Purification and characterization of a bacteriocin produced by Lactobacillus acidophilus IBB 801

Lactobacillus acidophilus IBB 801 produces a small bacteriocin, designated acidophilin 801, with an estimated molecular mass of less than 6.5 kDa. It displays a narrow inhibitory spectrum (only related lactobacilli but including the Gram-negative pathogenic bacteria Escherichia coli Row and Salmonella panama 1467) with a bactericidal activity. The antimicrobial activity of cell-free culture supernatant fluid was insensitive to catalase but sensitive to proteolytic enzymes such as trypsin, proteinase K and pronase, heat-stable (30 min at 121 degrees C), and maintained in a wide pH range. The proteinaceous compound was isolated from cell-free culture supernatant fluid and purified. Crude bacteriocin was isolated as a floating pellicle after ammonium sulphate precipitation (40% saturation) and partially purified by extraction/precipitation with chloroform/methanol (2/1, v/v). Further purification to homogeneity was performed by reversed phase Fast Performance Liquid Chromatography. The amino acid composition was determined. Amino acid sequencing revealed that the N-terminal end was blocked.     

The curing agent sodium nitrite,used in the production of fermented sausages,is less inhibiting to the bacteriocin-producing meat starter culture Lactobacillus curvatus LTH 1174 under anaerobic conditions

Curvacin A is a listericidal bacteriocin produced by Lactobacillus curvatus LTH 1174, a strain isolated from fermented sausage. The response of this strain to an added curing agent (sodium nitrite) in terms of cell growth and bacteriocin production was investigated in vitro by laboratory fermentations with modified MRS broth. The strain was highly sensitive to nitrite; even a concentration of 10 ppm of curing agent inhibited its growth and both volumetric and specific bacteriocin production. A meat simulation medium containing 5 ppm of sodium nitrite was tested to investigate the influence of the gas phase on the growth and bacteriocin production of L. curvatus LTH 1174. Aerating the culture during growth had no effect on biomass formation, but the oxidative stress caused a higher level of specific bacteriocin production and led to a metabolic shift toward acetic acid production. Anaerobic conditions, on the other hand, led to an increased biomass concentration and less growth inhibition. Also, higher maximum volumetric bacteriocin activities and a higher level of specific bacteriocin production were obtained in the presence of sodium nitrite than in fermentations under aerobic conditions or standard conditions of air supply. These results indicate that the inhibitory effect of the curing agent is at least partially masked under anaerobic conditions.     

The Curing Agent Sodium Nitrite, Used in the Production of Fermented Sausages, Is Less Inhibiting to the Bacteriocin-Producing Meat Starter Culture Lactobacillus curvatus LTH 1174 under Anaerobic Conditions

Curvacin A is a listericidal bacteriocin produced by Lactobacillus curvatus LTH 1174, a strain isolated from fermented sausage. The response of this strain to an added curing agent (sodium nitrite) in terms of cell growth and bacteriocin production was investigated in vitro by laboratory fermentations with modified MRS broth. The strain was highly sensitive to nitrite; even a concentration of 10 ppm of curing agent inhibited its growth and both volumetric and specific bacteriocin production. A meat simulation medium containing 5 ppm of sodium nitrite was tested to investigate the influence of the gas phase on the growth and bacteriocin production of L. curvatus LTH 1174. Aerating the culture during growth had no effect on biomass formation, but the oxidative stress caused a higher level of specific bacteriocin production and led to a metabolic shift toward acetic acid production. Anaerobic conditions, on the other hand, led to an increased biomass concentration and less growth inhibition. Also, higher maximum volumetric bacteriocin activities and a higher level of specific bacteriocin production were obtained in the presence of sodium nitrite than in fermentations under aerobic conditions or standard conditions of air supply. These results indicate that the inhibitory effect of the curing agent is at least partially masked under anaerobic conditions.     

