Evaluation of the Effect of a Gamma Irradiated DBM-Pluronic F127 Composite on Bone Regeneration in Wistar Rat

Demineralized bone matrix (DBM) is widely used for bone regeneration. Since DBM is prepared in powder form its handling properties are not optimal and limit the clinical use of this material. Various synthetic and biological carriers have been used to enhance the DBM handling. In this study we evaluated the effect of gamma irradiation on the physical-chemical properties of Pluronic and on bone morphogenetic proteins (BMPs) amount in DBM samples. In vivo studies were carried out to investigate the effect on bone regeneration of a gamma irradiated DBM-Pluronic F127 (DBM-PF127) composite implanted in the femur of rats. Gamma irradiation effects (25 kGy) on physical-chemical properties of Pluronic F127 were investigated by rheological and infrared analysis. The BMP-2/BMP-7 amount after DBM irradiation was evaluated by ELISA. Bone regeneration capacity of DBM-PF127 containing 40% (w/w) of DBM was investigated in transcortical holes created in the femoral diaphysis of Wistar rat. Bone porosity, repaired bone volume and tissue organization were evaluated at 15, 30 and 90 days by Micro-CT and histological analysis. The results showed that gamma irradiation did not induce significant modification on physical-chemical properties of Pluronic, while a decrease in BMP-2/BMP-7 amount was evidenced in sterilized DBM. Micro-CT and histological evaluation at day 15 post-implantation revealed an interconnected trabeculae network in medullar cavity and cellular infiltration and vascularization of DBM-PF127 residue. In contrast a large rate of not connected trabeculae was observed in Pluronic filled and unfilled defects. At 30 and 90 days the DBM-PF127 samples shown comparable results in term of density and thickness of the new formed tissue respect to unfilled defect. In conclusion a gamma irradiated DBM-PF127 composite, although it may have undergone a significant decrease in the concentration of BMPs, was able to maintains bone regeneration capability.     

Bio-composites composed of a solid free-form fabricated polycaprolactone and alginate-releasing bone morphogenic protein and bone formation peptide for bone tissue regeneration

Biomedical scaffolds should be designed with highly porous three-dimensional (3D) structures that have mechanical properties similar to the replaced tissue, biocompatible properties, and biodegradability. Here, we propose a new composite composed of solid free-form fabricated polycaprolactone (PCL), bone morphogenic protein (BMP-2) or bone formation peptide (BFP-1), and alginate for bone tissue regeneration. In this study, PCL was used as a mechanical supporting component to enhance the mechanical properties of the final biocomposite and alginate was used as the deterring material to control the release of BMP-2 and BFP-1. A release test revealed that alginate can act as a good release control material. The in vitro biocompatibilities of the composites were examined using osteoblast-like cells (MG63) and the alkaline phosphatase (ALP) activity and calcium deposition were assessed. The in vitro test results revealed that PCL/BFP-1/Alginate had significantly higher ALP activity and calcium deposition than the PCL/BMP-2/Alginate composite. Based on these findings, release-controlled BFP-1 could be a good growth factor for enhancement of bone tissue growth and the simple-alginate coating method will be a useful tool for fabrication of highly functional biomaterials through release–control supplementation.     

Bone regeneration during distraction osteogenesis: mechano-regulation by shear strain and fluid velocity

Corroboration of mechano-regulation algorithms is difficult, partly because repeatable experimental outcomes under a controlled mechanical environment are necessary, but rarely available. In distraction osteogenesis (DO), a controlled displacement is used to regenerate large volumes of new bone, with predictable and reproducible outcomes, allowing to computationally study the potential mechanisms that stimulate bone formation. We hypothesized that mechano-regulation by octahedral shear strain and fluid velocity can predict the spatial and temporal tissue distributions seen during experimental DO. Variations in predicted tissue distributions due to alterations in distraction rate and frequency could then also be studied. An in vivo ovine tibia experiment evaluating bone-segment transport (distraction, 1 mm/day) over an intramedullary nail was used for comparison. A 2D axisymmetric finite element model, with a geometry originating from the experimental data, was created and included into a previously developed model of tissue differentiation. Cells migrated and proliferated into the callus, differentiating into fibroblasts, chondrocytes or osteoblasts, dependent on the biophysical stimuli. Matrix production was modelled with an osmotic swelling model to allow tissues to grow at individual rates. The temporal and spatial tissue distributions predicted by the computational model agreed well with those seen experimentally. In addition, it was observed that decreased distraction rate (0.5 mm/d vs. 0.25 mm/d) increased the overall time needed for complete bone regeneration, whereas increased distraction frequency (0.5 mm/12 h vs. 0.25 mm/6 h) stimulated faster bone regeneration, as found in experimental findings by others. Thus, the algorithm regulated by octahedral shear strain and fluid velocity was able to predict the bone regeneration patterns dependent on distraction rate and frequency during DO.     

