Crystal structure of aclacinomycin methylesterase with bound product analogues: implications for anthracycline recognition and mechanism

Aclacinomycin methylesterase (RdmC) is one of the tailoring enzymes that modify the aklavinone skeleton in the biosynthesis of anthracyclines in Streptomyces species. The crystal structures of this enzyme from Streptomyces purpurascens in complex with the product analogues 10-decarboxymethylaclacinomycin T and 10-decarboxymethylaclacinomycin A were determined to nominal resolutions of 1.45 and 1.95 A, respectively. RdmC is built up of two domains. The larger alpha/beta domain shows the common alpha/beta hydrolase fold, whereas the smaller domain is alpha-helical. The active site and substrate binding pocket are located at the interface between the two domains. Decarboxymethylaclacinomycin T and decarboxymethylaclacinomycin A bind close to the catalytic triad (Ser102-His276-Asp248) in a hydrophobic pocket, with the sugar moieties located at the surface of the enzyme. The binding of the ligands is dominated by hydrophobic interactions, and specificity appears to be controlled mainly by the shape of the binding pocket rather than through specific hydrogen bonds. Mechanistic key features consistent with the structure of complexes of RdmC with product analogues are Ser102 acting as nucleophile and transition state stabilization by an oxyanion hole formed by the backbone amides of residues Gly32 and Met103.     

Domain wise docking analyses of the modular chitin binding protein CBP50 from Bacillus thuringiensis serovar konkukian S4

This paper presents an in silico characterization of the chitin binding protein CBP50 from B. thuringiensis serovar konkukian S4 through homology modeling and molecular docking. The CBP50 has shown a modular structure containing an N-terminal CBM33 domain, two consecutive fibronectin-III (Fn-III) like domains and a C-terminal CBM5 domain. The protein presented a unique modular structure which could not be modeled using ordinary procedures. So, domain wise modeling using MODELLER and docking analyses using Autodock Vina were performed. The best conformation for each domain was selected using standard procedure. It was revealed that four amino acid residues Glu-71, Ser-74, Glu-76 and Gln-90 from N-terminal domain are involved in protein-substrate interaction. Similarly, amino acid residues Trp-20, Asn-21, Ser-23 and Val-30 of Fn-III like domains and Glu-15, Ala-17, Ser-18 and Leu-35 of C-terminal domain were involved in substrate binding. Site-directed mutagenesis of these proposed amino acid residues in future will elucidate the key amino acids involved in chitin binding activity of CBP50 protein.     

Crystal structure of yeast peroxisomal multifunctional enzyme: structural basis for substrate specificity of (3R)-hydroxyacyl-CoA dehydrogenase units

(3R)-hydroxyacyl-CoA dehydrogenase is part of multifunctional enzyme type 2 (MFE-2) of peroxisomal fatty acid beta-oxidation. The MFE-2 protein from yeasts contains in the same polypeptide chain two dehydrogenases (A and B), which possess difference in substrate specificity. The crystal structure of Candida tropicalis (3R)-hydroxyacyl-CoA dehydrogenase AB heterodimer, consisting of dehydrogenase A and B, determined at the resolution of 2.2A, shows overall similarity with the prototypic counterpart from rat, but also important differences that explain the substrate specificity differences observed. Docking studies suggest that dehydrogenase A binds the hydrophobic fatty acyl chain of a medium-chain-length ((3R)-OH-C10) substrate as bent into the binding pocket, whereas the short-chain substrates are dislocated by two mechanisms: (i) a short-chain-length 3-hydroxyacyl group ((3R)-OH-C4) does not reach the hydrophobic contacts needed for anchoring the substrate into the active site; and (ii) Leu44 in the loop above the NAD(+) cofactor attracts short-chain-length substrates away from the active site. Dehydrogenase B, which can use a (3R)-OH-C4 substrate, has a more shallow binding pocket and the substrate is correctly placed for catalysis. Based on the current structure, and together with the structure of the 2-enoyl-CoA hydratase 2 unit of yeast MFE-2 it becomes obvious that in yeast and mammalian MFE-2s, despite basically identical functional domains, the assembly of these domains into a mature, dimeric multifunctional enzyme is very different.     

