Use of magnetic poly(glycidyl methacrylate) monosize beads for the purification of lysozyme in batch system

The hydrophobic affinity ligand L-tryptophan immobilized magnetic poly(glycidyl methacrylate) [m-poly(GMA)] beads in monosize form (1.6 microm in diameter) were used for the affinity purification of lysozyme from chicken egg white. The m-poly(GMA) beads were prepared by dispersion polymerization in the presence of Fe3O4 nano-powder. The epoxy groups of the m-poly(GMA) beads were converted into amino groups with 1,6 diaminohexane (i.e., spacer arm). l-tryptophan was then covalently immobilized on spacer arm attached m-poly(GMA) beads. Elemental analysis of immobilised L-tryptophan for nitrogen was estimated as 42.5 micromol/g polymer. Adsorption studies were performed under different conditions in a batch system (i.e., medium pH, protein concentration and temperature). Maximum lysozyme adsorption amount of m-poly(GMA) and m-poly(GMA)-L-tryptophan beads were 1.78 and 259.6 mg/g, respectively. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium adsorption capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. It was observed that after 10 adsorption-elution cycle, m-poly(GMA)-L-tryptophan beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. It was found to be successful in achieving purification of lysozyme in a high yield of 76% with a purification fold of 71 in a single step. The specific activity of the eluted lysozyme (62,580 U/mg) was higher than that obtained with a commercially available pure lysozyme (Sigma (60,000 U/mg).     

Application of immobilized heparins for isolation of human antithrombin III

Immobilized heparins were prepared by six different methods, and these were utilized for affinity purification of human antithrombin III (AT-III). Affinity support capacities (mg AT-III/g support) were strongly influenced by immobilized active heparin concentrations. In the temperature range 5-37 degrees C, colder temperatures favored affinity adsorption of AT-III as well as nonspecific interactions of all proteins. For representative human-plasma-derived feed solutions the selectivity for AT-III on the affinity support was dependent on relative concentrations of non-AT-III proteins as well as the specific mode of adsorption and elution (batch/continuous).     

Affinity membrane chromatography: relationship of dye-ligand type to surface polarity and their effect on lysozyme separation and purification

Two different dye-ligands, i.e. Procion Brown MX-5BR (RB-10) and Procion Green H-4G (RG-5) were immobilised onto poly(2-hydroxyethylmethacrylate) (pHEMA) membranes. The polarities of the affinity membranes were determined by contact angle measurements. Separation and purification of lysozyme from solution and egg white were investigated. The adsorption data was analysed using two adsorption kinetic models the first order and the second order to determine the best-fit equation for the separation of lysozyme using affinity membranes. The second-order equation for the adsorption of lysozyme on the RB-10 and RG-5 immobilised membranes systems is the most appropriate equation to predict the adsorption capacity for the affinity membranes. The reversible lysozyme adsorption on the RB-10 and RG-5 did not follow the Langmuir model, but obeyed the Temkin and Freundlich isotherm model. Separation and purification were monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purities of the eluted lysozyme, as determined by HPLC, were 76 and 92% with recovery 63 and 77% for RB-10 and RG-5 membranes, respectively. For the separation and purification of lysozyme the RG-5 immobilised membrane provided the best results. The affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated adsorption-elution cycles.     

Protein interactions with surface-immobilized metal ions: structure-dependent variations in affinity and binding capacity with temperature and urea concentration.

