Mechanical properties of UV irradiated rat tail tendon (RTT) collagen

The mechanical properties of RTT collagen tendon before and after UV irradiation have been investigated by mechanical testing (Instron). Air-dried tendon were submitted to treatment with UV irradiation (wavelength 254 nm) for different time intervals. The changes in such mechanical properties as breaking strength and percentage elongation have been investigated. The results have shown, that the mechanical properties of the tendon were greatly affected by time of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the tendon. Increasing UV irradiation leads to a decrease in Young's modulus of the tendon.     

An electrostatic model for collagen fibrils. The interaction of reconstituted collagen with Ca++, Na+, and Cl−

A model for the electrostatic properties of hydrated collagen fibrils, based on the concept of a “penetrable” protein, has been evaluated through studies of collagen fibrils that had been chemically modified to change their electrostatic properties,. A value of 0.28 ± 0.07 ml/g was found for the intrafibrillar space sterically inaccessible to a molecule that had an equivalent spherical radius of 4.5 Å. The net intrinsic charge on reconstituted collagen is +14 mol/mol under physiological conditions, but decreases, at constant pH, with ionic strength. A value of 7.1 for the pK of the histidine and α-amino groups in reconstituted collagen was obtained through the application of the electrostatic model to this effect. The values obtained for calcium binding parameters for collagen fibrils, under solution conditions in which the nonspecific electrostatic properties of collagen fibrils were eliminated (3–5 M tetramethyl ammonium chloride), were in agreement with values obtained in 0.16 M NaCl solutions calculated through the use of the electrostatic theory. These are 0.73 ± 0.23 and 56.2 ± 12.3 sites per molecule with intrinsic association constants of 1101 ± 386 and 21.4 ± 5.2 M^?1, respectively. The model also predicts that an average 4-mV potential difference exists between the reconstituted collagen fibrils and physiological solutions, and that collagen fibrils under such conditions have piezoelectriclike properties. The pattern of interaction of ions with collagen fibrils is such that an allosteric mechanism for the catalytic step in the mineralization of collagen is a possibility.     

Preparation and characterization of konjac glucomannan/poly(diallydimethylammonium chloride) antibacterial blend films

A novel antibacterial film was prepared by blending konjac glucomannan (KGM) and poly(diallydimethylammonium chloride) (PDADMAC) in an aqueous system. The antibacterial activity of the films against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, and Saccharomyces were measured by the halo zone test and the double plate method. The films exhibited an excellent antibacterial activity against B. subtilis and S. aureus but not against E. coli, P. aeruginosa or Saccharomyces. The miscibility, morphology, thermal stability, water vapour permeability and mechanical properties of the blend films were investigated by density determination, SEM, ATR-IR, XRD, DSC, TGA, WVA and tensile tests. The results of density determination predicted that the blends of KGM and PDADMAC were miscible when the PDADMAC content was less than 70 wt%. Moreover, SEM and XRD confirmed the result. ATR-IR showed that strong intermolecular hydrogen bonds and electrostatic interactions occurred between KGM and PDADMAC in the blends. The tensile strength and the break elongation of the blends were improved largely to 106.5 MPa and 32.04% and the water vapour permeability decreased when the PDADMAC content was 20 wt%. The thermal stability of the blends was higher than pure KGM. The blends should be good antibacterial materials.     

Preparation and characterization of ultra violet (UV) radiation cured bio-degradable films of sago starch/PVA blend

Polymer films of sago starch/polyvinyl alcohol (PVA) were prepared by casting and cured under ultra violet (UV) radiation. Different blends were made varying the concentration of sago starch and PVA. Tensile strength (TS) and elongation at break (Eb) of the prepared films were studied. Films made up of sago starch and PVA with a ratio of 1:2 showed the highest TS and Eb. The physico-mechanical properties of prepared films were improved by grafting with acrylic monomers with the aid of UV radiation. A series of formulations was prepared with two monomers 2-ethyl 2-hydroxymethyl 1,3 methacrylate (EHMPTMA) and 2-ethylhexylacrylate (EHA) and a photoinitiator. Monomer concentration, soaking time and radiation dose were optimized in terms of grafting and mechanical properties. The highest TS was at 50% EHMPTMA and 48% EHA and 2% photo initiator at 5 min soaking time and recorded value was 6.58 MPa. The prepared films were further characterized with NMR spectroscopy and scanning electron microscope (SEM).     

