Use of a 49-peptide library for a qualitative and quantitative determination of pseudomonal serralysin specificity

The Pseudomonas aeruginosa serralysin (E.C. 3.4.24.40.), which is a zinc-dependent metalloprotease from the metzincin superfamily, has quite a broad specificity, which has not yet been clearly identified. We have studied it with an original approach, using a 49-peptide library of the type Z–AXXA (amide) (X=A, L, V, F, S, R, E). The library was analyzed by LC-MS before and after enzymatic hydrolysis. A great number of hydrolyzed peptides were screened and the preferential hydrolysis was the X–X peptide bond, even if in some cases, A–X and X–A bond could be hydrolyzed. No amino acids with a ionized side chain could be found in the P₁′ position. The results obtained suggest that the specificity in the P_n′ position, where an hydrophobic residue was preferentially found, seems more selective that in the P_n position. The P₁ position was not very specific, but, on a quantitative point of view, the enzymatic activity was particularly increased when R, F or A were in this position. The results allow us to define the P₁′ and P₁ residues for an optimal substrate of pseudomonal serralysin and usable for the design and the synthesis of a specific inhibitor.     

Surprisingly high stability of barley lipid transfer protein, LTP1, towards denaturant, heat and proteases

Tripeptidyl peptidase-I (TPP-I) is a lysosomal peptidase which cleaves tripeptides from the N-terminus of peptides. The function of the enzyme is unclear but its importance is demonstrated by the fact that mutations in TPP-I are responsible for late infantile neuronal ceroid lipofuscinosis, a lethal lysosomal storage disease. As a step towards identifying its natural substrates, we have used a series of synthetic peptides, based on angiotensin-II, to explore the effects of peptide chain length and the effects of amino acid substitutions at the P₁ and P₁′ positions on the rate of catalysis. With the exception of angiotensin-(1–8) (angiotensin-II), which is a relatively poor substrate for TPP-I, the rate of catalysis increases with increasing chain length. K_cat/K_m values increase 50-fold between angiotensin-(1–5) and angiotensin-(1–14). TPP-I shows little specificity for the nature of the amino acids in the P₁ and P₁′ positions, K_cat/K_m values varying only 5-fold for a range of substitutions. However, Pro or Lys in the P₁ position and Pro in the P₁′ positions are incompatible with TPP-I activity. These observations suggest that TPP-I is a non-specific, but essential, peptidase involved in the latter stages of lysosomal protein degradation.     

KMI-008, a novel beta-secretase inhibitor containing a hydroxymethylcarbonyl isostere as a transition-state mimic: design and synthesis of substrate-based octapeptides

A novel class of substrate-based β-secretase (BACE1) inhibitors containing a hydroxymethylcarbonyl (HMC) isostere was designed and synthesized. Phenylnorstatine [(2R,3S)-3-amino-2-hydroxy-4-phenylbutyric acid; Pns] was an effective transition-state mimic at the P₁ position. Structure–activity relationships (SARs) of the P₃–P₃′ positions of BACE1 inhibitors were studied.     

Design and synthesis of statine-containing BACE inhibitors

Utilizing structure-based techniques and solid-phase synthesis, statine-based tetrapeptide BACE inhibitors were designed and synthesized using a heptapeptide BACE transition-state mimetic, 1, as the starting point. Structure–activity relationship studies at the P₃, P₂, and P₂′ positions as well as the N-terminal capping group on scaffold 5 led to the discovery of potent inhibitors 27, 32, and 34 (IC₅₀ <100 nM). In addition, computational analysis and the X-ray structure of BACE–inhibitor 38 are discussed.     

Synthesis and activity of N-acyl azacyclic urea HIV-1 protease inhibitors with high potency against multiple drug resistant viral strains

As part of our efforts to identify potent HIV-1 protease inhibitors that are active against resistant viral strains, structural modification of the azacyclic urea (I) was undertaken by incorporating acyl groups as P₁′ ligands. The extensive SAR study has yielded a series of N-acyl azacyclic ureas (II), which are highly potent against both wild-type and multiple PI-resistant viral strains.     

