Quantification and optimization of Candida albicans DNA in blood samples using Real- Time PCR

Background:

Candida albicans (C. albicans) is a major cause of candidaemia in people with impaired immunity. Blood culture is a “gold standard” for candidaemia detection but is time-consuming and relatively insensitive. We established a real-time PCR assay for C. albicans detection in blood by LightCycler PCR and melting curve analysis.

Methods:

Five milliliter blood samples from healthy volunteers were spiked with 10⁰-10⁶ C. albicans cells to determine the detection limit of our method. DNA was extracted from whole blood using glass beads and the QIAamp DNA Blood Mini Kit (Qiagen, Hilden Germany). DNA from C. albicans isolates were amplified with primers and inserted into Escherichia coli (E. coli) DH5α.1 cells with the TA cloning vector (Invitrogen). The plasmid was used for standardization and optimization. A quantitative PCR assay with the LightCycler amplification and detection system based on fluorescence resonance energy transfer (FRET) with two different specific probes was established. To assess the precision and reproducibility of real-time PCR the intra-assay precision was determined in six consecutive assays.

Results:

No cross-reactivity of the hybridization probes with the DNA of non-C. albicans species or human genomic DNA was observed, which confirmed its 100% specificity. The minimum limit detected was one C. albicans cell or 10⁰ CFU/ml (10 fg) per PCR reaction. The real-time PCR efficiency rate for Candida was high (E = 1.95). Melting curve analysis of C. albicans showed a specific melting peak temperature of 65.76 °C.

Conclusion:

The real-time PCR assay we developed is highly specific and sufficiently sensitive to detect the fungal load for early diagnosis of invasive candidiasis. Key Words: Invasive candidiasis, Real-time PCR, Candida albicans     

Optimized Pan-species and Speciation Duplex Real-time PCR Assays for Plasmodium Parasites Detection in Malaria Vectors

Background

An accurate method for detecting malaria parasites in the mosquito’s vector remains an essential component in the vector control. The Enzyme linked immunosorbent assay specific for circumsporozoite protein (ELISA-CSP) is the gold standard method for the detection of malaria parasites in the vector even if it presents some limitations. Here, we optimized multiplex real-time PCR assays to accurately detect minor populations in mixed infection with multiple Plasmodium species in the African malaria vectors Anopheles gambiae and Anopheles funestus.

Methods

Complementary TaqMan-based real-time PCR assays that detect Plasmodium species using specific primers and probes were first evaluated on artificial mixtures of different targets inserted in plasmid constructs. The assays were further validated in comparison with the ELISA-CSP on 200 field caught Anopheles gambiae and Anopheles funestus mosquitoes collected in two localities in southern Benin.

Results

The validation of the duplex real-time PCR assays on the plasmid mixtures demonstrated robust specificity and sensitivity for detecting distinct targets. Using a panel of mosquito specimen, the real-time PCR showed a relatively high sensitivity (88.6%) and specificity (98%), compared to ELISA-CSP as the referent standard. The agreement between both methods was “excellent” (κ = 0.8, P<0.05). The relative quantification of Plasmodium DNA between the two Anopheles species analyzed showed no significant difference (P = 0, 2). All infected mosquito samples contained Plasmodium falciparum DNA and mixed infections with P. malariae and/or P. ovale were observed in 18.6% and 13.6% of An. gambiae and An. funestus respectively. Plasmodium vivax was found in none of the mosquito samples analyzed.

Conclusion

This study presents an optimized method for detecting the four Plasmodium species in the African malaria vectors. The study highlights substantial discordance with traditional ELISA-CSP pointing out the utility of employing an accurate molecular diagnostic tool for detecting malaria parasites in field mosquito populations.     

An efficient strategy for broad-range detection of low abundance bacteria without DNA decontamination of PCR reagents

Background

Bacterial DNA contamination in PCR reagents has been a long standing problem that hampers the adoption of broad-range PCR in clinical and applied microbiology, particularly in detection of low abundance bacteria. Although several DNA decontamination protocols have been reported, they all suffer from compromised PCR efficiency or detection limits. To date, no satisfactory solution has been found.

