pH-Sensitive micelles self-assembled from amphiphilic copolymer brush for delivery of poorly water-soluble drugs

A novel pH-sensitive amphiphilic copolymer brush poly(methyl methacrylate-co-methacrylic acid)-b-poly(poly(ethylene glycol) methyl ether monomethacrylate) [P(MMA-co-MAA)-b-PPEGMA] was defined and synthesized by atom transfer radical polymerization (ATRP) technique. The molecular structures and characteristics of this copolymer and its precursors were confirmed by (1)H NMR, FT-IR, and GPC. The CMC of P(MMA-co-MAA)-b-PPEGMA in aqueous medium was determined to be 1-4 mg/L. This copolymer could self-assemble into micelles in aqueous solution with an average size of 120-250 nm determined by DLS. The morphologies of the micelles were found to be spherical by SEM and TEM. Ibuprofen (IBU), a poorly water-soluble drug, was selected as the model drug and wrapped into the core of micelles via dialysis method. Drug entrapment efficiency reached to 90%. The in vitro release behavior of IBU from these micelles was pH-dependent. The cumulative release percent of IBU was less than 20% of the initial drug content in simulated gastric fluid (SGF, pH 1.2) over 12 h, but 90% was released in simulated intestinal fluid (SIF, pH 7.4) within 6 h. The release profiles showed that the P(MMA-co-MAA)-b-PPEGMA micelles could inhibit the premature burst drug release under the intestinal conditions. All the results indicate that the P(MMA-co-MAA)-b-PPEGMA micelle may be a potential oral drug delivery carrier for poorly water-soluble drugs.     

Bioreducible micelles self-assembled from amphiphilic hyperbranched multiarm copolymer for glutathione-mediated intracellular drug delivery

A new type of biodegradable micelles for glutathione-mediated intracellular drug delivery was developed on the basis of an amphiphilic hyperbranched multiarm copolymer (H40-star-PLA-SS-PEP) with disulfide linkages between the hydrophobic polyester core and hydrophilic polyphosphate arms. The resulting copolymers were characterized by nuclear magnetic resonance (NMR), Fourier transformed infrared (FTIR), gel permeation chromatography (GPC), and differential scanning calorimeter (DSC) techniques. Benefiting from amphiphilic structure, H40-star-PLA-SS-PEP was able to self-assemble into micelles in aqueous solution with an average diameter of 70 nm. Moreover, the hydrophilic polyphosphate shell of these micelles could be detached under reduction-stimulus by in vitro evaluation, which resulted in a rapid drug release due to the destruction of micelle structure. The glutathione-mediated intracellular drug delivery was investigated against a Hela human cervical carcinoma cell line. Flow cytometry and confocal laser scanning microscopy (CLSM) measurements demonstrated that H40-star-PLA-SS-PEP micelles exhibited a faster drug release in glutathione monoester (GSH-OEt) pretreated Hela cells than that in the nonpretreated cells. Cytotoxicity assay of the doxorubicin-loaded (DOX-loaded) micelles indicated the higher cellular proliferation inhibition against 10 mM of GSH-OEt pretreated Hela cells than that of the nonpretreated ones. As expected, the DOX-loaded micelles showed lower inhibition against 0.1 mM of buthionine sulfoximine (BSO) pretreated Hela cells. These reduction-responsive and biodegradable micelles show a potential to improve the antitumor efficacy of hydrophobic chemotherapeutic drugs.     

Synthesis and characterization of degradable multivalent cationic lipids with disulfide-bond spacers for gene delivery

Gene therapy provides powerful new approaches to curing a large variety of diseases, which are being explored in ongoing worldwide clinical trials. To overcome the limitations of viral gene delivery systems, synthetic nonviral vectors such as cationic liposomes (CLs) are desirable. However, improvements of their efficiency at reduced toxicity and a better understanding of their mechanism of action are required. We present the efficient synthesis of a series of degradable multivalent cationic lipids (CMVLn, n=2 to 5) containing a disulfide bond spacer between headgroup and lipophilic tails. This spacer is designed to be cleaved in the reducing milieu of the cytoplasm and thus decrease lipid toxicity. Small angle X-ray scattering demonstrates that the initially formed lamellar phase of CMVLn-DNA complexes completely disappears when reducing agents such as DTT or the biologically relevant reducing peptide glutathione are added to mimic the intracellular milieu. The CMVLs (n=3 to 5) exhibit reduced cytotoxicity and transfect mammalian cells with efficiencies comparable to those of highly efficient non-degradable analogs and benchmark commercial reagents such as Lipofectamine 2000. Thus, our results demonstrate that degradable disulfide spacers may be used to reduce the cytotoxicity of synthetic nonviral gene delivery carriers without compromising their transfection efficiency.     