Methylene bridged binuclear bis(imino)pyridyl iron(II) complexes and their use as catalysts together with Al(i-Bu)3 for ethylene polymerization

Three novel methylene bridged binuclear iron(II) complexes: (R,R′ = i-C₃H₇ (6); R = i-C₃H₇, R′ = CH₃ (7); R,R′ = CH₃ (8))} have been synthesized. Activated by Al(i-Bu)₃, complex 6 shows very poor activity for the polymerization of ethylene at one bar ethylene pressure, whereas, 7 and 8 exhibit much higher activity than mononuclear iron catalysts {[ArNC(Me)C₅H₃N(Me)CNAr′]FeCl₂ (Ar,Ar′ = 2,6-C₆H₃-i-Pr (9); Ar = 2,6-C₆H₃-i-Pr₂, Ar′ = 2,6-C₆H₃–Me₂ (10); Ar,Ar′ = 2,6-C₆H₃–Me₂ (11))}. The molecular weight (M_w) of PE produced by 7 and 8 are in the range 13.2–46.0 × 10⁴ and much higher than those produced by mononuclear iron catalysts 9 and 10. GPC results demonstrate that 7 and 8 yield PE with a broad/bimodal molecular weight distribution (MWD). In contrast, 9 and 10 yield PE with relatively narrow and unimodal MWD (4.26 and 3.55). Elevating the temperature and Al/Fe molar ratio will narrow the MWD of PE.     

Synthesis and reactivity of coordinatively unsaturated osmium and ruthenium stannyl complexes

Treatment of MHCl(CO)(PPh₃)₃ (M=Ru, Os) with (CH₂=CH)SnR₃ is a good general route to the coordinatively unsaturated osmium and ruthenium stannyl complexes M(SnR₃)Cl(CO)(PPh₃)₂ (1: M=Ru, R=Me; 2: M=Ru, R = n-butyl; 3: M=Ru, R = p-tolyl; 4: M=Os, R=Me). These coordinatively unsaturated complexes readily add CO and CN-p-tolyl to form the coordinatively saturated compounds M(SnR₃)Cl(CO)L(PPh₃)₂ (5: M=Ru, R=Me, L=CO; 6: M=;Ru, R = n-butyl, L=CO; 7: M=Ru, R = p-tolyl, L=CO; 8: M=Os, R=Me, L=CO; 9: M=Ru, R=Me, L=CN-p-tolyl; 10: M=Ru, R = n-butyl, L=CN-p-tolyl; 11: M=Os, R=Me, L=CN-p-tolyl). In addition, the chloride ligand in Ru(SnR₃)Cl(CO)(PPh₃)₂ proves to be labile and treatment with the potentially bidentate anionic ligands, dimethyldithiocarbamate or diethyldithiocarbamate, affords the coordinatively saturated compounds Ru(SnR₃)(η²-S₂CNR′₂)(CO)(PPh₃)₂ (12: R=Me, R′ = Me; 13: R=Me, R′ = Et; 14: R = n-butyl, R′ = Me; 15: R = p-tolyl, R′ = Me; 16: R = p-tolyl, R′ = Et). Chloride is also displaced by carboxylates forming the six-coordinate compounds Ru(SnR₃)(η²-O₂CR′)(CO)(PPh₃)₂ (17: R=Me, R′ = H; 18: R=Me, R′ = Me; 19: R=Me, R′ = Ph; 20: R = n-butyl, R′ = Me; 21: R = p-tolyl, R′ = Me). IR and ¹H NMR spectral data for all the new compounds and ³¹P and ¹¹⁹Sn NMR spectral data for selected compounds are reported.     

Probing fluorescence induction in chloroplasts on a nanosecond time scale utilizing picosecond laser pulse pairs

The fluorescence induction and other fluorescence properties of spinach chloroplasts at room temperature were probed utilizing two 30-ps wide laser pulses (530 nm) spaced Δt (s) apart in time (Δt = 5–110 ns). The energy of the first pulse (P₁) was varied (10¹²–10¹⁶ photons · cm⁻²), while the energy of the second (probe) pulse (P₂) was held constant (5 · 10¹³ photons · cm⁻²). A gated (10 ns) optical multichannel analyzer-spectrograph system allowed for the detection of the fluorescence generated either by P₁ alone, or by P₂ alone (preceded by P₁). The dominant effect observed for the fluorescence yield generated by P₁ alone is the usual singlet-singlet exciton annihilation which gives rise to a decrease in the yield at high energies. However, when the fluorescence yield of dark-adapted chloroplasts is measured utilizing P₂ (preceded by pulse P₁) an increase in this yield is observed. The magnitude of this increase depends on Δt, and is characterized by a time constant of 28 ± 4 ns. This rise in the fluorescence yield is attributed to a reduction of the oxidized (by P₁) reaction center P-680⁺ by a primary donor. At high pulse energies (P₁ = 4 · 10¹⁴ photons · cm⁻²) the magnitude of this fluorescence induction is diminished by another quenching effect which is attributed to triplet excited states generated by intense P₁ pulses. Assuming that the P₁ pulse energy dependence of the fluorescence yield rise reflects the closing of the reaction centers, it is estimated that about 3–4 photon hits per reaction center are required to close completely the reaction centers, and that there are 185–210 chlorophyll molecules per Photosystem II reaction center.     