Methodology/Principal Findings

We herein describe a method that solves this long standing problem by employing a broad-range primer extension-PCR (PE-PCR) strategy that obviates the need for DNA decontamination. In this method, we first devise a fusion probe having a 3′-end complementary to the template bacterial sequence and a 5′-end non-bacterial tag sequence. We then hybridize the probes to template DNA, carry out primer extension and remove the excess probes using an optimized enzyme mix of Klenow DNA polymerase and exonuclease I. This strategy allows the templates to be distinguished from the PCR reagent contaminants and selectively amplified by PCR. To prove the concept, we spiked the PCR reagents with Staphylococcus aureus genomic DNA and applied PE-PCR to amplify template bacterial DNA. The spiking DNA neither interfered with template DNA amplification nor caused false positive of the reaction. Broad-range PE-PCR amplification of the 16S rRNA gene was also validated and minute quantities of template DNA (10–100 fg) were detectable without false positives. When adapting to real-time and high-resolution melting (HRM) analytical platforms, the unique melting profiles for the PE-PCR product can be used as the molecular fingerprints to further identify individual bacterial species.

Conclusions/Significance

Broad-range PE-PCR is simple, efficient, and completely obviates the need to decontaminate PCR reagents. When coupling with real-time and HRM analyses, it offers a new avenue for bacterial species identification with a limited source of bacterial DNA, making it suitable for use in clinical and applied microbiology laboratories.     

Multiplex Real-Time PCR Diagnostic of Relapsing Fevers in Africa

Background

In Africa, relapsing fever borreliae are neglected arthropod-borne pathogens causing mild to deadly septicemia and miscarriage. The closely related Borrelia crocidurae, Borrelia duttonii, Borrelia recurrentis and Borrelia hispanica are rarely diagnosed at the species level, hampering refined epidemiological and clinical knowledge of the relapsing fevers. It would be hugely beneficial to have simultaneous detection and identification of Borrelia to species level directly from clinical samples.

Methodology/Principal Findings

We designed a multiplex real-time PCR protocol targeting the 16S rRNA gene detecting all four Borrelia, the glpQ gene specifically detecting B. crocidurae, the recN gene specifically detecting B. duttonii/B. recurrentis and the recC gene specifically detecting B. hispanica. Compared to combined 16S rRNA gene and flaB gene sequencing as the gold standard, multiplex real-time PCR analyses of 171 Borrelia-positive and 101 Borrelia-negative control blood specimens yielded 100% sensitivity and specificity for B. duttonii/B. recurrentis and B. hispanica and 99% sensitivity and specificity for B. crocidurae.

Conclusions/Significance

The multiplex real-time PCR developed in this study is a rapid technique for both molecular detection and speciation of relapsing fever borreliae from blood in Africa. It could be incorporated in point-of-care laboratory to confirm diagnosis and provide evidence of the burden of infection attributed to different species of known or potentially novel relapsing fever borreliae.     

PRISE2: Software for designing sequence-selective PCR primers and probes

Background

PRISE2 is a new software tool for designing sequence-selective PCR primers and probes. To achieve high level of selectivity, PRISE2 allows the user to specify a collection of target sequences that the primers are supposed to amplify, as well as non-target sequences that should not be amplified. The program emphasizes primer selectivity on the 3’ end, which is crucial for selective amplification of conserved sequences such as rRNA genes. In PRISE2, users can specify desired properties of primers, including length, GC content, and others. They can interactively manipulate the list of candidate primers, to choose primer pairs that are best suited for their needs. A similar process is used to add probes to selected primer pairs. More advanced features include, for example, the capability to define a custom mismatch penalty function. PRISE2 is equipped with a graphical, user-friendly interface, and it runs on Windows, Macintosh or Linux machines.