Bacteriocin production with Lactobacillus amylovorus DCE 471 is improved and stabilized by fed-batch fermentation

Amylovorin L471 is a small, heat-stable, and hydrophobic bacteriocin produced by Lactobacillus amylovorus DCE 471. The nutritional requirements for amylovorin L471 production were studied with fed-batch fermentations. A twofold increase in bacteriocin titer was obtained when substrate addition was controlled by the acidification rate of the culture, compared with the titers reached with constant substrate addition or pH-controlled batch cultures carried out under the same conditions. An interesting feature of fed-batch cultures observed under certain culture conditions (constant feed rate) is the apparent stabilization of bacteriocin activity after obtaining maximum production. Finally, a mathematical model was set up to simulate cell growth, glucose and complex nitrogen source consumption, and lactic acid and bacteriocin production kinetics. The model showed that bacterial growth was dependent on both the energy and the complex nitrogen source. Bacteriocin production was growth associated, with a simultaneous bacteriocin adsorption on the producer cells dependent on the lactic acid accumulated and hence the viability of the cells. Both bacteriocin production and adsorption were inhibited by high concentrations of the complex nitrogen source.     

Bacteriocin Production with Lactobacillus amylovorus DCE 471 Is Improved and Stabilized by Fed-Batch Fermentation

Amylovorin L471 is a small, heat-stable, and hydrophobic bacteriocin produced by Lactobacillus amylovorus DCE 471. The nutritional requirements for amylovorin L471 production were studied with fed-batch fermentations. A twofold increase in bacteriocin titer was obtained when substrate addition was controlled by the acidification rate of the culture, compared with the titers reached with constant substrate addition or pH-controlled batch cultures carried out under the same conditions. An interesting feature of fed-batch cultures observed under certain culture conditions (constant feed rate) is the apparent stabilization of bacteriocin activity after obtaining maximum production. Finally, a mathematical model was set up to simulate cell growth, glucose and complex nitrogen source consumption, and lactic acid and bacteriocin production kinetics. The model showed that bacterial growth was dependent on both the energy and the complex nitrogen source. Bacteriocin production was growth associated, with a simultaneous bacteriocin adsorption on the producer cells dependent on the lactic acid accumulated and hence the viability of the cells. Both bacteriocin production and adsorption were inhibited by high concentrations of the complex nitrogen source.     

Mathematical evaluation of plantaricin formation supports an auto-induced production mechanism

The production rate of a bacteriocin, produced by Lactobacillus plantarum TMW1.25 and previously named plantaricin1.25, was studied during pH-constant batch fermentations under various growth media conditions. The growth of L. plantarum and production of bacteriocin during the retardation phase were modelled, using 11 different empirical and mechanistic approaches. The optimal pH for bacteriocin production was 4.5. Among the different nitrogen sources tested, yeast extract was the most important, on the basis of the fact that the maximum growth rate decreased 16% without yeast extract, and only 7.2% or 8.1% without meat extract or peptone respectively. However, the change of nitrogen source did not have a significant effect on bacteriocin production. The progression of plantaricin1.25 production during the retardation phase and growth of L. plantarum TMW1.25 could be described by a structured model in which the bacteriocin concentration induces its own production. Among those models not implementing bacteriocin induction, only the one with an exponential increase of bacteriocin yield per unit biomass was suitable to describe bacteriocin production. Computer-aided evaluation of experimental data appears to be helpful in elucidating the relationship between the growth of lactic acid bacteria and bacteriocin production. Received: 22 May 1998 / Received last revision: 9 November 1998 / Accepted: 14 November 1998     

Influence of growth conditions on the production of a nisin-like bacteriocin by Lactococcus lactis subsp. lactis A164 isolated from kimchi

