Optimization of fed-batch fermentation for xylitol production by Candida tropicalis

Xylitol, a functional sweetener, was produced from xylose by biological conversion using Candida tropicalis ATCC 13803. Based on a two-substrate fermentation using glucose for cell growth and xylose for xylitol production, fed-batch fermentations were undertaken to increase the final xylitol concentration. The effects of xylose and xylitol on xylitol production rate were studied to determine the optimum concentrations for fed-batch fermentation. Xylose concentration in the medium (100 g l⁻¹) and less than 200 g l⁻¹ total xylose plus xylitol concentration were determined as optimum for maximum xylitol production rate and xylitol yield. Increasing the concentrations of xylose and xylitol decreased the rate and yield of xylitol production and the specific cell growth rate, probably because of an increase in osmotic stress that would interfere with xylose transport, xylitol flux to secretion to cell metabolism. The feeding rate of xylose solution during the fed-batch mode of operation was determined by using the mass balance equations and kinetic parameters involved in the equations in order to increase final xylitol concentration without affecting xylitol and productivity. The optimized fed-batch fermentation resulted in 187 g l⁻¹ xylitol concentration, 0.75 g xylitol g xylose⁻¹ xylitol yield and 3.9 g xylitol l⁻¹ h⁻¹ volumetric productivity. Journal of Industrial Microbiology & Biotechnology (2002) 29, 16–19 doi:10.1038/sj.jim.7000257 Received 15 October 2001/ Accepted in revised form 30 March 2002     

Production of xylitol from concentrated wood hydrolysates by Debaryomyces hansenii: Effect of the initial cell concentration

Summary Eucalyptus globulus wood hydrolysates were concentrated by vacuum evaporation to increase their xylose contents, treated with activated charcoal, supplemented with nutrients and used as culture media for xylitol production by Debaryomyces hansenii NRRL Y-7426. The susceptibility of hydrolysates to fermentation was strongly dependent on the initial cell concentration: media containing 58–78 g xylose/l were hardly consumed in batch experiments starting with 16 g cells/l, whereas 39–41 g xylitol/l were achieved in fermentations carried out with similar concentration of the carbon source and initial cell concentrations of 50–80 g/l).     

Fermentation of <Emphasis Type="SmallCaps">d</Emphasis>-glucose and <Emphasis Type="SmallCaps">d</Emphasis>-xylose mixtures by <Emphasis Type="Italic">Candida tropicalis</Emphasis> NBRC 0618 for xylitol production

The fermentation of d-glucose and d-xylose mixtures by the yeast Candida tropicalis NBRC 0618 has been studied under the most favourable operation conditions for the culture, determining the most adequate initial proportion in these sugars for xylitol production. In all the experiments a synthetic culture medium was used, with an initial total substrate concentration of 25 g L⁻¹, a constant pH of 5.0 and a temperature of 30 °C. From the experimental results, it was deduced that the highest values of specific rates of production and of overall yield in xylitol were achieved for the mixtures with the highest percentage of d-xylose, specifically in the culture with the initial d-glucose and d-xylose concentrations of 1 and 24 g L⁻¹, respectively, with an overall xylitol yield of 0.28 g g⁻¹. In addition, the specific rates of xylitol production declined over the time course of the culture and the formation of this bioproduct was favoured by the presence of small quantities of d-glucose. The sum of the overall yield values in xylitol and ethanol for all the experiments ranged from 0.26 to 0.56 g bioproduct/g total substrate.     

Analysis and optimization of a two-substrate fermentation for xylitol production using Candida tropicalis

Xylitol, a functional sweetener, was produced from xylose using Candida tropicalisATCC 13803. A two-substrate fermentation was designed in order to increase xylitol yield and volumetric productivity. Glucose was used initially for cell growth followed by conversion of xylose to xylitol without cell growth and by-product formation after complete depletion of glucose. High glucose concentrations increased volumetric productivity by reducing conversion time due to high cell mass, but also led to production of ethanol, which, in turn, inhibited cell growth and xylitol production. Computer simulation was undertaken to optimize an initial glucose concentration using kinetic equations describing rates of cell growth and xylose bioconversion as a function of ethanol concentration. Kinetic constants involved in the equations were estimated from the experimental results. Glucose at 32 g L⁻¹ was estimated to be an optimum initial glucose concentration with a final xylose concentration of 86 g L⁻¹ and a volumetric productivity of 5.15 g-xylitol L⁻¹ h⁻¹. The two-substrate fermentation was performed under optimum conditions to verify the computer simulation results. The experimental results were in good agreement with the predicted values of simulation with a xylitol yield of 0.81 g-xylitol g-xylose⁻¹ and a volumetric productivity of 5.06 g-xylitol L⁻¹ h⁻¹. Received 16 June 1998/ Accepted in revised form 28 February 1999     