Results

PRISE2 has been tested on two very similar strains of the fungus Dactylella oviparasitica, and it was able to create highly selective primers and probes for each of them, demonstrating the ability to create useful sequence-selective assays.

Conclusions

PRISE2 is a user-friendly, interactive software package that can be used to design high-quality selective primers for PCR experiments. In addition to choosing primers, users have an option to add a probe to any selected primer pair, enabling design of Taqman and other primer-probe based assays. PRISE2 can also be used to design probes for FISH and other hybridization-based assays.     

A novel multiplex real-time PCR for the identification of mycobacteria associated with zoonotic tuberculosis

Background

Tuberculosis (TB) is the leading cause of death worldwide from a single infectious agent. An ability to detect the Mycobacterium tuberculosis complex (MTC) in clinical material while simultaneously differentiating its members is considered important. This allows for the gathering of epidemiological information pertaining to the prevalence, transmission and geographical distribution of the MTC, including those MTC members associated with zoonotic TB infection in humans. Also differentiating between members of the MTC provides the clinician with inherent MTC specific drug susceptibility profiles to guide appropriate chemotherapy.

Methodology/Principal Findings

The aim of this study was to develop a multiplex real-time PCR assay using novel molecular targets to identify and differentiate between the phylogenetically closely related M. bovis, M. bovis BCG and M. caprae. The lpqT gene was explored for the collective identification of M. bovis, M. bovis BCG and M. caprae, the lepA gene was targeted for the specific identification of M. caprae and a Region of Difference 1 (RD1) assay was incorporated in the test to differentiate M. bovis BCG. The multiplex real-time PCR assay was evaluated on 133 bacterial strains and was determined to be 100% specific for the members of the MTC targeted.

Conclusions/Significance

The multiplex real-time PCR assay developed in this study is the first assay described for the identification and simultaneous differentiation of M. bovis, M. bovis BCG and M. caprae in one internally controlled reaction. Future validation of this multiplex assay should demonstrate its potential in the rapid and accurate diagnosis of TB caused by these three mycobacteria. Furthermore, the developed assay may be used in conjunction with a recently described multiplex real-time PCR assay for identification of the MTC and simultaneous differentiation of M. tuberculosis, M. canettii resulting in an ability to differentiate five of the eight members of the MTC.     

Development of a Real-Time PCR for Identification of Brachyspira Species in Human Colonic Biopsies

Background

Brachyspira species are fastidious anaerobic microorganisms, that infect the colon of various animals. The genus contains both important pathogens of livestock as well as commensals. Two species are known to infect humans: B. aalborgi and B. pilosicoli. There is some evidence suggesting that the veterinary pathogenic B. pilosicoli is a potential zoonotic agent, however, since diagnosis in humans is based on histopathology of colon biopsies, species identification is not routinely performed in human materials.

Methods

The study population comprised 57 patients with microscopic evidence of Brachyspira infection and 26 patients with no histopathological evidence of Brachyspira infection. Concomitant faecal samples were available from three infected patients. Based on publically available 16S rDNA gene sequences of all Brachyspira species, species-specific primer sets were designed. DNA was extracted and tested by real-time PCR and 16S rDNA was sequenced.

Results

Sensitivity and specificity for identification of Brachyspira species in colon biopsies was 100% and 87.7% respectively. Sequencing revealed B. pilosicoli in 15.4% of patients, B. aalborgi in 76.9% and a third species, tentatively named “Brachyspira hominis”, in 26.2%. Ten patients (12.3%) had a double and two (3.1%) a triple infection. The presence of Brachyspira pilosicoli was significantly associated with inflammatory changes in the colon-biopsy (p = 0.028).

Conclusions

This newly designed PCR allows for sub-differentiation of Brachyspira species in patient material and thus allows large-scaled surveillance studies to elucidate the pathogenicity of human Brachyspira infections. One-third of affected patients appeared to be infected with a novel species.     