Development of films based on blends of Amaranthus cruentus flour and poly(vinyl alcohol)

The aim of this work was to develop biodegradable films based on blends of Amaranthus cruentus flour and poly(vinyl alcohol). Five different PVA types were tested. Blends with higher hydrolysis (HD) degree PVA were more resistant, showing greater tensile strength (TS) and puncture force (PF). However, the films with PVA with lower HD showed more flexibility, greater elongation at break (ELO) and greater puncture deformation (PD), with the exception of PVA 325. The latter was chosen due to it superior mechanical performance (TS = 10.2 MPa, ELO = 89.8%, PF = 9.4 N and PD = 16.3%). When films based on blends of amaranth flour and PVA 325 (10–50%) were evaluated, all mechanical properties were enhanced with increase in PVA 325 content. The solubility in water of the films made with PVA and amaranth flour decreased with increasing PVA content, reaching 44% of soluble matter for the 50% PVA film. The formation of hydrogen bonds between the blend components was confirmed by the FTIR spectra analysis.     

Biodegradation of polyurethane acrylate with acrylated epoxidized soybean oil blend elastomers by Chaetomium globosum

This paper studies the biodegradation features of a novel blend of polyurethane acrylate-acrylated epoxidized soybean oil-based cross-linked polyurethane elastomers in the presence of the soft-rot fungus Chaetomium globosum. After the specimens were incubated at 28 °C for 90 and 130 days, the degree of fungal damage was measured by analysis of weight loss and mechanical properties. The biodegradation of the films was also evidenced by SEM and FTIR spectroscopic studies. After fungal attack, the FTIR spectra indicate a degradation of urethane and ester groups of the polyurethane and especially of the ester groups from the modified soybean oil part. The polyurethane blend films exposed to fungal attack suffered a loss in strength of up to 55% and a loss in elongation of up to 80%, depending on the content of acrylated epoxidized soybean oil. The biodegradation of the blends was also confirmed by SEM analyses. The biodegradation results show that samples with a high content of acrylated epoxidized soybean oil are more biodegradable than mere polyurethane acrylate. These biodegradable polymer blends present an optimum balance of physical properties and biodegradable properties with the potential for application as eco-friendly biomaterials.     

Citric acid and maleic anhydride as compatibilizers in starch/poly(butylene adipate-co-terephthalate) blends by one-step reactive extrusion

Starch/poly(butylene adipate-co-terephthalate) films were obtained by one-step reactive extrusion using maleic anhydride (MA) and citric acid (CA) as compatibilizers. The mechanical, structural, optical and barrier properties of the films were analyzed when glycerol (GLY), CA and MA were added to the starch/PBAT (55:45, w/w) according to mixture design. FTIR analysis showed that CA and MA were able to promote esterification/transesterification reactions and that CA induced them more efficiently. When a greater proportion of compatibilizer (1.5 wt%) was used, the resulting films were more opaque and had a greater tensile strength. A greater proportion of GLY (10.0%, w/w) improved the elongation at the break of the films. The barrier properties to water vapor of the films were improved by high levels of CA (1.5 wt%) and intermediate levels of GLY (9.25 wt%). The inclusion of compatibilizers resulted in blends with improved properties, representing a potential replacement for non-biodegradable films.     

Structural characterization and properties of starch/konjac glucomannan blend films

In this work, a series of glycerol-plasticized pea starch/konjac glucomannan (ST/KGM) blend films was prepared by a casting and solvent evaporation method. The structure, thermal behavior, and mechanical properties of the films were investigated by means of Fourier Transform Infrared Spectroscopy, wide-angle X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, and tensile testing. The results indicated that strong hydrogen bonding formed between macromolecules of starch (ST) and konjac glucomannan (KGM), resulting in a good miscibility between ST and KGM in the blends. Compared with the neat ST, the tensile strength of the blend films were enhanced significantly from 7.4 to 68.1 MPa with an increase of KGM content from 0 to 70 wt%. The value of elongation at break of the blend films was higher than that of ST and reached a maximum value of 59.0% when the KGM content was 70 wt% and 20% of glycerol as plasticizer. The incorporation of KGM into the ST matrix also led to an increase of moisture uptake for the ST-based materials. The structure and properties of pea starch-based films were modified and improved by blending with KGM.     