Synthesis and characterization of poly (amino ester) for slow biodegradable gene delivery vector

Many therapeutic carrier materials were exploited for human gene therapy from viral to polymeric vectors. This research describes the evaluation of two biodegradable ester-bonded polymers synthesized by double-monomer polycondensation for a non-viral cationic polymer-based gene delivery system. The backbone was constructed to include inner tertiary amines and outer primary amines. Self-assembly with DNA resulted in the production of regularly nano-sized spherical polyplexes with good transfection efficiency, especially in the presence of serum. The polymers showed a relatively slow degradability for an amine-containing ester polymer, as they maintained DNA/polymer complex for 7 days in physiological buffer conditions. Finally, the low toxicity and slow degradation concluded these polymers reliable for long-term therapeutic applications.     

Synthesis and characterization of biodegradable cationic poly(propylene fumarate-co-ethylene glycol) copolymer hydrogels modified with agmatine for enhanced cell adhesion

We synthesized positively charged biodegradable hydrogels by cross-linking of agmatine-modified poly(ethylene glycol)-tethered fumarate (Agm-PEGF) and poly(propylene fumarate-co-ethylene glycol) (P(PF-co-EG)) to investigate the effect of the guanidino groups of the agmatine on hydrogel swelling behavior and smooth muscle cell adhesion to the hydrogels. The weight swelling ratio of these hydrogels at pH 7.0 increased from 279 +/- 4 to 306 +/- 7% as the initial Agm-PEGF content increased from 0 to 200 mg/g of P(PF-co-EG), respectively. The diffusional exponents, n, during the initial phase of water uptake were independent of the initial Agm-PEGF content and were determined to be 0.66 +/- 0.08, 0.71 +/- 0.07, and 0.60 +/- 0.05 for respective initial Agm-PEGF contents of 0, 100, and 200 mg/g. The heat of fusion of water present in the hydrogels increased from 214 +/- 11 to 254 +/- 4 J/g as the initial Agm-PEGF content increased from 0 to 200 mg/g. The number of adherent smooth muscle cells increased dose-dependently from 15 +/- 6 to 75 +/- 7% of the initial seeding density as the initial Agm-PEGF content increased from 0 to 200 mg/g. These results suggest that the incorporation of the guanidino groups of agmatine into P(PF-co-EG) hydrogels increases the hydrogel free water content and the total water content of the hydrogels and also enhances cell adhesion to the hydrogels.     

Synthesis of diether-linked cationic lipids for gene delivery.

Quaternary ammonium lipids 1b-d, with diether linkages between hydrocarbon chains and butane or hexane backbone, were synthesized for cationic liposome-mediated gene delivery. The synthetic strategy of using C-4 or C-6 synthon permits the achievement of the variation of the hydrophobic domain as well as changes of space between the quaternary ammonium head and the hydrophobic domain in the diether-linked cationic lipids.     

Synthesis of novel cholesterol-based cationic lipids for gene delivery

The new cholesterol-based cationic lipids B, C, and D with an ether linked spacer were synthesized by using aminopropyl chain extension with acrylonitrile. The cholesterol-based cationic lipid A with carbamoyl linkage were also synthesized in order to compare the difference in transfection efficiency of the two linkage types. To this end, GFP expression of these cationic lipids was confirmed respectively.     

Synthesis and in vitro evaluation of glutamide-containing cationic lipids for gene delivery

A novel series of cationic amphiphiles based on dialkyl glutamides with cationic pyridinium head group were synthesized as potential gene delivery agents. Four cationic lipids with glutamide as linker and varying chain lengths were tested for their transfection efficiency in three cell lines. The DNA-lipid complexes were characterized for their ability to bind to DNA, protection from nuclease digestion, size, zeta-potential, and toxicity. All four lipids demonstrated efficient transfection in MCF-7, COS, and HeLa cells, and the reporter gene expression was much higher with DOPE as the helper lipid in the formulation when compared to cholesterol. Among these 14-carbon lipids, lipid 2 has shown the highest transfection efficiency, complete protection of DNA from nuclease digestion, and low toxicity. Interestingly, lipid 2 has also shown remarkable enhancement in transfection in the presence of serum.     

