An alternative use of basic pGEX vectors for producing both N- and C-terminal fusion proteins for production and affinity purification of antibodies

Glutathione S-transferase (GST) fusion proteins are widely used in protein production for pure immunogens, protein-protein, and DNA-protein interaction studies. Using basic pGEX vectors, foreign DNA is introduced to the C-terminus of the GST gene and the produced fusion proteins are C-terminally orientated. However, because the orientation of foreign polypeptides may have a very important role in the correct folding of the produced polypeptides, N-terminal fusion proteins are needed to express especially the N-terminus of the foreign polypeptide. Here, we introduce a novel use of the basic pGEX vectors for the production of N-terminal fusion proteins. In this procedure, PCR generated DNA fragments were cloned into the N-terminus of the GST gene in a unique EcoNI site located down-stream of the ATG initiation codon. The N-terminal fusion proteins were expressed in high quantities, easily solubilized, and affinity purified using our modification of current purification protocols. We also introduce here a new modification of the affinity purification of antibodies using covalently crosslinked GST and fusion proteins to glutathione-agarose beads. Our procedure was tested successfully for producing antibodies against both N- and C-terminus of the luteinizing hormone/chorionic gonadotropin receptor.     

Rapid purification and crystal structure analysis of a small protein carrying two terminal affinity tags

Small peptide tags are often fused to proteins to allow their affinity purification in high-throughput structure analysis schemes. To assess the compatibility of small peptide tags with protein crystallization and to examine if the tags alter the three-dimensional structure, the N-terminus of the chicken alpha-spectrin SH3 domain was labeled with a His6 tag and the C-terminus with a StrepII tag. The resulting protein, His6-SH3-StrepII, consists of 83 amino-acid residues, 23 of which originate from the tags. His6-SH3-StrepII is readily purified by dual affinity chromatography, has very similar biophysical characteristics as the untagged protein domain and crystallizes readily from a number of sparse-matrix screen conditions. The crystal structure analysis at 2.3 A resolution proves native-like structure of His6-SH3-StrepII and shows the entire His6 tag and part of the StrepII tag to be disordered in the crystal. Obviously, the fused affinity tags did not interfere with crystallization and structure analysis and did not change the protein structure. From the extreme case of His6-SH3-StrepII, where affinity tags represent 27% of the total fusion protein mass, we extrapolate that protein constructs with N- and C-terminal peptide tags may lend themselves to biophysical and structural investigations in high-throughput regimes.     

大肠杆菌YggG与结合蛋白Era的相互作用研究

Era是细菌生长必须的一高度保守的GTPase。yggG是从大肠杆菌全基因组文库中钓取并克隆的Era结合蛋白基因,进一步的研究表明该基因在大肠杆菌中的表达与环境应激相关,提示yggG基因产物参与细菌的应激调控。为了阐明YggG蛋白与Era蛋白间的相互关系,利用所构建的双启动子表达载体pDH2-YggG-Ptac-Era在同一细胞中同时表达YggG与Era蛋白,并通过免疫共沉淀实验检测细菌裂解产物YggG与Era蛋白间的相互作用;在此基础上,构建并表达纯化了GST融合的Era蛋白氨基端截短肽和Era羧基端截短肽,通过GST Pull-down检测了Era不同功能区域与YggG蛋白间的相互作用。结果显示, Era/YggG 复合物仅存在于同时过表达Era和YggG蛋白的细菌细胞内,不诱导Era或者不诱导YggG蛋白过表达,均检测不到Era/YggG 复合物存在;纯化的GST不能Pull-down YggG蛋白,而纯化的GST融合的Era蛋白、Era氨基端截短肽及Era羧基端截短肽均可以Pull-down YggG蛋白;GST融合Era氨基端截短肽和GST融合的Era蛋白对YggG蛋白结合作用明显高于GST融合的Era蛋白羧基端截短肽。上述结果说明,YggG是一大肠杆菌Era结合蛋白,YggG与Era的氨基端和羧基端的结合活性存在差异。     

