Effects of an individualized soccer match simulation on vertical stiffness and impedance

An observed relationship between soccer match duration and injury has led to research examining the changes in lower extremity mechanics and performance with fatiguing exercise. Because many fatigue protocols are designed to result in substantial muscular deficits, they may not reflect the fatigue associated with sport-specific demands that have been associated with the increasing incidence of injury as the match progresses. Thus, the aim of this study was to systematically analyze the progressive changes in lower extremity mechanics and performance during an individualized exercise protocol designed to simulate a 90-minute soccer match. Previous match analysis data were used to systematically develop a simulated soccer match exercise protocol that was individualized to the participant's fitness level. Twenty-four National Collegiate Athletic Association Division I soccer players (12 men, 12 women) participated in 2 testing sessions. In the first session, the participants completed the Yo-Yo Intermittent Recovery Test Level 1 to assess their fitness level and determine the 5 submaximal running intensities for their soccer match simulation. In the second test session, progressive changes in the rating of perceived exertion (RPE), lower extremity performance (vertical jump height, sprint speed, and cutting speed), and movement mechanics (jumping vertical stiffness and terminal landing impedance) were measured during the soccer match simulation. The average match simulation running distance was 10,165 ± 1,001 m, consistent with soccer match analysis research. Time-related increases in RPE, and decrements in sprinting, and cutting speed were observed, suggesting that fatigue increased as the simulation progressed. However, there were no time-related decreases in vertical jump height, changes in lower extremity vertical stiffness in jumping, or vertical impedance during landing. Secondary analyses indicated that the coordinative changes responsible for the maintenance of stiffness and impedance differed between the dominant and nondominant limbs. Despite an increase in RPE to near exhaustive levels, and decrements in sprint and cutting performance, the participants were able to maintain jump performance and movement mechanics. Interestingly, the coordinative changes that allowed for the maintenance of vertical stiffness and impedance varied between limbs. Thus, suggesting that unilateral training for performance and injury prevention in soccer-specific populations should be considered.     

The effects of a commercially available warm-up program on landing mechanics in female youth soccer players

The purpose of this study was to examine lower extremity kinematics following implementation of the Sportsmetrics Warm-Up for Injury Prevention and Performance (WIPP) training program. The hypothesis was that there would be no difference in landing mechanics between 2 groups of female youth soccer players (9-11 years of age), with 1 group (Treatment) completing the 8-week-duration (2 days per week) WIPP program and the other serving as a Control group. We recruited 21 female youth soccer players. Treatment (n = 12) and Control (n = 9) groups were established. Using the Sportsmetrics Software for Analysis of Jumping Mechanics, we analyzed lower extremity movement during landing after subjects jumped off a 30.5-cm box and immediately went into a vertical jump. No significant changes in knee separation values were observed in the Treatment group after 8 weeks of WIPP training. The results indicate that 8 weeks of WIPP training did not significantly alter landing strategies.     

Control of dynamic foot-ground interactions in male and female soccer athletes: Females exhibit reduced dexterity and higher limb stiffness during landing

Controlling dynamic interactions between the lower limb and ground is important for skilled locomotion and may influence injury risk in athletes. It is well known that female athletes sustain anterior cruciate ligament (ACL) tears at higher rates than male athletes, and exhibit lower extremity biomechanics thought to increase injury risk during sport maneuvers. The purpose of this study was to examine whether lower extremity dexterity (LED) – the ability to dynamically control endpoint force magnitude and direction as quantified by compressing an unstable spring with the lower limb at submaximal forces – is a potential contributing factor to the “at-risk” movement behavior exhibited by female athletes. We tested this hypothesis by comparing LED-test performance and single-limb drop jump biomechanics between 14 female and 14 male high school soccer players. We found that female athletes exhibited reduced LED-test performance (p=0.001) and higher limb stiffness during landing (p=0.008) calculated on average within 51 ms of foot contact. Females also exhibited higher coactivation at the ankle (p=0.001) and knee (p=0.02) before landing. No sex differences in sagittal plane joint angles and center of mass velocity at foot contact were observed. Collectively, our results raise the possibility that the higher leg stiffness observed in females during landing is an anticipatory behavior due in part to reduced lower extremity dexterity. The reduced lower extremity dexterity and compensatory stiffening strategy may contribute to the heightened risk of ACL injury in this population.     