Synthesis and characterization of folate-PEG-grafted-hyperbranched-PEI for tumor-targeted gene delivery

A great challenge for gene therapy is to develop a high efficient gene delivery system with low toxicity. Nonviral vectors are still attractive although the current agents displayed some disadvantages (i.e., low transfection efficiency, high toxicity). To overcome the high toxicity of poly(ethylene imine) (PEI) and low transfection efficiency of PEGylated PEI (PEG-PEI), we linked a cell specific target molecule folate (FA) on poly(ethylene glycol) (PEG) and then grafted the FA-PEG onto hyperbranched PEI 25 kDa. The FA-PEG- grafted-hyperbranched-PEI (FA-PEG-PEI) effectively condensed plasmid DNA (pDNA) into nanoparticles with positive surface charge under a suitable N/P ratio. Tested in deferent cell lines (i.e., HEK 293T, glioma C6 and hepatoma HepG2 cells), no significant cytotoxicity of FA-PEG-PEI was added to PEG-PEI. More importantly, significant transfection efficiency was exhibited in FA-targeted cells. Reporter assay showed that FA-PEG-PEI/pDNA complexes had significantly higher transgene activity than that of PEI/pDNA in folate-receptor (FR) positive (HEK 293T and C6) cells but not FR-negative (HepG2) cells. These results indicated that FA-PEG-PEI might be a promising candidate for gene delivery with the characteristics of good biocompatibility, potential biodegradability, and relatively high gene transfection efficiency.     

Cationic polydiacetylene micelles for gene delivery

Cationic surfactants easily interact with plasmid DNA to form small lipoplexes. However, their detergent behavior and associated biological toxicity limit their use as gene delivery vectors. We have incorporated a diacetylene motif in the hydrophobic chain of cationic surfactants. By using UV irradiation, the small cationic micelles (9 nm) obtained with diacetylenic detergents were photopolymerized into 40 nm spheres. Electrostatic interactions with plasmid DNA led to the formation of 45 nm lipoplexes at N/P = 5 ratio. In vitro transfection of the pCMV-Luciferase plasmid resulted in gene expression (>10(10) RLU/mg protein) at the same ratio, comparable with the commercially available JetSi-ENDO gene delivery system. This new and versatile class of molecules could lead to a new generation of in vivo gene delivery vectors.     

Synthesis and in vitro characterization of an ABC triblock copolymer for siRNA delivery

The ability to specifically down-regulate gene expression using the RNAi pathway in mammalian cells has tremendous potential in therapy and in basic science. However, delivery systems capable of efficient and biocompatible delivery of siRNA to target cells are not yet satisfactory. Here, we report the synthesis and in vitro characterization of ABC triblock copolymers that self-assemble with siRNA based on electrostatics and with each other by hydrophobic interactions. The ABC triblock copolymer is based on poly(ethylene glycol) (PEG), poly(propylene sulfide) (PPS), and a positively charged peptide (PEG-PPS-peptide). The diblock copolymer PEG(45)-PPS(5,10) was synthesized using anionic polymerization of propylene sulfide upon a PEG macroinitiator, and the peptide domain was coupled to the PPS terminus using a disulfide exchange reaction with an N-terminal cysteine residue on the peptide. The peptides were designed to interact electrostatically with siRNA, selecting the TAT peptide domain of HIV (RKKRRQRRR) and an oligolysine (Lys(9)). The resulting triblock copolymers were able to self-assemble with siRNA as demonstrated by dynamic light scattering and gel electrophoresis. Complex size was found to be dependent on the amount of polymer used (charge ratio) and the length of the hydrophobic PPS block, achieving sizes ranging from 171 nm to 601 nm. Cell internalization and gene expression down-regulation studies showed that the triblock copolymers are able to transport siRNA inside the cell and mediate gene expression down-regulation, with the amount of internalization and gene transfer affected by charge ratio, PPS length, and the presence of serum. The proposed triblock was able to mediate gene expression down-regulation of GAPDH, achieving up to 90.5% +/- 0.02% down-regulation.     