A finite element study of mechanical stimuli in scaffolds for bone tissue engineering

Mechanical stimuli are one of the factors that affect cell proliferation and differentiation in the process of bone tissue regeneration. Knowledge on the specific deformation sensed by cells at a microscopic level when mechanical loads are applied is still missing in the development of biomaterials for bone tissue engineering. The objective of this study was to analyze the behavior of the mechanical stimuli within some calcium phosphate-based scaffolds in terms of stress and strain distributions in the solid material phase and fluid velocity, fluid pressure and fluid shear stress distributions in the pores filled of fluid, by means of micro computed tomographed (CT)-based finite element (FE) models. Two samples of porous materials, one of calcium phosphate-based cement and another of biodegradable glass, were used. Compressive loads equivalent to 0.5% of compression applied to the solid material phase and interstitial fluid flows with inlet velocities of 1, 10 and 100 microm/s applied to the interconnected pores were simulated, changing also the inlet side and the viscosity of the medium. Similar strain distributions for both materials were found, with compressive and tensile strain maximal values of 1.6% and 0.6%, respectively. Mean values were consistent with the applied deformation. When 10 microm/s of inlet fluid velocity and 1.45 Pas viscosity, maximal values of fluid velocity were 12.76 mm/s for CaP cement and 14.87 mm/s for glass. Mean values were consistent with the inlet ones applied, and mean values of shear stress were around 5 x 10(-5)Pa. Variations on inlet fluid velocity and fluid viscosity produce proportional and independent changes in fluid velocity, fluid shear stress and fluid pressure. This study has shown how mechanical loads and fluid flow applied on the scaffolds cause different levels of mechanical stimuli within the samples according to the morphology of the materials.     

Human Urine Derived Stem Cells in Combination with β-TCP Can Be Applied for Bone Regeneration

Bone tissue engineering requires highly proliferative stem cells that are easy to isolate. Human urine stem cells (USCs) are abundant and can be easily harvested without using an invasive procedure. In addition, in our previous studies, USCs have been proved to be able to differentiate into osteoblasts, chondrocytes, and adipocytes. Therefore, USCs may have great potential and advantages to be applied as a cell source for tissue engineering. However, there are no published studies that describe the interactions between USCs and biomaterials and applications of USCs for bone tissue engineering. Therefore, the objective of the present study was to evaluate the interactions between USCs with a typical bone tissue engineering scaffold, beta-Tricalcium Phosphate (β-TCP), and to determine whether the USCs seeded onto β-TCP scaffold can promote bone regeneration in a segmental femoral defect of rats. Primary USCs were isolated from urine and seeded on β-TCP scaffolds. Results showed that USCs remained viable and proliferated within β-TCP. The osteogenic differentiation of USCs within the scaffolds was demonstrated by increased alkaline phosphatase activity and calcium content. Furthermore, β-TCP with adherent USCs (USCs/β-TCP) were implanted in a 6-mm critical size femoral defect of rats for 12 weeks. Bone regeneration was determined using X-ray, micro-CT, and histologic analyses. Results further demonstrated that USCs in the scaffolds could enhance new bone formation, which spanned bone defects in 5 out of 11 rats while β-TCP scaffold alone induced modest bone formation. The current study indicated that the USCs can be used as a cell source for bone tissue engineering as they are compatible with bone tissue engineering scaffolds and can stimulate the regeneration of bone in a critical size bone defect.     