Optimization of the pretreatment of rice straw hemicellulosic hydrolyzates for microbial production of xylitol

Hemicellulosic hydrolyzate obtained from rice straw was evaluated to determine if it was a suitable fementation medium for the production of xylitol byCandida mogii ATCC 18364. To obtain xylose selectively from rice straw, it is important to establish rapid hydrolysis conditions that yield xylose-rich substrates. The results of hydrolysis experiments indicated that the optimal reaction conditions for the recovery of xylose from rice straw hemicellulose were obtained using a sulfuric acid concentration of 1.5%, a reaction temperature of 130°C, a reaction time of 20 min and a solid to liquid ratio of 1∶10. Because the fermentation of concentrated acid hydrolyzates can be inhibited by compounds present in the raw material or produced during the hydrolysis process, various methods were tested to determine if they could detoxify the hydrolyzates and thus improve xylitol production. The greatest xylitol yield (0.53 g/g) and volumetric productivity (0.38 g/L·h) were obtained when an overlimed hydrolyzate was treated with activated charcoal.     

Increase of xylitol production rate by controlling redox potential in Candida parapsilosis

The effect of redox potential on xylitol production by Candida parapsilosis was investigated. The redox potential was found to be useful for monitoring the dissolved oxygen (DO) level in culture media, especially when the DO level was low. An increase in the agitation speed in a 5 L fermentor resulted in an increased culture redox potential as well as enhanced cell growth. Production of xylitol was maximized at a redox potential of 100 mV. As the initial cell concentration increased from 8 g/L to 30 g/L, the volumetric productivity of xylitol increased from 1.38 g/L. h to 4.62 g/L. h. A two-stage xylitol production strategy was devised, with stage 1 involving rapid production of cells under well-aerated conditions, and stage 2 involving cultivation with reduced aeration such that the culture redox potential was 100 mV. Using this technique, a final xylitol concentration of 180 g/L was obtained from a culture medium totally containing 254.5 g/L xylose in a 3,000 L pilot scale fermentor after 77 h fermentation. The volumetric productivity of xylitol during the fermentation was 2.34 g/L. h.     

Dimorphic behaviour of Debaryomyces hansenii grown on barley bran acid hydrolyzates

Debaryomyces hansenii exhibited yeast-to-mycelium dimorphism in the continuous fermentation of xylose-containing media made from acid hydrolyzates of barley bran. The lower the dilution rate, the earlier the yeast-to-mycelia transition occurred. Within a selected range of dilution rates, the yeast morphology was reversibly affected by the dissolved O₂: low aeration caused the transition from oval cells to hyphae, and further increases in dissolved O₂ concentration resulted in recuperation of the oval shape. Under the operational conditions assayed, xylitol was the major fermentation product when the yeast was in both morphological forms, whereas the production of ethanol was increased when the yeast grew under hyphal morphology and oxygen limitation. The lower xylose consumption corresponded to the yeast-to-mycelia transition. In media made with commercial sugars (xylose or glucose), the yeast-to-mycelia transition was induced by adding selected amounts of acid-soluble lignin.     

Increased xylitol production rate during long-term cell recycle fermentation of Candida tropicalis

Long-term cell recycle fermentations of Candida tropicalis were performed over 14 rounds of fermentation. The average xylitol concentrations, fermentation times, volumetric productivities and product yields for 14 rounds were 105 g l^–1, 333 h, 4.4 g l^–1 h^–1 and 78%, respectively, in complex medium; and 110 g l^–1, 284 h, 5.4 g l^–1 h^–1 and 81%, respectively, in a chemically defined medium. These productivities were 1.7 and 2.4 times those with batch fermentation in the complex and chemically defined media, respectively. The xylitol yield from xylose with cell recycle fermentation using the chemically defined medium was 81% (w/w), which was 7% greater than the xylitol yield with batch fermentation (74%); both modes of fermentation gave the same yield using the complex medium. These results suggest that the chemically defined medium is more suitable for production of xylitol than complex medium.     