Insight into the stereochemistry in the inhibition of carboxypeptidase A with N-(hydroxyaminocarbonyl)phenylalanine: binding modes of an enantiomeric pair of the inhibitor to carboxypeptidase A

Both D- and L-isomers of N-(hydroxyaminocarbonyl)phenylalanine () were shown to have strong binding affinity towards carboxypeptidase A (CPA) with D- being more potent than its enantiomer by 3-fold (Chung, S. J.; Kim, D. H. Bioorg. Med. Chem. 2001, 9, 185.). In order to understand the reversed stereochemical preference shown in the CPA inhibition, we have solved the crystal structures of CPA complexed with each enantiometer of up to 1.75 A resolution. Inhibitor L- whose stereochemistry belongs to the stereochemical series of substrate binds CPA like substrate does with its carbonyl oxygen coordinating to the active site zinc ion. Its hydroxyl is engaged in hydrogen bonding with the carboxylate of Glu-270. On the other hand, in binding of D- to CPA, its terminal hydroxyl group is involved in interactions with the active site zinc ion and the carboxylate of Glu-270. In both CPA small middle dot complexes, the phenyl ring in is fitted in the substrate recognition pocket at the S(1)' subsite, and the carboxylate of the inhibitors forms bifurcated hydrogen bonds with the guanidinium moiety of Arg-145 and a hydrogen bond with the guanidinium of Arg-127. In the complex of CPA small middle dotD-, the carboxylate of the inhibitor is engaged in hydrogen bonding with the phenolic hydroxyl of the down-positioned Tyr-248. While the L- binding induces a concerted movement of the backbone amino acid residues at the active site, only the downward movement of Tyr-248 was noted when D- binds to CPA.     

Investigation of the catalytic site within the ATP-grasp domain of Clostridium symbiosum pyruvate phosphate dikinase

Pyruvate phosphate dikinase (PPDK) catalyzes the interconversion of ATP, P(i), and pyruvate with AMP, PP(i), and phosphoenolpyruvate (PEP) in three partial reactions as follows: 1) E-His + ATP --> E-His-PP.AMP; 2) E-His-PP.AMP + P(i) --> E-His-P.AMP.PP(i); and 3) E-His-P + pyruvate --> E.PEP using His-455 as the carrier of the transferred phosphoryl groups. The crystal structure of the Clostridium symbiosum PPDK (in the unbound state) reveals a three-domain structure consisting of consecutive N-terminal, central His-455, and C-terminal domains. The N-terminal and central His-455 domains catalyze partial reactions 1 and 2, whereas the C-terminal and central His-455 domains catalyze partial reaction 3. Attempts to obtain a crystal structure of the enzyme with substrate ligands bound at the nucleotide binding domain have been unsuccessful. The object of the present study is to demonstrate Mg(II) activation of catalysis at the ATP/P(i) active site, to identify the residues at the ATP/P(i) active site that contribute to catalysis, and to identify roles for these residues based on their positions within the active site scaffold. First, Mg(II) activation studies of catalysis of E + ATP + P(i) --> E-P + AMP + PP(i) partial reaction were carried out using a truncation mutant (Tem533) in which the C-terminal domain is absent. The kinetics show that a minimum of 2 Mg(II) per active site is required for the reaction. The active site residues used for substrate/cofactor binding/activation were identified by site-directed mutagenesis. Lys-22, Arg-92, Asp-321, Glu-323, and Gln-335 mutants were found to be inactive; Arg-337, Glu-279, Asp-280, and Arg-135 mutants were partially active; and Thr-253 and Gln-240 mutants were almost fully active. The participation of the nucleotide ribose 2'-OH and alpha-P in enzyme binding is indicated by the loss of productive binding seen with substrate analogs modified at these positions. The ATP, P(i), and Mg(II) ions were docked into the PPDK N-terminal domain crevice, in an orientation consistent with substrate/cofactor binding modes observed for other members of the ATP-Grasp fold enzyme superfamily and consistent with the structure-function data. On the basis of this docking model, the ATP polyphosphate moiety is oriented/activated for pyrophosphoryl transfer through interaction with Lys-22 (gamma-P), Arg-92 (alpha-P), and the Gly-101 to Met-103 loop (gamma-P) as well as with the Mg(II) cofactors. The P(i) is oriented/activated for partial reaction 2 through interaction with Arg-337 and a Mg(II) cofactor. The Mg(II) ions are bound through interaction with Asp-321, Glu-323, and Gln-335 and substrate. Residues Glu-279, Asp-280, and Arg-135 are suggested to function in the closure of an active site loop, over the nucleotide ribose-binding site.     