WJSC 6th Anniversary Special Issues（2）:Mesenchymal stem cellsAdipose mesenchymal stem cells in the field of bone tissue engineering

Bone tissue engineering represents one of the most challenging emergent fields for scientists and clinicians.Current failures of autografts and allografts in many pathological conditions have prompted researchers to find new biomaterials able to promote bone repair or regeneration with specific characteristics of biocompatibility,biodegradability and osteoinductivity.Recent advancements for tissue regeneration in bone defects have occurred by following the diamond concept and combining the use of growth factors and mesenchymal stem cells(MSCs).In particular,a more abundant and easily accessible source of MSCs was recently discovered in adipose tissue.These adipose stem cells(ASCs)can be obtained in large quantities with little donor site morbidity or patient discomfort,in contrast to the invasive and painful isolation of bone marrow MSCs.The osteogenic potential of ASCs on scaffolds has been examined in cell cultures and animal models,with only a few cases reporting the use of ASCs for successful reconstruction or accelerated healing of defects of the skull and jaw in patients.Although these reports extend our limited knowledge concerning the use of ASCs for osseous tissue repair and regeneration,the lack of standardization in applied techniques makes the comparison between studies difficult.Additional clinical trials are needed to assess ASC therapy and address potential ethical and safety concerns,which must be resolved to permit application in regenerative medicine.     

Signaling pathways of immobilized FGF-2 on silicon-substituted hydroxyapatite

Therapeutic strategies for bone regeneration involve the selection of suitable biomaterials, growth factors, and cell types to mimic the cellular microenvironment where molecular and mechanical signals control the reconstruction of bone tissue. The immobilization of basic fibroblast growth factor (FGF-2) on powdered silicon-substituted hydroxyapatite (Si-HA) allows to prepare a biofunctional biomaterial able to interact with bone cells in a very specific way. The biological activity of FGF-2/Si-HA, evaluated in Saos-2 osteoblasts and MC3T3-E1 preosteoblasts through the PLCγ and MAPK/ERK signal transduction pathways, shows that FGF-2 immobilized on Si-HA provides the right signals to cells stimulating crucial intracellular mechanisms of osteoblast proliferation and differentiation.     

Use of rhBMP-2 activated chitosan films to improve osseointegration

Considering the design and development of biomaterials used in tissue engineering, not only is it important that they are biocompatible but also that they induce the desired cellular response for tissue regeneration. Chitosan, a biocompatible and bioresorbable polymer of N-acetylglucosamine and glucosamine is used in our work combined with recombinant human BMP-2 (rhBMP-2), a potentially useful activation factor for bone repair. In this way, we try to combine the biological and filmogenic properties of this biopolymer with the osseoinductive ability of the rhBMP-2. Results showed that the chitosan films employed, without and with rhBMP-2 activation, are able to support cellular growth and proliferation on them and that only the rhBMP-2 activated ones are able to differentiate from a myoblastic mouse cell line (C2C12) toward osteoblastic phenotype. Osseoinduction properties of rhBMP-2 activated films persist for a long storage time. The in vivo experiments performed confirm the expectative created by the in vitro results obtained and are an indication that rhBMP-2 activated chitosan films could be a very attractive biomaterial for the enhancement of osseointegration of surgical prostheses and implants and for the purpose of tissue engineering bone regeneration.     

Bone regeneration at the expense of Bioceramic/Hydrogel composite: Clinical evidence

It is often necessary to restore bone structure following the loss of osseous substance. Therefore, the use of bone substitutes made of synthetic calcium phosphate (CaP) ceramics has become more widespread. Granular forms of these biomaterials have demonstrated osteogenic capacities within various sites. Recently, a combination of CaP microporous granules and hydrosoluble polymers was developed (In’Oss?). This composite material is non-self-hardening, injectable, and moldable. The purpose of this non-interventional clinical study was to demonstrate the safety and efficacy of these bioceramic/hydrogel bone substitutes in bone regeneration following maxillofacial surgery. In’Oss? biomaterial was injected into bone defects created by tooth removal in 78 patients. Notably, no infectious or foreign body reactions were reported during at least 17 months of follow up for the study. Regeneration of bone architecture was observed by histomorphometry.     

Three-dimensional Biomimetic Technology: Novel Biorubber Creates Defined Micro- and Macro-scale Architectures in Collagen Hydrogels

Tissue scaffolds play a crucial role in the tissue regeneration process. The ideal scaffold must fulfill several requirements such as having proper composition, targeted modulus, and well-defined architectural features. Biomaterials that recapitulate the intrinsic architecture of in vivo tissue are vital for studying diseases as well as to facilitate the regeneration of lost and malformed soft tissue. A novel biofabrication technique was developed which combines state of the art imaging, three-dimensional (3D) printing, and selective enzymatic activity to create a new generation of biomaterials for research and clinical application. The developed material, Bovine Serum Albumin rubber, is reaction injected into a mold that upholds specific geometrical features. This sacrificial material allows the adequate transfer of architectural features to a natural scaffold material. The prototype consists of a 3D collagen scaffold with 4 and 3 mm channels that represent a branched architecture. This paper emphasizes the use of this biofabrication technique for the generation of natural constructs. This protocol utilizes a computer-aided software (CAD) to manufacture a solid mold which will be reaction injected with BSA rubber followed by the enzymatic digestion of the rubber, leaving its architectural features within the scaffold material.     

