The crystal structure of the plexin-semaphorin-integrin domain/hybrid domain/I-EGF1 segment from the human integrin beta2 subunit at 1.8-A resolution

Integrins are modular (alphabeta) heterodimeric proteins that mediate cell adhesion and convey signals across the plasma membrane. Interdomain motions play a key role in signal transduction by propagating structural changes through the molecule, thus controlling the activation state and adhesive properties of the integrin. We expressed a soluble fragment of the human integrin beta2 subunit comprising the plexin-semaphorin-integrin domain (PSI)/hybrid domain/I-EGF1 fragment and present its crystal structure at 1.8-A resolution. The structure reveals an elongated molecule with a rigid architecture stabilized by nine disulfide bridges. The PSI domain is located centrally and participates in the formation of extended interfaces with the hybrid domain and I-EGF1 domains, respectively. The hybrid domain/PSI interface involves the burial of an Arg residue, and contacts between PSI and I-EGF1 are mainly mediated by well conserved Arg and Trp residues. Conservation of key interacting residues across the various integrin beta subunits sequences suggests that our structure represents a good model for the entire integrin family. Superposition with the integrin beta3 receptor in its bent conformation suggests that an articulation point is present at the linkage between its I-EGF1 and I-EGF2 modules and underlines the importance of this region for the control of integrin-mediated cell adhesion.     

Cysteine-rich module structure reveals a fulcrum for integrin rearrangement upon activation

Cysteine-rich repeats in the integrin beta subunit stalk region relay activation signals to the ligand-binding headpiece. The NMR solution structure and disulfide bond connectivity of Cys-rich module-3 of the integrin beta2 subunit reveal a nosecone-shaped variant of the EGF fold, termed an integrin-EGF (I-EGF) domain. Interdomain contacts between I-EGF domains 2 and 3 observed by NMR support a model in which the modules are related by an approximate two-fold screw axis in an extended arrangement. Our findings complement a 3.1 A crystal structure of the extracellular portion of integrin alphaVbeta3, which lacks an atomic model for I-EGF2 and a portion of I-EGF3. The disulfide connectivity of I-EGF3 chemically assigned here differs from the pairings suggested in the alphaVbeta3 structure. Epitopes that become exposed upon integrin activation and residues that restrain activation are defined in beta2 I-EGF domains 2 and 3. Superposition on the alphaVbeta3 structure reveals that they are buried. This observation suggests that the highly bent alphaVbeta3 structure represents the inactive conformation and that release of contacts with I-EGF modules 2 and 3 triggers a switchblade-like opening motion extending the integrin into its active conformation.     

Transition from rolling to firm adhesion can be mimicked by extension of integrin alphaLbeta2 in an intermediate affinity state

AlphaLbeta2 affinity for intercellular adhesion molecule-1 (ICAM-1) is regulated by the conformation of the alphaL I domain, which is in turn controlled by the conformation and orientation of other adjacent domains. Additionally, overall integrin conformation (bent versus straightened) influences the orientation of the I domain and access to its ligands, influencing adhesive efficiency. The open or high affinity I domain conformation supports strong adhesion, whereas the closed, low affinity conformation mediates weak interactions or rolling. We have previously suggested that alphaLbeta2 can also exist on the cell surface in an intermediate affinity state. Here we have studied the adhesive properties of integrin alphaLbeta2 containing mutant I domains with intermediate affinities for ICAM-1. In an overall bent conformation, the intermediate affinity state of alphaLbeta2 is hardly detected by conventional adhesion assays, but robust adhesion is seen when an extended conformation is induced by a small molecule alpha/beta I allosteric antagonist. Intermediate affinity alphaLbeta2 supports more stable rolling than wild-type alphaLbeta2 under shear conditions. Moreover, antagonist-induced extension transforms rolling adhesion into firm adhesion in a manner reminiscent of chemokine activation of integrin alphaLbeta2. These findings suggest the relevance of intermediate affinity states of alphaLbeta2 to the transition between inactive and active states and demonstrate the importance of both I domain affinity and overall integrin conformation for cell adhesion.     