New strategy for rapid diagnosis and characterization of fungal infections: the example of corneal scrapings

Purpose

The prognosis of people infected with Fungi especially immunocompromised depends on rapid and accurate diagnosis to capitalize on time administration of specific treatments. However, cultures produce false negative results and nucleic-acid amplification techniques require complex post-amplification procedures to differentiate relevant fungal types. The objective of this work was to develop a new diagnostic strategy based on real-time polymerase-chain reaction high-resolution melting analysis (PCR-HRM) that a) detects yeasts and filamentous Fungi, b) differentiates yeasts from filamentous Fungi, and c) discriminates among relevant species of yeasts.

Methods

PCR-HRM detection limits and specificity were assessed with a) isolated strains; b) human blood samples experimentally infected with Fungi; c) blood experimentally infected with other infectious agents; d) corneal scrapings from patients with suspected fungal keratitis (culture positive and negative) and e) scrapings from patients with suspected bacterial, viral or Acanthamoeba infections. The DNAs were extracted and mixed with primers diluted in the MeltDoctor® HRM Master Mix in 2 tubes, the first for yeasts, containing the forward primer CandUn (5''CATGCCTGTTTGAGCGTC) and the reverse primer FungUn (5''TCCTCCGCTT ATTGATATGCT) and the second for filamentous Fungi, containing the forward primer FilamUn (5''TGCCTGTCCGAGCGTCAT) and FungUn. Molecular probes were not necessary. The yields of DNA extraction and the PCR inhibitors were systematically monitored.

Results

PCR-HRM detected 0.1 Colony Forming Units (CFU)/µl of yeasts and filamentous Fungi, differentiated filamentous Fungi from yeasts and discriminated among relevant species of yeasts. PCR-HRM performances were higher than haemoculture and sensitivity and specificity was 100% for culture positive samples, detecting and characterizing Fungi in 7 out 10 culture negative suspected fungal keratitis.

Conclusions

PCR-HRM appears as a new, sensitive, specific and inexpensive test that detects Fungi and differentiates filamentous Fungi from yeasts. It allows direct fungal detection from clinical samples and experimentally infected blood in less than 2.30 h after DNA extraction.     

Reducing amplification artifacts in high multiplex amplicon sequencing by using molecular barcodes

Background

PCR amplicon sequencing has been widely used as a targeted approach for both DNA and RNA sequence analysis. High multiplex PCR has further enabled the enrichment of hundreds of amplicons in one simple reaction. At the same time, the performance of PCR amplicon sequencing can be negatively affected by issues such as high duplicate reads, polymerase artifacts and PCR amplification bias. Recently researchers have made some good progress in addressing these shortcomings by incorporating molecular barcodes into PCR primer design. So far, most work has been demonstrated using one to a few pairs of primers, which limits the size of the region one can analyze.

Results

We developed a simple protocol, which enables the use of molecular barcodes in high multiplex PCR with hundreds of amplicons. Using this protocol and reference materials, we demonstrated the applications in accurate variant calling at very low fraction over a large region and in targeted RNA quantification. We also evaluated the protocol’s utility in profiling FFPE samples.

Conclusions

We demonstrated the successful implementation of molecular barcodes in high multiplex PCR, with multiplex scale many times higher than earlier work. We showed that the new protocol combines the benefits of both high multiplex PCR and molecular barcodes, i.e. the analysis of a very large region, low DNA input requirement, very good reproducibility and the ability to detect as low as 1 % mutations with minimal false positives (FP).

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1806-8) contains supplementary material, which is available to authorized users.     

Genetic characterization of Trypanosoma cruzi DTUs in wild Triatoma infestans from Bolivia: predominance of TcI

Background

The current persistence of Triatoma infestans (one of the main vectors of Chagas disease) in some domestic areas could be related to re-colonization by wild populations which are increasingly reported. However, the infection rate and the genetic characterization of the Trypanosoma cruzi strains infecting these populations are very limited.