Human glutaredoxin 2 affinity tag for recombinant peptide and protein purification

Recombinant proteins are commonly expressed in fusion with an affinity tag to facilitate purification. We have in the present study evaluated the possible use of the human glutaredoxin 2 (Grx2) as an affinity tag for purification of heterologous proteins. Grx2 is a glutathione binding protein and we have shown in the present study that the protein can be purified from crude bacterial extracts by a one-step affinity chromatography on glutathione-Sepharose. We further showed that short peptides could be fused to either the N- or C-terminus of Grx2 without affecting its ability to bind to the glutathione column. However, when Grx2 was fused to either the 27 kDa green fluorescent protein or the 116 kDa beta-galactosidase, the fusion proteins lost their ability to bind glutathione-Sepharose. Insertion of linker sequences between the Grx2 and the fusion protein did not restore binding to the column. In summary, our findings suggest that Grx2 may be used as an affinity tag for purification of short peptides and possibly also certain proteins that do not interfere with the binding to glutathione-Sepharose. However, the failure of purifying either green fluorescent protein or beta-galactosidase fused to Grx2 suggests that the use of Grx2 as an affinity tag for recombinant protein purification is limited.     

Recombinant human insulin. VIII. Isolation of fusion protein--S-sulfonate, biotechnological precursor of human insulin, from the biomass of transformed Escherichia coli cells

Various methods have been investigated for the isolation and purification of fusion proteins of precursors of human insulin in the form of S-sulfonates, from the biomass of transformed Escherichia coli cells. Fusion proteins were prepared with different sizes and structures of the leader peptide and the poly-His position (inserted for purification by metal chelate affinity chromatography). The fusion proteins contained an IgG-binding B domain of protein A from Staphylococcus aureus at the N-terminus and an Arg residue between the leader peptide of the molecule and the proinsulin sequence, for trypsin cleavage of the leader peptide. Six residues of Cys in proinsulin allow the chemical modification of the protein as a (Cys-S-SO(-)(3))(6) derivative (S-sulfonate), which increases its polyelectrolytic properties and improves the efficiency of its isolation. Various methods of oxidative sulfitolysis were compared with catalysis by sodium tetrathionate or cystine and Cu2+ or Ni2+ ions. An optimum scheme for the isolation and purification of S-sulfonated fusion proteins was developed by the combination of metal-chelating affinity and ion-exchange chromatography. Highly purified (95%) S-sulfonated fusion protein was recovered which was 85% of the fusion protein contained in the biomass of E. coli cells. Folding of fusion protein S-sulfonate occurred with high yield (up to 90-95%). We found that the fusion protein-S-sulfonate has proinsulin-like secondary structure.This structure causes highly efficient fusion protein folding.     

The construction of bifunctional fusion proteins consisting of MutS and GFP

MutS as a mismatch binding protein is a promising tool for SNP detection. Green fluorescent protein (GFP) is known as an excellent reporter domain. We constructed chimeric proteins consisting of MutS from Thermus thermophilus and GFPuv from Aequorea victoria by cloning the GFPuv gene into the plasmid vectors carrying the mutS gene. The GFPuv domain fused to the N-terminus of MutS (histag-GFP-MutS) exhibited the same level of green fluorescence as free GFPuv. To obtain the fluorescing histag-GFP-MutS protein the expression at 30 degrees C was required, while free GFPuv fluoresces when expressed both at 30 and 37 degrees C. The chimeric protein where the GFPuv domain was fused to the C-terminus of MutS exhibited much weaker green fluorescence (20-25% compared with those of histag-GFP-MutS or free GFPuv). The insertion of (ProGly)5 peptide linker between the MutS and GFP domains resulted in no significant improvement in GFP fluorescence. No shifts in the excitation and emission spectra have been observed for the GFP domain in the fusion proteins. The fusion proteins with GFP at the N- and C-terminus of MutS recognised DNA mismatches similarly like T. thermophilus MutS. The fluorescent proteins recognising DNA mismatches could be useful for SNP scanning or intracellular DNA analysis. The fusion proteins around 125 kDa were efficiently expressed in E. coli and purified in milligram amounts using metal chellate affinity chromatography.     

