A Versatile Stain for Pollen Fungi, Yeast and Bacteria

A versatile stain has been developed for demonstrating pollen, fungal hyphae and spores, bacteria and yeasts. The mixture is made by compounding in the following order: ethanol, 20 ml; 1% malachite green in 95% ethanol, 2 ml; distilled water, 50 ml; glycerol, 40 ml; acid fuchsin 1% in distilled water, 10 ml; phenol, 5 g and lactic acid, 1-6 ml. A solution has also been formulated to destain overstained pollen mounts. Ideally, aborted pollen grains are stained green and nonaborted ones crimson red. Fungal hyphae and spores take a bluish purple color and host tissues green. Fungi, bacteria and yeasts are stained purple to red. The concentration of lactic acid in the stain mixture plays an important role in the differential staining of pollen. For staining fungi, bacteria and yeasts, the stain has to be acidic, but its concentration is not critical except for bacteria. In the case of pollen, staining can be done in a drop of stain on a slide or in a few drops of stain in a vial. Pollen stained in the vial can be used immediately or stored for later use. Staining is hastened by lightly flaming the slides or by storing at 55±2 C for 24 hr. Bacteria and yeasts are fixed on the slide in the usual manner and then stained. The stock solution is durable, the staining mixture is very stable and the color of the mounted specimens does not fade on prolonged storage. Slides are semipermanent and it is not necessary to ring the coverslip provided 1-2 drops of stain are added if air bubbles appear below the coverslip. The use of differentially stained pollen mounts in image analyzers for automatic counting and recording of aborted and nonaborted pollen is also discussed.     

The Peracetic-Orcein-Halmi Stain: A Stain for Connective Tissues

A selective stain useful for the study of connective tissues is described. The stain demonstrates elastic and oxytalan fibers as well as fibrils in mucous connective tissues previously undescribed. Reticular fibers are not stained. The stain may be used on sections that have been fresh frozen or fixed in formalin or ethanol. Sections are deparaffinized, washed in absolute ethanol, oxidized in peracetic acid 30 min, washed in running water, stained in Taenzer-Unna orcein 15 min, 37°C, differentiated in 70% ethanol, washed in running water, stained in Lillie-Mayer alum hematoxylin 4 min, blued in running water, and counterstained 20 sec in a modified Halmi mixture of 100 ml distilled water, 0.2 gm light green SF, 1.0 gm orange G, 0.5 gm phosphotungstic acid and 1.0 ml glacial acetic acid. Sections are rinsed briefly in 0.2% acetic acid in 95% ethanol, dehydrated and mounted.     

Acetic Acid as a Diluent and Dehydrant in the Preparation of Whole, Stained Helminths

Aqueous 45% acetic acid can be used successfully as a diluent for Ehrlich's haematoxylin and for Horen's trichrome stain (chromotrope 2 R, 0.6 gm; phosphotungstic acid, 0.7 gm; glacial acetic acid, 1.0 ml; water, 100 ml). Glacial acetic acid is used for dehydration of the stained helminths, and followed by a glacial acetic acid-methyl salicylate series for clearing. The whole process can be completed within 1 hr, from fixation to the cleared specimen, with helminths up to 5 mm in length. A satisfactory fixative for Monogenea, Digenea and Acanthocephala is: 85% ethanol, 85; formalin (40% HCHO), 10; and glacial acetic acid, 5—parts by volume. For Cestoda, 5% aqueous formalin is preferable because they are hardened excessively by the alcoholic fixative.     