Novel stimuli-responsive micelle self-assembled from Y-shaped P(UA-Y-NIPAAm) copolymer for drug delivery

A new amphiphilic Y-shaped copolymer, comprised of hydrophobic poly(undecylenic acid) (PUA) and hydrophilic poly(N-isopropylacrylamide) (PNIPAAm), was designed and synthesized. A cytotoxicity study revealed that P(UA-Y-NIPAAm) copolymers did not exhibit apparent inhibition impact on the proliferation of cells when the concentration of the copolymer was below 1000 mg/L. Characterization demonstrated that the P(UA-Y-NIPAAm) copolymer is thermosensitive with a lower critical solution temperature (LCST) of 31 degrees C. In water, the P(UA-Y-NIPAAm) copolymer would self-assemble into micelles with a critical micelle concentration (CMC) of 20 mg/L. Self-assembled P(UA-Y-NIPAAm) micelles exhibited a nanospherical morphology of 40 to approximately 80 nm in size. The controlled drug release behavior of the P(UA-Y-NIPAAm) micelles was further investigated, and self-assembled micelles exhibited improved properties in controlled drug release.     

Synthesis and characterization of thermosensitive graft copolymer of N-isopropylacrylamide with biodegradable carboxymethylchitosan

A novel thermosensitive and hydrogel was designed and synthesized by graft copolymerization of N-isopropylacrylamide (NIPAAm) with biodegradable carboxymethylchitosan (CMCS). The influence of the content of CMCS grafted on the properties of the resulted hydrogels was examined. The morphology of the hydrogels was observed by scanning electron microscopy (SEM), their thermal property was characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and deswelling/swelling kinetics upon external temperature changes. In comparison with the conventional PNIPAAm hydrogels, the resulted hydrogels have improved thermosensitive properties, including enlarged water content at room temperature and faster deswelling/swelling rate upon heating. The strategy described here presents a potential alternative to the traditional synthesis techniques for thermosensitive hydrogels.     

Synthesis and biological activity of carbamate-linked cationic lipids for gene delivery in vitro

We have introduced a convenient synthesis method for carbamate-linked cationic lipids. Two cationic lipids N-[1-(2,3-didodecylcarbamoyloxy)propyl]-N,N,N-trimethylammonium iodide (DDCTMA) and N-[1-(2,3-didodecyl carbamoyloxy)propyl]-N-ethyl-N,N-dimethylammonium iodide (DDCEDMA), with identical length of hydrocarbon chains, alternative quaternary ammonium heads, carbamate linkages between hydrocarbon chains and quaternary ammonium heads, were synthesized for liposome-mediated gene delivery. Liposomes composed of DDCEDMA and DOPE in 1:1 ratio exhibited a lower zeta potential as compared to those made of pure DDCEDMA alone, which influences their DNA-binding ability. pGFP-N2 plasmid was transferred by cationic liposomes formed from the above cationic lipids into Hela and Hep-2 cells, and the transfection efficiency of some of cationic liposomes was superior or parallel to that of two commercial transfection agents, Lipofectamine2000 and DOTAP. Combined with the results of the agarose gel electrophoresis and transfection experiment, the DNA-binding ability of cationic lipids was too strong to release DNA from complex in the transfection, which could lead to relative low transfection efficiency and high cytotoxicity.     

Synthesis and evaluation of vitamin D-based cationic lipids for gene delivery in vitro

A new panel of steroidal cationic lipids has been synthesized for gene delivery. Using commercially available vitamin D2 (calciferol) or vitamin D3 (cholecalciferol) as hydrophobic motifs and a variety of cationic head groups as binding sites for negatively charged phosphate groups in DNA, we demonstrated that the transfection activity of the synthetic vitamin D-based cationic lipids 1d, 2d formulated with dioleoylphosphatidylethanolamine (DOPE) as a co-lipid is comparable to that of 3-(-[N-N',N'-dimethylaminoethane)carbamoyl]cholesterol (DC-Chol). These synthetic lipids are effective in transfecting a variety of cell lines. These results suggest that vitamin D-based cationic lipids are useful transfection reagents for in vitro gene transfer studies.     