Protein Purification with C-Terminal Fusion of Maltose Binding Protein

For affinity-chromatography-based purification of proteins that are prone to abnormal termination of translation or that may not be modified at their N-termini, affinity tags are needed which can be fused to the C-terminus. In this publication we describe that maltose binding protein (MBP) fused to the C-terminus of the plant photoreceptor phytochrome B allows purification of the fusion protein via amylose affinity chromatography. After overexpression in yeast a 125-fold enrichment could be achieved. The spectral properties of phytochrome B were not impaired by the fusion and purification. These results demonstrate that not only the widely used N-terminal fusions of MBP but also C-terminal fusions can be employed for protein purification.     

Plasmid pGEX-5T: An alternative system for expression and purification of recombinant proteins

Summary A novel expression vector pGEX-5T was constructed which directs the synthesis of a fusion protein with a histidine-hexapeptide and glutathione-S-transferase at its N-terminus and the recombinant protein at its C-terminus inEscherichia coli. The designed fusion gene strategy allows the purification of soluble and insoluble recombinant proteins to homogeneity with single-step affinity chromatography using immobilized glutathione and metal chelating matrix, respectively. The principle and availability of this new expression system was respectively tested with the purification of a soluble and insoluble recombinant fusion protein containing 24 and 75 amino acids of the human thrombomodulin.     

Construction of a mini-intein fusion system to allow both direct monitoring of soluble protein expression and rapid purification of target proteins

Affinity purification of recombinant proteins has been facilitated by fusion to a modified protein splicing element (intein). The fusion protein expression can be further improved by fusion to a mini-intein, i.e. an intein that lacks an endonuclease domain. We synthesized three mini-inteins using overlapping oligonucleotides to incorporate Escherichia coli optimized codons and allow convenient insertion of an affinity tag between the intein (predicted) N- and C-terminal fragments. After examining the splicing and cleavage activities of the synthesized mini-inteins, we chose the mini-intein most efficient in thiol-induced N-terminal cleavage for constructing a novel intein fusion system. In this system, green fluorescent protein (GFP) was fused to the C-terminus of the affinity-tagged mini-intein whose N-terminus was fused to a target protein. The design of the system allowed easy monitoring of soluble fusion protein expression by following GFP fluorescence, and rapid purification of the target protein through the intein-mediated cleavage reaction. A total of 17 target proteins were tested in this intein-GFP fusion system. Our data demonstrated that the fluorescence of the induced cells could be used to measure soluble expression of the intein fusion proteins and efficient intein cleavage activity. The final yield of the target proteins exhibited a linear relationship with whole cell fluorescence. The intein-GFP system may provide a simple route for monitoring real time soluble protein expression, predicting final product yields, and screening the expression of a large number of recombinant proteins for rapid purification in high throughput applications.     

A novel fusion partner for enhanced secretion of recombinant proteins in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Expressing proteins with fusion partners improves yield and simplifies the purification process. We developed a novel fusion partner to improve the secretion of heterologous proteins that are otherwise poorly excreted in yeast. The VOA1 (YGR106C) gene of Saccharomyces cerevisiae encodes a subunit of vacuolar ATPase. We found that C-terminally truncated Voa1p was highly secreted into the culture medium, even when fused with rarely secreted heterologous proteins such as human interleukin-2 (hIL-2). Deletion mapping of C-terminally truncated Voa1p, identified a hydrophilic 28-amino acid peptide (HL peptide) that was responsible for the enhanced secretion of target protein. A purification tag and a protease cleavage site were added to use HL peptide as a multi-purpose fusion partner. The utility of this system was tested via the expression and purification of various heterologous proteins. In many cases, the yield of target proteins fused with the peptide was significantly increased, and fusion proteins could be directly purified with affinity chromatography. The fusion partner was removed by in vitro processing, and intact proteins were purified by re-application of samples to affinity chromatography.     