Staining Sex Chromatin; Biebrich Scarlet and Fast Green Fcf as a Mixture Versus Their Use in Sequence

Human skin was fixed in Davidson's solution (95% alcohol, 35; formalin, 20; glacial acetic acid, 10; and distilled water, 35—parts by volume) and sections prepared through paraffin embedding in the usual manner. Stock stains were: I(BS)—Biebrich scarlet, 1 gm in 100 ml of 50% alcohol to which 0.3 gm of phosphotungstic acid and 5 ml of glacial acetic acid were added—and II(FG)—fast green, 0.5 gm in 85 ml of 50% alcohol to which 0.3 gm of phosphotungstic acid, 0.3 gm of phosphomolybdic acid, and 15 ml of glacial acetic acid were added. Experimental staining solutions were prepared in the following proportions of stock BS to stock FG—1:1, 2:1, 3:1, 1:2 and 1:3. Sections were brought to 50% alcohol and stained for 15, 20, 25 and 30 min in each of the five BS-FG mixtures, rinsed in 50% alcohol, then dehydrated in 70%, 95%, and absolute alcohol, 2 min each; cleared in xylene, and covered in balsam. The 2:1 (optimum proportion) combination of BS with FG, acting for 20 min, yielded 97% sex chromatin-positive nuclei in female material. If sections were stained in stock solution BS for 2 min, they could be differentiated by a 20 min treatment in the mordanting component of stock FG (without dye) to give a one-color stain. Such stains gave about the same percentage of sex chromatin-positive nuclei as those obtained by the regular two-color procedure. These modifications are simpler, more rapid, and yield results comparable to previously employed techniques.     

Staining Sex Chromatin; Biebrich Scarlet and Fast Green Fcf as a Mixture Versus Their Use in Sequence

Human skin was fixed in Davidson's solution (95% alcohol, 35; formalin, 20; glacial acetic acid, 10; and distilled water, 35—parts by volume) and sections prepared through paraffin embedding in the usual manner. Stock stains were: I(BS)—Biebrich scarlet, 1 gm in 100 ml of 50% alcohol to which 0.3 gm of phosphotungstic acid and 5 ml of glacial acetic acid were added—and II(FG)—fast green, 0.5 gm in 85 ml of 50% alcohol to which 0.3 gm of phosphotungstic acid, 0.3 gm of phosphomolybdic acid, and 15 ml of glacial acetic acid were added. Experimental staining solutions were prepared in the following proportions of stock BS to stock FG—1:1, 2:1, 3:1, 1:2 and 1:3. Sections were brought to 50% alcohol and stained for 15, 20, 25 and 30 min in each of the five BS-FG mixtures, rinsed in 50% alcohol, then dehydrated in 70%, 95%, and absolute alcohol, 2 min each; cleared in xylene, and covered in balsam. The 2:1 (optimum proportion) combination of BS with FG, acting for 20 min, yielded 97% sex chromatin-positive nuclei in female material. If sections were stained in stock solution BS for 2 min, they could be differentiated by a 20 min treatment in the mordanting component of stock FG (without dye) to give a one-color stain. Such stains gave about the same percentage of sex chromatin-positive nuclei as those obtained by the regular two-color procedure. These modifications are simpler, more rapid, and yield results comparable to previously employed techniques.     

A One-Solution Triacid General Stain Which Differentiates Oxygenated from Non-Oxygenated Red Blood Corpuscles

Tissues from representative mammals, amphibia and invertebrates were fixed for 5-24 hr in either an aqueous solution of 8% p-toluene sulfonic acid (PTSA) or in 10% formalin to which 5 gm PTSA/100 ml had been added, and processed through embedding in polyethylene glycol 400 distearate in the usual manner. Sections cut at 4-6 μ were floated on 0.2% gelatin containing 1.25% formalin, and spread and dried on slides at a temperature not exceeding 25 C. Wax was removed with xylene, and the sections brought to water through ethanol as usual. The working staining solution was made from three stock solutions: A. Chlorantine fast blue 2RLL, 0.5%; B. Cibacron turquoise blue G-E, 0.5%; C. Procion red M-P, 0.5%—each of which was dissolved in 98.5 ml of distilled water to which 0.5 ml of glacial acetic acid and 0.5 ml of propylene glycol monophenyl ether (a fungicide) had been added. For use, the three solutions were mixed in the proportions: A, 3; B, 4; and C, 3 volumes. Staining time was uncritical, 10-30 min usually sufficing for 6 μ, sections. The chief feature of the staining is the differentiation of oxygenated and nonoxygenated red blood corpuscles, in reds and blues respectively. Connective tissue stained blue or blue-green and mucin, green. Nuclei and cytoplasm stain according to their condition at the time of fixation. The mixed stain keeps well, remaining active after 2 yr of storage.     