Long-term training adaptations in elite male volleyball players

Several investigations have demonstrated differences in anthropometry, jump performance, and strength variables between developmental and elite-level volleyball players. However, within the elite level of play, the magnitude of change that can occur with training is unclear. The purpose of this investigation was to examine the anthropometric, vertical jump, and strength quality changes over 2 years in a group of national team volleyball players. Fourteen national team volleyball players (age, 23.0 ± 4.1 years; height, 1.98 ± 0.07 m; weight, 91.7 ± 7.9 kg) began and completed this study. Participants had all played international matches (representing Australia) before the examination time period and continued to do so during the international season. Anthropometry (stature, mass, and sum of 7 skinfolds), vertical jump measures (countermovement vertical jump; depth jump from 0.35 m, DJ; spike jump, SPJ, all including arm swing), and lower-body power (jump squat at body mass, and jump squat + 50% body weight, JS50) measures were tested before and at the conclusion of the investigation period. Significant (p < 0.05) improvements were observed in sum of 7 skinfolds, DJ, SPJ, and JS50 performance, with large magnitude changes (d > 0.70) in the sum of 7 skinfolds reduction, SPJ, and leg extensor power. This study has demonstrated that elite male volleyball players can improve leanness and power, which contribute to improvements in vertical jump.     

The effects of two stretching protocols on the reactive strength index in female soccer and rugby players

The purpose of this study was to investigate the effects of 2 stretching protocols on stretch-shortening cycle performance in female Division I soccer players and female club rugby players. Fifteen soccer and rugby players (20.1 ± 5.9 years, 170.5 ± 14.2 cm, 70.4 ± 22.3 kg) participated in 3 test sessions with different treatments. The first treatment involved a warm-up of 10 minutes of exercise on a cycle ergometer (warm-up only [WO]), the second was this warm-up followed by static stretching (SS), and the third was this warm-up followed by dynamic stretching (DS). The treatments were administered randomly to negate an order effect. Each treatment was immediately followed by a reactive strength index (RSI) test requiring the athletes to drop off a box (45 cm in height) on to a force plate and upon landing immediately jump into the air while minimizing contact time (CT, milliseconds) and maximizing flight time (FT, milliseconds). The RSI was FT: CT. Repeated measures analysis of variance indicated that a significant treatment effect existed for RSI (F = 7.95, 2; p = 0.002) and FT (F = 7.43, 2; p = 0.003) but no significant effect for CT (F = 1.53, 2; p = 0.235). The RSI and FT were significantly greater in DS compared with that in SS and WO. Dynamic stretching is the preferred warm-up before an athletic event involving considerable jumping.     

Analysis of Jumping-Landing Manoeuvers after Different Speed Performances in Soccer Players

PurposeRunning at high speed and sudden change in direction or activity stresses the knee. Surprisingly, not many studies have investigated the effects of sprinting on knee’s kinetics and kinematics of soccer players. Hence, this study is aimed to investigate indices of injury risk factors of jumping-landing maneuvers performed immediately after sprinting in male soccer players.MethodsTwenty-three collegiate male soccer players (22.1±1.7 years) were tested in four conditions; vertical jump (VJ), vertical jump immediately after slow running (VJSR), vertical jump immediately after sprinting (VJFR) and double horizontal jump immediately after sprinting (HJFR). The kinematics and kinetics data were measured using Vicon motion analyzer (100Hz) and two Kistler force platforms (1000Hz), respectively.ResultsFor knee flexion joint angle, (p = 0.014, η = 0.15) and knee valgus moment (p = 0.001, η = 0.71) differences between condition in the landing phase were found. For knee valgus joint angle, a main effect between legs in the jumping phase was found (p = 0.006, η = 0.31), which suggests bilateral deficit existed between the right and left lower limbs.ConclusionIn brief, the important findings were greater knee valgus moment and less knee flexion joint angle proceeding sprint (HJFR & VJFR) rather than no sprint condition (VJ) present an increased risk for knee injuries. These results seem to suggest that running and sudden subsequent jumping-landing activity experienced during playing soccer may negatively change the knee valgus moment. Thus, sprinting preceding a jump task may increase knee risk factors such as moment and knee flexion joint angle.     