Crystal structure of the proenzyme domain of plasminogen.

We have solved the X-ray crystal structure of the proenzyme form of the catalytic domain of plasminogen, with the nonessential mutations M585Q, V673M, and M788L, to 2.0 A resolution. The structure presents an inactive protease characterized by Asp740 (chymotrypsinogen 194) hydrogen bonded to His586 (chymotrypsinogen 40), preventing proper formation of the oxyanion hole and S1 specificity pocket. In addition, the catalytic triad residues are misplaced relative to the active conformation adopted by serine proteases in the chymotrypsin family. Finally, a unique form of zymogen inactivation is observed, characterized by a "foot-in-mouth" mechanism in which Trp761 (chymotrypsinogen 215) is folded into the S1 specificity pocket preventing substrate binding.     

Structure of Streptomyces maltosyltransferase GlgE, a homologue of a genetically validated anti-tuberculosis target

GlgE is a recently identified (1→4)-α-d-glucan:phosphate α-d-maltosyltransferase involved in α-glucan biosynthesis in bacteria and is a genetically validated anti-tuberculosis drug target. It is a member of the GH13_3 CAZy subfamily for which no structures were previously known. We have solved the structure of GlgE isoform I from Streptomyces coelicolor and shown that this enzyme has the same catalytic and very similar kinetic properties to GlgE from Mycobacterium tuberculosis. The S. coelicolor enzyme forms a homodimer with each subunit comprising five domains, including a core catalytic α-amylase-type domain A with a (β/α)(8) fold. This domain is elaborated with domain B and two inserts that are specifically configured to define a well conserved donor pocket capable of binding maltose. Domain A, together with domain N from the neighboring subunit, forms a hydrophobic patch that is close to the maltose-binding site and capable of binding cyclodextrins. Cyclodextrins competitively inhibit the binding of maltooligosaccharides to the S. coelicolor enzyme, showing that the hydrophobic patch overlaps with the acceptor binding site. This patch is incompletely conserved in the M. tuberculosis enzyme such that cyclodextrins do not inhibit this enzyme, despite acceptor length specificity being conserved. The crystal structure reveals two further domains, C and S, the latter being a helix bundle not previously reported in GH13 members. The structure provides a framework for understanding how GlgE functions and will help guide the development of inhibitors with therapeutic potential.     

Crystal structure of earthworm fibrinolytic enzyme component a: revealing the structural determinants of its dual fibrinolytic activity

Earthworm fibrinolytic enzyme component A (EFEa) from Eisenia fetida is a strong fibrinolytic enzyme that not only directly degrades fibrin, but also activates plasminogen. Proteolytic assays further revealed that it cleaved behind various P1 residue types. The crystal structure of EFEa was determined using the MIR method and refined to 2.3A resolution. The enzyme, showing the overall polypeptide fold of chymotrypsin-like serine proteases, possesses essential S1 specificity determinants characteristic of elastase. However, the beta strand at the west rim of the S1 specificity pocket is significantly elongated by a unique four-residue insertion (Ser-Ser-Gly-Leu) after Val217, which not only provides additional substrate hydrogen binding sites for distal P residues, but also causes extension of the S1 pocket at the south rim. The S2 subsite of the enzyme was partially occluded by the bulky side-chain of residue Tyr99. Structure-based inhibitor modeling demonstrated that EFEa's S1 specificity pocket was preferable for elastase-specific small hydrophobic P1 residues, while its accommodation of long and/or bulky P1 residues was also feasible if enhanced binding of the substrate and induced fit of the S1 pocket were achieved. EFEa is thereby endowed with relatively broad substrate specificity, including the dual fibrinolysis. The presence of Tyr99 at the S2 subsite indicates a preference for P2-Gly, while an induced fit of Tyr99 was also suggested for accommodation of bigger P2 residues. This structure is the first reported for an earthworm fibrinolytic enzyme component and serine protease originating from annelid worms.     