Vascular smooth muscle cell response on thin films of collagen.

Vascular smooth muscle cells (vSMC) cultured on gels of fibrillar type I collagen or denatured collagen (gelatin) comprise a model system that has been widely used for studying the role of the extracellular matrix in vascular diseases such as hypertension, restenosis and athrosclerosis. Despite the wide use of this model system, there are several disadvantages to using collagen gels for cellular studies. These include poor optical characteristics for microscopy, difficulty in verifying that the properties of the preparations are identical from experiment to experiment, heterogeneity within the gels, and difficulty in handling the gels because they are fragile. Previously, we developed an alternative collagen matrix by forming thin films of native fibrillar collagen or denatured collagen on self-assembled monolayers of alkanethiols [Elliott, J.T., Tona, A., Woodward, J., Jones,P., Plant, A., 2003a. Thin films of collagen affect smooth muscle cell morphology. Langmuir 19, 1506-1514.]. These substrates are robust and can be characterized by surface analytical techniques that allow both verification of the reproducibility of the preparation and high-resolution analysis of collagen structure. In addition, they have excellent optical properties that allow more details of the cell-matrix interactions to be observed by microscopy. In this study, we performed a side-by-side structural and functional comparison of collagen gels with thin films of collagen. Our results indicate that vSMC on thin films of collagen are nearly identical to vSMC on thick gels as determined by morphology, proliferation rate, integrin ligation, tenascin-C expression and intracellular signaling events. These results suggest that the features of collagen gels that direct the observed vSMC responses are adequately reconstituted in the thin films of collagen. These thin films will be useful for elucidating the features of the collagen matrix that regulate vSMC response and may be applicable to high content screening.     

Dentin matrix protein 1 immobilized on type I collagen fibrils facilitates apatite deposition in vitro

During bone and dentin mineralization, the crystal nucleation and growth processes are considered to be matrix regulated. Osteoblasts and odontoblasts synthesize a polymeric collagenous matrix, which forms a template for apatite initiation and elongation. Coordinated and controlled reaction between type I collagen and bone/dentin-specific noncollagenous proteins are necessary for well defined biogenic crystal formation. However, the process by which collagen surfaces become mineralized is not understood. Dentin matrix protein 1 (DMP1) is an acidic noncollagenous protein expressed during the initial stages of mineralized matrix formation in bone and dentin. Here we show that DMP1 bound specifically to type I collagen, with the binding region located at the N-telopeptide region of type I collagen. Peptide mapping identified two acidic clusters in DMP1 responsible for interacting with type I collagen. The collagen binding property of these domains was further confirmed by site-directed mutagenesis. Transmission electron microscopy analyses have localized DMP1 in the gap region of the collagen fibrils. Fibrillogenesis assays further demonstrated that DMP1 accelerated the assembly of the collagen fibrils in vitro and also increased the diameter of the reconstituted collagen fibrils. In vitro mineralization studies in the presence of calcium and phosphate ions demonstrated apatite deposition only at the collagen-bound DMP1 sites. Thus specific binding of DMP1 and possibly other noncollagenous proteins on the collagen fibril might be a key step in collagen matrix organization and mineralization.     

