Influence of carbon steel grade on the initial attachment of bacteria and microbiologically influenced corrosion

The influence of the composition and microstructure of different carbon steel grades on the initial attachment (≤ 60 min) of Escherichia coli and subsequent longer term (28 days) corrosion was investigated. The initial bacterial attachment increased with time on all grades of carbon steel. However, the rate and magnitude of bacterial attachment varied on the different steel grades and was significantly less on the steels with a higher pearlite phase content. The observed variations in the number of bacterial cells attached across different steel grades were significantly reduced by applying a fixed potential to the steel samples. Longer term immersion studies showed similar levels of biofilm formation on the surface of the different grades of carbon steel. The measured corrosion rates were significantly higher in biotic conditions compared to abiotic conditions and were found to be positively correlated with the pearlite phase content of the different grades of carbon steel coupons.     

Oxygen and pH microprofiles above corroding mild steel covered with a biofilm

O₂ and pH microprofiles were measured above corroding mild steel covered with a biofilm. The pH in the anodic areas (tubercles) ranged from 5 to 7 and was always 9.45 at the surface of the cathodic areas. After 1 month of biofilm development, O₂ was depleted at the anodic area but could reach the cathodic surface where it was reduced. Consequently, differential O₂ concentration cells were the driving force for corrosion. The O₂ microprofiles indicated that O₂ was consumed in the tubercles, probably by microbial activity, while O₂ was reduced electrochemically in the cathodic areas. It was concluded that O₂ transfer to the cathodic surface was the rate limiting step for the corrosion process.     

Importance of biofilm formation for corrosion inhibition of SAE 1018 steel by axenic aerobic biofilms

To investigate if corrosion inhibition by aerobic biofilms is a general phenomenon, carbon steel (SAE 1018) coupons were exposed to a complex liquid medium (Luria–Bertani) and seawater-mimicking medium (VNSS) containing fifteen different pure-culture bacterial suspensions representing seven genera. Compared to sterile controls, the mass loss in the presence of these bacteria (which are capable of developing a biofilm to various degrees) decreased by 2- to 15-fold. The extent of corrosion inhibition in LB medium depended on the nature of the biofilm: an increased proportion of live cells, observed with confocal scanning laser microscopy (CSLM) and image analysis, decreased corrosion. Corrosion inhibition in LB medium was greatest with Pseudomonas putida (good biofilm formation), while metal coupons exposed to Streptomyces lividans in LB medium (poor biofilm formation) corroded in a manner similar to the sterile controls. Pseudomonas mendocina KR1 reduced corrosion the most in VNSS. It appears that only a small layer of active, respiring cells is required to inhibit corrosion, and the corrosion inhibition observed is due to the attached biofilm. Received 09 December 1996/ Accepted in revised form 19 March 1997     

Effect of electric currents on bacterial detachment and inactivation

Since biofilms show strong resistance to conventional disinfectants and antimicrobials, control of initial bacterial adhesion is generally accepted as one of the most effective strategies for preventing biofilm formation. Although electrical methods have been widely studied, the specific properties of cathodic, anodic, and block currents that influence the bacterial detachment and inactivation remained largely unclear. This study investigated the specific role of electric currents in the detachment and inactivation of bacteria adhered to an electrode surface. A real-time bacterial adhesion observation and control system was employed that consisted of Pseudomonas aeruginosa PAO1 (PAO1) with green fluorescent protein as the indicator microorganism and a flow cell reactor mounted on a fluorescent microscope. The results suggest that the bacteria that remained on the electrode surface after application of a cathodic current were alive, although the extent of detachment was significant. In contrast, when an anodic current was applied, the bacteria that remained on the surface became inactive with time, although bacterial detachment was not significant. Further, under these conditions, active bacterial motions were observed, which weakened the binding between the electrode surface and bacteria. This phenomenon of bacterial motion on the surface can be used to maximize bacterial detachment by manipulation of the shear rate. These findings specific for each application of a cathodic or anodic electric current could successfully explain the effectiveness of block current application in controlling bacterial adhesion.     

