP‐OCT was able to quantify the mass of the biofilm by measuring the overall depth‐resolved scattering of the biofilm. Significance and Impact of the Study: CP‐OCT has the ability to nondestructively monitor biofilm growth and elucidate the growth characteristics of these microcosms on different dental material compositions.     

Monitoring growth of Escherichia coli using a two-channel optical sensor

Summary The growth of Escherichia coli strain TG 1 was monitored, measuring simultaneously the culture fluorescence and the 360° reflection at 578 nm with a two-channel optical sensor. It was observed that the culture fluorescence at 366 nm excitation was approximately three times higher than the NADH fluorescence of washed E. coli cells whereas the 360° reflection at 578 nm was comparable. The reason for this effect was found to be the accumulation of riboflavin in the cultivation liquid of the E. coli cells being equal to approximately 0.05 mg/g biomass. In shaken batch cultivations of the same strain the amount of riboflavin in the cell-free cultivation liquid correlated with the biomass being a very sensitive indicator of E. coli growth.Correspondence to: W. S. Kunz     

Facile fabrication of gelatin‐based biopolymeric optical waveguides

The rapid development in optical detection techniques for sensing applications has led to an increased need for biocompatible, biodegradable, and disposable optical components. We present a controllable fabrication technique for an entirely biopolymeric planar optical waveguide via simple spin‐coating. The refractive index difference, thermal responsive properties, and inherent biocompatibility of gelatin and agarose were exploited in the fabrication of thin, stacked films that efficiently guide light in a core layer with higher index of refraction. These planar waveguides were fabricated using a simple spin‐coating technique, which resulted in controllable layer thicknesses and smooth layer interfaces. This technique, therefore, offers a path for routine engineering of biopolymer structures with contrasting refractive indices. The thermal stability of the gelatin core layer was improved using two crosslinkers; glutaraldehyde or microbial Transglutaminase. Light guiding in the core layer of the waveguide was demonstrated using a simple He–Ne laser setup. Guiding efficiency was further illustrated by directly embedding fluorescent markers within the core layer and detecting their spectral signature. Combined with the biopolymers' inherent biocompatibility and biodegradability, our simple strategy to fabricate disposable optical components holds the potential for the development of applications in biological sensing and implantable biomedical devices. Biotechnol. Bioeng. 2009;103: 725–732. © 2009 Wiley Periodicals, Inc.     

细胞表面电荷的光镊测量方法及应用研究

分析了细胞表面电荷测量的意义、方法和现状,提出采用光镊技术测量细胞表面电荷的方法,介绍了实现该方法的系统构成和检测原理。在电场力的作用下,处于悬浮液中的带电细胞产生电泳。在外加电场力为零时利用激光的陷阱力捕获该细胞,然后施加并逐渐加大外加电场力,直到细胞刚好逃脱光阱力的束缚时的瞬间光阱力,理论上就是细胞所带电荷在电场中产生的库仑力与粘滞力之和。