Correlation between ground reaction force and tibial acceleration in vertical jumping

Modern electronics allow for the unobtrusive measurement of accelerations outside the laboratory using wireless sensor nodes. The ability to accurately measure joint accelerations under unrestricted conditions, and to correlate them with jump height and landing force, could provide important data to better understand joint mechanics subject to real-life conditions. This study investigates the correlation between peak vertical ground reaction forces, as measured by a force plate, and tibial axial accelerations during free vertical jumping. The jump heights calculated from force-plate data and accelerometer measurements are also compared. For six male subjects participating in this study, the average coefficient of determination between peak ground reaction force and peak tibial axial acceleration is found to be 0.81. The coefficient of determination between jump height calculated using force plate and accelerometer data is 0.88. Data show that the landing forces could be as high as 8 body weights of the jumper. The measured peak tibial accelerations ranged up to 42 g. Jump heights calculated from force plate and accelerometer sensors data differed by less than 2.5 cm. It is found that both impact accelerations and landing forces are only weakly correlated with jump height (the average coefficient of determination is 0.12). This study shows that unobtrusive accelerometers can be used to determine the ground reaction forces experienced in a jump landing. Whereas the device also permitted an accurate determination of jump height, there was no correlation between peak ground reaction force and jump height.     

Force-velocity relationship and maximal power on a cycle ergometer. Correlation with the height of a vertical jump

The force-velocity relationship on a Monark ergometer and the vertical jump height have been studied in 152 subjects practicing different athletic activities (sprint and endurance running, cycling on track and/or road, soccer, rugby, tennis and hockey) at an average or an elite level. There was an approximately linear relationship between braking force and peak velocity for velocities between 100 and 200 rev.min-1. The highest indices of force P0, velocity V0 and maximal anaerobic power (Wmax) were observed in the power athletes. There was a significant relationship between vertical jump height and Wmax related to body mass.     

Gender differences exist in neuromuscular control patterns during the pre-contact and early stance phase of an unanticipated side-cut and cross-cut maneuver in 15–18 years old adolescent soccer players

Non-contact ACL injuries generally occur as the foot contacts the ground during cutting or landing maneuvers and the non-contact ACL injury rate is 2–8 times greater in females compared to males. To provide insight into the gender bias of this injury, this study set out to identify gender differences in the neuromuscular response of the quadriceps, hamstrings and gastrocnemii muscles in elite adolescent soccer players during the pre-contact and early stance phases of an unanticipated side-cut and cross-cut. For the early stance phase of the two maneuvers, females demonstrated greater rectus femoris activity compared to males. Throughout the pre-contact phase of the maneuvers, a rectus femoris activation difference was identified with females having an earlier and more rapid rise in muscle activity as initial ground contact approached. Females demonstrated greater lateral and medial gastrocnemii activity for the pre-contact and early stance phases of the side-cut and greater lateral gastrocnemii activity during early stance of the cross-cut. Timing of hamstring activity also differed between genders prior to foot contact. The differences suggest that the activation patterns observed in females might not be providing adequate joint protection and stability, thereby possibly having a contributing role towards increased non-contact ACL injuries in females.     

Physiological and anthropometric characteristics of elite women rugby league players