The Novel S527F Mutation in the Integrin ��3 Chain Induces a High Affinity ��IIb��3 Receptor by Hindering Adoption of the Bent Conformation

Three heterozygous mutations were identified in the genes encoding platelet integrin receptor αIIbβ3 in a patient with an ill defined platelet disorder: one in the β3 gene (S527F) and two in the αIIb gene (R512W and L841M). Five stable Chinese hamster ovary cell lines were constructed expressing recombinant αIIbβ3 receptors bearing the individual R512W, L841M, or S527F mutation; both the R512W and L841M mutations; or all three mutations. All receptors were expressed on the cell surface, and mutations R512W and L841M had no effect on integrin function. Interestingly, the β3 S527F mutation produced a constitutively active receptor. Indeed, both fibrinogen and the ligand-mimetic antibody PAC-1 bound to non-activated αIIbβ3 receptors carrying the S527F mutation, indicating that the conformation of this receptor was altered and corresponded to the high affinity ligand binding state. In addition, the conformational change induced by S527F was evident from basal anti-ligand-induced binding site antibody binding to the receptor. A molecular model bearing this mutation was constructed based on the crystal structure of αIIbβ3 and revealed that the S527F mutation, situated in the third integrin epidermal growth factor-like (I-EGF3) domain, hindered the αIIbβ3 receptor from adopting a wild type-like bent conformation. Movement of I-EGF3 into a cleft in the bent conformation may be hampered both by steric hindrance between Phe⁵²⁷ in β3 and the calf-1 domain in αIIb and by decreased flexibility between I-EGF2 and I-EGF3.The platelet receptor αIIbβ3 belongs to the family of integrin receptors that consist of noncovalently linked α/β-heterodimers. They are cell-surface receptors that play a role in cell-cell and cell-matrix interactions. Under resting conditions, integrin receptors adopt the low affinity conformation and do not interact with their ligands. Inside-out signaling turns the receptor into a high affinity conformation capable of ligand binding. Ligand binding itself induces additional conformational changes resulting in exposure of neoantigenic sites called ligand-induced binding sites (LIBS)³ and generates in turn outside-in signaling, which triggers a range of downstream signals (1, 2).Integrin αIIbβ3 is expressed on platelets and megakaryocytes. In flowing blood under resting conditions, αIIbβ3 does not interact with its ligand fibrinogen. When a blood vessel is damaged, platelets adhere at sites of vascular injury and become activated. As a consequence, αIIbβ3 adopts the high affinity conformation and binds fibrinogen. This results in platelet aggregation and thrombus formation, which eventually will stop the bleeding (3).The topology of integrins comprises an extracellular, globular, N-terminal ligand-binding head domain (the β-propeller domain in the αIIb chain and the βI domain in the β3 chain) standing on two long legs or stalks (consisting of thigh, calf-1, and calf-2 domains in the αIIb chain and hybrid, plexin/semaphorin/integrin (PSI), four integrin endothelial growth factor-like (I-EGF), and β-tail domains in the β3 chain), followed by transmembrane and cytoplasmic domains (1, 2). X-ray crystal structures of the extracellular domain of non-activated αVβ3 revealed that the legs are severely bent, putting the head domain next to the membrane-proximal portions of the legs (4, 5). The bending occurs between I-EGF1 and I-EGF2 in the β-subunit and between the thigh and calf-1 domains in the α-subunit. This bent conformation represents the low affinity state of the receptor. The high affinity state of the receptor is induced by activation and is associated with a large-scale conformational rearrangement in which the integrin extends with a switchblade-like motion (2). Recently, the crystal structure of the entire extracellular domain of αIIbβ3 in its low affinity conformation was resolved and revealed that this integrin also adopts the bent conformation under resting conditions (6). Structural rearrangements in αIIbβ3 between the bent and extended conformations are similar to what has been reported for other integrins (7).We report here that the S527F mutation in the I-EGF3 region of the β3 polypeptide chain of the αIIbβ3 receptor induces a constitutively active receptor adopting an extended high affinity conformation. This was evidenced by spontaneous PAC-1, fibrinogen, and anti-LIBS antibody binding. These data were further corroborated by modeling the replacement of Ser⁵²⁷ with Phe in the crystal structure of the extracellular domain of αIIbβ3. In this model, the S527F mutation decreases the flexibility of I-EGF3 and appears to prevent movement of the lower β-leg into the cleft between the upper β-leg and the lower α-leg. As a consequence, formation of the bent conformation of the non-activated receptor is hampered.     