Gold in organic synthesis Part 2. Preparation of benzyl-alkyl and-arylketones via C---C coupling

Reaction of [Au(η²-Ar){CH₂C(O)R}Cl] (Ar=C₆H₄N=N- Ph-₂, R=Me, C₆H₂(OMe)₃-3′,4′,5′; Ar=C₆H₃(N=NC₆H₄Me- 4′)-2, Me-5, R=Me) with PPh₃ and NaClO₄·H₂O (1:2:1) at room temperature, leads to reductive elimination giving [Au(PPh₃)₂]ClO₄ and the corresponding carbon-carbon coupling product ArCH₂C(O)R. A similar process takes place when complexes [Au(η²-Ar){CH₂C(O)R}(PPh₃)Cl] are refluxed in tetrahydrofuran, through elimination of [Au(PPh₃)Cl].     

Prostaglandin E1 specific binding in rhesus myometrium

Myometrial low speed supernatant prepared from non-pregnant rhesus uteri was incubated with ³H-Prostaglandin (PG) E₁ with or without addition of unlabelled prostaglandins. The uptake of ³H-PGE₁ was inhibited in a dose dependent fashion by PGE₂>PGE₁>PGA₁>PGF₂=PGA₁>PGB₁=PGB₂≥PGD₂. PGE₁ metabolites inhibited ³H-PGE₁ binding in the following order: 13,14-dihydro-PGE₁>13,14-dihydro-15-keto-PGE₁=15-keto-PGE₁. The specific binding of ³H-PGE₁ and ³H-PGF₂ was similarly affected by the temperature and time of incubation. Equilibrium binding constants determined using rhesus uteri obtained during the luteal phase of the menstrual cycle indicate the presence of high affinity PGE₁ binding sites with an average (n=3) apparent dissociation constant of 2.2 × 10⁻⁹M and a lower affinity PGE₁ binding site with a K_d 1 × 10⁻⁸M. No high affinity — low capacity ³H-PGF₂ sites could be demonstrated.

Relative uterine stimulating potencies of some natural prostaglandins and prostaglandin analogs tested after acute intravenous administration in mid-pregnant rhesus monkeys corresponded with the PGE₁ binding inhibition of the respective compound. The uterine stimulating potencies of the prostaglandin analogs tested were: (15S)-15-methyl-PGE₂=16,16-dimethyl-PGE₂>17-phenyl-18,19,20-trinor-P GE₂>16 phenoxy-17,18,19,20-tetranor-PGE₂=PGE₂=PGE₁=(15S)-15-methyl-PGE₂>PGF₂.     

Uptake and light activated esterification of P by isolated chloroplasts

1. 1. Esterification of ³²P₁ by illuminated chloroplasts prepared on a sucrose gradient was examined to establish the optimal incubation conditions.

2. 2. The evidence is consistent with phosphorylation being closely coupled to the sum of noncyclic and pseudocyclic electron flow and with the rate of electron flow responding to the availability of electron acceptors.

3. 3. Apparent K_m values for ADP and Mg²⁺ were found to be 40 and 250 μM, respectively. The K_m value for Mg²⁺ was increased by the presence of Ca²⁺. Two apparent values were observed for P₁ at 0.2 and 1.1 mM. Chloroplast damage resulted in increased apparent K_m (P₁) values.

4. 4. Acceleration of the esterification resulting from the addition of ADP and P₁ to the medium indicated that these compounds were able to penetrate to the active site of esterification.

5. 5. Ribose 5-phosphate (Rib-5-P) was shown to inhibit P₁ esterification without affecting the apparent K_m for ADP or P₁. The evidence suggests that Rib-5-P interferes with the uptake of P₁, and possibly ADP.