Biodegradable films of partly branched poly(l-lactide)-co-poly(epsilon-caprolactone) copolymer: modulation of phase morphology, plasticization properties and thermal depolymerization

We report on the modulation of phase morphology, plasticization properties, and thermal stability of films of partly branched poly(l-lactide)-co-poly(epsilon-caprolactone) copolymer (PLLA-co-PCL) with additions of low molecular weight compounds, namely, triethyl citrate ester, diethyl phthalate, diepoxy polyether (poly(propylene glycol) diglycidyl ether), and with epoxidized soybean oil (ESO). The PLLA-co-PCL/polyether films showed significant stability against thermal depolymerization, high film flexibility, and good plasticizing properties, probably due to cross-linking and chain branching formation between diepoxy groups with both the end carboxyl and hydroxyl groups of the PLLA copolymer (initially present or generated during the degradation process) to produce primary ester and ether bonds, respectively. Diethyl phthalate and triethyl citrate ester were found to be efficient plasticizers for PLLA copolymer in terms of glass transition and mechanical properties, but the more water-soluble plasticizer triethyl citrate induced a dramatic loss in the molecular weight of the copolymer. Although ESO cannot play the role of a plasticizer, it substantially stabilizes and retards thermal depolymerization of the PLLA copolymer matrix, possibly because of a reaction between epoxy groups with the end carboxyl and hydroxyl groups of the PLLA copolymer. The presence of ESO in PLLA-co-PCL/ESO/triethyl citrate blends enhanced the compatibility and miscibility of the plasticizer with the PLLA copolymer matrix, considerably improved the mechanical properties (elongation at break), and substantially stabilized the copolymer against thermal depolymerization. It seems likely that the epoxy groups interact not only with the end hydroxyl and carboxyl group of the copolymer but as well with the hydroxyl group of triethyl citrate plasticizer to produce a new ether bond (C-O-C) as the cross-linking unit. On the other hand, for PLLA-co-PCL/ESO/polyether blends, (80/10/10) epoxidized oil distorts the compactness of the blend by diminishing the proposed entanglements between carboxyl, hydroxyl, and diepoxy groups of polyether and reduces the high elongation properties otherwise observed in the PLLA-co-PCL/polyether films. The multicomponent approach toward modulating poly(l-lactide)-co-poly(epsilon-caprolactone) copolymer films using epoxy compounds and plasticizers and the insight into the nature of various PLLA matrixes presented here offer advantages to a broad engineering of PLLA copolymer films having desirable physical properties and multiphase behavior for efficient uses in future technical applications.     

Mechanical,barrier and morphological properties of pea starch and peanut protein isolate blend films

Mechanical, barrier and morphological properties of edible films based on blends of Pea starch (PS) and Peanut protein isolate (PPI) plasticized with glycerol (30%, w/w) were investigated. As PPI ratio in PS/PPI blends increased, the thickness of films decreased, the opacity slightly elevated and color intensified. The addition of PPI to the PS film significantly reduced tensile strength from 5.44 MPa to 3.06 MPa, but increased elongation from 28.56% to 98.12% with the incorporation of PPI into PS at 50% level. Film solubility value fell from 22.31% to 9.78% upon the incorporation of PPI ranged from 0 to 50% level. When PPI was added into PS film at 40% level, the WVP and WVTR of the films markedly dropped from 11.18% to 4.19% and 6.16 to 1.95%, respectively. Scanning electron microscopy (SEM) of the surface of films showed that many swollen starch granules were presented in the 100% PS film, while 100% PPI film was observed to have rougher surfaces with presence of pores or cavities. The PS/PPI blend films upon the incorporation of PPI at 20% and 50% level were not homogeneous. However, the smoother film surface was observed in PS/PPI blend films with the addition of PPI at 40% level. SEM image of the cross-sections of the films revealed that the 100% PS film showed a uniform and compact matrix without disruption, and pore formation and 100% PPI film displayed a smooth structure. Rougher and flexible network was shown in blend film with the addition of PPI reaching 40% level.     

Chitosan and gelatin based edible films: state diagrams, mechanical and permeation properties

Films of chitosan and gelatin were prepared by casting their aqueous solutions (pH≈4.0) at 60°C and evaporating at 22 or 60°C (low- and high-temperature methods, respectively). The physical (thermal, mechanical and gas/water permeation) properties of these composite films, plasticized with water or polyols, were studied. An increase in the total plasticizer content resulted in a considerable decrease of elasticity modulus and tensile strength (up to 50% of the original values when 30% plasticizer was added), whereas the percentage elongation increased (up to 150% compared to the original values). The low-temperature preparation method led to the development of a higher percentage renaturation (crystallinity) of gelatin which resulted in a decrease, by one or two orders of magnitude, of CO₂ and O₂ permeability in the chitosan/gelatin blends. An increase in the total plasticizer content (water, polyols) of these blends was found to be proportional to an increase in their gas permeability.     