Structural basis for the activation of phenylalanine in the non-ribosomal biosynthesis of gramicidin S.

The non-ribosomal synthesis of the cyclic peptide antibiotic gramicidin S is accomplished by two large multifunctional enzymes, the peptide synthetases 1 and 2. The enzyme complex contains five conserved subunits of approximately 60 kDa which carry out ATP-dependent activation of specific amino acids and share extensive regions of sequence similarity with adenylating enzymes such as firefly luciferases and acyl-CoA ligases. We have determined the crystal structure of the N-terminal adenylation subunit in a complex with AMP and L-phenylalanine to 1.9 A resolution. The 556 amino acid residue fragment is folded into two domains with the active site situated at their interface. Each domain of the enzyme has a similar topology to the corresponding domain of unliganded firefly luciferase, but a remarkable relative domain rotation of 94 degrees occurs. This conformation places the absolutely conserved Lys517 in a position to form electrostatic interactions with both ligands. The AMP is bound with the phosphate moiety interacting with Lys517 and the hydroxyl groups of the ribose forming hydrogen bonds with Asp413. The phenylalanine substrate binds in a hydrophobic pocket with the carboxylate group interacting with Lys517 and the alpha-amino group with Asp235. The structure reveals the role of the invariant residues within the superfamily of adenylate-forming enzymes and indicates a conserved mechanism of nucleotide binding and substrate activation.     

Movement of the biotin carboxylase B-domain as a result of ATP binding

Acetyl-CoA carboxylase catalyzes the first committed step in fatty acid synthesis. In Escherichia coli, the enzyme is composed of three distinct protein components: biotin carboxylase, biotin carboxyl carrier protein, and carboxyltransferase. The biotin carboxylase component has served for many years as a paradigm for mechanistic studies devoted toward understanding more complicated biotin-dependent carboxylases. The three-dimensional x-ray structure of an unliganded form of E. coli biotin carboxylase was originally solved in 1994 to 2.4-A resolution. This study revealed the architecture of the enzyme and demonstrated that the protein belongs to the ATP-grasp superfamily. Here we describe the three-dimensional structure of the E. coli biotin carboxylase complexed with ATP and determined to 2.5-A resolution. The major conformational change that occurs upon nucleotide binding is a rotation of approximately 45(o) of one domain relative to the other domains thereby closing off the active site pocket. Key residues involved in binding the nucleotide to the protein include Lys-116, His-236, and Glu-201. The backbone amide groups of Gly-165 and Gly-166 participate in hydrogen bonding interactions with the phosphoryl oxygens of the nucleotide. A comparison of this closed form of biotin carboxylase with carbamoyl-phosphate synthetase is presented.     