The role of bacteria in pit propagation of carbon steel

Pit propagation in carbon steel exposed to a phosphate-containing electrolyte required either stagnant conditions or microbial colonization of anodic regions. A scanning vibrating electrode (SVE) was used to resolve formation and inactivation of anodic and cathodic sites on carbon steel. In sterile, continuously aerated medium, pits initiated and repassivated, while in the absence of aeration, pits initiated and propagated. Pit propagation was also observed in continuously aerated medium inoculated with a heterotrophic bacterium, originally isolated from a corrosion tubercle formed on a steel pipe in a fresh water environment. Autoradiography of bacteria following uptake of (14)C-acetate into cellular material in combination with SVE analysis demonstrated that sites of anodic activity coincided with sites of bacterial activity. Prelabeled bacteria also preferentially attached to corrosion products over the anodic sites. Confocal laser scanning microscopy demonstrated that attraction to anodic sites did not depend on bacterial viability and was not specific for iron as a substratum. The results suggest that bacteria may preferentially attach to the corrosion products formed over corrosion pits. The biofilms over these anodic sites may create stagnant conditions within corrosion pits that result in pit propagation.     

Distinct roles of extracellular polymeric substances in Pseudomonas aeruginosa biofilm development

Bacteria form surface attached biofilm communities as one of the most important survival strategies in nature. Biofilms consist of water, bacterial cells and a wide range of self-generated extracellular polymeric substances (EPS). Biofilm formation is a dynamic self-assembly process and several distinguishable stages are observed during bacterial biofilm development. Biofilm formation is shown to be coordinated by EPS production, cell migration, subpopulation differentiation and interactions. However, the ways these different factors affect each other and contribute to community structural differentiation remain largely unknown. The distinct roles of different EPS have been addressed in the present report. Both Pel and Psl polysaccharides are required for type IV pilus-independent microcolony formation in the initial stages of biofilm formation by Pseudomonas aeruginosa PAO1. Both Pel and Psl polysaccharides are also essential for subpopulation interactions and macrocolony formation in the later stages of P. aeruginosa PAO1 biofilm formation. Pel and Psl polysaccharides have different impacts on Pseudomonas quinolone signal-mediated extracellular DNA release in P. aeruginosa PAO1 biofilms. Psl polysaccharide is more important than Pel polysaccharide in P. aeruginosa PAO1 biofilm formation and antibiotic resistance. Our study thus suggests that different EPS materials play distinct roles during bacterial biofilm formation.     

Opr86 is essential for viability and is a potential candidate for a protective antigen against biofilm formation by Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic bacterial pathogen that is one of the most refractory to therapy when it forms biofilms in the airways of cystic fibrosis patients. To date, studies regarding the production of an immunogenic and protective antigen to inhibit biofilm formation by P. aeruginosa have been superficial. The previously uncharacterized outer membrane protein (OMP) Opr86 (PA3648) of P. aeruginosa is a member of the Omp85 family, of which homologs have been found in all gram-negative bacteria. Here we verify the availability of Opr86 as a protective antigen to inhibit biofilm formation by P. aeruginosa PAO1 and several other isolates. A mutant was constructed in which Opr86 expression could be switched on or off through a tac promoter-controlled opr86 gene. The result, consistent with previous Omp85 studies, showed that Opr86 is essential for viability and plays a role in OMP assembly. Depletion of Opr86 resulted in streptococci-like morphological changes and liberation of excess membrane vesicles. A polyclonal antibody against Opr86 which showed reactivity to PAO1 cells was obtained. The antibody inhibited biofilm formation by PAO1 and the other clinical strains tested. Closer examination of early attachment revealed that cells treated with the antibody were unable to attach to the surface. Our data suggest that Opr86 is a critical OMP and a potential candidate as a protective antigen against biofilm formation by P. aeruginosa.     