This study investigated the physiological and anthropometric characteristics of elite women rugby league players and developed physical performance standards for these athletes. Thirty-two elite women rugby league players underwent measurements of standard anthropometry (body mass, height, sum of 7 skinfolds), muscular power (vertical jump), speed (10-, 20-, and 40-m sprint), agility (505 test), glycolytic capacity (glycolytic agility test), and estimated maximal aerobic power (multistage fitness test). The skinfold thickness, speed, agility, vertical jump height, glycolytic capacity, and estimated maximal aerobic power results were 6.0-38.1% poorer than previously reported for elite women team sport athletes (e.g., rugby union, soccer, and hockey). Although no significant differences (p > 0.05) were detected between selected and nonselected players for any of the physiological or anthropometric characteristics, significant differences (p < 0.05) were detected between forwards and backs for body mass, skinfold thickness, 10-, 20-, and 40-m speed, and estimated maximal aerobic power. When data were analyzed according to positional similarities, it was found that the hit-up forwards positional group were heavier, had greater skinfold thickness, and had lower 10-, 20-, and 40-m speed, muscular power, glycolytic capacity, and estimated maximal aerobic power than the adjustables and outside backs positional groups. The results of this study show that elite women rugby league players have slower speed and agility, lower muscular power, glycolytic capacity, and estimated maximal aerobic power, and greater body mass and skinfold thickness than previously reported for other elite women team sport athletes. These findings show the need to develop all physiological parameters to allow elite women rugby league players to more effectively tolerate the physiological demands of competition, reduce fatigue-related errors in skill execution, and decrease the risk of injury.     

The Yo-Yo IR2 test: physiological response, reliability, and application to elite soccer

ABSTRACT: Oberacker, LM, Davis, SE, Haff, GG, Witmer, CA, and Moir, GL. The Yo-Yo IR2 test: physiological response, reliability, and application to elite soccer. J Strength Cond Res 26(10): 2734-2740, 2012-The purpose of this study was to compare the effects of resistance training performed on either a stable or unstable surface on performance tests in female soccer players. Nineteen National Collegiate Athletic Association Division II female soccer players were assigned to either an unstable training group (UST: 19.0 ± 0.47 years; 1.69 ± 6.4 m; 67.8 ± 7.7 kg) or a stable training group (ST: 19.6 ± 0.49 years; 1.64 ± 3.2 m; 62.7 ± 6.27 kg). Player positions were distributed evenly between the groups. Both the groups followed a 5-week periodized resistance training program designed to develop maximum muscular strength. The groups performed the same exercises during each workout, with the UST performing 2 of the exercises in each session on an unstable surface. Pretraining and posttraining measures of straight-line sprint speed, planned and reactive agility, aerobic capacity, and countermovement vertical jump (CMJ) were taken. Significant main effects for time were reported for straight-line sprint speed, planned agility, and reactive agility with both groups demonstrating improvements during the posttraining testing session. The ST demonstrated a significant increase in CMJ during the posttraining session (change in mean: 0.04 m) in contrast to the decline demonstrated by the UST (change in mean: -0.01 m). Performing resistance training exercises on an unstable surface confers no advantage over traditional resistance training exercises for improving the speed, agility, and aerobic capacity of female soccer players. Furthermore, the use of an unstable surface may inhibit the effects of resistance training on vertical jump height, an important variable in soccer performance.     

The correlation of segment accelerations and impact forces with knee angle in jump landing

Impact forces and shock deceleration during jumping and running have been associated with various knee injury etiologies. This study investigates the influence of jump height and knee contact angle on peak ground reaction force and segment axial accelerations. Ground reaction force, segment axial acceleration, and knee angles were measured for 6 male subjects during vertical jumping. A simple spring-mass model is used to predict the landing stiffness at impact as a function of (1) jump height, (2) peak impact force, (3) peak tibial axial acceleration, (4) peak thigh axial acceleration, and (5) peak trunk axial acceleration. Using a nonlinear least square fit, a strong (r = 0.86) and significant (p < or = 0.05) correlation was found between knee contact angle and stiffness calculated using the peak impact force and jump height. The same model also showed that the correlation was strong (r = 0.81) and significant (p < or = 0.05) between knee contact angle and stiffness calculated from the peak trunk axial accelerations. The correlation was weaker for the peak thigh (r = 0.71) and tibial (r = 0.45) axial accelerations. Using the peak force but neglecting jump height in the model, produces significantly worse correlation (r = 0.58). It was concluded that knee contact angle significantly influences both peak ground reaction forces and segment accelerations. However, owing to the nonlinear relationship, peak forces and segment accelerations change more rapidly at smaller knee flexion angles (i.e., close to full extension) than at greater knee flexion angles.     