Inhibition of human gastric and pancreatic lipases by chiral alkylphosphonates. A kinetic study with 1,2-didecanoyl-sn-glycerol monolayer

Enantiomerically pure alkylphosphonate compounds RR′P(O)PNP (R=C_nH_2n+1, R′=OY with Y=C_n′H_2n′+1 with n=n′ or n≠n′; PNP=p-nitrophenoxy) noted (RY), mimicking the transition state occurring during the carboxyester hydrolysis were synthesized and investigated as potential inhibitors of human gastric lipase (HGL) and human pancreatic lipase (HPL). The inhibitory properties of each enantiomer have been tested with the monomolecular films technique in addition to an enyzme linked immunosorbent assay (ELISA) in order to estimate simultaneously the residual enzymatic activity as well as the interfacial lipase binding. With both lipases, no obvious correlation between the inhibitor molar fraction (₅₀) leading to half inhibition, and the chain length, R or Y was observed. (R₁₁Y₁₆)s were the best inhibitor of HPL and (R₁₀Y₁₁)s were the best inhibitors of HGL. We observed a highly enantioselective discrimination, both with the pure enantiomeric alkylphosphonate inhibitors as well as a scalemic mixture. We also showed, for the first time, that this enantioselective recognition can occur either during the catalytic step or during the initial interfacial adsorption step of the lipases. These experimental results were analyzed with two kinetic models of covalent as well as pseudo-competitive inhibition of lipolytic enzymes by two enantiomeric inhibitors.     

A novel series of complexones with bis- or biazole structure as mixed ligands of paramagnetic contrast agents for MRI

We describe the syntheses, physicochemical properties and biological evaluation of a novel series of complexones containing bis- or biazoles moieties and two iminodiacetic acid units as novel ligands for paramagnetic lanthanides. The complexones were prepared by reaction of the corresponding 1,1′-bishaloethylbi- or bispyrazoles with methyl iminodiacetate and subsequent NaOH hydrolysis. 1,1′-Bisbromoethyl precursors were obtained by direct alkylation with an excess of 1,2-dibromoethane, or by heating the corresponding alcohol in HCl. Sigmoidal binding isotherms and MO calculations supported as most stable structures in solution, those containing two Gd(III) atoms bound per molecule of complexone with half saturation values S_0.5 (M⁻¹, 22 °C, pH 7.2) in the range 6.5 10⁻⁶0.5<36.1 10⁻⁶. Relaxivity properties [r₁, r₂, s⁻¹ mM⁻¹ Gd(III)] determined at 1.5 Tesla gave values (12.0<r₁<17.7, 12.2<r₂<20), improving significantly the relaxivities of reference compounds such as Gd(III)EDTA (5.2, 5.6) or Gd(III)DTPA (4.30, 4.30). These improvements involve mainly increased hydration and slower rotational motions. In vitro toxicity experiments are reported.     

Bite angle dependence of the rate of reductive elimination from diphosphine palladium complexes

The thermal stability of a set of complexes of the type P₂PdMeR, generated in situ, has been investigated in the temperature range −30 °C to ambient, with the intention of determining the relationship between the ligand bite angle and reactivity in reductive elimination. In this series P₂ was either 1,3-(diphenylphosphino)propane (dppp), 1,1′-(diphenylphosphino)ferrocene (dppf) or 1,1′-(diphenylphosphino)ruthenocene (dppr), and R was phenyl or E-2-(4-methoxyphenyl)ethenyl. Clear trends were observed; the dppp complexes were much more stable than the others, and the phenylpalladium complexes were more stable than their vinylpalladium counterparts. The observed trends fit with the idea that the reductive elimination step in palladium cross-coupling is facilitated by a ligand with a large interchelate angle. The dppr complexes were significantly more labile than their dppf analogues.     

Isolation and antimalarial activity of peroxydisulfate oxidation products of primaquine

Five compounds formed by peroxydisulfate oxidation of primaquine were isolated using chromatographic methods and evaluated for antimalarial activity in vitro. One compound 6-methoxy-5,8 bis(4′-amino-1′-methylbutylamino)quinoline [P₁] was found to have good gametocytocidal activity against Plasmodium yoelli infected mice at 10 mg kg⁻¹ dose in vivo.     