Methodology/Principal Findings

Of 333 wild Triatoma infestans specimens collected from north to south of a Chagas disease endemic area in Bolivia, we characterized 234 stocks of Trypanosoma cruzi using mini-exon multiplex PCR (MMPCR) and sequencing the glucose phosphate isomerase (Gpi) gene. Of the six genetic lineages (“discrete typing units”; DTU) (TcI-VI) presently recognized in T. cruzi, TcI (99.1%) was overdominant on TcIII (0.9%) in wild Andean T. infestans, which presented a 71.7% infection rate as evaluated by microscopy. In the lowlands (Bolivian Chaco), 17 “dark morph” T. infestans were analyzed. None of them were positive for parasites after microscopic examination, although one TcI stock and one TcII stock were identified using MMPCR and sequencing.

Conclusions/Significance

By exploring large-scale DTUs that infect the wild populations of T. infestans, this study opens the discussion on the origin of TcI and TcV DTUs that are predominant in domestic Bolivian cycles.     

Real-Time Relative qPCR without Reference to Control Samples and Estimation of Run-Specific PCR Parameters from Run-Internal Mini-Standard Curves

Background

Real-Time quantitative PCR is an important tool in research and clinical settings. Here, we describe two new approaches that broaden the scope of real-time quantitative PCR; namely, run-internal mini standard curves (RIMS) and direct real-time relative quantitative PCR (drqPCR). RIMS are an efficient alternative to traditional standard curves and provide both run-specific and target-specific estimates of PCR parameters. The drqPCR enables direct estimation of target ratios without reference to conventional control samples.

Methodology/Principal Findings

In this study, we compared RIMS-based drqPCR with classical quantifications based on external standard curves and the “comparative Ct method”. Specifically, we used a raw real-time PCR dataset as the basis for more than two-and-a-half million simulated quantifications with various user-defined conditions. Compared with classical approaches, we found that RIMS-based drqPCR provided superior precision and comparable accuracy.

Conclusions/Significance

The obviation of referencing to control samples is attractive whenever unpaired samples are quantified. This may be in clinical and research settings; for instance, studies on chimerism, TREC quantifications, copy number variations etc. Also, lab-to-lab comparability can be greatly simplified.     

CRISPR Is an Optimal Target for the Design of Specific PCR Assays for Salmonella enterica Serotypes Typhi and Paratyphi A

Background

Serotype-specific PCR assays targeting Salmonella enterica serotypes Typhi and Paratyphi A, the causal agents of typhoid and paratyphoid fevers, are required to accelerate formal diagnosis and to overcome the lack of typing sera and, in some situations, the need for culture. However, the sensitivity and specificity of such assays must be demonstrated on large collections of strains representative of the targeted serotypes and all other bacterial populations producing similar clinical symptoms.

Methodology

Using a new family of repeated DNA sequences, CRISPR (clustered regularly interspaced short palindromic repeats), as a serotype-specific target, we developed a conventional multiplex PCR assay for the detection and differentiation of serotypes Typhi and Paratyphi A from cultured isolates. We also developed EvaGreen-based real-time singleplex PCR assays with the same two sets of primers.

Principal findings

We achieved 100% sensitivity and specificity for each protocol after validation of the assays on 188 serotype Typhi and 74 serotype Paratyphi A strains from diverse genetic groups, geographic origins and time periods and on 70 strains of bacteria frequently encountered in bloodstream infections, including 29 other Salmonella serotypes and 42 strains from 38 other bacterial species.

Conclusions

The performance and convenience of our serotype-specific PCR assays should facilitate the rapid and accurate identification of these two major serotypes in a large range of clinical and public health laboratories with access to PCR technology. These assays were developed for use with DNA from cultured isolates, but with modifications to the assay, the CRISPR targets could be used in the development of assays for use with clinical and other samples.     