Gels prepared from egg yolk and its fractions for tissue engineering

New biomaterials prepared from egg yolk and its main fractions (plasma and granules) have been developed for use in tissue engineering. Protein gels obtained via transglutaminase cross‐linking were characterized by rheometry, texturometry and scanning electron microscopy. All the gels exhibited suitable physical and mechanical characteristics for use as potential biomaterials in skin regeneration. Specifically, results showed that these materials presented a compact, uniform structure, with granular gel being found to be the most resistant as well as the most elastic material. Accordingly, these gels were subsequently evaluated as scaffolds for murine fibroblast growth. The best results were obtained with granule gels. Not only adhesion and cell growth were detected when using these gels, but also continuous coatings of cells growing on their surface. These findings can be attributed to the higher protein content of this fraction and to the particular structure of its proteins. Thus, granules have proved to be an interesting potential raw material for scaffold development. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1577–1583, 2016     

Characterization of a new degradable polymer scaffold for regeneration of the dermis: In vitro and in vivo human studies

Full thickness skin wounds in humans heal with scars, but without regeneration of the dermis. A degradable poly(urethane urea) scaffold (PUUR), Artelon® is already used to reinforce soft tissues in orthopaedics, and for treatment of osteoarthritis of the hand, wrist and foot. In this paper we have done in vitro experiments followed by in vivo studies to find out whether the PUUR is biocompatible and usable as a template for dermal regeneration. Human dermal fibroblasts were cultured on discs of PUUR, with different macrostructures (fibrous and porous). They adhered to and migrated into the scaffolds, and produced collagen. The porous scaffold was judged more suitable for clinical applications and 4 mm Ø, 2 mm-thick discs of porous scaffold (12% w/w or 9% w/w polymer solution) were inserted intradermally in four healthy human volunteers. The implants were well tolerated and increasing ingrowth of fibroblasts was seen over time in all subjects. The fibroblasts stained immunohistochemically for procollagen and von Willebrand factor, indicating neocollagenesis and angiogenesis within the scaffolds. The PUUR scaffold may be a suitable material to use as a template for dermal regeneration.Key words: dermal regeneration, tissue engineering, polymer scaffold, wound healing, in vitro, in vivo, guided tissue regeneration, human, burns     

Development and therapeutic applications of advanced biomaterials

Millions of patients worldwide have benefited from technological innovation from biomaterials. Yet, while life expectancy continues to increase, organ failure and traumatic injury continue to fill hospitals and diminish the quality of life. Advances in understanding disease and tissue regeneration combined with increased accessibility of modern technology have created new opportunities for the use of biomaterials in unprecedented ways. Materials can now be rapidly created and selected to target specific cells, change shape in response to external stimulus, and instruct tissue regeneration. Here we describe a few of these technologies with emphasis on targeted drug delivery vehicles, high-throughput material synthesis, minimally invasive biodegradable shape-memory materials, and development of strategies to enhance tissue regeneration through delivery of instructive materials.     

Hydroxyapatite from Cuttlefish Bone: Isolation,Characterizations, and Applications

Hydroxyapatite (HA), a bioceramic, is a widely utilized material for bone tissue repair and regeneration because of its excellent properties such as biocompatibility, exceptional mechanical strength, and osteoconductivity. HA can be obtained by both synthetic and natural means. Animal bones are often considered a promising natural resource for the preparation of pure HA for biological and biomedical applications. Cuttlefish bone, also called as cuttlebone, mainly consists of calcium carbonate, and pure HA can be produced by adding phosphoric acid or ammonium hydrogen phosphate to it. Recently, cuttlefish bone-derived HA has shown promising results in terms of bone tissue repair and regeneration. The synthesized cuttlefish bone-derived has shown excellent biocompatibility, cell proliferation, increased alkaline phosphate activity, and efficient biomineralization ability with mesenchymal stem cells and osteoblastic cells. To further improve the biological properties of cuttlefish bone-derived HA, bioglass, polycaprolactone, and polyvinyl alcohol were added to it, which gave better results in terms of cell proliferation and osteogenic differentiation. Cuttlefish bone-derived HA with polymeric substances provides excellent bone formation under in vivo conditions. The studies indicate that cuttlefish bone-derived HA, along with polymeric and, protein materials, will be promising biomaterials in the field of bone tissue regeneration.     