We have used equilibrium binding analyses to evaluate the influence of temperature and urea on the affinity of hen egg white lysozyme and bovine pancreatic ribonuclease A for surface-immobilized Cu(II) ions. Linear Scatchard plots suggested that these model proteins were interacting with immobilized metal ions via a single class of intermediate-affinity (Kd = 10-40 microM) binding sites. Alterations in temperature had little or no effect on the immobilized Cu(II) binding capacity of either protein. Temperature effects on the interaction affinity, however, were protein-dependent and varied considerably. The affinity of lysozyme for immobilized Cu(II) ions was significantly decreased with increased temperature (0 degree C-37 degrees C), yet the affinity of ribonuclease did not vary measurably over the same temperature range. The van 't Hoff plot (1n K vs 1/T) for lysozyme suggests a straight line relationship (single mechanism) with a delta H of approximately -5.5 kcal/mol. Urea effects also varied in a protein-dependent manner. A 10-fold reduction in the affinity of lysozyme for the immobilized Cu(II) was observed with the urea concentrations up to 3 M; yet urea had no effect on the affinity of ribonuclease for the immobilized metal ions. Although the interaction capacity of lysozyme with the immobilized Cu(II) ions was decreased by 50% in 3 M urea, ribonuclease interaction capacity was not diminished in urea. Thus, temperature- and urea-dependent alterations in protein-metal ion interactions were observed for lysozyme but not ribonuclease A. The complete, yet reversible, inhibition of lysozyme- and ribonuclease-metal ion interactions by carboxyethylation with low concentrations of diethylpyrocarbonate provided direct evidence of histidyl involvement. The differential response of these proteins to the effects of temperature and urea was, therefore, interpreted based on calculated solvent-accessibilities and surface distributions of His residues, individual His residue pKa values, and specific features of the protein surface structure in the immediate environment of the surface-exposed histidyl residues. Possible interaction mechanisms involved in protein recognition of macromolecular surface-immobilized metal ions are presented.     

Protein A immobilized affinity cartridge for immunoglobulin purification

Recombinant Protein A was immobilized on a cellulose and acrylic composite matrix through Schiff base formation. Various factors that could affect the binding of immunoglobulin by the Protein A molecules immobilized on the solid matrix were studied to achieve optimum affinity purification. The spacer arm length and ligand concentration of Protein A were verified as factors crucial to optimized IgG purification. Liquid-phase environmental conditions such as pH and salt concentration also play important roles in adsorption capacity by affecting the molecular interaction between IgG and the immobilized Protein A. The rate of interaction between Protein A and IgG is rather fast, with minimal differences observed at 10-fold increases in the cartridge loading rate. This paper describes a cellulose/acrylic composite matrix for immobilizing Protein A, at an optimized ligand concentration, installed on a spacer arm of adequate length, to purify immunoglobulins from animal plasma. The fast-flow property of the cartridge made from such a matrix and its simplicity in operation provide effective means for purifying immunoglobulins on a relatively large scale.     

Immobilized metal affinity chromatography of monoclonal immunoglobulin M against mutant amidase from Pseudomonas aeruginosa

The chromatographic behavior of monoclonal antibodies (MAbs) of immunoglobulin (Ig) M class against mutant (T103I) amidase from Pseudomonas aeruginosa was investigated on immobilized metal chelates. The effect of ligand concentration, the length of spacer arm, and the nature of metal ion were investigated in immobilized metal affinity chromatography (IMAC). The MAbs against mutant amidase adsorbed to Cu(II), Ni(II), Zn(II), Co(II), and Ca(II)-iminodiacetic acid (IDA) agarose columns. The increase in ligand concentration (epichlorohydrin: 30-60 and 1,4-butanediol-diglycidyl ether: 16-36) resulted in higher adsorption to IgM into immobilized metal chelates. The length of spacer arm was found to affect protein adsorption, as longer spacer arm (i.e., 1,4-butanediol-diglycidyl ether) increased protein adsorption of immobilized metal chelates. The adsorption of IgM onto immobilized metal chelates was pH dependent because an increase in the binding of IgM was observed as the pH varied from 6.0 to 8.0. The adsorption of IgM to immobilized metal chelates was the result of coordination of histidine residues to metal chelates that are available in the third constant domain of heavy chain (CH3) of immunoglobulins, as the presence of imidazole (5 mM) in the equilibration buffer abolished the adsorption of IgM to the column. The combination of tailor-made stationary phases for IMAC and a correct design of the adsorption parameters permitted to devise a one-step purification procedure for IgM. Culture supernatants containing IgM against mutant amidase (T103I) were purified either by IMAC on EPI-60-IDA-Co (II) column or by gel filtration chromatography on Sephacryl S-300HR. The specific content of IgM and final recovery of antibody activity exhibited similar values for both purification schemes. The purified preparations of IgM obtained by both schemes were apparently homogeneous on native polyacrylamide gel electrophoresis with a Mr of 851,000 Da. The results presented in this work strongly suggest that one-step purification of IgM by IMAC is a cost-effective and processcompatible alternative to other types of chromatography.     