The galactophilic lectin, LecA, contributes to biofilm development in Pseudomonas aeruginosa

LecA (PA-IL) is a cytotoxic lectin and adhesin produced by Pseudomonas aeruginosa which binds hydrophobic galactosides with high specificity and affinity. By using a lecA-egfp translation fusion and immunoblot analysis of the biofilm extracellular matrix, we show that lecA is expressed in biofilm-grown cells. In static biofilm assays on both polystyrene and stainless steel, biofilm depth and surface coverage was reduced by mutation of lecA and enhanced in the LecA-overproducing strain PAO-P47. Biofilm surface coverage by the parent strain, PAO-P47 but not the lecA mutant on steel coupons was also inhibited by growth in the presence of either isopropyl-beta-D-thiogalactoside (IPTG) or p-nitrophenyl-alpha-D-galactoside (NPG). Furthermore, mature wild-type biofilms formed in the absence of these hydrophobic galactosides could be dispersed by the addition of IPTG. In contrast, addition of p-nitrophenyl-alpha-L-fucose (NPF) which has a high affinity for the P. aeruginosa LecB (PA-IIL) lectin had no effect on biofilm formation or dispersal. Planktonic growth of P. aeruginosa PAO1 was unaffected by the presence of IPTG, NPG or NPF, nor was the strain able to utilize these sugars as carbon sources, suggesting that the observed effects on biofilm formation were due to the competitive inhibition of LecA-ligand binding. Similar results were also obtained for biofilms grown under dynamic flow conditions on steel coupons, suggesting that LecA contributes to P. aeruginosa biofilm architecture under different environmental conditions.     

生物膜定量分析仪对不同细菌早期生物膜形成能力的比较研究

目的通过生物膜定量分析仪来观察铜绿假单胞菌(Pseudomonas aeruginosa PAO1),变形链球菌(Streptococcus mutans UA159)以及大肠埃希菌(Escherichia coli MG1655)生物膜形成能力的不同,并以各菌株的吸光度值A600为参考,对3种菌株早期生物膜形成能力进行比较。方法通过向生物膜培养悬液中加入与细菌直径相近的磁性小珠,利用这些小珠在磁场中受到生物膜的位移约束力的原理,采用生物膜定量分析仪,定量比较3种菌株在生物膜形成上的差别。结果实验发现铜绿假单胞菌PAO1和大肠埃希菌MG1655的细菌增长速度基本相同,但铜绿假单胞菌PAO1的生物膜形成明显快于大肠埃希菌MG1655。大肠埃希菌MG1655和变形链球菌UA159的生物膜形成速度基本相同,但大肠埃希菌MG1655的细菌增长速度明显高于变形链球菌UA159。结论不同细菌有各自的生物膜形成模式。生物膜定量分析仪作为一种高效简便的检测手段,可用于生物膜早期形成的动态分析。     

Cathodic protection and microbially induced corrosion

Cathodic protection, using sacrificial anodes or impressed current, has been recognized for a long time as an effective way to prevent marine corrosion. Cathodic polarization leads to the formation of a protective calcareous layer on the surfaces. It is well documented that the attachment of bacteria to metal surfaces and subsequent biofilm formation changes some physical and chemical parameters at the interface and influences the corrosion process. The objective of this study was to determine whether there is a relationship between cathodic polarization and development of biofilms on surfaces exposed to both synthetic and natural seawater. Experiments were conducted on clean surfaces, biofilmed surfaces, in natural or synthetic seawater using bacterial monocultures and cocultures. In marine sediments, cathodically produced hydrogen encouraged growth of hydrogenase-containing sulphate-reducing bacteria while in aerated seawater biofilms competed with the magnesium and calcium deposition. Both low pH induced by bacterial metabolism and exopolymers affect the deposition process and the stability of the calcareous layer.     

Effect of W–TiO2 composite to control microbiologically influenced corrosion on galvanized steel

Microorganisms tend to colonize on solid metal/alloy surface in natural environment leading to loss of utility. Microbiologically influenced corrosion or biocorrosion usually increases the corrosion rate of steel articles due to the presence of bacteria that accelerates the anodic and/or cathodic corrosion reaction rate without any significant change in the corrosion mechanism. An attempt was made in the present study to protect hot-dip galvanized steel from such attack of biocorrosion by means of chemically modifying the zinc coating. W–TiO₂ composite was synthesized and incorporated into the zinc bath during the hot-dipping process. The surface morphology and elemental composition of the hot-dip galvanized coupons were analyzed by scanning electron microscopy and energy dispersive X-ray spectroscopy. The antifouling characteristics of the coatings were analyzed in three different solutions including distilled water, seawater, and seawater containing biofilm scrapings under immersed conditions. Apart from electrochemical studies, the biocidal effect of the composite was evaluated by analyzing the extent of bacterial growth due to the presence and absence of the composite based on the analysis of total extracellular polymeric substance and total biomass using microtiter plate assay. The biofilm-forming bacteria formed on the surface of the coatings was cultured on Zobell Marine Agar plates and studied. The composite was found to be effective in controlling the growth of bacteria and formation of biofilm thereafter.     