Edible films made from natural resources; microcrystalline cellulose (MCC), methylcellulose (MC) and corn starch and polyols-Part 2

Aqueous blends of microcrystalline cellulose (MCC) or methyl cellulose (MC) and corn starch with or without polyols were extruded, hot pressed and studied, after their conditioning at different relative humidities, in terms of their thermal, mechanical and water and gas permeability properties. An increase in water or polyol content showed a considerable increase in percentage elongation but also a decrease in the tensile strength of films. The presence of high cellulose contents increased the tensile strength and decreased the water vapour transmission of films. The development of crystallinity with time resulted in a decrease of both gas and water permeability. Several semiempirical models for calculation of gas permeability and tensile strength and tensile and flexural moduli were applied. The obtained values were compared to those experimentally determined and with the ones reported in the literature. On several occasions, quite significant discrepancies were found which were attributed to differences in molecular weight, percentage crystallinity and polymorphism.     

Physicochemical Properties of Biodegradable Polyvinyl Alcohol–Agar Films from the Red Algae <Emphasis Type="Italic">Hydropuntia cornea</Emphasis>

Agar obtained from the red alga Hydropuntia cornea was blended with polyvinyl alcohol (PVOH) in order to produce biodegradable films. In this study, we compare the properties of biopolymeric films formulated with agars extracted from H. cornea collected at different seasons (rainy and dry) in the Gulf of Mexico coast and PVOH as synthetic matrix. The films were prepared at different agar contents (0%, 25%, 50%, 75%, and 100%) and their optical, mechanical, thermal, and morphological properties analyzed. The tensile strength of PVOH–agar films increased when agar content was augmented. The formulation with 50% agar from rainy season (RS) had a significant higher tensile strength when compared to those from dry season (DS; p < 0.05). Tensile modulus also displayed an increasing trend and likewise, for 50% and 75% agar blends from RS showed higher values than those from DS (p < 0.05). In contrast, elongation at break decreased as the agar content increased, independently of the season. Environmental scanning electron microscopy images of PVOH–agar 75% biofilms from RS showed a homogeneous structure with good interfacial adhesion between the two components. The changes evidenced in the FTIR spectrum of this blend suggest that hydrogen bonding is taking place between the agar ether linkages (C-O-C) and the hydroxyl groups (OH) of the PVOH. Based on the above mentioned results, blends of PVOH and 75% agar from H. cornea collected in rainy season showed good properties for applications in the biodegradable packaging industry.     

Stabilization of hot-melt extrusion formulations containing solid solutions using polymer blends

This study was aimed at enhancing the physical stability of the drug clotrimazole (CT) and the polymer contained within hot-melt extrusion (HME) films using polymer blends of hydroxypropyl cellulose (HPC) and poly(ethylene oxide) (PEO). The HME films were investigated for solid-state characteristics, moisture sorption, bioadhesivity, mechanical properties, glass transition temperature, release characteristics, and physical and chemical stability of the drug and the polymer within the HME films. The solid-state characterization of the drug and the polymer was performed using differential scanning calorimetry, x-ray diffractometry, and dynamic mechanical analysis. A texture analyzer was used to study the bioadhesive and mechanical properties of the HME films. The physical and chemical stability of the films, stored at 25°C/60% relative humidity or in a desiccator, was studied for up to 12 months. CT was found to be in solid solution within all of the formulations extruded. The physical stability of the drug and PEO in the HME films increased with increasing HPC concentration, but the bioadhesivity and flexibility of the PEO films decreased with increasing HPC concentration. Films containing HPC: PEO∶CT in the ratio of 55∶35∶10 demonstrated optimum physical-mechanical, bioadhesive, and release properties. In conclusion, polymer blends of HPC and PEO were used successfully to tailor the drug release, mechanical and bio-adhesive properties, and stability of the HME films. Published: June 29, 2007     

Biomimetic mineralization of woven bone-like nanocomposites: role of collagen cross-links