Importance of force linkage in mechanochemistry of adhesion receptors

The alpha subunit-inserted (I) domain of integrin alphaLbeta2 [lymphocyte function-associated antigen-1 (LFA-1)] binds to intercellular adhesion molecule-1 (ICAM-1). The C- and N-termini of the alpha I domain are near one another on the "lower" face, opposite the metal ion-dependent adhesion site (MIDAS) on the "upper face". In conversion to the open alpha I domain conformation, a 7 A downward, axial displacement of C-terminal helix alpha7 is allosterically linked to rearrangement of the MIDAS into its high-affinity conformation. Here, we test the hypothesis that when an applied force is appropriately linked to conformational change, the conformational change can stabilize adhesive interactions that resist the applied force. Integrin alpha I domains were anchored to the cell surface through their C- or N-termini using type I or II transmembrane domains, respectively. C-terminal but not N-terminal anchorage robustly supported cell rolling on ICAM-1 substrates in shear flow. In contrast, when the alphaL I domain was mutationally stabilized in the open conformation with a disulfide bond, it mediated comparable levels of firm adhesion with type I and type II membrane anchors. To exclude other effects as the source of differential adhesion, these results were replicated using alpha I domains conjugated through the N- or C-terminus to polystyrene microspheres. Our results demonstrate a mechanical feedback system for regulating the strength of an adhesive bond. A review of crystal structures of integrin alpha and beta subunit I domains and selectins in high- and low-affinity conformations demonstrates a common mechanochemical design in which biologically applied tensile force stabilizes the more extended, high-affinity conformation.     

One-Way Allosteric Communication between the Two Disulfide Bonds in Tissue Factor

Tissue factor (TF) is a transmembrane glycoprotein that plays distinct roles in the initiation of extrinsic coagulation cascade and thrombosis. TF contains two disulfide bonds, one each in the N-terminal and C-terminal extracellular domains. The C-domain disulfide, Cys186-Cys209, has a ?RHStaple configuration in crystal structures, suggesting that this disulfide carries high pre-stress. The redox state of this disulfide has been proposed to regulate TF encryption/decryption. Ablating the N-domain Cys49-Cys57 disulfide bond was found to increase the redox potential of the Cys186-Cys209 bond, implying an allosteric communication between the domains. Using molecular dynamics simulations, we observed that the Cys186-Cys209 disulfide bond retained the ?RHStaple configuration, whereas the Cys49-Cys57 disulfide bond fluctuated widely. The Cys186-Cys209 bond featured the typical ?RHStaple disulfide properties, such as a longer S-S bond length, larger C-S-S angles, and higher bonded prestress, in comparison to the Cys49-Cys57 bond. Force distribution analysis was used to sense the subtle structural changes upon ablating the disulfide bonds, and allowed us to identify a one-way allosteric communication mechanism from the N-terminal to the C-terminal domain. We propose a force propagation pathway using a shortest-pathway algorithm, which we suggest is a useful method for searching allosteric signal transduction pathways in proteins. As a possible explanation for the pathway being one-way, we identified a pronounced lower degree of conformational fluctuation, or effectively higher stiffness, in the N-terminal domain. Thus, the changes of the rigid domain (N-terminal domain) can induce mechanical force propagation to the soft domain (C-terminal domain), but not vice versa.     