Influence of the toxic compounds present in brewer's spent grain hemicellulosic hydrolysate on xylose-to-xylitol bioconversion by Candida guilliermondii

Fermentation media containing different concentrations of toxic compounds were prepared from brewer's spent grain (BSG) hemicellulosic hydrolysate, and used for xylose-to-xylitol bioconversion by Candida guilliermondii. Such fermentation media were composed of the hydrolysate in the following ways: raw (RH); concentrated four-fold (CH); concentrated and treated with activated charcoal (TCH); raw supplemented with sugars until a concentration four-fold higher (SRH); concentrated and subsequently diluted but supplemented with sugars until a concentration four-fold higher (SDCH). All media presented an initial xylose concentration of 85 g/l, except RH, which contained 23 g/l xylose. Fermentation results revealed that the sugars supplementation to raw hydrolysate favored the xylitol production. Nevertheless, xylitol production from CH was negatively affected due to the high concentration of toxic compounds present in the medium. The hydrolysate treatment with activated charcoal partially removed the toxic compounds, and the xylitol production was higher than in CH, but not so efficient as in SRH. It was thus concluded that to obtain an efficient xylose-to-xylitol bioconversion from BSG hydrolysate, the sugars concentration must be increased, but the toxic compounds concentration must be reduced to the same level present in the raw hydrolysate.     

d-Xylulose Fermentation to Ethanol by Saccharomyces cerevisiae

We used commercial bakers' yeast (Saccharomyces cerevisiae) to study the conversion of d-xylulose to ethanol in the presence of d-xylose. The rate of ethanol production increased with an increase in yeast cell density. The optimal temperature for d-xylulose fermentation was 35 degrees C, and the optimal pH range was 4 to 6. The fermentation of d-xylulose by yeast resulted in the production of ethanol as the major product; small amounts of xylitol and glycerol were also produced. The production of xylitol was influenced by pH as well as temperature. High pH values and low temperatures enhanced xylitol production. The rate of d-xylulose fermentation decreased when the production of ethanol yielded concentrations of 4% or more. The slow conversion rate of d-xylulose to ethanol was increased by increasing the yeast cell density. The overall production of ethanol from d-xylulose by yeast cells under optimal conditions was 90% of the theoretical yield.     

Xylitol does not inhibit xylose fermentation by engineered <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> expressing <Emphasis Type="Italic">xylA</Emphasis> as severely as it inhibits xylose isomerase reaction in vitro

Efficient fermentation of xylose, which is abundant in hydrolysates of lignocellulosic biomass, is essential for producing cellulosic biofuels economically. While heterologous expression of xylose isomerase in Saccharomyces cerevisiae has been proposed as a strategy to engineer this yeast for xylose fermentation, only a few xylose isomerase genes from fungi and bacteria have been functionally expressed in S. cerevisiae. We cloned two bacterial xylose isomerase genes from anaerobic bacteria (Bacteroides stercoris HJ-15 and Bifidobacterium longum MG1) and introduced them into S. cerevisiae. While the transformant with xylA from B. longum could not assimilate xylose, the transformant with xylA from B. stercoris was able to grow on xylose. This result suggests that the xylose isomerase (BsXI) from B. stercoris is functionally expressed in S. cerevisiae. The engineered S. cerevisiae strain with BsXI consumed xylose and produced ethanol with a good yield (0.31 g/g) under anaerobic conditions. Interestingly, significant amounts of xylitol (0.23 g xylitol/g xylose) were still accumulated during xylose fermentation even though the introduced BsXI might not cause redox imbalance. We investigated the potential inhibitory effects of the accumulated xylitol on xylose fermentation. Although xylitol inhibited in vitro BsXI activity significantly (K _I = 5.1 ± 1.15 mM), only small decreases (less than 10%) in xylose consumption and ethanol production rates were observed when xylitol was added into the fermentation medium. These results suggest that xylitol accumulation does not inhibit xylose fermentation by engineered S. cerevisiae expressing xylA as severely as it inhibits the xylose isomerase reaction in vitro.     

Yeast Immobilization in LentiKats®: A New Strategy for Xylitol Bioproduction from Sugarcane Bagasse

Summary A new PVA-hydrogel matrix for yeast cell immobilization for xylitol bioproduction from sugarcane bagasse was studied. Five repeated-batch fermentation runs were carried out in medium based on sugarcane bagasse hemicellulosic hydrolysate with reuse of the entrapped biocatalyst. The system performance as well as the metabolic behaviour of cells entrapped into the matrix were evaluated. The biocatalyst remained stable and exhibited a similar fermentative profile in all the successive batches, demonstrating the viability of the system. At the end of the run, an average xylitol production was observed of 35.1 g l⁻¹ and average xylitol yield and productivity of 0.58 g g⁻¹ and 0.49 g l⁻¹ h⁻¹, respectively.     