Ideal biomaterials for bone grafts must be biocompatible, osteoconductive, osteoinductive and have appropriate mechanical properties. For this, the development of synthetic bone substitutes mimicking natural bone is desirable, but this requires controllable mineralization of the collagen matrix. In this study, densified collagen films (up to 100 μm thick) were fabricated by a plastic compression technique and cross-linked using carbodiimide. Then, collagen-hydroxyapatite composites were prepared by using a polymer-induced liquid-precursor (PILP) mineralization process. Compared to traditional methods that produce only extrafibrillar hydroxyapatite (HA) clusters on the surface of collagen scaffolds, by using the PILP mineralization process, homogeneous intra- and extrafibrillar minerals were achieved on densified collagen films, leading to a similar nanostructure as bone, and a woven microstructure analogous to woven bone. The role of collagen cross-links on mineralization was examined and it was found that the cross-linked collagen films stimulated the mineralization reaction, which in turn enhanced the mechanical properties (hardness and modulus). The highest value of hardness and elastic modulus was 0.7 ± 0.1 and 9.1 ± 1.4 GPa in the dry state, respectively, which is comparable to that of woven bone. In the wet state, the values were much lower (177 ± 31 and 8 ± 3 MPa) due to inherent microporosity in the films, but still comparable to those of woven bone in the same conditions. Mineralization of collagen films with controllable mineral content and good mechanical properties provide a biomimetic route toward the development of bone substitutes for the next generation of biomaterials. This work also provides insight into understanding the role of collagen fibrils on mineralization.     

Films of starch and poly(butylene adipate co-terephthalate) added of soybean oil (SO) and Tween 80

Starch extruded in the presence of a plasticizer results in a material called thermoplastic starch (TPS). TPS mixed with poly(butylene adipate co-terephthalate) (PBAT), soybean oil (SO), and surfactant may result in films with improved mechanical properties due to greater hydrophobicity and compatibility among the polymers. This study characterized films produced from blends containing 65% TPS and 35% PBAT with SO added as compatibilizer. The Tween 80 was added to prevention of phase separation. The elongation and resistance were greater in the films with SO. The infrared spectra confirmed an increase in ester groups bonded to the PBAT and the presence of groups bonded to the starch ring, indicating TPS-SO and PBAT-SO interactions. The micrographs suggest that the films with SO were more homogenous. Thus, SO is considered to be a good compatibilizer for blends of TPS and PBAT.     

Preparation of ready-to-use, storable and reconstituted type I collagen from rat tail tendon for tissue engineering applications

Collagen is a widely investigated extracellular matrix material with extensive potentials in the field of tissue engineering. This protocol describes a method to prepare reconstituted collagen that can be ready-to-use, storable and suitable for further in vitro and in vivo investigations. Type I collagen was extracted from rat tail tendons and processed in acetic acid solution to obtain sterile soluble collagen. At first, crude collagen was dissolved in acetic acid, then frozen at -20 degrees C and lyophilized to obtain a sponge, which could be stored at -80 degrees C. Lyophilized collagen was then dispersed in acetic acid to obtain a sterile solution of collagen at targeted concentrations. The whole low-cost process from the extraction to the final sterile solution takes around 2-3 weeks. The collagen solution, once neutralized, has the potential to be used to produce gels or scaffolds, to deposit thin films on supports and to develop drug delivery systems.     

Effect of glycerol on behaviour of amylose and amylopectin films

The effect of water and glycerol on sorption and calorimetric T_gs of amylose and amylopectin films were examined. The mechanical properties of the films were also analysed under varying glycerol content at constant RH and temperature. Based on changes observed in sorption and tensile failure behaviour glycerol was strongly interacted with both starch polymers. Even though water was observed to be more efficient plasticiser than glycerol, glycerol also affected the T_g. But in spite of the observed decrease in T_g under low glycerol contents brittleness of the films increased based on changes in elongation. The increase in brittleness of both polymers was also in agreement with their actual behaviour. At around 20% glycerol great change in the rheological properties occurred. Above 20% glycerol amylose film showed much larger elongation than the low glycerol content films and was still strong but the amylopectin produced a very week and non-flexible film.