Dissociation of the α-subunit Calf-2 domain and the β-subunit I-EGF4 domain in integrin activation and signaling

Integrin conformational changes mediate integrin activation and signaling triggered by intracellular molecules or extracellular ligands. Even though it is known that αβ transmembrane domain separation is required for integrin signaling, it is still not clear how this signal is transmitted from the transmembrane domain through two long extracellular legs to the ligand-binding headpiece. This study addresses whether the separation of the membrane-proximal extracellular αβ legs is critical for integrin activation and outside-in signaling. Using a disulfide bond to restrict dissociation of the α-subunit Calf-2 domain and β-subunit I-EGF4 domain, we were able to abolish integrin inside-out activation and outside-in signaling. In contrast, disrupting the interface by introducing a glycosylation site into either subunit activated integrins for ligand binding through a global conformational change. Our results suggest that the interface of the Calf-2 domain and the I-EGF4 domain is critical for integrin bidirectional signaling.     

Transition from rolling to firm adhesion is regulated by the conformation of the I domain of the integrin lymphocyte function-associated antigen-1

The integrin lymphocyte function-associated antigen-1 (alpha(L)beta(2)), which is known for its ability to mediate firm adhesion and migration, can also contribute to tethering and rolling in shear flow. The alpha(L) I domain can be mutationally locked with disulfide bonds into two distinct conformations, open and closed, which have high and low affinity for the ligand intercellular adhesion molecule 1 (ICAM-1), respectively. The wild type I domain exists primarily in the lower energy closed conformation. We have measured for the first time the effect of conformational change on adhesive behavior in shear flow. We show that wild type and locked open I domains, expressed in alpha(L)beta(2) heterodimers or as isolated domains on the cell surface, mediate rolling adhesion and firm adhesion, respectively. alpha(L)beta(2) is thus poised for the conversion of rolling to firm adhesion upon integrin activation in vivo. Isolated I domains are surprisingly more effective than alpha(L)beta(2) in interactions in shear flow, which may in part be a consequence of the presence of alpha(L)beta(2) in a bent conformation. Furthermore, the force exerted on the C-terminal alpha-helix appears to stabilize the open conformation of the wild type isolated I domain and contribute to its robustness in supporting rolling. An allosteric small molecule antagonist of alpha(L)beta(2) inhibits both rolling adhesion and firm adhesion, which has important implications for its mode of action in vivo.     

EM Structure of the Ectodomain of Integrin CD11b/CD18 and Localization of Its Ligand-Binding Site Relative to the Plasma Membrane

One-half of the integrin α-subunit Propeller domains contain and extra vWFA domain (αA domain), which mediates integrin binding to extracellular physiologic ligands via its metal-ion-dependent adhesion site (MIDAS). We used electron microscopy to determine the 3D structure of the αA-containing ectodomain of the leukocyte integrin CD11b/CD18 (αMβ2) in its inactive state. A well defined density for αA was observed within a bent ectodomain conformation, while the structure of the ectodomain in complex with the Fab fragment of mAb107, which binds at the MIDAS face of CD11b and stabilizes the inactive state, further revealed that αA is restricted to a relatively small range of orientations relative to the Propeller domain. Using Fab 107 as probe in fluorescent lifetime imaging microscopy (FLIM) revealed that αA is positioned relatively far from the membrane surface in the inactive state, and a systematic orientation search revealed that the MIDAS face would be accessible to extracellular ligand in the inactive state of the full-length cellular integrin. These studies are the first to define the 3D EM structure of an αA-containing integrin ectodomain and to position the ligand-binding face of αA domain in relation to the plasma membrane, providing new insights into current models of integrin activation.     