A Method for Staining Pollen Tubes in Pistil

A quadruple staining procedure has been developed for staining pollen tubes in pistil. The staining mixture is made by adding the following in the order given: lactic acid, 80 ml; 1% aqueous malachite green, 4 ml; 1% aqueous acid fuchsia, 6 ml; 1% aqueous aniline blue, 4 ml; 1 % orange G in 50% alcohol, 2 ml; and chloral hydrate, 5 g. Pistils are fixed for 6 hr in modified Carnoy's fluid (absolute alcohol:chloroform:glacial acetic acid 6:4:1), hydrated in descending alcohols, transferred to stain and held there for 24 hr at 45±2 C They were then transferred to a clearing and softening fluid containing 78 ml lactic acid, 10 g phenol, 10 g chloral hydrate and 2 ml 1% orange G. The pistils were held there for 24 hr at 45±2 C, hydrolyzed in the clearing and softening fluid at 58±1 C for SO min, then stored in lactic acid for later use or immediately mounted in a drop of medium containing equal parts of lactic acid and glycerol for examination. Pollen tubes are stained dark blue to bluish red and stylar tissue light green to light greenish blue. This stain permits pollen tubes to be traced even up to their entry into the micropyle.     

A method for staining pollen tubes in pistil

A quadruple staining procedure has been developed for staining pollen tubes in pistil. The staining mixture is made by adding the following in the order given: lactic acid, 80 ml; 1% aqueous malachite green, 4 ml; 1% aqueous acid fuchsin, 6 ml; 1% aqueous aniline blue, 4 ml; 1% orange G in 50% alcohol, 2 ml; and chloral hydrate, 5 g. Pistils are fixed for 6 hr in modified Carnoy's fluid (absolute alcohol:chloroform:glacial acetic acid 6:4:1), hydrated in descending alcohols, transferred to stain and held there for 24 hr at 45 +/- 2 C. They were then transferred to a clearing and softening fluid containing 78 ml lactic acid, 10 g phenol, 10 g chloral hydrate and 2 ml 1% orange G. The pistils were held there for 24 hr at 45 +/- 2 C, hydrolyzed in the clearing and softening fluid at 58 +/- 1 C for 30 min, then stored in lactic acid for later use or immediately mounted in a drop of medium containing equal parts of lactic acid and glycerol for examination. Pollen tubes are stained dark blue to bluish red and stylar tissue light green to light greenish blue. This stain permits pollen tubes to be traced even up to their entry into the micropyle.     

A Tetrachrome Stain for Fresh, Mineralized Bone Sections, Useful in the Diagnosis of Bone Diseases

Fresh, unprocessed bone is ground to sections 75-100 μ thick, stained in an aqueous solution composed of fast green FCF, 0.1 gm; orange G, 2.0 gm; distilled water, 100.0 ml; and adjusted to pH 6.65, then in a mixture of 1 part alcoholic solution of 0.25% celestine blue B and 9 parts of alcoholic solution of 0.1% basic fuchsin. Surface stain is removed by grinding sections to 50 μ and washing them in 1% invert soap (Zephiran) to remove adherent debris. (Commercial detergents and alkaline soaps may interfere with chromophore groups of the dyes.) Wash in tap water; rinse in distilled water and differentiate in 1% acetic alcohol. Dehydrate in ascending alcohols, clear in xylene and mount permanently in a neutral, synthetic resin. Active osteoid seams stain dark to light green; resting osteoid seams, red to bright orange red; transitional osteoid seams, geenish-yellow, orange red to red; older, partly mineralized matrix, orange; new, partly mineralized matrix, red; osteocyte nuclei, red; osteoblasts and osteoclasts, greenish-blue to dark purple nuclei and green or light green cytoplasm. Hyper-trophic and differentiating cartilage cells are stained light pink and dark red respectively. The staining reactions are consistent; the solutions are stable.     