Immobilized metal affinity chromatography of monoclonal immunoglobulin M against mutant amidase from Pseudomonas aeruginosa

The chromatographic behavior of monoclonal antibodies (MAbs) of immunoglobulin (Ig) M class against mutant (T103I) amidase from Pseudomonas aeruginosa was investigated on immobilized metal chelates. The effect of ligand concentration, the length of spacer arm, and the nature of metal ion were investigated in immobilized metal affinity chromatography (IMAC). The MAbs against mutant amidase adsorbed to Cu(II), Ni(II), Zn(II), Co(II), and Ca(II)-iminodiacetic acid (IDA) agarose columns. The increase in ligand concentration (epichlorohydrin: 30–60 and 1,4-butanediol-diglycidyl ether: 16–36) resulted in higher adsorption to IgM into immobilized metal chelates. The length of spacer arm was found to affect protein adsorption, as longer spacer arm (i.e., 1,4-butanediol-diglycidyl ether) increased protein adsorption of immobilized metal chelates. The adsorption of IgM onto immobilized metal chelates was pH dependent because an increase in the binding of IgM was observed as the pH varied from 6.0 to 8.0. The adsorption of IgM to immobilized metal chelates was the result of coordination of histidine residues to metal chelates that are available in the third constant domain of heavy chain (CH3) of immunoglobulins, as the presence of imidazole (5 mM) in the equilibration buffer abolished the adsorption of IgM to the column. The combination of tailor-made stationary phases for IMAC and a correct design of the adsorption parameters permitted to devise a one-step purification procedure for IgM. Culture supernatants containing IgM against mutant amidase (T103I) were purified either by IMAC on EPI-60-IDA-Co (II) column or by gel filtration chromatography on Sephacryl S-300HR. The specific content of IgM and final recovery of antibody activity exhibited similar values for both purification schemes. The purified preparations of IgM obtained by both schemes were apparently homogeneous on native polyacrylamide gel electrophoresis with a M _r of 851,000 Da. The results presented in this work strongly suggest that one-step purification of IgM by IMAC is a cost-effective and process-compatible alternative to other types of chromatography.     

Evaluation of IDA-PEVA hollow fiber membrane metal ion affinity chromatography for purification of a histidine-tagged human proinsulin

Inabilities to process particulate material and to allow the use of high flow rates are limitations of conventional chromatography. Membranes have been suggested as matrix for affinity separation due to advantages such as allowing high flow rates and low-pressure drops. This work evaluated the feasibility of using an iminodiacetic acid linked poly(ethylenevinyl alcohol) membrane in the immobilized metal ion affinity chromatography (IMAC) purification of a human proinsulin(His)(6) of an industrial insulin production process. The screening of metal ions showed Ni(2+) as metal with higher selectivity and capacity among the Cu(2+), Ni(2+), Zn(2+) and Co(2+). The membrane showed to be equivalent to conventional chelating beads in terms of selectivity and had a lower capacity (3.68 mg/g versus 12.26 mg/g). The dynamic adsorption capacity for human proinsulin(His)(6) was unaffected by the mode of operation (dead-end and cross-flow filtration).     