Structural and functional studies with antibodies to the integrin beta 2 subunit. A model for the I-like domain

To establish a structure and function map of the beta2 integrin subunit, we mapped the epitopes of a panel of beta2 monoclonal antibodies including function-blocking, nonblocking, and activating antibodies using human/mouse beta2 subunit chimeras. Activating antibodies recognize the C-terminal half of the cysteine-rich region, residues 522-612. Antibodies that do not affect ligand binding map to residues 1-98 and residues 344-521. Monoclonal antibodies to epitopes within a predicted I-like domain (residues 104-341) strongly inhibit LFA-1-dependent adhesion. These function-blocking monoclonal antibodies were mapped to specific residues with human --> mouse knock-out or mouse --> human knock-in mutations. Combinatorial epitopes involving residues distant in the sequence provide support for a specific alignment between the beta-subunit and I domains that was used to construct a three-dimensional model. Antigenic residues 133, 332, and 339 are on the first and last predicted alpha-helices of the I-like domain, which are adjacent on its "front." Other antigenic residues in beta2 and in other integrin beta subunits are present on the front. No antigenic residues are present on the "back" of the domain, which is predicted to be in an interface with other domains, such as the alpha subunit beta-propeller domain. Most mutations in the beta2 subunit in leukocyte adhesion deficiency are predicted to be buried in the beta2 subunit I-like domain. Two long insertions are present relative to alpha-subunit I-domains. One is tied down to the back of the I-like domain by a disulfide bond. The other corresponds to the "specificity-determining loop" defined in beta1 and beta3 integrins and contains the antigenic residue Glu(175) in a disulfide-bonded loop located near the "top" of the domain.     

Localization of disulfide bonds in the cystine knot domain of human von Willebrand factor

von Willebrand factor (VWF) is a multimeric glycoprotein that is required for normal hemostasis. After translocation into the endoplasmic reticulum, proVWF subunits dimerize through disulfide bonds between their C-terminal cystine knot-like (CK) domains. CK domains are characterized by six conserved cysteines. Disulfide bonds between cysteines 2 and 5 and between cysteines 3 and 6 define a ring that is penetrated by a disulfide bond between cysteines 1 and 4. Dimerization often is mediated by additional cysteines that differ among CK domain subfamilies. When expressed in a baculovirus system, recombinant VWF CK domains (residues 1957-2050) were secreted as dimers that were converted to monomers by selective reduction and alkylation of three unconserved cysteine residues: Cys(2008), Cys(2010), and Cys(2048). By partial reduction and alkylation, chemical and proteolytic digestion, mass spectrometry, and amino acid sequencing, the remaining intrachain disulfide bonds were characterized: Cys(1961)-Cys(2011) (), Cys(1987)-Cys(2041) (), Cys(1991)-Cys(2043) (), and Cys(1976)-Cys(2025). The mutation C2008A or C2010A prevented dimerization, whereas the mutation C2048A did not. Symmetry considerations and molecular modeling based on the structure of transforming growth factor-beta suggest that one or three of residues Cys(2008), Cys(2010), and Cys(2048) in each subunit mediate the covalent dimerization of proVWF.     

Determination of the disulfide structure and N-glycosylation sites of the extracellular domain of the human signal transducer gp130

gp130 is the common signal transducing receptor subunit for the interleukin-6-type family of cytokines. Its extracellular region (sgp130) is predicted to consist of five fibronectin type III-like domains and an NH2-terminal Ig-like domain. Domains 2 and 3 constitute the cytokine-binding region defined by a set of four conserved cysteines and a WSXWS motif, respectively. Here we determine the disulfide structure of human sgp130 by peptide mapping, in the absence and presence of reducing agent, in combination with Edman degradation and mass spectrometry. Of the 13 cysteines present, 10 form disulfide bonds, two are present as free cysteines (Cys(279) and Cys(469)), and one (Cys(397)) is modified by S-cysteinylation. Of the 11 potential N-glycosylation sites, Asn(21), Asn(61), Asn(109), Asn(135), Asn(205), Asn(357), Asn(361), Asn(531), and Asn(542) are glycosylated but not Asn(224) and Asn(368). The disulfide bonds, Cys(112)-Cys(122) and Cys(150)-Cys(160), are consistent with known cytokine-binding region motifs. Unlike granulocyte colony-stimulating factor receptor, the connectivities of the four cysteines in the NH2-terminal domain of gp130 (Cys(6)-Cys(32) and Cys(26)-Cys(81)) are consistent with known superfamily of Ig-like domains. An eight-residue loop in domain 5 is tethered by Cys(436)-Cys(444). We have created a model predicting that this loop maintains Cys(469) in a reduced form, available for ligand-induced intramolecular disulfide bond formation. Furthermore, we postulate that domain 5 may play a role in the disulfide-linked homodimerization and activation process of gp130.     