Differential effects of supplementary affinity tags on the solubility of MBP fusion proteins

It is difficult to imagine any strategy for high-throughput protein expression and purification that does not involve genetically engineered affinity tags. Because of its ability to enhance the solubility and promote the proper folding of its fusion partners, Escherichia coli maltose-binding protein (MBP) is a particularly useful affinity tag. However, not all MBP fusion proteins bind efficiently to amylose resin, and even when they do it is usually not possible to obtain a sample of adequate purity after a single affinity step. To address this problem, we endeavored to incorporate supplemental affinity tags within the framework of an MBP fusion protein. We show that both the nature of the supplemental tags and their location can influence the ability of MBP to promote the solubility of its fusion partners. The most promising configurations for high-throughput protein expression and purification appear to be a fusion protein with a biotin acceptor peptide (BAP) on the N-terminus of MBP and/or a hexahistidine tag (His-tag) on the C-terminus of the passenger protein. Abbreviatoins: BAP, biotin acceptor peptide; EDTA, ethelenediaminetetraacetic acid; IPTG, isopropyl--d-thiogalactopyranoside; MBP, E. coli maltose-binding protein; GFP; green fluorescent protein; Ni-NTA, nickel-nitrilotriacetic acid; ORF, open reading frame; PCR; polymerase chain reaction; R5, polyarginine tag; SDS-PAGE, sodium dodecyl sulfate-polyacrylamide gel electrophoresis; TEV, tobacco etch virus; WT, wild-type     

Recombinant proteins fused to thermostable partners can be purified by heat incubation

We developed a protocol for the fast purification of small proteins and peptides using heat incubation as the first purification step. The proteins are expressed from a new bacterial expression vector (pETM-90) fused to the C-terminus of thermostable Ftr from Methanopyrus kandleri. The vector further contains a 6xHis-tag to allow immobilised metal ion affinity purification and a TEV protease cleavage site to enable the removal of the His-tag and fusion partner. Heat incubation induces the specific denaturation and precipitation of the Escherichia coli proteins but not of the thermostable fusion protein. Using the fusion construct and the heat incubation protocol a number of fusion proteins were purified to near homogeneity. The thermostability was ensured when Ftr had a molecular weight higher than twice the target protein. The obtained purification yields were similar and, in some cases, even higher than the ones obtained by affinity purification with the same Ftr-fusion proteins or the same target proteins fused to other often used partners such as NusA, GST, or DsbA. The protocol does not depend on a specific thermostable protein as was shown by the exchange of Ftr for M. kandleri Mtd. Purification by heat incubation is a fast and inexpensive alternative to chromatographic techniques, particularly suitable for the production of antigenic sequences for which the loss of native structure is not detrimental. We proved that it can be easily automated.     

Genetically engineered obelin as a bioluminescent label in an assay for a peptide.

The marine polyp Obelia longissima produces a protein, obelin, which emits light in a calcium-dependent manner. This photoprotein consists of a stable complex of its apoprotein, a chromophore, and oxygen. In the presence of calcium ions, the protein undergoes a change in conformation that allows it to catalyze the oxidation of the chromophore, coelenterazine, to coelenteramide with the release of light and CO2. Photoproteins are attractive as labels in analytical applications because the bioluminescent signal that they produce is the result of a chemical reaction and, therefore, has virtually no background. Thus, bioluminescence allows for extremely sensitive detection. In that regard, the feasibility of using obelin as a label has been explored with the development of a competitive immunoassay for the determination of a small peptide analyte. To attach the obelin label in a controlled manner to the octapeptide, a fusion protein was produced using recombinant DNA techniques. The protein consisted of the C-terminus of the peptide fused to the N-terminus of obelin. The octapeptide-obelin fusion protein retained the bioluminescence properties of the native protein, and was subsequently used to generate dose-response curves for the free octapeptide.     