The influence of growth parameters on the fermentative production of a nisin-like bacteriocin by Lactococcus lactis subsp. lactis A164 isolated from kimchi was studied. The bacteriocin production was greatly affected by carbon and nitrogen sources. Strain A164 produced at least 4-fold greater bacteriocin in M17 broth supplemented with lactose than other carbon sources. The amount of 3% yeast extract was found to be the optimal organic nitrogen source. While the maximum biomass was obtained at 37 degrees C, the optimal temperature for the bacteriocin production was 30 degrees C. The bacteriocin production was also affected by pH of the culture broth. The optimal pH for growth and bacteriocin production was 6.0. Although the cell growth at pH 6.0 was nearly the same level at pH 5.5 and 6.5, the greater bacteriocin activity was observed at pH 6.0. Exponential growth took place only during an initial period of the cultivation, and then linear growth was observed. Linear growth rates increased from 0.160 g(DCW) x l(-1) x h(-1) to 0.245 g(DCW) x l(-1) x h(-1) with increases in lactose concentrations from 0.5 to 3.0%. Maximum biomass was also increased from 1.88 g(DCW) x l(-1) to 4.29 g(DCW) x l(-1). However, increase in lactose concentration did not prolong the active growth phase. After 20 h cultivation, cell growth stopped regardless of lactose concentration. Production of the bacteriocin showed primary metabolic kinetics. However, bacteriocin yield based on cell mass increased greatly during the late growth phase. A maximum activity of 131x10(3) AU x ml(-1) was obtained at early stationary growth phase (20 h) during the batch fermentation in M17L broth (3.0% lactose) at 30 degrees C and pH 6.0.     

Improvement of Bacillus thuringiensis Bacteriocin Production Through Culture Conditions Optimization

Abstract

BUPM4 is a Bacillus thuringiensis subsp. kurstaki strain, isolated from Tunisian soil, producing an original bacteriocin named Bacthuricin F4. The optimization of the latter production conditions was carried out under several physicochemical conditions. It was found that the highest bacteriocin activity was reached at low aeration while bacteriocin synthesis yields were strongly reduced at higher ones. A balance between growth and bacteriocin synthesis, both highly dependent on aeration, was taken into account for the overproduction of bacteriocin. Both glucose and glycerol were shown to be necessary for Bacthuricin F4 maximal synthesis. In addition, the optimal carbon/nitrogen ratio for bacteriocin production is 9. In such optimal conditions, more than 4-fold greater bacteriocin production was obtained than when using TSB medium.     

Characterization of plantaricin KW30, a bacteriocin produced by Lactobacillus plantarum

A protease-sensitive antibacterial substance, produced by a strain of Lactobacillus plantarum isolated from fermented corn, was classified as a bacteriocin and designated plantaricin KW30. The bacteriocin was stable to heat, pH and treatment with surfactants, and unaffected by α-amylase, lipase or lysozyme. Plantaricin KW30 exhibited a bactericidal and non-bacteriolytic mode of action against indicator cells, and inhibitory activity was limited to other lactobacilli. Maximum production was in MRS broth, and coincided with the onset of stationary phase under conditions of low pH and high cell numbers. In a complex medium bacteriocin production was enhanced by the presence of sodium acetate and Tween 80. Curing experiments gave derivatives that no longer produced the bacteriocin but retained immunity to it. These Bac derivatives showed the same plasmid pattern as the parent strain suggesting a chromosomal location for the genes for bacteriocin production.     

The stress-inducted proteins RTP801 and RTP801L are negative regulators of the mammalian target of rapamycin pathway

The mammalian target of rapamycin (mTOR) is a serine/threonine kinase that plays an essential role in cell growth control. mTOR stimulates cell growth by phosphorylating p70 ribosomal S6 kinase (S6K) and eukaryote initiation factor 4E-binding protein 1 (4EBP1). The mTOR pathway is regulated by a wide variety of cellular signals, including mitogenic growth factors, nutrients, cellular energy levels, and stress conditions. Recent studies have proposed several mechanisms to explain how mTOR is regulated by growth factors and cellular energy levels. However, little is known as to how mTOR is regulated by stress conditions. We observed that two stress-induced proteins, RTP801/Redd1 and RTP801L/Redd2, potently inhibit signaling through mTOR. Our data support that RTP801 and RTP801L work downstream of AKT and upstream of TSC2 to inhibit mTOR functions. These results add a new dimension to mTOR pathway regulation and provide a possible molecular mechanism of how cellular stress conditions may regulate mTOR function.     