Enhanced biofilm formation and 3-chlorobenzoate degrading activity by the bacterial consortium of Burkholderia sp. NK8 and Pseudomonas aeruginosa PAO1

Aims:  To characterize biofilm formation of a chlorobenzoates (CBs) degrading bacterium, Burkholderia sp. NK8, with another bacterial species, and the biodegradation activity against CBs in the mixed-species biofilm.
Methods and Results:  Burkholderia sp. NK8 was solely or co-cultured with each of five other representative bacteria in microtitre dishes. Biofilm formation involving the strain NK8 was synergistically promoted by co-culturing with only Pseudomonas aeruginosa PAO1. Epifluorescent microscopy revealed that cells of the bacterial strain NK8 were viable and distributed randomly in the mixed-species biofilms. Enumeration of the attached cells on the surface of wells revealed that cells of the strain NK8 increased approx. 10-fold by the co-culture with the strain PAO1 compared to those by monoculture of the strain NK8, and the degradation activity of 3-chlorobenzoate by the dual-species biofilms was more promoted than that by the strain NK8-monocultured biofilms.
Conclusions:  Enhanced biofilm formation of Burkholderia sp. NK8 by the bacterial consortium occurred, but is determined by the partner bacterial species. The mixed-species biofilms have the advantage to degrade CBs on a solid surface.
Significance and Impact of the Study:  This study provides a significance of bacterial consortia on the biofilm formation and the degradation activity of Burkholderia sp. NK8, which contribute for complete degradation of chlorinated aromatics.     

Effect of chlorhexidine and benzalkonium chloride on bacterial biofilm formation

AIM: To study the effect of antiseptics on bacterial biofilm formation. METHODS AND RESULTS: Biofilm formation and planktonic growth were tested in microtiter plates in the presence of antiseptics. For Escherichia coli G1473 in the presence of chlorhexidine or benzalkonium chloride, for Klebsiella pneumoniae CF504 in the presence of chlorhexidine and for Pseudomonas aeruginosa PAO1 in the presence of benzalkonium chloride, biofilm development and planktonic growth were affected at the same concentrations of antiseptics. For PAO1 in the presence of chlorhexidine and CF504 in the presence of benzalkonium chloride, planktonic growth was significantly inhibited by a fourfold lower antiseptic concentration than biofilm development. For Staphylococcus epidermidis CIP53124 in the presence of antiseptics at the minimal inhibitory concentration (MIC), a total inhibition of biofilm formation was observed. For Staph. epidermidis exposed to chlorhexidine at 1/2, 1/4 and 1/8 MIC, or to benzalkonium chloride at 1/8, 1/16 or 1/32 MIC, biofilm formation was increased from 11.4% to 22.5% without any significant effect onto planktonic growth. CONCLUSIONS: Chlorhexidine and benzalkonium chloride inhibited biofilm formation of different bacterial species but were able to induce biofilm development for the Staph. epidermidis CIP53124 strain at sub-MICs. SIGNIFICANCE AND IMPACT OF THE STUDY: Sublethal exposure to cationic antiseptics may contribute to the persistence of staphylococci through biofilm induction.     

Effect of honey on Streptococcus mutans growth and biofilm formation

Because of the tradition of using honey as an antimicrobial medicament, we investigated the effect of natural honey (NH) on Streptococcus mutans growth, viability, and biofilm formation compared to that of an artificial honey (AH). AH contained the sugars at the concentrations reported for NH. NH and AH concentrations were obtained by serial dilution with tryptic soy broth (TSB). Several concentrations of NH and AH were tested for inhibition of bacterial growth, viability, and biofilm formation after inoculation with S. mutans UA159 in 96-well microtiter plates to obtain absorbance and CFU values. Overall, NH supported significantly less (P < 0.05) bacterial growth than AH at 25 and 12.5% concentrations. At 50 and 25% concentrations, both honey groups provided significantly less bacterial growth and biofilm formation than the TSB control. For bacterial viability, the results for all honey concentrations except 50% NH were not significantly different from those for the TSB control. NH was able to decrease the maximum velocity of S. mutans growth compared to AH. In summary, NH demonstrated more inhibition of bacterial growth, viability, and biofilm formation than AH. This study highlights the potential antibacterial properties of NH and could suggest that the antimicrobial mechanism of NH is not solely due to its high sugar content.     