Downstream processing for xylitol recovery from fermented sugar cane bagasse hydrolysate using aluminium polychloride

Xylitol, a sweetener comparable to sucrose, is anticariogenic and can be consumed by diabetics. This sugar has been employed successfully in many foods and pharmaceutical products. The discovery of microorganisms capable of converting xylose present in lignocellulosic biomass into xylitol offers the opportunity of producing this poliol in a simple way. Xylitol production by biotechnological means using sugar cane bagasse is under study in our laboratories, and fermentation parameters have already been established. However, the downstream processing for xylitol recovery is still a bottleneck on which there is only a few data available in the literature. The present study deals with xylitol recovery from fermented sugar cane bagasse hydrolysate using 5.2 g/l of aluminium polychloride associated with activated charcoal. The experiments were performed at pH 9, 50 degrees C for 50 min. The results showed that aluminium polychloride and activated charcoal promoted a 93.5% reduction in phenolic compounds and a 9.7% loss of xylitol from the fermented medium, which became more discoloured, facilitating the xylitol separation.     

A model of xylitol production by the yeast Candida mogii

Production of xylitol from xylose in batch fermentations of Candida mogii ATCC 18364 is discussed in the presence of glucose as the cosubstrate. Various initial ratios of glucose and xylose concentrations are assessed for their impact on yield and rate of production of xylitol. Supplementation with glucose at the beginning of the fermentation increased the specific growth rate, biomass yield and volumetric productivity of xylitol compared with fermentation that used xylose as the sole carbon source. A mathematical model is developed for eventual use in predicting the product formation rate and yield. The model parameters were estimated from experimental observations, using a genetic algorithm. Batch fermentations, which were carried out with xylose alone and a mixture of xylose and glucose, were used to validate the model. The model fitted well with the experimental data of cell growth, substrate consumption and xylitol production.     

Increase of xylitol yield by feeding xylose and glucose in Candida tropicalis

Candida tropicalis, a strain isolated from the sludge of a factory manufacturing xylose, produced a high xylitol concentration of 131 g/l from 150 g/l xylose at 45 h in a flask. Above 150 g/l xylose, however, volumetric xylitol production rates decreased because of a lag period in cell growth. In fed-batch culture, the volumetric production rate and xylitol yield from xylose varied substantially with the controlled xylose concentration and were maximum at a controlled xylose concentration of 60 g/l. To increase the xylitol yield from xylose, feeding experiments using different ratios of xylose and glucose were carried out in a fermentor. The maximum xylitol yield from 300 g/l xylose was 91% at a glucose/xylose feeding ratio of 15%, while the maximum volumetric production rate of xylitol was 3.98 g l⁻¹ h⁻¹ at a glucose/xylose feeding ratio of 20%. Xylitol production was found to decrease markedly as its concentration rose above 250 g/l. In order to accumulate xylitol to 250 g/l, 270 g/l xylose was added in total, at a glucose/xylose feeding ratio of 15%. Under these conditions, a final xylitol production of 251 g/l, which corresponded to a yield of 93%, was obtained from 270 g/l xylose in 55 h. Received: 20 April 1998 / Received revision: 29 May 1998 / Accepted: 19 June 1998     

Fermentation of acid hydrolysates from olive-tree pruning debris by Pachysolen tannophilus

The influence of the type and concentration of acid in the hydrolysis process and its effect on the subsequent fermentation by Pachysolen tannophilus (ATCC 32691) to produce ethanol and xylitol was studied. The hydrolysis experiments were performed using hydrochloric, sulphuric and trifluoroacetic acids in concentrations ranging from 0.1 to 1.0 N, a temperature of 90 degrees C, and a time of 240 min. The fermentation experiments were conducted on a laboratory scale in a batch-culture reactor at pH 4.5 and 30 degrees C. The hydrolysis with the highest acid concentration produced the complete solubilization of hemicellulose to monosaccharides. The highest values for the specific rate of ethanol production were registered in cultures hydrolyzed with trifluoroacetic acid, and values were found to decrease as the acid concentration increased. The highest values of overall ethanol yields ( [Formula: see text] = 0.37 kg kg(-1)) were also found in the fermentation of the hydrolysates of trifluoroacetic acid.     