Biochemical characterization of the chondroitinase B active site

Chondroitinase B from Flavobacterium heparinum is the only known lyase that cleaves the glycosaminoglycan, dermatan sulfate (DS), as its sole substrate. A recent co-crystal structure of chondroitinase B with a disaccharide product of DS depolymerization has provided some insight into the location of the active site and suggested potential roles of some active site residues in substrate binding and catalysis. However, this co-crystal structure was not representative of the actual enzyme-substrate complex, because the disaccharide product did not have the right length or the chemical structure of the minimal substrate (tetrasaccharide) involved in catalysis. Therefore, only a limited picture of the functional role of active site residues in DS depolymerization was presented in previous structural studies. In this study, by docking a DS tetrasaccharide into the proposed active site of the enzyme, we have identified novel roles of specific active site amino acids in the catalytic function of chondroitinase B. Our conformational analysis also revealed a unique, symmetrical arrangement of active site amino acids that may impinge on the catalytic mechanism of action of chondroitinase B. The catalytic residues Lys-250, Arg-271, His-272, and Glu-333 along with the substrate binding residues Arg-363 and Arg-364 were mutated using site-directed mutagenesis, and the kinetics and product profile of each mutant were compared with recombinant chondroitinase B. Mutating Lys-250 to alanine resulted in inactivation of the enzyme, potentially attributable to the role of the residue in stabilizing the carbanion intermediate formed during enzymatic catalysis. The His-272 and Glu-333 mutants showed diminished enzymatic activity that could be indicative of a possible role for one or both residues in the abstraction of the C-5 proton from the galactosamine. In addition, the Arg-364 mutant had an altered product profile after exhaustive digestion of DS, suggesting a role for this residue in defining the substrate specificity of chondroitinase B.     

Structural basis for a change in substrate specificity: crystal structure of S113E isocitrate dehydrogenase in a complex with isopropylmalate, Mg2+, and NADP

Isocitrate dehydrogenase (IDH) catalyzes the oxidative decarboxylation of isocitrate and has negligible activity toward other (R)-malate-type substrates. The S113E mutant of IDH significantly improves its ability to utilize isopropylmalate as a substrate and switches the substrate specificity (k(cat)/K(M)) from isocitrate to isopropylmalate. To understand the structural basis for this switch in substrate specificity, we have determined the crystal structure of IDH S113E in a complex with isopropylmalate, NADP, and Mg(2+) to 2.0 A resolution. On the basis of a comparison with previously determined structures, we identify distinct changes caused by the amino acid substitution and by the binding of substrates. The S113E complex exhibits alterations in global and active site conformations compared with other IDH structures that include loop and helix conformational changes near the active site. In addition, the angle of the hinge that relates the two domains was altered in this structure, which suggests that the S113E substitution and the binding of substrates act together to promote catalysis of isopropylmalate. Ligand binding results in reorientation of the active site helix that contains residues 113 through 116. E113 exhibits new interactions, including van der Waals contacts with the isopropyl group of isopropylmalate and a hydrogen bond with N115, which in turn forms a hydrogen bond with NADP. In addition, the loop and helix regions that bind NADP are altered, as is the loop that connects the NADP binding region to the active site helix, changing the relationship between substrates and enzyme. In combination, these interactions appear to provide the basis for the switch in substrate specificity.     

Dissecting the catalytic mechanism of a plant beta-D-glucan glucohydrolase through structural biology using inhibitors and substrate analogues

Higher plant, family GH3 beta-D-glucan glucohydrolases exhibit exo-hydrolytic and retaining (e-->e) mechanisms of action and catalyze the removal of single glucosyl residues from the non-reducing termini of beta-D-linked glucosidic substrates, with retention of anomeric configuration. The broad specificity beta-D-glucan glucohydrolases are likely to play roles in cell wall re-modelling, turn-over of cell wall components and possibly in plant defence reactions against pathogens. Crystal structures of the barley beta-D-glucan glucohydrolase, obtained from both native enzyme and from the enzyme in complex with a substrate analogues and mechanism-based inhibitors, have enabled the basis of substrate specificity, the mechanism of catalysis, and the role of domain movements during the catalytic cycle to be defined in precise molecular terms. The active site of the enzyme forms a shallow 'pocket' that is located at the interface of two domains of the enzyme and accommodates two glucosyl residues. The propensity of the enzyme to hydrolyze a broad range of substrates with (1-->2)-, (1-->3)-, (1-->4)- and (1-->6)-beta-D-glucosidic linkages is explained from crystal structures of the enzyme in complex with non-hydrolysable S-glycoside substrate analogues, and from molecular modelling. During binding of gluco-oligosaccharides, the glucosyl residue at subsite -1 is locked in a highly constrained position, but the glucosyl residue at the +1 subsite is free to adjust its position between two tryptophan residues positioned at the entry of the active site pocket. The flexibility at subsite +1 and the projection of the remainder of the substrate away from the pocket provide a structural rationale for the capacity of the enzyme to accommodate and hydrolyze glucosides with different linkage positions and hence different overall conformations. While mechanism-based inhibitors with micromolar Ki constants bind in the active site of the enzyme and form esters with the catalytic nucleophile, transition-state mimics bind with their 'glucose' moieties distorted into the 4E conformation, which is critical for the nanomolar binding of these inhibitors to the enzyme. The glucose product of the reaction, which is released from the non-reducing termini of substrates, remains bound to the beta-D-glucan glucohydrolase in the -1 subsite of the active site, until a new substrate molecule approaches the enzyme. If dissociation of the glucose from the enzyme active site could be synchronized throughout the crystal, time-resolved Laue X-ray crystallography could be used to follow the conformational changes that occur as the glucose product diffuses away and the incoming substrate is bound by the enzyme.     