The Effect of a Cationic Porphyrin on Pseudomonas aeruginosa Biofilms

Current studies have indicated the utility of photodynamic therapy using porphyrins in the treatment of bacterial infections. Photoactivation of porphyrins results in the production of singlet oxygen (¹O₂) that damages biomolecules associated with cells and biofilms, e.g., proteins, polysaccharides, and DNA. The effect of a cationic porphryin on P. aeruginosa PAO1 biofilms was assessed by exposing static biofilms to 5,10,15,20-tetrakis(1-methyl-pyridino)-21H,23H-porphine, tetra-p-tosylate salt (TMP) followed by irradiation. Biofilms were visualized using confocal laser scanning microscopy (CLSM) and cell viability determined using the LIVE/DEAD BacLight viability assay and standard plate counts. At a concentration of 100 μM TMP, there was substantial killing of P. aeruginosa PAO1 wild-type and pqsA mutant biofilms with little disruption of the biofilm matrix or structure. Exposure to 225 μM TMP resulted in almost complete killing as well as the detachment of wild-type PAO1 biofilms. In contrast, pqsA mutant biofilms that contain less extracellular DNA remained intact. Standard plate counts of cells recovered from attached biofilms revealed a 4.1-log₁₀ and a 3.9-log₁₀ reduction in viable cells of wild-type PAO1 and pqsA mutant strains, respectively. Our results suggest that the action of photoactivated TMP on P. aeruginosa biofilms is two-fold: direct killing of individual cells within biofilms and detachment of the biofilm from the substratum. There was no evidence of porphyrin toxicity in the absence of light; however, biofilms pretreated with TMP without photoactivation were substantially more sensitive to tobramycin than untreated biofilms.     

Pseudomonas aeruginosa and their small diffusible extracellular molecules inhibit Aspergillus fumigatus biofilm formation

Aspergillus fumigatus is often isolated from the lungs of cystic fibrosis (CF) patients, but unlike in severely immunocompromised individuals, the mortality rates are low. This suggests that competition from bacteria within the CF lung may be inhibitory. The purpose of this study was to investigate how Pseudomonas aeruginosa influences A. fumigatus conidial germination and biofilm formation. Aspergillus fumigatus biofilm formation was inhibited by direct contact with P. aeruginosa, but had no effect on preformed biofilm. A secreted heat-stable soluble factor was also shown to exhibit biofilm inhibition. Coculture of P. aeruginosa quorum-sensing mutants (PAO1:ΔLasI, PAO1:ΔLasR) did not significantly inhibit A. fumigatus biofilms (52.6-58.8%) to the same extent as that of the PA01 wild type (22.9-30.1%), both by direct and by indirect interaction (P<0.001). Planktonic and sessile inhibition assays with a series of short carbon chain molecules (decanol, decanoic acid and dodecanol) demonstrated that these molecules could both inhibit and disrupt biofilms in a concentration-dependent manner. Overall, this suggests that small diffusible and heat-stable molecules may be responsible for the competitive inhibition of filamentous fungal growth in polymicrobial environments such as the CF lung.     