Reaction of sulfur diimides with organoboranes — studied by multinuclear magnetic resonance in solution

Reactions between sulfur diimides R(NSN)R′ (R=R′=^tBu (1a), SiMe₃ (1b), SnMe₃ (1c); R=^tBu, R′=SnMe₃ (1d); R=SiMez₃, R′=SnMe₃ (1e)) and various organoboranes were studied, and the products were characterized by multinuclear magnetic resonance data (¹H, ¹¹B, ¹³C, ¹⁵N, ²⁹Si and ¹¹⁹Sn NMR). Tetraalkyldiboranes(6) (Et₂BH₂BEt₂ (2), dimeric 9-borobicyclo[3,3.1]nonane (3)) react with 1a and 1b by 1,3-hydroboration to give the N-sulfanyl-dialkylaminoboranes 4 and 5 which are instable with respect to eliminatio of short-lived [R---NS]. Trialkylboranes (Et₃B (8)) react only sluggishly with 1a, but more readily with 1b mainly via S-ethylation, formally a 1,2-ethyloboration, to give the diethylborylamido-imino-ethanesulfinic acid 9b decomposes slowly at room temperature via ethene elimination to give 4b, followed by further decomposition via [R---NS] elimination. The compounds 9 can be prepared independently from the reaction between the N-lithio-imino-ethanesulfinic acid amide 10 and diorganoboron halides. The molecular structure of the lithium amide 10a (R=R′=tBu) was determined by X-ray analysis as a dimer in which the four nitrogen, two sulfur and two lithium atoms adopt a boat conformation, in contrast with other known derivatives of this type. If the sulfur diimides bear at least one trimethylstannyl group (1c-e), their reactions with Et₃B (8), iPr₃B (12) or 9-iso-butyl-9-borabicyclo[3,3,1]nonane (13) lead to the novel aminoboranes 14–16. These are products of a 1,1,-organoboration, since the Me₃Sn group moves from one nitrogen atom to the other, and both the boryl and an alkyl group end up at the same nitrogen atom.     

Misdirected π-donor ligands: (η-C5H5)2Zr(Cl) (SR) with sterically more demanding R groups have lower rotational barriers

Rotational barriers about the M-S bonds of 16-electron bent metallocene monothiolates (η⁵-C₅H₅)₂Zr(Cl) (SR) (R = −CH₃, −CH₂CH₃, −CH(CH₃)₂, −C(CH₃)₃) (1a–d) have been measured by dynamic ¹H NMR methods: 32, 33, 35 and 26 kJ mol⁻¹, respectively. The ground-state orientation about the Zr-S bonds of 1 that maximizes Spπ → Mdπ bonding (Cl-Zr-S-R ≈ 90°) also maximizes CpR steric interaction, whereas the rotational transition-state orientation (Cl-Zr-S-R ≈ 0°) is one that minimizes Spπ → Mdπ bonding and maximizes ClR steric interaction. Deviation from a ground-state orientation that is ideal for Spπ → Mdπ bonding might be expected as the size of the R group and CpR steric interaction increases. Thus, the aberrant trend for the R = −C(CH₃)₃ derivative could be attributed to a ground-state steric effect where the sterically demanding −C(CH₃)₃ group forces an unfavorable (misdirected) orientation for Mdπ-Spπ bonding, but a favorable orientation with respect to CpR and ClR steric interactions. However, the solid-state structures of (η⁵-C₅H₅)₂Zr(SR)₂ (R = −CH₃, −CH₂CH₃, −CH(CH₃)₂, −C(CH₃)₃) (2a–d) exhibit regular variation of their metric parameters as evidenced by their Zr-S-C bond angles of 108, 109, 113, and 124° and S-Zr-S′ bond angles of 97, 99, 100 and 106°, respectively. Neither the S′-Zr-S-R torsion angles nor the dihedral angles that describe the relationship between the S/Zr/S′ and Cp(centroid)/Zr/Cp′ (centroid) planes (both indicators of the relative orientation of the Zr dπ acceptor orbital and the thiolate S pπ donor orbital) reflect the steric demand of the R group. Thus, the size of the R group imposes a measured effect on the geometry of 2 and the tert-butyl group is not extraordinary. Although the enthalpic and entropic effects could not be deconvoluted for rotation about the Zr-S bond of 1 in the present study, literature precedents suggest that both enthalpic and entropic effects may play a role in determining the irregular trend that is observed.     