A Six-Dye Staining Schedule for Sections of Mesquite and Other Desert Plants

Materials are fixed in FPA (formalin, 2; propionic acid, 1; 70% ethanol, 17). Paraffin sections on slides are brought to 50% ethanol and stained as follows: (1) in Bismarck brown Y, a 0.02% solution in 0.1% aqueous phenol, 10-30 min; wash 30 sec in 0.7% acetic acid, and wash in distilled water 20-30 sec; (2) in crystal violet, 1% in 70% ethanol alkalinized with 1 drop of 1 N NaOH per 100 ml, 12-35 min; wash 30-60 sec in tap water to remove excess stain, and rinse 0.5 sec in 70% ethanol; then mordant in I₂-KI, 1% each in 70% ethanol, 40 sec, and rinse in 70% ethanol 2-5 sec; (3) in a mixture containing 0.4% acid fuchsin and 0.6% crythrosin B in 70% ethanol about 0.5 sec; rinse in 70% ethanol 5-15 sec to remove excess red; dehydrate in 70%, 95%, and absolute ethanol, 2-3 sec each; (4) in fast green FCF, 0.5% in a mixture of equal parts of methyl cellosolve, absolute ethanol, and clove oil, 5-15 sec; rinse in a mixture of clove oil, 10 ml; absolute ethanol, 100 ml; and methyl cellosolve, 10 ml, 5-7 sec; (5) in orange G, 0.75 gm in a mixture of clove oil, 40 ml; absolute ethanol, 40 ml; and methyl cellosolve, 60 ml, 5-30 sec; rinse clean in a 1:1 mixture of xylene and absolute ethanol, 5-20 sec Complete the clearing in pure xylene, 3 changes, 1.5 min in each, and apply a cover glass with synthetic resin. Slides are agitated in all steps except Bismark brown Y, crystal violet, and the xylenes. Contrast and staining intensity are adjusted by varying staining times in the dye solutions.     

Handling Germinated Pollen on Millipore Membrane During the Feulgen and Autoradiographic Procedures

To prevent loss of pollen during the Feulgen's procedure, the pollen was grown on an autoclaved membrane filter (Millipore AA WP 025 00) in contact with a sterilized medium containing agar 0.5-1%, sucrose according to the genus (Malus 0.3-0.5 M; Persica and Tulipa 0.4 M), and H₃BO₃, 0.01%. To fix the germinated pollen of most species, the membrane was placed for 2 hr to overnight at 2-4 C on filter paper wet with the following mixture: OsO₄, 1 gm; CrO₃, 1.66 gm; and distilled water, 233 ml. To fix Persica pollen, 10% of glacial acetic acid had to be added to the fixative. Washing with distilled water and bleaching with a mixture of 3% H₂O₂ and sat. aq. ammonium oxalate, 1:1, were performed also on filter paper. Similarly, the preparation was processed for Feulgen staining by use of pieces of filter paper wet with the required fluids. Hydrolysis preceding the Schiff's reagent was performed at room temperature with 5 N HCl for 18 min. The differentiation after the Schiff's action was with 2% K₂S₂O₅ buffered to pH 2.3 with 9 ml of phosphate buffer (KH₂PO₄, 1.4 gm; conc. HCl, 0.35 ml and distilled water to make 100 ml). The stained pollen was floated off the membrane with a drop of glacial acetic acid to a gelatinized or an albumenized slide, and squashed. When the coverslip is removed the preparation may be either dehydrated and mounted or coated with autoradiographic film.     