The influence of flow cell geometry related shear stresses on the distribution,structure and susceptibility of Pseudomonas aeruginosa 01 biofilms

The effects of non-uniform hydrodynamic conditions resulting from flow cell geometry (square and rectangular cross-section) on Pseudomonas aeruginosa 01 (PAO1) biofilm formation, location, and structure were investigated for nominally similar flow conditions using a combination of confocal scanning laser microscope (CSLM) and computational fluid dynamics (CFD). The thickness and surface coverage of PAO1 biofilms were observed to vary depending on the location in the flow cell and thus also the local wall shear stress. The biofilm structure in a 5:1 (width to height) aspect ratio rectangular flow cell was observed to consist mainly of a layer of bacterial cells with thicker biofilm formation observed in the flow cell corners. For square cross-section (1:1 aspect ratio) flow cells, generally thicker and more uniform surface coverage biofilms were observed. Mushroom shaped structures with hollow centers and wall breaks, indicative of ‘seeding’ dispersal structures, were found exclusively in the square cross-section tubes. Exposure of PAO1 biofilms grown in the flow cells to gentamicin revealed a difference in susceptibility. Biofilms grown in the rectangular flow cell overall exhibited a greater susceptibility to gentamicin compared to those grown in square flow cells. However, even within a given flow cell, differences in susceptibility were observed depending on location. This study demonstrates that the spanwise shear stress distribution within the flow cells has an important impact on the location of colonization and structure of the resultant biofilm. These differences in biofilm structure have a significant impact on the susceptibility of the biofilms grown within flow channels. The impact of flow modification due to flow cell geometry should be considered when designing flow cells for laboratory investigation of bacterial biofilms.     

Enzymatic removal and disinfection of bacterial biofilms.

Model biofilms of Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas fluorescens, and Pseudomonas aeruginosa were made on steel and polypropylene substrata. Plaque-resembling biofilms of Streptococcus mutans, Actinomyces viscosus, and Fusobacterium nucleatum were made on saliva-coated hydroxyapatite. The activity of enzymes against bacterial cells in biofilm was measured by fluorescence microscopy and an indirect conductance test in which evolution of carbon dioxide was measured. Glucose oxidase combined with lactoperoxidase was bactericidal against biofilm bacteria but did not remove the biofilm from the substrata. A complex mixture of polysaccharide-hydrolyzing enzymes was able to remove bacterial biofilm from steel and polypropylene substrata but did not have a significant bactericidal activity. Combining oxidoreductases with polysaccharide-hydrolyzing enzymes resulted in bactericidal activity as well as removal of the biofilm.     

Direct cathodic electron uptake coupled to sulfate reduction by Desulfovibrio ferrophilus IS5 biofilms

Direct electron uptake is emerging as a key process for electron transfer in anaerobic microbial communities, both between species and from extracellular sources, such as zero-valent iron (Fe⁰) or cathodic surfaces. In this study, we investigated cathodic electron uptake by Fe⁰-corroding Desulfovibrio ferrophilus IS5 and showed that electron uptake is dependent on direct cell contact via a biofilm on the cathode surface rather than through secreted intermediates. Induction of cathodic electron uptake by lactate-starved D. ferrophilus IS5 cells resulted in the expression of all components necessary for electron uptake; however, protein synthesis was required for full biofilm formation. Notably, proteinase K treatment uncoupled electron uptake from biofilm formation, likely through proteolytic degradation of proteinaceous components of the electron uptake machinery. We also showed that cathodic electron uptake is dependent on SO₄²⁻ reduction. The insensitivity of Fe⁰ corrosion to proteinase K treatment suggests that electron uptake from a cathode might involve different mechanism(s) than those involved in Fe⁰ corrosion.     

Monitoring of microbial adhesion and biofilm growth using electrochemical impedancemetry

Electrochemical impedance spectroscopy was tested to monitor the cell attachment and the biofilm proliferation in order to identify characteristic events induced on the metal surface by Gram-negative (Pseudomonas aeruginosa PAO1) and Gram-positive (Bacillus subtilis) bacteria strains. Electrochemical impedance spectra of AISI 304 electrodes during cell attachment and initial biofilm growth for both strains were obtained. It can be observed that the resistance increases gradually with the culture time and decreases with the biofilm detachment. So, the applicability of electric cell-substrate impedance sensing (ECIS) for studying the attachment and spreading of cells on a metal surface has been demonstrated. The biofilm formation was also characterized by the use of scanning electron microscopy and confocal laser scanning microscopy and COMSTAT image analysis. The electrochemical results roughly agree with the microscope image observations. The ECIS technique used in this study was used for continuous real-time monitoring of the initial bacterial adhesion and the biofilm growth. It provides a simple and non-expensive electrochemical method for in vitro assessment of the presence of biofilms on metal surfaces.