Lightinduced sulfur-dealkylation of phosphino-thioether nickel(0) complexes

The observation of homolytic S---CH₃ bond cleavage in (Ph₂P(o-C₆H₄)SCH₃)₂Ni⁰ under photochemical conditions has prompted further investigation of nickel(0) complexes and their stability. Tetradentate P₂S′₂ donor ligands (S′ = thioether type S donor) with aromatic rings incorporated into the P to S links, Ph₂P(o-C₆H₄)S(CH₂)₃S(o-C₆H₄)PPh₂ (arom-PSSP), or the S to S links, Ph₂P(CH₂)₂SCH₂(o-C₆H₄)CH₂S(CH₂)₂PPh₂ (PS-xy-SP), have been used to form four-coordinate, square planar nickel(II) complexes, [(arom-PSSP)Ni](BF₄)₂ (2) and [(PS-xy-SP)Ni](BF₄)₂ (3). The bidentate and tetradentate ligands, Ph₂P(o-C₆H₄)SCH₂CH₃ (arom-PSEt) and Ph₂P(CH₂)₂S(CH₂)₃S(CH₂)₂PPh₂ (PSSP), give similar complexes, [(arom-PSEt)₂Ni](BF₄)₂ (1) and [(PSSP)Ni](BF₄)₂ (4), respectively. Cyclic voltammograms of the Ni¹¹ complexes in CH₃CN show two reversible redox events assigned to and . The one-electron reduction product produced by stoichiometric amounts of Cp₂Co can be characterized by EPR. At 100 K rhombic signals show hyperfine coupling to two phosphorus atoms. Complete bulk chemical reduction of complexes 1, 2, 3 and 4 with Na/Hg amalgam provided the corresponding nickel(0) complexes 1^R, 2^R, 3^R and 4^R which were isolated as red solutions or solids characterized by magnetic resonance properties and reaction products. Photolysis of these nickel(0) complexes leads to S-dealkylation to produce alkyl radicals and dithiolate nickel(II) complexes. Complex 3 crystallized in the monoclinic space group P_2t/c with a=20.740(5), B=9.879(3), C=17.801(4) åA, ß=92.59(2)°, V=3644(2) ų and Z=4; complex 4: P2₁/c with A=13.815(4), B=13.815(4), C=15.457(5) åA, V=3365.4(14) ų and Z=4.     

Detection of ribose-methylated nucleotides in Pyrodictium occultum tRNA by liquid chromatography—frit-fast atom bombardment mass spectrometry

Ribose-methylated dinucleotides of the type NmpN′ derived from digestion of tRNA with RNase T₂ were separated and characterized by directly combined liquid chromatography—mass spectrometry (LC—MS) with a continuous-flow frit-fast atom bombardment (frit-FAB) interface. Prediction of NmpN′ peaks was readily made by comparison of the LC profile with that of comparative nuclease P₁ digest. The identity of the candidate peaks including NmpN′ was further recognized by the mass spectra, in which NmpN′ showed intense molecular-related ions, in addition to sequence-specific fragment ions, to verify the chemical structures in both positive- and negative-ion modes. The method was applied to screening NmpN′ (and NmpN′mpN″) in tRNA from the extremely thermophilic archaeon Pyrodictium occultum.     

Reactions of tungsten phosphonium carbyne complexes with aryloxide nucleophiles to form aryloxycarbyne and η-ketenyl complexes

Tungsten phosphoranylideneketene complexes of the type Tp′(CO)(p-OC₆H₄R)W(η²-(C,C)---O=CC---PR′₂Ph) (R=NO₂, R′=Me (6a); R=NO₂, R′=Ph (6b); R=CN, R′=Me (7a); R=CN, R′=Ph (7b); R=Cl, R′=Ph (8b)) have been synthesized from phosphonium carbyne precursors in a reaction that reflects coupling of carbonyl and carbyne ligands. In addition to these products, aryloxycarbyne complexes Tp′(CO)₂WCO(p-C₆H₄NO₂) (9a), Tp′(CO)₂WCO(p-C₆H₄CN) (9b), and Tp′(CO)₂WCO(p-C₆H₄Cl) (9c)) have been prepared via substitution of the phosphonium carbyne phosphine with an aryloxide nucleophile. The product ratio of substitution at the carbyne carbon to carbonyl–carbyne coupling can be tuned by variation of the aryloxide para-substituent. Aryloxy carbyne complexes are the favored products with stronger nucleophiles, while weaker nucleophiles result in a mixture of aryloxy carbyne complexes and η²-ketenyl coupled complexes. Formation of η²-ketenyl complexes is favored for the least nucleophilic aryloxides. Ketenyl complexes 6a and 6b were methylated at the ketenyl oxygen to form cationic alkyne complexes [Tp′(CO)(p-OC₆H₄NO₂)W(η²-(C,C)---CH₃OCCPR₂Ph)][OTf] (R=Me (10a), R=Ph (10b)). The structures of η²-ketenyl complexes 6a and 7b and the structure of cationic alkyne complex 10a were determined by X-ray crystallography.