Influence of nutrients on growth and bacteriocin production by Leuconostoc mesenteroides L124 and Lactobacillus curvatus L442

The aim of this study was to investigate the effect of complex nutrients on microbial growth and bacteriocin production, in order to improve bacteriocin synthesis during the growth cycle of Leuconostoc mesenteroides L124 and Lactobacillus curvatus L442. The fermentations were conducted at the optimum pH and temperature for bacteriocin production (pH 5.5+/-0.1 and temperature 25+/-0.1 degrees C). Because of their association with the final biomass, conditions favouring the increase of the produced biomass resulted in the increase of bacteriocin activity in the growth medium. Since the produced final biomass and the final concentration of the bacteriocins were associated with the amount of the carbon (glucose) and nitrogen source, better growth of the lactic acid bacterial strains favoured the increase of the specific bacteriocin production. Additionally, the bacteriocin production was influenced by carbon/nitrogen ratio.     

Effect of moderate electric field on the metabolic activity and growth kinetics of Lactobacillus acidophilus

Moderate electric fields (MEF), applied across microbial growth media may potentially affect the permeability of cell membranes. We investigated the effects of MEF on bacteriocin (lacidin A) production during fermentation and on microbial growth kinetics of Lactobacillus acidophilus OSU 133. We comparatively investigated the following treatments: conventional, MEF (1 V/cm, 60 Hz, for 40 h), combinations of MEF (1 V/cm, 60 Hz, for the first 5 h) and conventional fermentation (for 35 h), and discrete MEF (1 V/cm, 2 min on and off, for 40 h). In all treatments, except as noted below, temperature was set at 30 degrees C. The two exceptions were control (conventional) and discrete MEF treatment, which were conducted both at 30 and 37 degrees C. MEF treatments at the early stage of fermentation at 30 degrees C showed the maximum bacteriocin activity. Minimum bacteriocin production was observed under conventional fermentation at 37 degrees C. A mathematical model based on Monod growth kinetics was used to predict bacteriocin production and showed results consistent with conventional treatment data. MEF did not have a significant effect on the lag time, maximum specific growth rate, biomass production and pH change under the different experimental conditions at each specific temperature. Based on the observations, bacteriocin activity under the presence of MEF at the early stage of fermentation increased without significant change in the final biomass.     

MK801 impairs thermoregulation in the heat

The effects of MK801 (dizocilpine), a glutamate NMDA receptor antagonist, on thermoregulation in the heat were studied in awake rats exposed to 40 degrees C ambient temperature until their body core temperature reached 43 degrees C. Under these conditions, MK801-treated rats exhibited enhanced locomotor activity and a steady rise in body core temperature, which reduced the heat exposure duration required to reach 43 degrees C. Since MK801-treated rats also showed increased striatal dopaminergic metabolism at thermoneutrality, the role of dopamine in the MK801-induced impairment of thermoregulation in the heat was determined using co-treatment with SCH23390, a dopamine D1 receptor antagonist. SCH23390 normalized the locomotor activity in the heat without any effect on the heat exposure duration. These results suggest that the MK801-induced impairment of thermoregulation in the heat is related to neither a dopamine metabolism alteration nor a locomotor activity enhancement.     

Production and pH-Dependent Bactericidal Activity of Lactocin S, a Lantibiotic from Lactobacillus sake L45

The amount of lactocin S activity in a growing culture depends on the growth stage of the bacteria, the pH of the medium, the presence of ethanol, and the aeration of the culture. We observed the highest levels of bacteriocin activity in the early stationary growth phase of cultures at 30 deg C. When Lactobacillus sake L45 was grown in a fermentor at pH 5, it produced 2,000 to 3,000 bacteriocin units per ml, which represented an 8- to 10-fold increase in bacteriocin production compared with production during batch culture fermentation. Less than 10% of this level of bacteriocin activity was observed during fermentation at pH 6.0. When 1% ethanol was included in the growth medium, a two- to fourfold increase in the bacteriocin yield was observed. Aerating the culture during growth almost completely eliminated the production of active bacteriocin. Our results also showed that lactocin S-mediated killing of target cells depended on the pH of the culture. The pH had to be less than 6 in order to obtain a bactericidal effect with lactocin S-sensitive cells. At pH values greater than 6, lactocin S had no apparent effect on sensitive cells.     