Preparation and characterisation of surfaces properties of poly(hydroxyethylmethacrylate-co-methacrylolyamido-histidine) membranes: application for purification of human immunoglobulin G

In this study, an affinity membrane containing L-histidine as an amino acid ligand was used in separation and purification of human immunoglobulin G (HIgG) from solution and human serum. The polarities and the surface free energies of the affinity membranes were determined by contact angle measurements. HIgG adsorption and purification onto the affinity membranes from aqueous solution and human serum were investigated in a batch and a continuous system. Effect of different system parameters such as ligand density, adsorbent dosage, pH, temperature, ionic strength and HIgG initial concentration on HIgG adsorption were investigated. The maximum adsorption capacity of p(HEMA-MAAH-4) membranes for HIgG was 13.06 mgml(-1). The reversible HIgG adsorption on the affinity membrane obeyed both the Langmuir and Freundlich isotherm models. The adsorption data was analysed using the first- and second-order kinetic model and the experimental data was well described by the first-order equations. In the continuous system, the purity of the eluted HIgG, as determined by HPLC, was 93% with recovery 58% for p(HEMA-MAAH-4) membrane. The affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated adsorption-elution cycles.     

Interactions of proteins with immobilized metal ions: a comparative analysis using various isotherm models

Immobilized metal ion affinity chromatography (IMAC) is now a widely accepted technique for the purification of natural and recombinant therapeutic products and is beginning to find industrial applications. The design, optimization, and scale-up of a chromatographic process using IMAC demands a thorough understanding to be developed regarding the fundamental factors governing the various interactions between immobilized metal ions and proteins. Consequently, there is an immediate need to find out a theory that is able to account for these interactions most efficiently in a qualitative as well as a quantitative manner. In view of this requirement, the interactions of several model proteins (lysozyme, ovalbumin, bovine serum albumin, conalbumin, and wheat germ agglutinin) with metal (Cu(II), Ni(II))-chelated IDA (iminodiacetate) and tris(2-aminoethyl)amine were investigated. The adsorption data were analyzed using four isotherm models, viz., the general affinity interaction theory/Langmuir model, the Freundlich model, the Temkin model, and the Langmuir-Freundlich model, and the sorption parameters were computed. Although the first three models were applicable to some protein-IMA-M(II) systems, the Langmuir-Freundlich model appeared to be the most efficient model for explaining the interactions of proteins with IMA-M(II) gels. Also, this model was able to explain cooperativity and binding heterogeneity in quantitative terms. It is envisaged that this analysis would be useful in developing an improved understanding of protein-immobilized metal ion interactions and providing guidelines for designing preparative-scale separations using IMAC.     

Affinity adsorption of lysozyme on a macroligand prepared with Cibacron Blue 3GA attached to yeast cells

The objective of this study was the development of affinity adsorbent particles with the appropriate characteristics to be applied in protein purification using the affinity ultrafiltration method. To prepare affinity macroligands Cibacron Blue 3GA, as a ligand molecule, was immobilized by covalent bonding onto yeast cell walls, the support material or matrix. The maximum attachment of the ligand to the matrix was 212 μmol/g (ligand dry weight/yeast dry weight). Lysozyme was selected as the protein model for the adsorption studies. Its adsorption onto the matrix without ligand and matrix with attached ligand were investigated batch-wise. The adsorption equilibrium isotherms appeared to follow a typical Langmuir isotherm. The maximum adsorption capacity (q(m)) of the Cell-Cibacron macroligand for lysozyme was 110 mg/ml of wet macroligand. The adsorbent was also employed for the separation of lysozyme from hen egg white. High purity lysozyme was obtained.     

Negative purification method for the selection of specific antibodies from polyclonal antisera

We developed a protocol to remove non-specific antibodies from polyclonal antisera by adsorption on non-target antigens immobilized on nitrocellulose membranes. This "negative" purification method is simple and provides better immunoreagents than the blocking of nonspecific antibodies in solution or the enrichment of specific antibodies on nitrocellulose membranes. For routine applications, this method is quicker and cheaper than the purification protocols based on selective precipitations and affinity chromatography.     