Amino acid sequence of the alpha subunit of human leukocyte adhesion receptor Mo1 (complement receptor type 3)

Mo1 (complement receptor type 3, CR3; CD11b/CD18) is an adhesion-promoting human leukocyte surface membrane heterodimer (alpha subunit 155 kD [CD11b] noncovalently linked to a beta subunit of 95 kD [CD18]). The complete amino acid sequence deduced from cDNA of the human alpha subunit is reported. The protein consists of 1,136 amino acids with a long amino-terminal extracytoplasmic domain, a 26-amino acid hydrophobic transmembrane segment, and a 19-carboxyl-terminal cytoplasmic domain. The extracytoplasmic region has three putative Ca2+-binding domains with good homology and one with weak homology to the "lock washer" Ca2+-binding consensus sequence. These metal-binding domains explain the divalent cation-dependent functions mediated by Mo1. The alpha subunit is highly homologous to the alpha subunit of leukocyte p150,95 and to a lesser extent, to the alpha subunit of other "integrin" receptors such as fibronectin, vitronectin, and platelet IIb/IIIa receptors in humans and position-specific antigen-2 (PS2) in Drosophila. Mo1 alpha, like p150, contains a unique 187-amino acid stretch NH2-terminal to the metal-binding domains. This region could be involved in some of the specific functions mediated by these leukocyte glycoproteins.     

Modulation of Integrin Activation by an Entropic Spring in the β-Knee

We show that the length of a loop in the β-knee, between the first and second cysteines (C1-C2) in integrin EGF-like (I-EGF) domain 2, modulates integrin activation. Three independent sets of mutants, including swaps among different integrin β-subunits, show that C1-C2 loop lengths of 12 and longer favor the low affinity state and masking of ligand-induced binding site (LIBS) epitopes. Shortening length from 12 to 4 residues progressively increases ligand binding and LIBS epitope exposure. Compared with length, the loop sequence had a smaller effect, which was ascribable to stabilizing loop conformation, and not interactions with the α-subunit. The data together with structural calculations support the concept that the C1-C2 loop is an entropic spring and an emerging theme that disordered regions can regulate allostery. Diversity in the length of this loop may have evolved among integrin β-subunits to adjust the equilibrium between the bent and extended conformations at different set points.     

Integrin α7β1 is a redox-regulated target of hydrogen peroxide in vascular smooth muscle cell adhesion

Upon adhesion to laminin-111, aortic smooth muscle cells initially form membrane protrusions with an average diameter of 2.9μm. We identified these protrusions also as subcellular areas of increased redox potential and protein oxidation by detecting cysteine sulfenic acid groups with dimedone. Hence, we termed these areas oxidative hot spots. They are spatially and temporally transient during an early stage of adhesion and depend on the activity of the H(2)O(2)-generating NADPH oxidase 4. Presumably located on cellular protrusions, integrin α7β1 mediates adhesion and migration of vascular smooth muscle cells to laminins of their surrounding basement membrane. Using protein chemistry and mass spectrometry, two specific oxidation sites within the integrin α7 subunit were identified: one located in its genu region and another within its calf 2 domain. Upon H(2)O(2) treatment, two cysteine residues are oxidized thereby unlocking a disulfide bridge. The genu region is a hinge, around which the integrin domains pivot between a bent/inactive and an upright/active conformation. Also, cysteine oxidation within the calf 2 domain permits conformational changes related to integrin activation. H(2)O(2) treatment of α7β1 integrin in concentrations of up to 100μM increases integrin binding activity to laminin-111, suggesting a physiological redox regulation of α7β1 integrin.     