The validation of a portable force plate for measuring force-time data during jumping and landing tasks

The purpose of this study was to determine the reliability and validity of a portable force plate when analyzing jumping and landing tasks. Subjects performed 3 drop vertical jumps and 3 drop landings on both a standard strain gauge laboratory force plate and a portable force plate. In contrast to typical laboratory installed force plates, the portable 6-component force plate can be easily transported and used onsite at various training or data collection sites and incorporates Hall effect technology. The measured parameters included maximum force and time to maximum force for initial stance of the both tests, maximum takeoff force, and time to maximum takeoff force for the drop vertical jump. The Pearson correlation coefficients for the drop landing and the drop vertical jump for maximum force (r = 0.942, r = 0.940), time to maximum force (r = 0.891, r = 0.920) and for drop jump maximum jumping force (r = 0.971), and time to maximum takeoff force (r = 0.917) were all high and indicate that the force data collected by a resistor-type portable force plate provide similar measures to a standard strain-gauge laboratory force plate. Additionally, the within session reliability of the drop landing and the drop vertical jump measured by the portable force plate showed high interclass correlation coefficients for examined variables of 0.979 and 9.67 for maximum landing force and 0.917 and 0.920 for time to maximum landing force, respectively. The interclass correlation coefficients for the maximum takeoff force and time to maximum takeoff force during the drop vertical jump were 0.991 and 0.86. The results indicate the force and timing measurements from the portable force plate were both valid and reliable. Use of the portable force plate may facilitate methods of force measurement that can be applied out into the field and therefore a valuable tool for on site landing and jump force measurements in a variety of settings for large numbers of subjects.     

A mechanics comparison between landing from a countermovement jump and landing from stepping off a box

It is common practice to study jump landing mechanics by having subjects step off a box set at a certain height instead of landing from a jump. This practice assumes that the landing mechanics are similar between stepping off a box and a countermovement jump as long as the heights can be matched. The mechanics of the two methods had never been compared when landing from identical heights. Thus, the purpose of this study was to compare the mechanics of landing from a countermovement jump to landing from a step-off. Participants performed three maximal countermovement jumps. The mechanics of one countermovement jump was compared with a center of mass fall height matched step-off landing. The step-off landing showed a more rapid time to peak ground reaction force (GRF) in both genders and greater GRF peak and loading rate in males only. No difference was observed between joint angles at initial contact; however, the countermovement jump showed significantly greater joint flexion angles at peak GRF for both genders. EMG showed greater muscle activity during the countermovement jump condition in all subjects. It was concluded that countermovement jump landings are different from step-off landings; thus, results from analyses involving step-off landings should be taken with caution if the aim is to relate them to landing from a jump.     

A comparison between back squat exercise and vertical jump kinematics: implications for determining anterior cruciate ligament injury risk

Women are up to eight times more likely than men to suffer an anterior cruciate ligament (ACL) injury, and knee valgus is perhaps the most at-risk motion. Women have been shown to have more knee valgus than men in squatting movements and while landing. The purposes were to investigate whether a relationship exists between lower-extremity frontal plane motions in squatting and landing, whether gender differences exist, and whether squat or hip abduction strength relates to knee valgus while landing. Eleven collegiate Division III soccer players and 11 recreationally trained men were tested for maximal vertical jump height and for squat and hip abduction strength. On the second day of testing, subjects performed light (50% one repetition maximum) and heavy (85%) squat protocols and three landings from their maximal vertical jump height. Pearson's product-moment correlation coefficients and a 2 x 10 factorial analysis of variance with t-test post hoc comparisons (p 相似文献   

Modelling, simulation and optimisation of a human vertical jump.

This paper describes an efficient biomechanical model of the human lower limb with the aim of simulating a real human jump movement consisting of an upword propulsion, a flying and a landing phase. A multiphase optimal control technique is used to solve the muscle force sharing problem. To understand how intermuscular control coordinates limb muscle excitations, the human body is reduced to a single lower limb consisting of three rigid bodies. The biomechanical system is activated by nine muscle-tendon actuators representing the basic properties of muscles during force generation. For the calculation of the minimal muscle excitations of the jump movement, the trajectory of the hip joint is given as a rheonomic constraint and the contact forces (ground reaction forces) are determined by force plates. Based on the designed musculoskeletal model and on the differential equations of the multibody system, muscle excitations and muscle forces necessary for a vertical jump movement are calculated. The validity of the system is assessed comparing the calculated muscle excitations with the registered surface electromyogramm (EMG) of the muscles. The achieved results indicate a close relationship between the predicted and the measured parameters.     