Purification of histidine-tagged single-chain Fv-antibody fragments by metal chelate affinity precipitation using thermoresponsive copolymers

Metal chelate affinity precipitation (MCAP) has been successfully developed as a simple purification process for proteins that have affinity for metal ions. The present lack of widespread applications for this technique as compared to immobilized metal affinity chromatography (IMAC) may be related to the scarcity of well-characterized metal affinity macroligands (AML) and their applications to the number of different purification systems. In the present work we describe a detailed study of a new purification system using metal-loaded thermoresponsive copolymers as AML. The copolymers of vinylimidazole (VI) with N-isopropylacrylamide (NIPAM) were synthesized by radical polymerization with imidazole contents of 15 and 24 mol%. When loaded with Cu(II) and Ni(II) ions the copolymers selectively precipitated extracellularly expressed histidine-tagged single-chain Fv-antibody fragments (His(6)-scFv fragments) from the fermentation broth free from E. coli cells. Precipitation was induced by salt at mild temperatures and the bound antibody fragments were recovered by dissolving the protein-polymer complex in EDTA buffer and subsequent reprecipitation of the polymer. His(6)-scFv fragments were purified with yields of 91 and 80% and purification folds of 16 and 21 when Cu(II) and Ni(II) copolymers were used, respectively. The protein precipitation capacity of the Ni(II) copolymer showed a dependence on the VI concentration in the copolymer. The SDS-PAGE pattern showed significant purification of the antibody fragments.     

Polymerized liposome as ligand carrier for affinity precipitation of proteins

A polymerized liposome (PLS) was prepared using a synthesized phospholipid with a diacetylene moiety in the hydrophobic chain and an amino group in the hydrophilic head. The PLS was used as a novel ligand carrier for affinity precipitation of proteins because it showed a reversibly precipitable property on salt addition and removal. Soybean trypsin inhibitor (STI) was easily immobilized on the PLS by a one-step carbodiimide reaction. The PLS showed no nonspecific adsoprtion of proteins. It had a large ligand coupling capacity, and then a large adsorption capacity for trypsin after STI immobilization. The PLS with immpbilized STI was recycled three times for the purification of trypsin from a crude pancreatic extract. Although the degree of purification was compromised by the impurity of the STI employed, in each run the purification factor reached about 6 and more than 80% of trypsin activity was recovered. The results indicated that the PLS was a potential ligand carrier for affinity precipitation of proteins. (c) 1995 John Wiley & Sons, Inc.     

Production of polygalacturonase from <Emphasis Type="Italic">Coriolus versicolor</Emphasis> grown on tomato pomace and its chromatographic behaviour on immobilized metal chelates

Tomato pomace and pectin were used as the sole carbon sources for the production of polygalacturonase from a strain of Coriolus versicolor in submerged culture. The culture of C. versicolor grown on tomato pomace exhibited a peak of polygalacturonase activity (1,427 U/l) on the third day of culture with a specific activity of 14.5 U/mg protein. The production of polygalacturonase by C. versicolor grown on pectin as a sole carbon source increased with the time of cultivation, reaching a maximum activity of 3,207 U/l of fermentation broth with a specific activity of 248 U/mg protein. The levels of different isoenzymes of polygalacturonase produced during the culture growth were analysed by native PAGE. Differential chromatographic behaviour of lignocellulosic enzymes produced by C. versicolor (i.e. polygalacturonase, xylanase and laccase) was studied on immobilized metal chelates. The effect of ligand concentration, pH, the length of spacer arm and the nature of metal ion were studied for enzyme adsorption on immobilized metal affinity chromatography (IMAC). The adsorption of these lignocellulosic enzymes onto immobilized metal chelates was pH-dependent since an increase in protein adsorption was observed as the pH was increased from 6.0 to 8.0. The adsorption of polygalacturonase as well as other enzymes to immobilized metal chelates was due to coordination of histidine residues which are available at the protein surface since the presence of imidazole in the equilibration buffer abolished the adsorption of the enzyme to immobilized metal chelates. A one-step purification of polygalacturonase from C. versicolor was devised by using a column of Sepharose 6B-EPI 30-IDA-Cu(II) and purified enzyme exhibited a specific activity of about 150 U/mg protein, final recovery of enzyme activity of 100% and a purification factor of about 10. The use of short spacer arm and the presence of imidazole in equilibration buffer exhibited a higher selectivity for purification of polygalacturonase on this column with a high purification factor. The purified enzyme preparation was analysed by SDS-PAGE as well as by "in situ" detection of enzyme activity.     