Amino acid requirements for formation of the TGF-beta-latent TGF-beta binding protein complexes

Transforming growth factor beta (TGF-beta) is secreted primarily as a latent complex consisting of the TGF-beta homodimer, the TGF-beta propeptides (called the latency-associated protein or LAP) and the latent TGF-beta binding protein (LTBP). Mature TGF-beta remains associated with LAP by non-covalent interactions that block TGF-beta from binding to its receptor. Complex formation between LAP and LTBP is mediated by an intramolecular disulfide exchange between the third 8-cysteine (8-Cys3) domain of LTBP with a pair of cysteine residues in LAP. Only the third 8-Cys domains of LTBP-1, -3, and -4 bind LAP. From comparison of the 8-Cys3(LTBP-1) structure with that of the non-TGF-beta-binding 8-Cys6(fibrillin-1), we observed that a two-residue insertion in 8-Cys3(LTBP-1) increased the potential for disulfide exchange of the 2-6 disulfide bond. We further proposed that five negatively charged amino acid residues surrounding this bond mediate initial protein-protein association. To validate this hypothesis, we monitored binding by fluorescence resonance energy transfer (FRET) analysis and co-expression assays with TGF-beta1 LAP (LAP-1) and wild-type and mutant 8-Cys3 domains. FRET experiments demonstrated ionic interactions between LAP-1 and 8-Cys3. Mutation of the five amino acid residues revealed that efficient complex formation is most dependent on two of these residues. Although 8-Cys3(LTBP-1) binds proTGF-betas effectively, the domain from LTBP-4 does so poorly. We speculated that this difference was due to the substitution of three acidic residues by alanine, serine, and arginine in the LTBP-4 sequence. Additional experiments with 8-Cys3(LTBP-4) indicated that enhanced binding of LAP to 8-Cys3(LTBP-4) is achieved if the residues A, S, and R are changed to those in 8-Cys3(LTBP1) (D, D, and E) and the QQ dipeptide insertion of LTBP-4 is changed to the FP in 8-Cys3(LTBP-1). These studies identify surface residues that contribute to the interactions of 8-Cys3 and LAP-1 and may yield information germane to the interaction of 8-Cys domains and additional TGF-beta superfamily propeptides, an emerging paradigm for growth factor regulation.     

Evidence for activation of tissue factor by an allosteric disulfide bond

Tissue Factor (TF) is the mammalian plasma membrane cofactor responsible for initiation of blood coagulation. Binding of blood coagulation factor VIIa to TF activates the serine proteinase zymogens factors IX and X by limited proteolysis leading to the formation of a thrombin and fibrin meshwork that stabilizes the thrombus. TF on the plasma membrane of cells resides mostly in a cryptic configuration, which rapidly transforms into an active configuration in response to certain stimuli. The extracellular part of TF consists of two fibronectin type III domains. The disulfide bond in the membrane proximal domain (Cys186-Cys209) is atypical for domains of this type in that it links adjacent strands in the same beta sheet, what we have called an allosteric bond. Ablation of the allosteric disulfide by mutating both cysteine residues severely impairs procoagulant activity. The thiol-alkylating agents N-ethylmaleimide and methyl methanethiolsulfonate block TF activation by ionomycin, while the thiol-oxidizing agent HgCl2 and dithiol cross-linkers promote activation. TF activation could not be explained by exposure of phosphatidylserine on the outer leaflet of the plasma membrane. Cryptic TF contained unpaired cysteine thiols that were depleted upon activation, and de-encryption was associated with a change in the conformation of the membrane-proximal domain. These findings imply that the Cys186-Cys209 disulfide bond is reduced in the cryptic form of TF and that activation involves formation of the disulfide. It is likely that formation of this disulfide bond changes the conformation of the domain that facilitates productive binding of factors IX and X.     