Alterations to movement mechanics can greatly reduce anterior cruciate ligament loading without reducing performance

Anterior cruciate ligament (ACL) injuries are one of the most common and potentially debilitating sports injuries. Approximately 70% of ACL injuries occur without contact and are believed to be preventable. Jump stop movements are associated with many non-contact ACL injuries. It was hypothesized that an athlete performing a jump stop movement can reduce their peak tibial shear force (PTSF), a measure of ACL loading, without compromising performance, by modifying their knee flexion angle, shank angle, and foot contact location during landing. PTSF was calculated for fourteen female basketball players performing jump stops using their normal mechanics and mechanics modified to increase their knee flexion angle, decrease their shank angle relative to vertical and land more on their toes during landing. Every subject tested experienced drastic reductions in their PTSF (average reduction=56.4%) using modified movement mechanics. The athletes maintained or improved their jump height with the modified movement mechanics (an average increase in jump height of 2.5 cm). The hypothesis was supported: modifications to jump stop movement mechanics greatly reduced PTSF and therefore ACL loading without compromising performance. The results from this study identify crucial biomechanical quantities that athletes can easily modify to reduce ACL loading and therefore should be targeted in any physical activity training programs designed to reduce non-contact ACL injuries.     

Unanticipated ankle inversions are significantly different from anticipated ankle inversions during drop landings: overcoming anticipation bias

Few ankle inversion studies have taken anticipation bias into account or collected data with an experimental design that mimics actual injury mechanisms. Twenty-three participants performed randomized single-leg vertical drop landings from 20 cm. Subjects were blinded to the landing surface (a flat force plate or 30° inversion wedge on the force plate). After each trial, participants reported whether they anticipated the landing surface. Participant responses were validated with EMG data. The protocol was repeated until four anticipated and four unanticipated landings onto the inversion wedge were recorded. Results revealed a significant main effect for landing condition. Normalized vertical ground reaction force (% body weights), maximum ankle inversion (degrees), inversion velocity (degrees/second), and time from contact to peak muscle activation (seconds) were significantly greater in unanticipated landings, and the time from peak muscle activation to maximum VGRF (second) was shorter. Unanticipated landings presented different muscle activation patterns than landings onto anticipated surfaces, which calls into question the usefulness of clinical studies that have not controlled for anticipation bias.     

Test-retest reliability of knee biomechanics during stop jump landings

Studies that seek to determine the effects of an intervention on knee biomechanics during landing from a jump implicitly assume that the variables of interest are reliable both within and between data collection sessions. Currently, such reliability data are not available for a stop jump. Standard three-dimensional motion analysis was used to determine sagittal and frontal plane peak angles and moments and peak vertical ground reaction force within and between sessions for a stop jump. Twelve female recreational athletes participated in two data collection sessions spaced two weeks apart. Interclass correlation coefficients and coefficient of multiple correlation were used to determine within and between session reliability of peak knee flexion angle, peak internal knee extension moment, peak knee abduction angle, peak internal knee adduction moment and peak vertical ground reaction force. Overall reliability within a session (ICC (3,1) 0.631-0.881; CMC 0.672-0.958) and between sessions (ICC (3,k) 0.685-0.959; CMC 0.598-0.944) was good. Peak angles and moments were similar between sessions. The stop jump is less reliable within a session than a drop vertical jump reported previously in the literature. This is likely due to increased intrasubject variability between trials due to the less constrained nature of the task. Reliability of the stop jump is comparable to the drop vertical jump between sessions. Reliability of knee adduction moment is lower than reported for the drop vertical jump. The results of this study support the use of a stop jump task to evaluate knee biomechanics during landing in longitudinal studies with a repeated measures design.