Differentiated Staining of Osmium Tetroxide-Fixed, Vestopal-w-Embedded Tissue in thin Sections

Tissues were fixed at 20° C for 1 hr in 1% OsO₄, buffered at pH 7.4 with veronal-acetate (Palade's fixative), soaked 5 min in the same buffer without OsO₄, then dehydrated in buffer-acetone mixtures of 30, 50, 75 and 90% acetone content, and finally in anhydrous acetone. Infiltration was accomplished through Vestopal-W-acetone mixtures of 1:3, 1:1, 3:1 to undiluted Vestopal. After polymerisation at 60° C for 24 hr, 1-2 μ sections were cut, dried on slides without adhesive, and stained by any of the following methods. (1) Mayer's acid hemalum: Flood the slides with the staining solution and allow to stand at 20°C for 2-3 hr while the water of the solution evaporates; wash in distilled water, 2 min; differentiate in 1% HCl; rinse 1-2 sec in 10% NH,OH. (2) Iron-trioxyhematein (of Hansen): Apply the staining solution as in method 1; wash 3-5 min in 5% acetic acid; restain for 1-12 hr by flooding with a mixture consisting of staining solution, 2 parts, and 1 part of a 1:1 mixture of 2% acetic acid and 2% H₂SO₄ (observe under microscope for staining intensity); wash 2 min in distilled water and 1 hr in tap water. (3) Iron-hematoxylin (Heidenhain): Mordant 6 hr in 2.5% iron-alum solution; wash 1 min in distilled water; stain in 1% or 0.5% ripened hematoxylin for 3-12 br; differentiate 8 min in 2.5%, and 15 min in 1% iron-alum solution; wash 1 hr in tap water. (4) Aceto-carmine (Schneider): Stain 12-24 hr; wash 0.5-1.0 min in distilled water. (5) Picrofuchsin: Stain 24-48 hr in 1% acid fuchsin dissolved in saturated aqueous picric acid; differentiate for only 1-2 sec in 96% ethanol. (6) Modified Giemsa: Mix 640 ml of a solution of 9.08 gm KH₂PO₄ in 1000 ml of distilled water and 360 ml of a solution of 11.88 gm Na₂HPO₄-2H₂O in 1000 ml of distilled water. Soak sections in this buffer, 12 hr. Dissolve 1.0 gm of azur I in 125 ml of boiling distilled water; add 0.5 gm of methylene blue; filter and add hot distilled water until a volume of 250 ml is reached (solution “AM”). Dissolve 1.5 gm of eosin, yellowish, in 250 ml of hot distilled water; filter (solution “E”). Mix 1.5 ml of “AM” in 100 ml of buffer with 3 ml of “E” in 100 ml of buffer. Stain 12-24 hr. Differentiate 3 sec in 25 ml methyl benzoate in 75 ml dioxane; 3 sec in 35 ml methyl benzoate in 65 ml acetone; 3 sec in 30 ml acetone in 70 ml methyl benzoate; and 3 sec in 5 ml acetone in 95 ml methyl benzoate. Dehydrated sections may be covered in a neutral synthetic resin (Caedax was used).     

A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

A Copper Sulfate-Silver Nitrate Method for Nerve Fibers of Planarians

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

The Use of Lacto-Propionic Orcein in Rapid Squash Methods for Chromosome Preparations

A solution of 2 gm of natural orcein dissolved in 100 ml of a mixture of equal parts of lactic and propionic acids, and diluted to 45% with water, proved more effective than other stain fixatives for meiotic preparations from fresh pollen mother cells. When used after 5 min fixation in modified Carnoy's fixative (alcohol, acetic acid, chloroform, formalin; 10:2:2:1) and 5 min maceration in 1 N HC1 at 60° C, the same stain proved the most suitable for the rapid preparation of root-tip chromosomes for counting and for studying detailed morphology.     