Optimized bone regeneration based on sustained release from three-dimensional fibrous PLGA/HAp composite scaffolds loaded with BMP-2

Contemporary treatment of critical bone defect remains a significant challenge in the field of orthopedic surgery. Engineered biomaterials combined with growth factors have emerged as a new treatment alternative in bone repair and regeneration. Our approach is to encapsulate bone morphogenetic protein-2 (BMP-2) into a polymeric matrix in different ways and characterize their individual performance in a nude mouse model. The main objective of this study is to examine whether the PLGA/HAp composite fibrous scaffolds loaded with BMP-2 through electrospinning can improve bone regeneration. The hypothesis is that different loading methods of BMP-2 and different HAp contents in scaffolds can alternate the release profiles of BMP-2 in vivo, therefore modify the performance of scaffolds in bone regeneration. Firstly, mechanical strength of scaffolds and HAp nanoparticles distribution in scaffolds were investigated. Secondly, nude mice experiments extended to 6 weeks were carried out to test the in vivo performance of these scaffolds, in which measurements, like serum BMP-2 concentration, ALP activity, X-ray qualification, and H&E/IHC tissue staining were utilized to monitor the growth of new bone and the changes of the corresponding biochemical parameters. The results showed that the PLGA/HAp composite scaffolds developed in this study exhibited good morphology/mechanical strength and HAp nanoparticles were homogeneously dispersed inside PLGA matrix. Results from the animal experiments indicate that the bioactivity of BMP-2 released from the fibrous PLGA/HAp composite scaffolds is well maintained, which further improves the formation of new bone and the healing of segmental defects in vivo. It is concluded that BMP-2 loaded PLGA/HAp composite scaffolds are promising for bone healing.     

Comparison of the osteogenic potentials of autologous cultured osteoblasts and mesenchymal stem cells loaded onto allogeneic cancellous bone granules

We compared the bone regeneration potentials of autologous cultured osteoblasts and of bone-marrow-derived autologous MSCs in combination with allogeneic cancellous bone granules in a rabbit radial defect model. Radial shaft defects over 15 mm were made in 26 New Zealand white rabbits. The animals underwent insertion of allogeneic cancellous bone granules containing autologous osteoblasts into right-side defects (the experimental group) and of allogeneic cancellous bone granules with autologous MSCs into left-side defects (the control group). To quantitatively assess bone regeneration, radiographic evaluations as well as BMD and BMC measurements were performed 3, 6, 9 and 12 weeks post-implantation and histology as well as micro-CT image analysis were performed at 6 and 12 weeks. Radiographic evaluations 3 weeks post-implantation showed that the experimental group had a higher mean bone quantity index (p < 0.05) and micro-CT image analysis showed that experimental sides had a greater mean total regenerated bone volume and surface area than the control sides (p < 0.05). Histologic evaluations obtained at 6 and 12 weeks revealed distinctly greater granule resorption and new bone formation in the experimental group. This in vivo study demonstrates that a combination of autologous osteoblasts and small-sized, allogeneic cancellous bone granules leads to more rapid bone regeneration than autologous MSCs and small-sized, allogeneic cancellous bone granules.     

Surface porous fibre-reinforced composite bulk bone substitute

The aim of this study was to describe and evaluate the significance of a porous surface with bioactive glass granules (S53P4) covering an artificial bulk material based on polymethylmetacrylate (PMMA) and fibre-reinforced composite (FRC) technology. Effort was focused particularly on characters of the porous surface and biomechanical properties of the material in vitro, and test in vivo the implant in reconstruction in an experimental long bone segment defect model. The defect, 10 mm in length, created in the shaft of rabbit tibia, was reconstructed by the implant and fixed by intramedullary K-wires. The implant was incorporated within 4 weeks by new bone growth from the host bone covering particularly its posterior surface and cortex/implant junctions with bridging trabecular bone. Later, at 8 weeks, new bone was found also at the cortex/implant interface and in the medullary canal of the implant. Histometric measurements revealed direct bone/implant surface contact in 34% at the interface. Bioactive glass granules in the porous surface evoked the most direct contact with bone. The implants manufactured from PMMA only served as a control group, and showed significantly lower osteoconductive properties. Biomechanical measurements in vitro of fibre-reinforced PMMA specimens revealed values for bending strength and the flexural modulus to match them to human bone. This artificial bulk bone material based on PMMA/FRC technology seems to have proposing properties to be used as a bone substitute on load-bearing conditions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Osteoblast mineralization with composite nanofibrous substrate for bone tissue regeneration