Development of a Composite Measure of Product Adherence,Protocol Compliance,and Semen Exposure Using DNA and Protein Biomarkers for Topical HIV Prevention Studies

Background

Poor and inconsistent use of study products has hindered clinical HIV prevention studies. It is important to be able to monitor product adherence and protocol compliance in order to determine microbicide efficacy and safety more accurately. Current methods for monitoring adherence are subjective, non-specific, or invasive. Herein, we present a composite, objective measure of product adherence and protocol compliance to assess vaginal insertion, semen exposure and drug expulsion utilizing DNA, protein, and drug isolated directly from returned, vaginally used gel applicators.

Methods

DNA, vaginal cells, and residual tenofovir were isolated from vaginally inserted applicators. Vaginal and semen biomarkers were amplified using a multiplex PCR to determine vaginal insertion. Vaginal cells were fixed followed by cytokeratin 4 immunocytochemistry to confirm DNA assessment of vaginal insertion. Tenofovir was extracted and quantitated through LC-MS/MS.

Results

DNA isolated from vaginally inserted applicators were positive for vaginal bacteria DNA and the control eukaryotic gene, amelogenin, while manually handled, “sham”, applicators were negative for both. Semen exposure was independently determined by simultaneous amplification of one or both Y-chromosomal genes, SRY and TSPY4. Vaginal insertion determination by DNA analysis was further confirmed by positive cytokeratin 4 (CK4) immunocytochemistry of vaginal cells remaining on the gel applicators. On the contrary, sham applicators provided very few cells when swabbed, and they were all negative for CK4. CK4 was not found in epidermal cells from the hand. Drug expulsion was detected through quantitation of residual gel present on the surface of returned applicators. Sham applicators had no detectable tenofovir.

Conclusion

Utilizing a composite, triple marker based panel of DNA, protein, and drug present on the surface of returned vaginal gel applicators, it is possible to determine, objectively and non-invasively, product adherence, protocol compliance, and semen exposure in microbicide trials.     

Distinguishing Body Lice from Head Lice by Multiplex Real-Time PCR Analysis of the Phum_PHUM540560 Gene

Background

Body louse or head louse? Once removed from their environment, body and head lice are indistinguishable. Neither the morphological criteria used since the mid-18th century nor the various genetic studies conducted since the advent of molecular biology tools have allowed body lice and head lice to be differentiated. In this work, using a portion of the Phum_PHUM540560 gene from the body louse, we aimed to develop a multiplex real-time polymerase chain reaction (PCR) assay to differentiate between body and head lice in a single reaction.

Materials and Methods

A total of 142 human lice were collected from mono-infested hosts from 13 countries on five continents. We first identified the louse clade using a cytochrome b (CYTB) PCR sequence alignment. We then aligned a fragment of the Phum_PHUM540560 gene amplified from head and body lice to design-specific TaqMan^© FAM- and VIC-labeled probes.

Results

All the analyzed lice were Clade A lice. A total of 22 polymorphisms between the body and head lice were characterized. The multiplex real-time PCR analysis enabled the body and head lice to be distinguished in two hours. This method is simple, with 100% specificity and sensitivity.

Conclusions

We confirmed that the Phum_PHUM540560 gene is a useful genetic marker for the study of lice.     

Molecular Diagnosis of Urinary Tract Infections by Semi-Quantitative Detection of Uropathogens in a Routine Clinical Hospital Setting

Background

The objective of our study was the development of a semi-quantitative real-time PCR to detect uropathogens. Two multiplex PCR reactions were designed to detect Escherichia coli, Klebsiella spp., Enterobacter spp., Citrobacter spp., Proteus mirabilis, Enterococcus faecalis, and Pseudomonas aeruginosa. 16S based PCR was performed in parallel to detect Gram-positive and Gram-negative bacteria. Firstly to identify non-targeted agents of infection in the same urine specimen, and secondly to quantify background flora. The method was evaluated in comparison with standard bacterial culture, and a commercial PCR kit for detection of uropathogens.