A kinetic locking-on strategy for bioaffinity purification: further studies with alcohol dehydrogenase

The kinetic locking-on strategy improves the selectivity of protein purification procedures based on immobilized cofactor derivatives through use of enzyme-specific substrate analogues in irrigants to promote biospecific adsorption. This paper describes the development and application of this strategy to the one-chromatographic step affinity purification of NAD(P)+-dependent alcohol dehydrogenases using 8'-azo-linked immobilized NAD(P)+, S6-linked and N6-linked immobilized NAD+, and N6-linked immobilized NADP+ derivatives. These studies were carried out using alcohol dehydrogenases from Saccharomyces cerevisiae (YADH, EC 1.1.1.1), equine liver (HLADH, EC 1.1.1.1), and Thermoanaerobium brockii (TBADH, EC 1.1.1.2). The results reveal that the factors which require careful consideration before development of a truly biospecific system based on the locking-on strategy include: (i) the stability of the immobilized cofactor derivative; (ii) the spacer-arm composition of the affinity derivative; (iii) the accessible immobilized cofactor concentration; (iv) the soluble locking-on ligand concentration; (v) the dissociation constant of locking-on ligand, and (vi) the identification and elimination of nonbiospecific interference. The S6-linked immobilized NAD+ derivative (synthesized with a hydrophilic spacer arm) proved to be the most suitable of the affinity adsorbents investigated in the present study for use with the locking-on strategy. This conclusion was based primarily on the observations that this affinity adsorbent was stable, retained cofactor activity with the "test" enzymes under study, and was not prone to nonbiospecific interactions. Using this immobilized derivative in conjunction with the locking-on strategy, alcohol dehydrogenase from Saccharomyces cerevisiae was purified to electrophoretic homogeneity in a single affinity chromatographic step.     

Affinity dye–ligand poly(hydroxyethyl methacrylate)/chitosan composite membrane for adsorption lysozyme and kinetic properties

A composite membrane from 2-hydroxyethyl methacrylate (HEMA) and poly(hydroxyethyl methacrylate)/chitosan (pHEMA/chitosan) was synthesized via UV initiated photo-polymerization in the presence of an initiator α,α′-azoisobutyronitrile (AIBN). Procion Brown MX 5BR was then covalently immobilized onto composite membrane as a dye–ligand. The binding characteristics of a model protein (i.e. lysozyme) to the dye–ligand immobilized affinity membrane have been investigated from aqueous solution using the plain composite membrane as a control system. The experimental data was analyzed using two adsorption kinetic models, the pseudo-first-order and the pseudo-second-order, to determine the best-fit equation for the adsorption of lysozyme onto affinity composite membrane. The second-order equation for the adsorption of lysozyme on the dye–ligand membrane systems is the most appropriate equation to predict the adsorption capacity for the affinity membrane. The reversible lysozyme adsorption on the affinity membrane obeyed the Freundlich isotherm. The lysozyme adsorption capacity of the plain membrane and the dye–ligand affinity membrane were 8.3 and 121.5 mg ml⁻¹, respectively.     