Two different propionicins produced by Propionibacterium thoenii P-127

The bacteriocin GBZ-1 was purified from the growth media of Propionibacterium thoenii P-127 and was found to have a molecular weight of 6000Da. P. thoenii P-127 also known as the producer of the bacteriocin PLG-1 (MW 10kDa). Under specific growth conditions, on semi-solid media, P. thoenii P-127 produced both PLG-1 and GBZ-1. The N-terminal of GBZ-1 was microsequenced, the gene was cloned and the DNA sequence was determined and identified. GBZ-1 is highly homologous to a protease-activated antimicrobial peptide (PAMP). In contrast to PAMP, it was purified in its active form and no protease digestion was required for its activation. The survival curve of indicator bacteria Lactobacillus delbrueckii subsp. lactic ATCC 4797 showed two phases. The fast phase of 20min was followed by a slow phase. While bacterial survival was reduced by 2logs during the fast phase, bacterial survival was reduced by additional 3logs up to 200min during the slow phase. GBZ-1 activity was affected by magnesium and its activity was completely abolished at 50mM magnesium chloride. Other divalent cations had no effect on GBZ-1 activity of GBZ-1. To the best of our knowledge this is the first report of a bacterium producing two different bacteriocins under different growth conditions.     

Influence of media and temperature on bacteriocin production by<Emphasis Type="Italic"> Bacillus cereus</Emphasis> 8A during batch cultivation

Cerein 8A is a bacteriocin produced by the soil bacterium Bacillus cereus 8A, isolated from native woodlands of Brazil. The influence of temperature and media on the growth of B. cereus 8A and the production of this bacteriocin was studied during batch cultivation. Maximum activity was detected by cultivation in brain/heart infusion broth, reaching 3200 activity units ml^–1. Bacteriocin was also produced in peptone, MRS, Mueller–Hinton and nutrient broth, while no activity was observed during cultivation in thioglycollate or tryptic soy broth. Temperature had a strong influence on bacteriocin production, which was higher at 30 °C than at 25 °C. An important decrease in bacteriocin activity was observed at 37 °C. The relationship between growth and specific production rates, as a function of the temperature, showed different kinetics of production and there were several peaks in the specific production rates during growth. Bacteriocin was produced at the stationary phase, indicating it is synthesized as a secondary metabolite.     

Temperature and pH conditions that prevail during fermentation of sausages are optimal for production of the antilisterial bacteriocin sakacin K

Sakacin K is an antilisterial bacteriocin produced by Lactobacillus sake CTC 494, a strain isolated from Spanish dry fermented sausages. The biokinetics of cell growth and bacteriocin production of L. sake CTC 494 in vitro during laboratory fermentations were investigated by making use of MRS broth. The data obtained from the fermentations was used to set up a predictive model to describe the influence of the physical factors temperature and pH on microbial behavior. The model was validated successfully for all components. However, the specific bacteriocin production rate seemed to have an upper limit. Both cell growth and bacteriocin activity were very much influenced by changes in temperature and pH. The production of biomass was closely related to bacteriocin activity, indicating primary metabolite kinetics, but was not the only factor of importance. Acidity dramatically influenced both the production and the inactivation of sakacin K; the optimal pH for cell growth did not correspond to the pH for maximal sakacin K activity. Furthermore, cells grew well at 35 degrees C but no bacteriocin production could be detected at this temperature. L. sake CTC 494 shows special promise for implementation as a novel bacteriocin-producing sausage starter culture with antilisterial properties, considering the fact that the temperature and acidity conditions that prevail during the fermentation process of dry fermented sausages are optimal for the production of sakacin K.     