Findings

Analysis with a known panel of 116 clinical isolates yielded a PCR specificity of 100%. Analysis of urine specimens from 211 patients revealed a high correlation of PCR Cq values with both culture positivity and quantity. Concordance between PCR and culture was 98% when both methods yielded results. PCR was found to be more sensitive than culture. With a cut-off Cq value of 33, the negative predictive value of PCR was 94%. The 16S PCR confirmed most results. One specimen was positive by 16S PCR suggesting another cause of infection not detected by the specific PCR assays.

Conclusion

We conclude that it is feasible to detect and identify uropathogens by multiplex real-time PCR assay.     

Cost-efficient multiplex PCR for routine genotyping of up to nine classical HLA loci in a single analytical run of multiple samples by next generation sequencing

Background

HLA genotyping by next generation sequencing (NGS) requires three basic steps, PCR, NGS, and allele assignment. Compared to the conventional methods, such as PCR-sequence specific oligonucleotide primers (SSOP) and -sequence based typing (SBT), PCR-NGS is extremely labor intensive and time consuming. In order to simplify and accelerate the NGS-based HLA genotyping method for multiple DNA samples, we developed and evaluated four multiplex PCR methods for genotyping up to nine classical HLA loci including HLA-A, HLA-B, HLA-C, HLA-DRB1/3/4/5, HLA-DQB1, and HLA-DPB1.

Results

We developed multiplex PCR methods using newly and previously designed middle ranged PCR primer sets for genotyping different combinations of HLA loci, (1) HLA-DRB1/3/4/5, (2) HLA-DQB1 (3.8 kb to 5.3 kb), (3) HLA-A, HLA-B, HLA-C, and (4) HLA-DPB1 (4.6 kb to 7.2 kb). The primer sets were designed to genotype polymorphic exons to the field 3 level or 6-digit typing. When we evaluated the PCR method for genotyping all nine HLA loci (9LOCI) using 46 Japanese reference subjects who represented a distribution of more than 99.5% of the HLA alleles at each of the nine HLA loci, all of the 276 alleles genotyped, except for HLA-DRB3/4/5 alleles, were consistent with known alleles assigned by the conventional methods together with relevant locus balance and no excessive allelic imbalance. One multiplex PCR method (9LOCI) was able to provide precise genotyping data even when only 1 ng of genomic DNA was used for the PCR as a sample template.

Conclusions

In this study, we have demonstrated that the multiplex PCR approach for NGS-based HLA genotyping could serve as an alternative routine HLA genotyping method, possibly replacing the conventional methods by providing an accelerated yet robust amplification step. The method also could provide significant merits for clinical applications with its ability to amplify lower quantity of samples and the cost-saving factors.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1514-4) contains supplementary material, which is available to authorized users.     

High-resolution melting molecular signatures for rapid identification of human papillomavirus genotypes

Background

Genotyping of human papillomarvirus (HPV) is crucial for patient management in a clinical setting. This study accesses the combined use of broad-range real-time PCR and high-resolution melting (HRM) analysis for rapid identification of HPV genotypes.

Methods

Genomic DNA sequences of 8 high-risk genotypes (HPV16/18/39/45/52/56/58/68) were subject to bioinformatic analysis to select for appropriate PCR amplicon. Asymmetric broad-range real-time PCR in the presence of HRM dye and two unlabeled probes specific to HPV16 and 18 was employed to generate HRM molecular signatures for HPV genotyping. The method was validated via assessment of 119 clinical HPV isolates.

Results

A DNA fragment within the L1 region was selected as the PCR amplicon ranging from 215–221 bp for different HPV genotypes. Each genotype displayed a distinct HRM molecular signature with minimal inter-assay variability. According to the HRM molecular signatures, HPV genotypes can be determined with one PCR within 3 h from the time of viral DNA isolation. In the validation assay, a 91% accuracy rate was achieved when the genotypes were in the database. Concomitantly, the HRM molecular signatures for additional 6 low-risk genotypes were established.

Conclusions

This assay provides a novel approach for HPV genotyping in a rapid and cost-effective manner.