Structural and biochemical characterization of the salicylyl-acyltranferase SsfX3 from a tetracycline biosynthetic pathway

SsfX3 is a GDSL family acyltransferase that transfers salicylate to the C-4 hydroxyl of a tetracycline intermediate in the penultimate step during biosynthesis of the anticancer natural product SF2575. The C-4 salicylate takes the place of the more common C-4 dimethylamine functionality, making SsfX3 the first acyltransferase identified to act on a tetracycline substrate. The crystal structure of SsfX3 was determined at 2.5 Å, revealing two distinct domains as follows: an N-terminal β-sandwich domain that resembles a carbohydrate-binding module, and a C-terminal catalytic domain that contains the atypical α/β-hydrolase fold found in the GDSL hydrolase family of enzymes. The active site lies at one end of a large open binding pocket, which is spatially defined by structural elements from both the N- and C-terminal domains. Mutational analysis in the putative substrate binding pocket identified residues from both domains that are important for binding the acyl donor and acceptor. Furthermore, removal of the N-terminal carbohydrate-binding module-like domain rendered the stand-alone α/β-hydrolase domain inactive. The additional noncatalytic module is therefore proposed to be required to define the binding pocket and provide sufficient interactions with the spatially extended tetracyclic substrate. SsfX3 was also demonstrated to accept a variety of non-native acyl groups. This relaxed substrate specificity toward the acyl donor allowed the chemoenzymatic biosynthesis of C-4-modified analogs of the immediate precursor to the bioactive SF2575; these were used to assay the structure activity relationships at the C-4 position.     

Domain closure,substrate specificity and catalysis of D-lactate dehydrogenase from Lactobacillus bulgaricus

NAD-dependent Lactobacillus bulgaricus D-Lactate dehydrogenase (D-LDHb) catalyses the reversible conversion of pyruvate into D-lactate. Crystals of D-LDHb complexed with NADH were grown and X-ray data collected to 2.2 A. The structure of D-LDHb was solved by molecular replacement using the dimeric Lactobacillus helveticus D-LDH as a model and was refined to an R-factor of 20.7%. The two subunits of the enzyme display strong asymmetry due to different crystal environments. The opening angles of the two catalytic domains with respect to the core coenzyme binding domains differ by 16 degrees. Subunit A is in an "open" conformation typical for a dehydrogenase apo enzyme and subunit B is "closed". The NADH-binding site in subunit A is only 30% occupied, while in subunit B it is fully occupied and there is a sulphate ion in the substrate-binding pocket. A pyruvate molecule has been modelled in the active site and its orientation is in agreement with existing kinetic and structural data. On domain closure, a cluster of hydrophobic residues packs tightly around the methyl group of the modelled pyruvate molecule. At least three residues from this cluster govern the substrate specificity. Substrate binding itself contributes to the stabilisation of domain closure and activation of the enzyme. In pyruvate reduction, D-LDH can adapt another protonated residue, a lysine residue, to accomplish the role of the acid catalyst His296. Required lowering of the lysine pK(a) value is explained on the basis of the H296K mutant structure.     