Fermentation behavior of osmophilic yeast Candida tropicalis isolated from the nectar of Hibiscus rosa sinensis flowers for xylitol production

Eighteen yeast species belonging to seven genera were isolated from ten samples of nectar from Hibiscus rosa sinensis and investigated for xylitol production using d-xylose as sole carbon source. Amongst these isolates, no. 10 was selected as the best xylitol producer and identified as Candida tropicalis on the basis of morphological, biochemical and 26S rDNA sequencing. C. tropicalis produced 12.11 gl⁻¹ of xylitol in presence of 50 gl⁻¹ of xylose in 72 h at pH 5, 30°C and 200 rpm. The strain of C. tropicalis obtained through xylose enrichment technique has resulted in a yield of 0.5 gg⁻¹ with a xylitol volumetric productivity of 1.07 gl⁻¹h⁻¹ in the presence of 300 gl⁻¹ of xylose through batch fermentation. This organism has been reported for the first time from Hibiscus rosa sinensis flowers. Realizing, the importance of this high valued compound, as a sugar substitute, xylose enrichment technique was developed in order to utilize even higher concentrations of xylose as substrate for maximum xylitol production.     

Production of xylitol in cell recycle fermentations of Candida tropicalis

Xylitol was produced a in two-substrate, batch fermentation with cell recycling of Candida tropicalis ATCC 13803. A series of cell-recycle experiments showed that the feeding of xylose, glucose and yeast extract in the xylitol production phase was most effective in enhancing xylitol productivity. The optimized cell recycle fermentation resulted in 0.82 g xylitol/g xylose yield, 4.94 g xylitol l^–1 h^–1 productivity, and final xylitol concentration of 189 g l^–1. These results were 1.3 times higher in volumetric xylitol productivity and 2.2 times higher in final product concentration compared with the corresponding values of the optimized two-substrate batch culture.     

Variables that affect xylitol production from sugarcane bagasse hydrolysate in a zeolite fluidized bed reactor

The operational conditions for xylitol production by fermentation of sugarcane bagasse hydrolysate in a fluidized bed reactor with cells immobilized on zeolite were evaluated. Fermentations were carried out under different conditions of air flowrate (0.0125-0.0375 vvm), zeolite mass (100-200 g), initial pH (4-6), and xylose concentration (40-60 g/L), according to a 2(4) full factorial design. The air flowrate increase resulted in a metabolic deviation from product to biomass formation. On the other hand, the pH increase favored both the xylitol yield (Y(P/S)) and volumetric productivity (Q(P)), and the xylose concentration increase positively influenced the xylitol concentration. The best operational conditions evaluated were based on the use of an air flowrate of 0.0125 vvm, 100 g of zeolite, pH 6, and xylose concentration of 60 g/L. Under these conditions, 38.5 g/L of xylitol were obtained, with a Y(P/S) of 0.72 g/g, Q(P) of 0.32 g/L.h, and cell retention of 25.9%.     

Coupling two sizes of CSTR-type bioreactors for sequential lactic acid and xylitol production from hemicellulosic hydrolysates of vineshoot trimmings

This study develops a system for the efficient valorisation of hemicellulosic hydrolysates of vineshoot trimmings. By connecting two reactors of 2L and 10L, operational conditions were set up for the sequential production of lactic acid and xylitol in continuous fermentation, considering the dependence of the main metabolites and fermentation parameters on the dilution rate. In the first bioreactor, Lactobacillus rhamnosus consumed all the glucose to produce lactic acid at 31.5°C, with 150rpm and 1L of working volume as the optimal conditions. The residual sugars were employed for the xylose to xylitol bioconversion by Debaryomyces hansenii in the second bioreactor at 30°C, 250rpm and an air-flow rate of 2Lmin(-1). Several steady states were reached at flow rates (F) in the range of 0.54-5.33mLmin(-1), leading to dilution rates (D) ranging from 0.032 to 0.320h(-1) in Bioreactor 1 and from 0.006 to 0.064h(-1) in Bioreactor 2. The maximum volumetric lactic acid productivity (Q(P LA)=2.908gL(-1)h(-1)) was achieved under D=0.266h(-1) (F=4.44mLmin(-1)); meanwhile, the maximum production of xylitol (5.1gL(-1)), volumetric xylitol productivity (Q(P xylitol)=0.218gL(-1)h(-1)), volumetric rate of xylose consumption (Q(S xylose)=0.398gL(-1)h(-1)) and product yield (0.55gg(-1)) were achieved at an intermediate dilution rate of 0.043h(-1) (F=3.55mLmin(-1)). Under these conditions, ethanol, which was the main by-product of the fermentation, was produced in higher amounts (1.9gL(-1)). Finally, lactic acid and xylitol were effectively recovered by conventional procedures.