H2O2-induced intermolecular disulfide bond formation between receptor protein-tyrosine phosphatases

Receptor protein-tyrosine phosphatase alpha (RPTPalpha) belongs to the subfamily of receptor-like protein-tyrosine phosphatases that are characterized by two catalytic domains of which only the membrane-proximal one (D1) exhibits appreciable catalytic activity. The C-terminal catalytic domain (D2) regulates RPTPalpha catalytic activity by controlling rotational coupling within RPTPalpha dimers. RPTPalpha-D2 changes conformation and thereby rotational coupling within RPTPalpha dimers in response to changes in the cellular redox state. Here we report a decrease in motility of RPTPalpha from cells treated with H2O2 on non-reducing SDS-polyacrylamide gels to a position that corresponds to RPTPalpha dimers, indicating intermolecular disulfide bond formation. Using mutants of all individual cysteines in RPTPalpha and constructs encoding the individual protein-tyrosine phosphatase domains, we located the intermolecular disulfide bond to the catalytic Cys-723 in D2. Disulfide bond formation and dimer stabilization showed similar levels of concentration and time dependence. However, treatment of lysates with dithiothreitol abolished intermolecular disulfide bonds but not stable dimer formation. Intermolecular disulfide bond formation and rotational coupling were also found using a chimera of the extracellular domain of RPTPalpha fused to the transmembrane and intracellular domain of the leukocyte common antigen-related protein (LAR). These results suggest that H2O2 treatment leads to oxidation of the catalytic Cys in D2, which then rapidly forms a disulfide bond with the D2 catalytic Cys of the dyad-related monomer, rendering an inactive RPTP dimer. Recovery from oxidative stress first leads to the reduction of the disulfide bond followed by a slower refolding of the protein to the active conformation.     

An internal ligand-bound,metastable state of a leukocyte integrin, αXβ2

How is massive conformational change in integrins achieved on a rapid timescale? We report crystal structures of a metastable, putative transition state of integrin α_Xβ₂. The α_Xβ₂ ectodomain is bent; however, a lattice contact stabilizes its ligand-binding αI domain in a high affinity, open conformation. Much of the αI α7 helix unwinds, loses contact with the αI domain, and reshapes to form an internal ligand that binds to the interface between the β propeller and βI domains. Lift-off of the αI domain above this platform enables a range of extensional and rotational motions without precedent in allosteric machines. Movements of secondary structure elements in the β₂ βI domain occur in an order different than in β₃ integrins, showing that integrin β subunits can be specialized to assume different intermediate states between closed and open. Mutations demonstrate that the structure trapped here is metastable and can enable rapid equilibration between bent and extended-open integrin conformations and up-regulation of leukocyte adhesiveness.     

Normal ligand binding and signaling by CD47 (integrin-associated protein) requires a long range disulfide bond between the extracellular and membrane-spanning domains.

CD47 is a unique member of the Ig superfamily with a single extracellular Ig domain followed by a multiply membrane-spanning (MMS) domain with five transmembrane segments, implicated in both integrin-dependent and -independent signaling cascades. Essentially all functions of CD47 require both the Ig and MMS domains, raising the possibility that interaction between the two domains is required for normal function. Conservation of Cys residues among CD47 homologues suggested the existence of a disulfide bond between the Ig and MMS domains that was confirmed by chemical digestion and mapped to Cys(33) and Cys(263). Subtle changes in CD47 conformation in the absence of the disulfide were suggested by decreased binding of two anti-Ig domain monoclonal antibodies, decreased SIRPalpha1 binding, and reduced CD47/SIRPalpha1-mediated cell adhesion. Mutagenesis to prevent formation of this disulfide completely disrupted CD47 signaling independent of effects on ligand binding, as assessed by T cell interleukin-2 secretion and Ca(2+) responses. Loss of the disulfide did not affect membrane raft localization of CD47 or its association with alpha(v)beta(3) integrin. Thus, a disulfide bond between the Ig and MMS domains of CD47 is required for normal ligand binding and signal transduction.