Utilizing the C-terminal cleavage activity of a protein splicing element to purify recombinant proteins in a single chromatographic step.

A conventional affinity protein purification system often requires a separate protease to separate the target protein from the affinity tag. This paper describes a unique protein purification system in which the target protein is fused to the C-terminus of a modified protein splicing element (intein). A small affinity tag is inserted in a loop region of the endonuclease domain of the intein to allow affinity purification. Specific mutations at the C-terminal splice junction of the intein allow controllable C-terminal peptide bond cleavage. The cleavage is triggered by addition of thiols such as dithiothreitol or free cysteine, resulting in elution of the target protein while the affinity-tagged intein remains immobilized on the affinity column. This system eliminates the need for a separate protease and allows purification of a target protein without the N-terminal methionine. We have constructed general cloning vectors and demonstrated single-column purification of several proteins. In addition, we discuss several factors that may affect the C-terminal peptide bond cleavage activity.     

Expression of SMAP-29 cathelicidin-like peptide in bacterial cells by intein-mediated system

In this work, the intein fusion approach was used for expression and purification of cathelicidin-like peptide SMAP-29 from Escherichia coli cultures. To overcome the high toxicity of the antimicrobial peptide against host cells, both C- and N-terminal fusions with Sce VMA intein were evaluated. The fusion of SMAP-29 with the N-terminus of intein had a dramatic lethal effect. In contrast, chimeric constructs harboring SMAP-29 linked to the C-terminus of intein displayed no significant inhibition of bacterial growth. Expression of intein-SMAP fusion protein was then induced in ER2566 E. coli strain by IPTG addition and different experimental conditions were tested in order to optimize the recovery of the soluble protein complex. Peptide purification was carried out by affinity chromatography: the chitin binding domain linked to intein was used to immobilize the chimeric protein on a chitin column and intein-mediated splicing of target peptide was obtained by thiol addition. Microbroth dilution assay showed that recombinant SMAP-29 displayed a high, dose-dependent bactericidal activity. These data demonstrate that the fusion of SMAP-29 with C-intein was able to inactivate the antimicrobial properties of the cathelicidin peptide allowing the expression of fusion protein in the host cell. The intein-mediated purification supplied an effective way to recover the fusion partner in its proper biologically active form.     

Single-column purification of free recombinant proteins using a self-cleavable affinity tag derived from a protein splicing element

A novel protein purification system has been developed which enables purification of free recombinant proteins in a single chromatographic step. The system utilizes a modified protein splicing element (intein) from Saccharomyces cerevisiae (Sce VMA intein) in conjunction with a chitin-binding domain (CBD) from Bacillus circulans as an affinity tag. The concept is based on the observation that the modified Sce VMA intein can be induced to undergo a self-cleavage reaction at its N-terminal peptide linkage by 1,4-dithiothreitol (DTT), β-mercaptoethanol (β-ME) or cysteine at low temperatures and over a broad pH range. A target protein is cloned in-frame with the N-terminus of the intein-CBD fusion, and the stable fusion protein is purified by adsorption onto a chitin column. The immobilized fusion protein is then induced to undergo self-cleavage under mild conditions, resulting in the release of the target protein while the intein-CBD fusion remains bound to the column. No exogenous proteolytic cleavage is needed. Furthermore, using this procedure, the purified free target protein can be specifically labeled at its C-terminus.     