Alkaline proteinase inhibitor of Pseudomonas aeruginosa: a mutational and molecular dynamics study of the role of N-terminal residues in the inhibition of Pseudomonas alkaline proteinase

Alkaline proteinase inhibitor of Pseudomonas aeruginosa is a 11.5-kDa, high affinity inhibitor of the serralysin class of zinc-dependent proteinases secreted by several Gram-negative bacteria. X-ray crystallography of the proteinase-inhibitor complex reveals that five N-terminal inhibitor residues occupy the extended substrate binding site of the enzyme and that the catalytic zinc is chelated by the alpha-amino and carbonyl groups of the N-terminal residue of the inhibitor. In this study, we assessed the effect of alteration of inhibitor residues 2-5 on its affinity for Pseudomonas alkaline proteinase (APR) as derived from the ratio of the dissociation and associate rate constants for formation of the enzyme-inhibitor complex. The largest effect was observed at position Ser-2, which occupies the S1' pocket of the enzyme and donates a hydrogen bond to the carboxyl group of the catalytic Glu-177 of the proteinase. Substitution of Asp, Arg, or Trp at this position increased the dissociation constant KD by 35-, 180-, and 13-fold, respectively. Mutation at positions 3-5 of the trunk also resulted in a reduction in enzyme-inhibitor affinity, with the exception of an I4W mutant, which exhibited a 3-fold increase in affinity. Molecular dynamics simulation of the complex formation between the catalytic domain of APR and the S2D mutant showed that the carboxyl of Asp-2 interacts with the catalytic zinc, thereby partially neutralizing the negative charge that otherwise would clash with the carboxyl group of Glu-177 of APR. Simulation of the interaction between the alkaline proteinase and the I4W mutant revealed a major shift in the loop comprised of residues 189-200 of the enzyme that allowed formation of a stacking interaction between the aromatic rings of Ile-4 of the inhibitor and Tyr-158 of the proteinase. This new interaction could account for the observed increase in enzyme-inhibitor affinity.     

A closed conformation of Bacillus subtilis oxalate decarboxylase OxdC provides evidence for the true identity of the active site

Oxalate decarboxylase (EC 4.1.1.2) catalyzes the conversion of oxalate to formate and carbon dioxide and utilizes dioxygen as a cofactor. By contrast, the evolutionarily related oxalate oxidase (EC 1.2.3.4) converts oxalate and dioxygen to carbon dioxide and hydrogen peroxide. Divergent free radical catalytic mechanisms have been proposed for these enzymes that involve the requirement of an active site proton donor in the decarboxylase but not the oxidase reaction. The oxidase possesses only one domain and manganese binding site per subunit, while the decarboxylase has two domains and two manganese sites per subunit. A structure of the decarboxylase together with a limited mutagenesis study has recently been interpreted as evidence that the C-terminal domain manganese binding site (site 2) is the catalytic site and that Glu-333 is the crucial proton donor (Anand, R., Dorrestein, P. C., Kinsland, C., Begley, T. P., and Ealick, S. E. (2002) Biochemistry 41, 7659-7669). The N-terminal binding site (site 1) of this structure is solvent-exposed (open) and lacks a suitable proton donor for the decarboxylase reaction. We report a new structure of the decarboxylase that shows a loop containing a 3(10) helix near site 1 in an alternative conformation. This loop adopts a "closed" conformation forming a lid covering the entrance to site 1. This conformational change brings Glu-162 close to the manganese ion, making it a new candidate for the crucial proton donor. Site-directed mutagenesis of equivalent residues in each domain provides evidence that Glu-162 performs this vital role and that the N-terminal domain is either the sole or the dominant catalytically active domain.     