节杆菌BT801 N-氨甲酰氨基酸水解酶基因的克隆与表达

通过PCR从质粒pUC18 16 9中扩增得到N 氨甲酰氨基酸水解酶基因 (hyuC) ,置于原核表达载体pQE6 0的T5启动子下游构成表达质粒pQE6 0 hyuC ,并在大肠杆菌M15中实现了该基因的高表达。SDS PAGE检测表达产物 ,在相对分子量 44kD处有一表达带 ,经薄层扫描分析目的蛋白占全菌蛋白的 40 % ,主要以可溶性形式存在。酶活性分析结果表明 ,工程菌M15 pQE6 0 hyuC的N 氨甲酰氨基酸水解酶的比活分别比原始菌株ArthrobacterBT80 1和亚克隆DH5α pUC18 16 9提高了 5 2倍和 72倍。在节杆菌BT80 1和大肠杆菌DH5α pUC18 16 9的反应体系中加入等量菌体的工程菌M15 pQE6 0 hyuC ,可使乙内酰脲酶总比活分别提高 8 1倍和 3 0倍。     

Nisin Production by Enterococcus hirae DF105Mi Isolated from Brazilian Goat Milk

The purpose of this study was to select the promising biopreservation bacteriocin producer strain from goat milk and characterize the expressed bacteriocin, related to its physiological and biochemical properties and specificity of operon encoding production and expression of antimicrobial peptide. Brazilian goat milk was used as the source for the selection of bacteriocin-producing lactic acid bacteria. One strain (DF105Mi) stood out for its strong activity against several Listeria monocytogenes strains. Selected strain was identified based on the biochemical and physiological characteristics and 16s rRNA analysis. The bacteriocin production and inhibitory spectrum of strain DF105Mi were studied, together with the evaluation of the effect of temperature, pH, and chemicals on bacteriocin stability and production, activity, and adsorption to target cells as well as to the cell surface of bacteriocin producers. Physiological and bio-molecular analyses based on targeting of different genes, parts of nisin operon were performed in order to investigate the hypothesis that the studied strain can produce and express nisin. Based on biochemical, physiological, and 16s rRNA analysis, the strain DF105Mi was classified as Enterococcus hirae. The selected strain produces a bacteriocin which is stable in a wide range of pH (2.0–12.0), temperature (up to 120 °C), presence of selected chemicals and presents adsorption affinity to different test organisms, process influenced by environmental conditions. Higher bacteriocin production by Ent. hirae DF105Mi was recorded during stationary growth phase, but only when the strain was cultured at 37 °C. The strain’s genetic analysis indicated presence of the genes coding for the production of the bacteriocin nisin. This result was confirmed by cross-checking the sensitivity of the produced strain to commercial nisin A. The strong anti-Listeria activity, bacteriocin adsorption, and stability of produced bacteriocin indicate that Ent. hirae DF105Mi presents a differentiated potential application for biopreservation of fermented dairy products.

     

Influence of pH,temperature and culture media on the growth and bacteriocin production by vaginal Lactobacillus salivarius CRL 1328

AIMS: To study the influence of pH, temperature and culture medium on the growth and bacteriocin production by vaginal Lactobacillus salivarius subsp. salivarius CRL 1328. METHODS AND RESULTS: The study was performed using a complete factorial experimental design. Lactobacillus salivarius was cultivated in LAPTg and MRS broths, adjusted to specific initial pH, and at different temperatures of incubation. The growth, which was evaluated by the Gompertz model, was higher in MRS broth than in LAPTg broth. The initial pH of the culture medium and the temperature had a dramatic effect on the production of bacteriocin. The optimal conditions for bacteriocin production were different to those for optimal growth. The decrease in the pH of the culture medium was parallel to the growth; pH had similar final values in both the MRS and the LAPTg broths. CONCLUSIONS: The optimal growth conditions were recorded in MRS broth, with an initial pH of 6.5 and a temperature of 37 degrees C. The maximum bacteriocin activity was obtained in LAPTg after 6 h at 37 degrees C, and at an initial pH of 6.5 or 8.0. SIGNIFICANCE AND IMPACT OF THE STUDY: The application of a complete factorial design, and the evaluation of the growth parameters through the Gompertz model, enabled a rapid and simultaneous exploration of the influence of pH, temperature and growth medium on both growth and bacteriocin production by vaginal Lact. salivarius CRL 1328.