One-step purification and refolding of recombinant photoprotein aequorin by immobilized metal-ion affinity chromatography

A hexahistidine tag was fused to the N-terminus of apoaequorin. A suitable vector encoding the fusion protein was constructed and used for transformation of Escherichia coli JM109 cells. Apoaequorin was overexpressed under the control of tac promoter. It was found, however, that most of the protein existed in the form of inclusion bodies. Inclusion bodies were solubilized with urea, followed by purification and refolding of (His)(6)-apoaequorin in a single chromatographic step by immobilized metal-ion affinity chromatography using Ni(2+)-nitrilotriacetic acid agarose. The purity, as determined by SDS-PAGE analysis, was greater than 80%. The yield was 0.7-1 mg apoaequorin from a 50 ml bacterial culture. The kinetics of light emission of purified aequorin upon addition of Ca(2+) was typical of the commercial aequorin. The luminescence of the purified aequorin was a linear function of its concentration extending over six orders of magnitude. As low as 0.5 attomoles purified aequorin gave a signal-to-noise ratio of 1.8.     

Functional characterization of green fluorescent protein-profilin fusion proteins.

To clarify the role of profilins in cells, fusion proteins constructed with green fluorescent protein (GFP) should be extremely helpful. As profilins are considerably smaller than the GFP fusion partner (14-17 kDa compared with 27 kDa, respectively), we characterized the fusion proteins in vitro, to ascertain their biological function. We fused mouse profilin I and II to either the C-terminus or N-terminus of GFP. These fusion proteins were expressed in Escherichia coli and affinity-purified on polyproline-Sepharose. Interaction with vasodilator-stimulated phosphoprotein, a proline-rich ligand of profilin, was investigated by ELISA, as was binding to PtdIns(4,5)P2. The affinity for actin was quantitatively determined in polymerization assays. Our results show that fusion of GFP to the C-terminus of profilin I abolishes polyproline binding. In contrast, the other fusion proteins bound to polyproline-Sepharose and VASP. Binding to PtdIns(4,5)P2 was not significantly altered. Furthermore, fusion of either isoform with GFP did not decrease the affinity for actin. In localization studies with mammalian cells, all fusion proteins showed the localization expected for profilin in areas of high actin dynamics, such as leading lamellae and ruffles induced by epidermal growth factor. However, with regard to our in vitro data, we suspect that only a minor fraction of profilin I carrying the GFP at the C-terminus can target these sites. Therefore, other constructs should be preferred for further in vivo studies.     

Rational Design of a Carrier Protein for the Production of Recombinant Toxic Peptides in Escherichia coli

Commercial uses of bioactive peptides require low cost, effective methods for their production. We developed a new carrier protein for high yield production of recombinant peptides in Escherichia coli very well suited for the production of toxic peptides like antimicrobial peptides. GKY20, a short antimicrobial peptide derived from the C-terminus of human thrombin, was fused to the C-terminus of Onconase, a small ribonuclease (104 amino acids), which efficiently drove the peptide into inclusion bodies with very high expression levels (about 200–250 mg/L). After purification of the fusion protein by immobilized metal ion affinity chromatography, peptide was obtained by chemical cleavage in diluted acetic acid of an acid labile Asp-Pro sequence with more than 95% efficiency. To improve peptide purification, Onconase was mutated to eliminate all acid labile sequences thus reducing the release of unwanted peptides during the acid cleavage. Mutations were chosen to preserve the differential solubility of Onconase as function of pH, which allows its selective precipitation at neutral pH after the cleavage. The improved carrier allowed the production of 15–18 mg of recombinant peptide per liter of culture with 96–98% purity without the need of further chromatographic steps after the acid cleavage. The antimicrobial activity of the recombinant peptide, with an additional proline at the N-terminus, was tested on Gram-negative and Gram-positive strains and was found to be identical to that measured for synthetic GKY20. This finding suggests that N-terminal proline residue does not change the antimicrobial properties of recombinant (P)GKY20. The improved carrier, which does not contain cysteine and methionine residues, Asp-Pro and Asn-Gly sequences, is well suited for the production of peptides using any of the most popular chemical cleavage methods.