High resolution reaction intermediates of rabbit muscle fructose-1,6-bisphosphate aldolase: substrate cleavage and induced fit

Crystal structures were determined to 1.8 A resolution of the glycolytic enzyme fructose-1,6-bis(phosphate) aldolase trapped in complex with its substrate and a competitive inhibitor, mannitol-1,6-bis(phosphate). The enzyme substrate complex corresponded to the postulated Schiff base intermediate and has reaction geometry consistent with incipient C3-C4 bond cleavage catalyzed Glu-187, which is adjacent by to the Schiff base forming Lys-229. Atom arrangement about the cleaved bond in the reaction intermediate mimics a pericyclic transition state occurring in nonenzymatic aldol condensations. Lys-146 hydrogen-bonds the substrate C4 hydroxyl and assists substrate cleavage by stabilizing the developing negative charge on the C4 hydroxyl during proton abstraction. Mannitol-1,6-bis(phosphate) forms a noncovalent complex in the active site whose binding geometry mimics the covalent carbinolamine precursor. Glu-187 hydrogen-bonds the C2 hydroxyl of the inhibitor in the enzyme complex, substantiating a proton transfer role by Glu-187 in catalyzing the conversion of the carbinolamine intermediate to Schiff base. Modeling of the acyclic substrate configuration into the active site shows Glu-187, in acid form, hydrogen-bonding both substrate C2 carbonyl and C4 hydroxyl, thereby aligning the substrate ketose for nucleophilic attack by Lys-229. The multifunctional role of Glu-187 epitomizes a canonical mechanistic feature conserved in Schiff base-forming aldolases catalyzing carbohydrate metabolism. Trapping of tagatose-1,6-bis(phosphate), a diastereoisomer of fructose 1,6-bis(phosphate), displayed stereospecific discrimination and reduced ketohexose binding specificity. Each ligand induces homologous conformational changes in two adjacent alpha-helical regions that promote phosphate binding in the active site.     

Three dimensional structure of porcine pancreatic alpha-amylase at 2.9 A resolution. Role of calcium in structure and activity.

The crystal structure of porcine pancreatic alpha-amylase (PPA) has been solved at 2.9 A resolution by X-ray crystallographic methods. The enzyme contains three domains. The larger, in the N-terminal part, consists of 330 amino acid residues. This central domain has the typical parallel-stranded alpha-beta barrel structure (alpha beta)8, already found in a number of other enzymes like triose phosphate isomerase and pyruvate kinase. The C-terminal domain forms a distinct globular unit where the chain folds into an eight-stranded antiparallel beta-barrel. The third domain lies between a beta-strand and a alpha-helix of the central domain, in a position similar to those found for domain B in triose phosphate isomerase and pyruvate kinase. It is essentially composed of antiparallel beta-sheets. The active site is located in a cleft within the N-terminal central domain, at the carboxy-end of the beta-strands of the (alpha beta)8 barrel. Binding of various substrate analogues to the enzyme suggests that the amino acid residues involved in the catalytic reaction are a pair of aspartic acids. A number of other residues surround the substrate and seem to participate in its binding via hydrogen bonds and hydrophobic interactions. The 'essential' calcium ion has been located near the active site region and between two domains, each of them providing two calcium ligands. On the basis of sequence comparisons this calcium binding site is suggested to be a common structural feature of all alpha-amylases. It represents a new type of calcium-protein interaction pattern.(ABSTRACT TRUNCATED AT 250 WORDS)     

Structural basis for broad substrate specificity in higher plant beta-D-glucan glucohydrolases

Family 3 beta-D-glucan glucohydrolases are distributed widely in higher plants. The enzymes catalyze the hydrolytic removal of beta-D-glucosyl residues from nonreducing termini of a range of beta-D-glucans and beta-D-oligoglucosides. Their broad specificity can be explained by x-ray crystallographic data obtained from a barley beta-D-glucan glucohydrolase in complex with nonhydrolyzable S-glycoside substrate analogs and by molecular modeling of enzyme/substrate complexes. The glucosyl residue that occupies binding subsite -1 is locked tightly into a fixed position through extensive hydrogen bonding with six amino acid residues near the bottom of an active site pocket. In contrast, the glucosyl residue at subsite +1 is located between two Trp residues at the entrance of the pocket, where it is constrained less tightly. The relative flexibility of binding at subsite +1, coupled with the projection of the remainder of bound substrate away from the enzyme's surface, means that the overall active site can accommodate a range of substrates with variable spatial dispositions of adjacent beta-D-glucosyl residues. The broad specificity for glycosidic linkage type enables the enzyme to perform diverse functions during plant development.