Several studies are currently ongoing to construct synthetic bone-like materials with composites of natural and polymeric materials with HA (hydroxyapatite). The present study aims to fabricate composite nanofibrous substrate of Chit/HA (chitosan/HA - 80:25) prepared by dissolving in TFA/DCM (trifluoroacetic acid/dichloromethane) (70:30, w/w) for 5 days and electrospun to fabricate a scaffold for bone tissue engineering. HA (25 wt %) was sonicated for 30 min to obtain a homogenous dispersion of nanoparticles within the Chit (80 wt %) matrix for fabricating composite nanofibrous scaffold (Chit/HA). The nanofibres of Chit and Chit/HA were obtained with fibre diameters of 274 ± 75 and 510 ± 198 nm, respectively, and characterized by FESEM (field emission scanning electron microscopy) and FTIR (Fourier transform infrared). The interaction of hFOBs (human fetal osteoblasts) and nanofibrous substrates were analysed for cell morphology (FESEM), mineralization [ARS (Alizarin Red-S) staining], quantification of minerals and finally identified the elements present in Chit/HA/osteoblasts by EDX (energy-dispersive X-ray) analysis. EDX analysis confirmed that the spherulites contain calcium and phosphorus, the major constituents in calcium phosphate apatite, the mineral phase of the bone. Mineralization was increased significantly (P<0.001) up to 108% in Chit/HA compared with Chit nanofibres. These results confirmed that the electrospun composite Chit/HA nanofibrous substrate is a potential biocomposite material for the proliferation and mineralization of hFOBs required for enhanced bone tissue regeneration.     

Bone Regeneration in Rat Cranium Critical-Size Defects Induced by Cementum Protein 1 (CEMP1)

Gene therapy approaches to bone and periodontal tissue engineering are being widely explored. While localized delivery of osteogenic factors like BMPs is attractive for promotion of bone regeneration; method of delivery, dosage and side effects could limit this approach. A novel protein, Cementum Protein 1 (CEMP1), has recently been shown to promote regeneration of periodontal tissues. In order to address the possibility that CEMP1 can be used to regenerate other types of bone, experiments were designed to test the effect of hrCEMP1 in the repair/regeneration of a rat calvaria critical-size defect. Histological and microcomputed tomography (µCT) analyses of the calvaria defect sites treated with CEMP1 showed that after 16 weeks, hrCEMP1 is able to induce 97% regeneration of the defect. Furthermore, the density and characteristics of the new mineralized tissues were normal for bone. This study demonstrates that hrCEMP1 stimulates bone formation and regeneration and has therapeutic potential for the treatment of bone defects and regeneration of mineralized tissues.     

Ultrastructure of ceramic-bone interface using hydroxyapatite and beta-tricalcium phosphate ceramics and replacement mechanism of beta-tricalcium phosphate in bone

Hydroxyapatite (HA) and beta-tricalcium phosphate (beta-TCP) are useful for grafting and augmentation of bone tissue. Observation by transmission electron microscopy (TEM) was done to investigate the ultrastructures at the interfaces between the biomaterials and the adjacent tissue, and osteogenesis around the biomaterials in the present study. HA and beta-TCP ceramics were used in disk forms which had macropores and micropores, and were implanted between the parietal bone and the cranial periosteum of rats. Specimens were prepared for observation at 4 and 8 weeks postoperatively. The microscopic results indicated that an intervening layer was present on the surface of HA, whereas it was not present on the surface of beta-TCP. A characteristic fibrillar structure was observed in the intervening layer between HA and bone under decalcification by HCl. In beta-TCP, in reticular structures observed close to the bone tissue by optical microscopy, calcification and sparse collagen fibers were interspersed among the granules of beta-TCP. In addition, close to the interface between beta-TCP and bone, many osteocytes with numerous processes were present. Some processes were elongated towards the interface. These results revealed the difference in the ultrastructures of the interfaces between HA and beta-TCP, and the dissolution mechanism of beta-TCP in bone.