Carbamate-linked cationic lipids for gene delivery

Series of cationic lipids 1a-p, with variable length of hydrocarbon chains, alternative quaternary ammonium heads, carbamate linkages between hydrocarbon chains and quaternary ammonium heads, as well as different anion combined with them, were synthesized for liposome-mediated gene delivery. Two plasmid DNAs, pGL3-control and pGFP-N2, were transferred by cationic liposomes formed from the above cationic lipids into five mammalian cell lines, and the transfection efficiency of some of the cationic liposomes was superior or parallel to that of two commercial transfection agents, Lipofectamine2000 and Sofast.     

Synthesis of novel biodegradable cationic polymer: N,N-diethylethylenediamine polyurethane as a gene carrier

A new cationic polymer, N,N-diethylethylenediamine-polyurethane (DEDA-PU), bearing tertiary amines in the backbone and side chains, was synthesized and used as a nonviral vector for gene delivery. The DEDA-PU readily self-assembled with the plasmid DNA (pCMV-betagal) in water and buffer at physiological pH, as determined by agarose gel retardation, dynamic light scattering, zeta potential, atomic force microscopy (AFM), and restriction endonuclease protection assays. The results revealed that DEDA-PU was able to bind with plasmid DNA, yielding positively charged complexes with a size around 100 nm at a DEDA-PU/DNA ratio of 50/1 (w/w). The DEDA-PU/DNA complexes were able to transfect HEK 293 cells in vitro with an efficiency comparable to a well-known gene carrier [poly(2-dimethylaminoethyl methacrylate), PDMAEMA]. The cytotoxicity of DEDA-PU was substantially lower than PDMAEMA. The degradation studies indicated that DEDA-PU degrades hydrolytically in 20 mM HEPES buffer at pH 7.4 with a half-life of approximately 60 h. This study shows that DEDA-PU holds promise as biodegradable polycations for gene delivery and is interesting candidate for further study.     

Synthesis and characterization of a novel arginine-grafted dendritic block copolymer for gene delivery and study of its cellular uptake pathway leading to transfection

We synthesized a novel arginine-grafted dendritic block copolymer, R-PAMAM-PEG-PAMAM-R G5 (PPP5-R) for gene delivery systems. Its Mw was measured as 2.74 x 104 Da by MALDI-TOF, and approximately 36 arginine residues are found to be grafted to the polymer by 1H NMR. PPP5-R was able to form polyplexes with plasmid DNA, the average size of which was about 200 nm. Positive zeta-potential values (+22 to +28 mV) of PPP5-R polyplex indicate the formation of positively charged stable polyplex particles and suggest that large dendritic blocks with high positive charge may not be fully shielded by PEG chains even after PEG-coated complex formation. PPP5-R polyplex shows enhanced water solubility due to the polymer's PEG core and also shows low cytotoxicity, representing the potential for in vivo application. We identified the greatly enhanced transfection efficiency of PPP5-R in comparison with that of native PPP5 on various cell lines. Moreover, in view of the result of various cellular uptake inhibitor treatments during a transfection step, the cellular uptake of PPP5-R polyplex leading to effective transfection is thought to be not dependent on one exclusive pathway and to have the possibility of multiple pathways (caveolae-, clathrin-, and macropinocytosis-mediated pathways), contrary to the caveolae-dependent uptake of the PPP5 polyplex lacking arginine residues.     

Synthesis and characterization of a photo-cross-linked biodegradable elastomer

The synthesis and characterization of a photocurable biodegradable elastomer as a potential biomaterial for the delivery of thermosensitive drugs are described. The elastomer was prepared from UV initiated cross-linking of an acrylated star-poly(epsilon-caprolactone-co-D,L-lactide) prepolymer. The influence of the molecular weight of the acrylated prepolymer on the final elastomer mechanical and thermal properties was determined. The glass-transition temperature of the elastomers was independent of the prepolymer molecular weight and was from -6 to -8 degrees C. The Young's modulus and stress at break of the elastomers was proportional to the inverse of the prepolymer molecular weight, while the strain at break increased in a linear fashion with the prepolymer molecular weight. Over a degradation period of 12 weeks in phosphate buffered saline, the elastomers exhibited little mass loss, appreciable mechanical strength loss, and little dimensional or strain at break change.