Exploiting immobilized metal affinity membranes for the isolation or purification of therapeutically relevant species

Increasing reports regarding the isolation or purification of biospecies for therapeutic purpose using the immobilized metal affinity chromatography have been presented in recent years. At the same time, membrane chromatography technique has also gained more and more attention for their advantage in speeding the separation process. The immobilized metal affinity membrane technique developed by combining these two techniques may provide an alternative potential tool for separating the therapeutically relevant biospecies. In this review paper, the features of the immobilized metal affinity membranes are discussed and concentrated on three subtopics: membrane matrices, immobilized metal affinity method, and membrane module designs. Several examples of practically applying the immobilized metal affinity membranes on the purification of potential therapeutics reported in the literature are subsequently presented. Lastly, this review also provides an overall evaluation on the possible advantages and problems existing in this technique to point out opportunities and further improvements for more applied development of the immobilized metal affinity membranes.     

Screening of suitable immobilized metal chelates for adsorption of monoclonal antibodies against mutant amidase from Pseudomonas aeruginosa

The chromatographic behaviour of monoclonal antibodies (MAbs) of IgM class against mutant (T103I) amidase from Pseudomonas aeruginosa was investigated. The effect of ligand concentration, the length of spacer arm and the nature of metal ion were investigated on immobilized metal ion affinity chromatography (IMAC). MAbs against mutant amidase adsorbed to Cu (II), Ni (II), Zn (II), Co (II) and Ca (II)-IDA agarose columns. The adsorption of MAbs onto immobilized metal chelates was pH dependent because an increase in the binding of MAbs was observed as the pH was raised from 6.0 to 8.0. The adsorption of MAbs to metal chelates was due to coordination of histidine residues which are available in the 3rd constant domain of heavy chain (CH3) of immunoglobulins since the presence of imidazole in the equilibration buffer abolished the adsorption of MAbs to the column packed with commercial IDA-Zn(II) agarose at pH 8.0. The combination of tailor-made stationary phases for IMAC and a correct choice of the adsorption conditions permitted to design a one-step purification procedure for MAbs of IgM class. Culture supernatants containing MAbs of IgM class against mutant amidase (T103I) were chromatographed by IMAC Co (II) column at pH 8.0. The results strongly suggest that one-step purification of MAbs of IgM class by IMAC is a cost-effective and process-compatible alternative to the other purification procedures.     

Protein fractionation using fast flow immobilized metal chelate affinity membranes

A new group-specific affinity membrane using metal chelates as ligands and inorganic glass hollow fiber microfiltration membranes as support matrices is developed and tested. The study focused on developing the optimum activation and coupling procedures to bind the chelating agent (iminodiacetic acid, IDA) to the surface of the microporous glass hollow fiber membrane and testing the resultant affinity membrane. Starting with three different glass surfaces, five modification reactions were evaluated. All the modified "active surfaces" were first tested for their protein adsorptive properties in batch mode with suspended microporous glass grains using model proteins with known binding characteristics with Cu-IDA systems. The metal loading capacities of the surfaces exhibiting favorable fractionation were then measured by atomic absorption spectroscopy.The results were compared with the results obtained with a commercial material used in immobilized metal affinity column chromatography. The protein binding characteristics of the hollow fiber affinity membranes were also evaluated under conditions of convective flow. This was performed by flowing single solute protein solutions through the microporous membrane at different flow rates. These results were then used to estimate the optimum loading and elution times for the process. A mathematical model incorporating radial diffusion was solved using a finite difference discretization method. Comparison between model predictions and experimental results was performed for four different proteins at one flow rate. These results suggested that the kinetics of adsorption was concentration dependent. Finally, the hollow fiber affinity membranes were challenged with two component mixtures to test their ability to fractionate mixed protein solutions. Efficient separation and good purity were obtained.The results presented here represent the development of a new fast flow affinity membrane process-immobilized metal affinity membranes (IMAM). (c) 1994 John Wiley & Sons, Inc.