Differentiation of Mastocyte Granules by Tartrazine Counterstaining After the Periodic Acid-Schiff Procedure

When the periodic acid-Schiff stain is followed by a counterstain of 1% tartrazine O in 1% acetic acid, mastocyte granules turn to a brick-orange color. Pharyngeal and intestinal mucus remain unchanged and gastric mucus is only slightly affected. The best results were obtained after fixation in Cajal-De Castro fluid (95% ethanol, 50 ml; distilled water, 50 ml; chloral hydrate, 5-10 gm; and nitric acid, 5 ml).     

Mercuric Bromphenol Blue Staining of Precipitin Lines in Agar

Lines formed by antibody-organ antigen reactions are stained particularly well by a modification utilizing the mercuric bromphenol blue (MBB) mixture of Mazia et al. (Biol. Bull., 104: 57-67, 1953). The agar covered slides are placed overnight in 0.85% NaCI at 4 C, followed by washing for 2 hr in 0.85% NaCI at 25 C. They are then rinsed for 10 min in distilled water, and dried overnight at 37 C. The precipitin lines are fixed by immersing the slides for 25 min in 95% alcohol, followed by 5 min hydration in distilled water. They are stained for 25 min in MBB mixture (HgCI₂, 10 gm; bromphenol blue, 0.1 gm; 95% ethanol, 100 ml). Excess stain is removed by immersing in acidified alcohol (95% ethanol, 98 ml; glacial acetic acid, 2 ml). Finally, the slides are passed through alcohol and xylene, and resin-mounted under coverslips.     

Staining Raw and Cooked Apple Tissues for Study of Cell Wall Structure

Permanent preparations were made of paraffin sections from raw and cooked apple tissues stained with microchemical color reagents for pectins and pentosans. Sections stained with ruthenium red to show pectins were dehydrated and covered in balsam, and sections stained with diphenylene diamine acetate (DDA) to show pentosans were washed with water and covered in Clearcol.

Cooking was accomplished by steaming cubed histological samples. Both raw and steamed specimens were fixed in FAA in a vacuum chamber, dehydrated and cleared in tertiary butyl alcohol, and embedded in paraffin. Paraffin sections first fixed to slides with Haupt's adhesive were further stabilized by immersing in a 1% celloidin solution after dissolving the paraffin.

Ruthenium oxychloride flakes were dissolved in a Coplin jar of water containing 2 drops of ammonium hydroxide. Rehydrated sections were stained in ruthenium red 30 minutes and rinsed in water. Three methods of further preparation follow: (1) Flood sections with 10% gum arabic; drain and air-dry thoroughly; immerse in xylene 5 minutes; cover in balsam. (2) Drain and air-dry sections; if desired, counterstain dry sections with Johansen's fast green solution; immerse in xylene; cover in balsam. (3) Dehydrate by dipping in 70%, 95%, and absolute ethyl alcohol; immerse in xylene; cover in balsam.

DDA was made by heating 15 g. of benzidine in 150 ml. of glacial acetic acid and 450 ml. of water until dissolved, then adding water to make 750 ml. of solution. Rehydrated sections were stained 4 hours in DDA, washed, stained 5 minutes in Congo red (Congo red, 5 g.; NaOH, 5 g.; water, 100 ml.), washed, and covered in Clearcol.

An Autotechnicon was used for dehydration, clearing, infiltration, deparaffinizing sections, and staining. Procedures that necessarily remained manual were fixation in a vacuum chamber, and all operations that followed staining.

Ruthenium red, though the best available indicator for pectins, may not be specific for these substances. DDA and ruthenium red stained identical structures in hypodermis and cortex. DDA also stained cuticle, hence was more useful than ruthenium red for delineating that portion. DDA sections were better for photomicrography, and for measuring thickness of cell walls. Neither stain prevented the study of cell walls in polarized light.